The thing you found in your dremel box is a dressing stone. It's used to "Re-Dress" ground stones or other abrasive tooling. Be careful if you use it, The bits go everywhere and are an irritant. Cheers
Adam, my Girlfriend (42) and I (39) have been subscribers and have watched every video for just over a year now. We are both big fans and think you guys are adorable! Keep up the great work! We had friends at SEMA this year in Vegas and had them looking for you two for a selfie... alas they never found you. I think you made 2 new fans when I linked your stuff to my buddies. I also have two license plates from Ohio and a whole PILE of Washington state plates (I work at a local used car lot). If you want them for your future "license plate wall" let me know and we will ship them out.
Adam LZ If your old wheels are a +22 and your new ones are a +25 that means that they have 3mm less offset (aka 3mm closer to the hub) that's why they were rubbing. With your spacers being 22mm vs. 20mm that's leaves you with 1mm less offset.
Love your videos. Just had to mention, if the new wheels are +25 offset and old wheels are +22 then the new wheels are actually 3mm further in. So with the 2mm spacer they are effectively +23 offset which is actually 1mm further in. Awesome videos...keep it up!!
Ahh, gotcha. Didn't even cross my mind they could be Brembos. Noticed them on my friends CTS-V the other day. Might have to pickup a pair for my S13 lol
I don't know if it's just me but there's something really relaxing when I watch a clip of someone cleanly doing tricks with kinda chill cheery music going on
Wow Thanks so much! I have the low beam problem on my 92 Nissan Laurel and have just had the lights set to automatic since ive had it as i could not find the problem! I owe you a beer if you are ever in NZ. Cheers Mike.
Hey Adam, they sell Screw drivers with different type heads. Most people use one screw driver to all their screws and end up stripping them. If the screws are soft enough (assuming they're not holding anything together that can bend like a thin bracket) you can usually use a hammer to drive the screw driver into screw so it can bite. Or use an impact driver. :)
+25 is 3mm further in than +22. with positive offset it'll poke more the smaller the number is, so the spacer you got makes it poke 1mm less than your old one
i have been watching ur videos since the broken spacebar video, but by far my favorite video everrr not just from ur channel but UA-cam itself is "The GRINCH STOLE MY WHEELS" WEBISODE #2 i love all the videos and i thank u for them
I love biking and watching Scotty cranmers videos as soon as they upload but your bike videos are very boring. I liked some of your old videos but lately these new ones are extremely boring. I don't like the angles and it's just shots of you doing tricks with horrible background music. Take notes of Scotty's channel. Love the car videos tho
Was literally waiting for the video, Once again... Enjoying you stuff Especially the car stuff! Good Luck on Saturday! And i hope to see a BUTT load of footage... Thanks Adam!
Oh Adam.. given that the width is the same on both wheels, an ET25 wheel will be 3mm further INSIDE compared to an ET22 wheel. That's just how offset works - the lower the number, the more outward the wheels are and vice versa. Getting 2mm wider spacers will mean that your wheels are now 1mm further in. However, if the new wheels are wider (or narrower) that just changes everything :D Keep at it and dee a burnoot!
Hey Adam, you have the offset backwards. If you have a wheel with +22 offset and another one with +25, the one with +25 will sit 3mm in more than the +22, one not further out
BE CAUTIOUS!!!!! Although the wheels fit, make sure when they are balanced, the wheel weights don't hit the calipers and chip the paint. Also i recommend getting said wheel weights re-applied often so they are less likely to ever to come off while the wheel is spinning I have an evo x, and i have this exact problems with my aftermarket wheels being so close to the caliper, and i have had a wheel weight come off presumably when i was driving. It made some pretty nasty gouges in my brembo calipers.. Just something to think of and be cautious of ;)
Adam! If they are 25, and the others were 22, the cosmis ARE 3mm further IN, not OUT! (just a little correction) KEEP IT UP, really love your stuff man!!
Adam if the specs on the wheel are what you said then a higher offset is IN farther not out. So really they are 3mm farther IN than out vs your white wheels. +22 is out farther than +25.
Talk about making your dreams and reality! Dude, when you started riding, think back, was it not a dream come true to have an entire skatepark to ride in your backyard all to yourself. Just imagine how far you would be in the BMX game if you had this to practice on when you started to really ride BMX? That's insane. You would be a world class rider right now. LZ bmx! Hey what did you think of Spencer's vlogging video? Hilarious. You really should spread the love and invite him to your new backyard ramp.✌🖒🖒🚵🍋🍋🍋
from around 1:35 the music matches perfectly with the riding. Also, Adam, are you planning on doing a backflip over the boxjump? that you don't land on top but clear the whole box you know
James is my favorite person ever.
