When I boot up my pc it send me to the Bios instantly, it doesn't detect the ssd, if I had to update it how would I do it since I cannot access to windows????
Same problem. My Windows is installed on the SSD, and it isn't detected so I don't get further than the BIOS. I switched wires, etc. Still not detected. So my SSD is fried?
@@panzerfist It's not fried, What may help is switching your Boot Mode from UEFI mode to Legacy mode or vise versa. You can find this in your BIOS setting under Boot Options
Mine problem is, I am unable to change boot order from hdd to ssd. Windows is already installed in ssd, it's opening properly as well. But in boot order I see only hdd drive, CD dvd diskette, CD dvd drive, USB only. My boot order is currently set to hdd drive, how can I change it to ssd drive? My ssd drive is showing in laptop after opening windows but in bios order I can't see it, why?
Well i have a solution but it's a bit lengthy start the boot menu in hp laptop it's escape and then F9 the go to the boot from efi file then select you nvme or sata drive hope it help👍
Hello , i have laptop and while cleaning i didn't see that it was start booting and that moment removed the Rams from the system and because of that SSD got currupt or idk what happened . Now my laptop didn't recognize the NVme SSD i checked it with enclosure its also not showing in other systems. is there any solution .
My SSD is being detected in Windows and I was able to use it like storing files and installing games. There's also OS installed to it so whenever I boot my PC, I have to select between two OS (from old HDD and my SSD). It is annoying but I was used to it. The problem now is my HDD had issues booting up recently which does not bring up the options to select which OS to boot. For some reason, I can only boot from my SSD whenever my HDD is there. I tried the following - 1. Remove the old HDD - but my system does not detect my SSD as bootable device (it seems it has been detected because I can see my SSDs name in the monitor display but not detecting it as a bootable device, just storage i guess?) 2. Put the old HDD back - it is trying to boot but just black screen for hours, no good at all 3. Disconnected/reconnected all cables to both HDD and SSD - (tried switching them too) 4. Other component seems fine, just my drives are acting up not letting me boot from them - SSD - Kingston 480GB 2.5 HDD - Baracuda 1 TB My pc is dead now for a week and I was thinking of buying new components since it is almost 10 yrs now since I had this pre-built computer
My storage device doesn't show up on disk management whatsoever but my laptop says it's connected. I'm confused i only got the storage device today its completely new
Actually in my laptop i installed ssd and after that i cloned c drive to the respective ssd and then i am trying to boot os manager with ssd but pc when restarts takes me to the bios again
why is my ASUS ROG Strix B450 F Gaming ,not detecting or showing m.2 nvme 970 evo plus in ez mode? it always show N/A but i can normally boot it. I even enable the csm mode but still not showing up.
Dear Sir,@@AOMEITech actually it is suddenly disappeared. My mobo system information (not showing in my ssd) only hdd shows that, is that mean my ssd is death? another thing that if my mobo bios System information don't detect my ssd then how can i know that my ssd is work or not?
@@yzx9122 1. You want to boot from the SSD but you cannot find it in BIOS booting option, is this the right description of your issue? 2. Is this SSD an internal one or an external one? You may install it on another PC to check if it's a connection problem.
I used AOMEI to convert my OS SSD from MBR to GPT, conversion was successful, however when I switch my Boot Mode from Legacy to UEFI, my SSD is not detected in UEFI mode. How do I solve this? Thanks in advance.
Hello can i get a help here. I have Lenovo z50-70 series. Just upgraded my hdd to ssd by cloning to make my ssd act as main and use the hdd as a storage device using caddy. The problem is i can't make my sdd to be my first system priority when it comes to booting.. but apart from that everything is fine.
Hi... I got a problem went my pc keep restarting and show my device ran into problem.. then i try press key F11 and the first boot device show HDD and sec also showing HDD ... So im really confused right now that my pc just keep repeating restarting... Please help 😂
Hi can i get help.tried all the options in automatic repair options all didnt work even the command prompt lines Last sort i did is to clean install windows10,but it doesnt fucking detects the hdd in the formatting windows .but it detects in bios. Is the hdd needs to be replaced already?
So I have a problem, I wanna check my SSD Size on BIOS but for some reason, SSD isn't showing up, it only shows HHD0 and HHD1, So I don't know if I have a slot available for ssd or not. I can still use my SSD for things so it clearly isn't defective I have nitro 5 an515-54
I bought a cheap ssd it was working 100% after trying to cloning to my main hd i accidentally wiping it and the partition now it only showing sometimes in bios and not in computer management my i deleted the firmware and it's broken please can you advice me what can i do i tried everything even watching videos online
i used the free mini tool partition to clone my windows 11 pro from an old ssd to a new ssd and it boots up succesfully, but NOT showing in bios and there is NO IDE mode in sata options!! i have a dell latitude e6540 laptop,, everything works fine,, just can't get bios to recognize my crucial 2 tb ssd😢😢😢😢
Hello, i tried installing an NVME M.2 PCIE 4gen ssd of 4 to on my MSI motherboard and it didn't work out, my bios don't even open and my monitor show black screen when powering my pc on. Can you please help me with this ? thank you!