Well and Jimmy.
Taylor Ray whos jimmy hes like on everyones channel haggard, lz, yours
Taylor Ray don't forget Taylor Ray. He seems awesome too.
You forgot Kevin.
i like the guy with the beard i dont remember his name tho he just bought a corvette
The thing you found in your dremel box is a dressing stone. It's used to "Re-Dress" ground stones or other abrasive tooling. Be careful if you use it, The bits go everywhere and are an irritant.
Cheers
hey Adam you should do a collaboration with the Scotty Cranmer crew
BirdMan brooooooo, that'd be awesome
BirdMan hey everyone, like this so he can see it
BirdMan Hell yea boi
Cranmer crew is 100 times better. Adam talks way to much about hes feelings and other whiny stuff.
Would be nice to see them try that sick backyard park tho =)
Great video Adam! I love the mix of auto and bmx in this! We really appreciate your effort to make entertainment for all fans!
See you at the track ;) Hopefully we can get some tandem runs!
Yeees!
AMBush Drift what track is it desoto speedway
Cash Adam at the track how bout dah
see you at the track how bout that?
The relationship between you and the guys in your company is brilliant! You must be the most chilled owner of a business ever....
Flair at 1.5 million subs
Noah Peltier yes but he will never do it again
Adam, my Girlfriend (42) and I (39) have been subscribers and have watched every video for just over a year now. We are both big fans and think you guys are adorable! Keep up the great work! We had friends at SEMA this year in Vegas and had them looking for you two for a selfie... alas they never found you. I think you made 2 new fans when I linked your stuff to my buddies. I also have two license plates from Ohio and a whole PILE of Washington state plates (I work at a local used car lot). If you want them for your future "license plate wall" let me know and we will ship them out.
If you buy 100 you get 50 free* :D
hella-flush didn't think I would see you here :)
hella-flush Not quite, try 33
no he was right... lol
Connor Robinson No, if you buy 100 you get 50 free. Buy two, get one free - 2x50 = 100, so 1x50 (the free set) = 50.
wrong. Buy 2 get one free means buy 100 get 50 free. 50x2=100
I absolutely loved the start of the vlog how after minimal talking it went to a sick little edit themed clip... keep it up Mr LZ killin' the scene!!
cash me out side how bout dat
Is it Cash or Catch me outside?
Green H. The meme is cash
catch*
*ousside
There's 100 different ways to spell it
I really enjoyed the music during the riding clips. It was refreshing to see after most people have been moving away from it.
So am I the only one who saw the black spot on the garage door??? 240 shooting flames?
*coal from cummins swap leaked*
Adam LZ you should put a big Adam lz logo on your skate park
Maybe Nicole tried to drive it and it caught on fire again.
Boni Hollóssy savage 😂😂😂👍
car been on with garage door down. exhaust fumes of rich tune
Adam LZ
If your old wheels are a +22 and your new ones are a +25 that means that they have 3mm less offset (aka 3mm closer to the hub) that's why they were rubbing.
With your spacers being 22mm vs. 20mm that's leaves you with 1mm less offset.
+22 stick out further than +25
XtasicRider I'm just saying that in the video he says that +25 sticks out further than +22 which is incorrect.
Love your videos. Just had to mention, if the new wheels are +25 offset and old wheels are +22 then the new wheels are actually 3mm further in. So with the 2mm spacer they are effectively +23 offset which is actually 1mm further in. Awesome videos...keep it up!!
Hey Adam, quick question: Why CTS-V Calipers on the 240?
+Edd McLaren they are 4 piston Brembos for super cheap
Ahh, gotcha. Didn't even cross my mind they could be Brembos. Noticed them on my friends CTS-V the other day. Might have to pickup a pair for my S13 lol
I'm confused,, is the 2JZ in the 240?
no
Adam LZ you should get a corgi
Adam LZ get a dg
Dog
Kyle DiFrancia not yet
Adam you should get a Dog!
fvzz drift dog!!
306MediaProductions Yes!
306MediaProductions 2JZ Twin Turbo Dog!
have you guys seen Jett the drift dog? his owner has a red JZX81.
fvzz Dodge? Mabye a Challenger?
I don't know if it's just me but there's something really relaxing when I watch a clip of someone cleanly doing tricks with kinda chill cheery music going on
7:41
I was actually about to comment Whale Tail but then I saw your comment
Patrick Irons mmmm mmm mm
Dude your skin looks good af. Glad you finally got it sorted out.
if the new wheels are +25 and your old ones were +22. Wouldnt that mean your old wheels stuck out further
yes. i wish people would research offset more. they would only have to watch a 3 minute video explaining it.
I love watching y'all play on the ramp, CONGRATS AGAIN
are you ever gonna convert the headlights to leds?? kinda like how it was on Taylor's miata??
Wow Thanks so much! I have the low beam problem on my 92 Nissan Laurel and have just had the lights set to automatic since ive had it as i could not find the problem! I owe you a beer if you are ever in NZ. Cheers Mike.
Wait what, you cant change the bulbs in 240? xD
nope, old school sealed beam headlight where when the bulb goes out you change the whole assembly
Wesley Green Most be a little expensive and probally really bad light on the road at night :D
I've had two 180sx and they are not sealed beam. Looks like they are but there not. You can change just the bulb.
us vs non usa cars i feel is the answer here. no us spec lights put out more light too so win win
Hey Adam, they sell Screw drivers with different type heads. Most people use one screw driver to all their screws and end up stripping them. If the screws are soft enough (assuming they're not holding anything together that can bend like a thin bracket) you can usually use a hammer to drive the screw driver into screw so it can bite. Or use an impact driver. :)
once the park starts getting black marks everywhere you should let some (GOOD) local graffiti artists come hit it
Would be sick!
SourLemonSeed fuck em
SourLemonSeed what do the neighbors have to do with his ramp
how is he gonna find local writers and if you mean street artists thats not graffiti.
SourLemonSeed his neighbors probably don't like the ramp in the first place 😂😂😂
+25 is 3mm further in than +22. with positive offset it'll poke more the smaller the number is, so the spacer you got makes it poke 1mm less than your old one
Wow I'm pretty sure you're right and I'm an idiot. I gotta double check the wheels
You are right. Heck yea, you just saved me a lot of unnecessary headache. Can I like send you some merch or something as a thank you? hahahaha
+Dags BMX lucky ducky, free lzbmx merch!
Adam LZ No problem man, @Officialdags on Instagram if you want to dm me on there ill send you my address
Did anyone else pause it on 7:41
1:37 THAT WAS AMAZING TIMING WITH THE SONG
SmurfC. Tech, Gaming, and More! lol so true
I don't get paid until Friday :(
CapnFlappyJaw it's your fault for not tracking your finances and not having money until your next paycheck lol.
Leois12 can't pay my rent cause all my money spent. got a quarter tank of gas in my new e-class but I'm still fly
I admire how smart Adam is with his money and everything he really has his shit together keep grinding homie
do you by any chance ship international? like to the United Arab Emirates?
Yep!
thank you!
Adam LZ that's always good for all the fans around the world
ali azari Q
Those contacts, man that reminds of a lot of 90's shit.
Easy little fixes like that make my day. I like the ride, she looks good!
tire of that meme cash me outside howbow dah
Anthony Perez tire? Where would you find that, I'll put that on my car
kale hiebert tired*
Really enjoyed the ramp edit, the music was perfect.
wow im early!
yes alex. you are early.
That moment when I give Adams videos a thumbs up even before seeing the video
lol yes!
too :D
i hate it to work with Plastic... i brake everything
i have been watching ur videos since the broken spacebar video, but by far my favorite video everrr not just from ur channel but UA-cam itself is "The GRINCH STOLE MY WHEELS" WEBISODE #2 i love all the videos and i thank u for them
I love biking and watching Scotty cranmers videos as soon as they upload but your bike videos are very boring. I liked some of your old videos but lately these new ones are extremely boring. I don't like the angles and it's just shots of you doing tricks with horrible background music. Take notes of Scotty's channel. Love the car videos tho
the white wheels look so much better in my opinion, they really fit the style and colour of the car.
First
James Kennedy yes u are
I'd like to take this opportunity ask Adam, How'd you and Nicole meet?
There's definitely a video on that
this is such a great video. Loved the editing, music tied in and you look like your having fun and seem more relaxed. Keep up the awesome work
Can I get no likes or comments
Bryce 930 f
Hey Adam that slide of the rail was pretty dam cool
Was literally waiting for the video, Once again... Enjoying you stuff Especially the car stuff! Good Luck on Saturday! And i hope to see a BUTT load of footage... Thanks Adam!
Just got shafted on my AP Government final but your video made my day better Adam thanks!
Oh Adam.. given that the width is the same on both wheels, an ET25 wheel will be 3mm further INSIDE compared to an ET22 wheel. That's just how offset works - the lower the number, the more outward the wheels are and vice versa. Getting 2mm wider spacers will mean that your wheels are now 1mm further in. However, if the new wheels are wider (or narrower) that just changes everything :D
Keep at it and dee a burnoot!
Do more of those montage type edits, I love them!
I love the style of the beginning of the video with the edit!!! keep it up!!!
Love the early uploads! I feel like I'm running out of stuff to watch!! Keep it up Adam!
I'm so happy Adam starting doing these vlogs daily anyone else?
Hey Adam, you have the offset backwards. If you have a wheel with +22 offset and another one with +25, the one with +25 will sit 3mm in more than the +22, one not further out
Loving the daily uploads adam! Glad to see your doing so well in life bud!
I love the combination of cars and vlogging it's such a good mix
ADAM GREAT LIFE GOAL. Build a skate park near by and manage it. Great investment and close park for rides whenever!!!!
You are my favorite UA-camr ever keep it up
you can buy a conversion housing. tht then allows you to put in your own bulb from stock hid or led. i have same type of housing with leds in them.
They make a h4 conversion for the headlights you have. They also have them in LED.
The first 2 minutes of this video reminded me of an old props video. FLASHBACK!! I enjoyed it, but not for every video. Keep up the good work, CHEERS!
James seems like a chill dude who loves working for a Friend
Haven't seen the riding filmed like that forever on this channel more stuff like that would be cool!!!
The tricks at 1:40 made my day :O shout out to him !!!
My bro!! I think I need to do that to my light switch too. Thanks man! I'll let you know how it goes
Wow that whole flair camera toss thing was amazing
Love these sorts of videos doing bits on the cars
yessss have a crazy kart session on the ramp!
the soft music to full music was so great
BE CAUTIOUS!!!!! Although the wheels fit, make sure when they are balanced, the wheel weights don't hit the calipers and chip the paint.
Also i recommend getting said wheel weights re-applied often so they are less likely to ever to come off while the wheel is spinning
I have an evo x, and i have this exact problems with my aftermarket wheels being so close to the caliper, and i have had a wheel weight come off presumably when i was driving. It made some pretty nasty gouges in my brembo calipers..
Just something to think of and be cautious of ;)
hey Adam next year put a foam pit or rezi in your backyard so you can relearn backflips!!
the video quality has gone up! it's now like he tries harder and doesn't just slap a vud together. keep it up!
i like the way you edited this video man keep up the good work
Adam!
If they are 25, and the others were 22, the cosmis ARE 3mm further IN, not OUT! (just a little correction)
KEEP IT UP, really love your stuff man!!
Keep it up adam your channel can only grow road to 5 mil i will be here when it happens
Those wheels are sick!
Awesome video, but this song is absolutely incredible!
You should make a wall or board by the backyard park and have everyone who has ridden it sign it
on my mx5, one of the relay switches under the hood corroded on the inside from use and had to be sanded...drove for over a year with just high beams
I like the flow of this video. its a little different from your others. song choice is also quiet nice! keep it up man!
james carries around a little chair for his dog? I like him, he's a good guy
Hey Adam put lights that point towards the floor , something kinda like projection lights they use for shows and concerts , with animation
Nichole is actually a goat she's underrated.shes slick funny too
love the edits with the new music!
Adam if the specs on the wheel are what you said then a higher offset is IN farther not out. So really they are 3mm farther IN than out vs your white wheels. +22 is out farther than +25.
What a great situation I come home and you upload a video
HAHAHA Nicoles last words "catch me outside, how bout that" she with it
You should get Scotty Cranmer army on these ramps.
digging the song used for the bmx clips
You should see if you can put up some lights to light up the BMX Park lol. Would look awesome.
I have no clue what Is happening but it is still fun to watch.
hahahaha! same thing on my 240.. Have to just bend it down to change the light
Adam you could put LED strip lighting around the entire ramp and maybe on all the copings to keep it lit at night.
Can't wait for the lz car mats
The back yard edits remind me of the old webisods
Those are some DOPE BEATS BRO!
Talk about making your dreams and reality! Dude, when you started riding, think back, was it not a dream come true to have an entire skatepark to ride in your backyard all to yourself. Just imagine how far you would be in the BMX game if you had this to practice on when you started to really ride BMX? That's insane. You would be a world class rider right now. LZ bmx! Hey what did you think of Spencer's vlogging video? Hilarious. You really should spread the love and invite him to your new backyard ramp.✌🖒🖒🚵🍋🍋🍋
You should definitely consider doing a collab with the Scotty Cranmer crew 🔥🔥👍🏼
8:55 did you slow mo that for her voice or..
from around 1:35 the music matches perfectly with the riding.
Also, Adam, are you planning on doing a backflip over the boxjump? that you don't land on top but clear the whole box you know
Adam you should invest to a hand held gas leaf blower to clean the park when needed