I bought an m.2 ssd to upgrade my pc when i put it in my sata ssd wasn't showing anymore and it asked me to chose a priority boot with the windows but i couldn't only my hard disk and the new ssd showed up
This is weird i cant turn on my pc properly in my case my bios detects my ssd it shows up but it says it has 20 megabytes and in other place of the bios it says it has 0 gb whenever i let it turn on it shows the black screen that tells u to plug in a disk or usb and sometimes just sometimes actually turns on as nothing happened and as long as i keep it on it works perfectly but if i dare to turn it off i wont be able to turn it on on the rest of the day its so weird its like if the pc was purposely not letting me turn the pc on more than once per day pls help t-t its probably my ssd dying or thats my guess
My newly installed m.2 ssd isnt showing up on bios, but I still have my sata ssd that have windows in it, so I tried all the methods and nothing worked... do you think my mobo does not support m.2 sata ssd only nvme? Is that even possible?
If you've tried all the methods but still don't work, it has the possibility that your MOBO doesn't support it, you may consult the manufacturer of the MOBO or PC.
Bro in my case in boot sequence I have only three option two are only say Windoys Boot Manager and 3rd is UEFI:CT500P3SSD8, Partition 1....I have no other option I just cloned hdd to ssd and want to set ssd as boot priority .....but not show my ssd model as yours ....plz help
Same problem .. I was watching video on my laptop and suddenly it restarted and bios khul gaya and now I am not able to see any storage in my bios as i have only SSD in my laptop and ssd is not showing
Hi, so I've recently built a PC but when i went to install my OS, i found that i have only 2.0 MB of memory available. This made no sense since i knew i put in a 2TB SSD in it. I checked in the bios, and SSD itself does appear, however it's not showing the size. I've updated my bios to the latest version, but its the same. It can't be misplaced, If the SSD wasn't placed properly it shouldn't be detected at all right? Could it be a compatibility problem? When i bought it, i checked and it did say it was compatible with PC and Laptops. However, i did buy it on amazon... so i am tempering my expectations.
to add some details : the sata config "IDE" is not available in my bios I did boot from a small usb key, used the repair option and tried various prompts in the cmd. nothing works and I still cannot see the ssd. also when this usb key is not plugges in, my "boot priority" is completely empty, 0 option available 💀
@@AOMEITech Hi, thanks for the suggestion. I cannot check that sadly, I just put the SSD on another PC (desktop) in a M.2 slot. 1st strange thing is that IDE isn't an available option in this PC's bios either so idk if that plays a role. Also I've downloaded a Partition Program, the SSD is not visible anywhere, I cannot ChkDsk on it and cannot seem to repair/recover/clone it with the program. Do you have other troubleshooting ideas for this ?
@@stoicbaguetteSounds like this SSD has bad sectors on it, I suggest you take it out to a repair shop to check and see if it can be fixed, or it's hard to find out the issue by yourself.
Please help me, my cloned ssd won't show in the boot options, only my hdd shows. But when I go to Boot Override, there shows my Hdd and Ssd. I just need to make my cloned ssd my default boot priority :3
When I boot up my pc it send me to the Bios instantly, it doesn't detect the ssd, if I had to update it how would I do it since I cannot access to windows????
Do you only have the SSD on your PC?
Same problem.
My Windows is installed on the SSD, and it isn't detected so I don't get further than the BIOS. I switched wires, etc. Still not detected. So my SSD is fried?
@@panzerfist It's not fried, What may help is switching your Boot Mode from UEFI mode to Legacy mode or vise versa. You can find this in your BIOS setting under Boot Options
@@brolyventures I did this multiple times. My SSD doesn't show up in Bios
@@panzerfist did your issue get fixed?
Jokes on you my computer shows my ssd as hdd
Thank you for the info... It helps me a lot to understand it better
unplugging my harddrive seemed to work for me. Love you guys :D
Same
Legacy turn disabled
Mine problem is, I am unable to change boot order from hdd to ssd. Windows is already installed in ssd, it's opening properly as well. But in boot order I see only hdd drive, CD dvd diskette, CD dvd drive, USB only. My boot order is currently set to hdd drive, how can I change it to ssd drive? My ssd drive is showing in laptop after opening windows but in bios order I can't see it, why?
i have the same issue
@@Storm-hd6tu did you find the way?
Well i have a solution but it's a bit lengthy start the boot menu in hp laptop it's escape and then F9 the go to the boot from efi file then select you nvme or sata drive hope it help👍
Same problem, I can't fix it
@@invisiblemutant4460 did u fix?
The bios method saved me thanks a lot ❤
But my Bios came with a Password and I don't know it's password, cannot reset this password cause it's on Laptop.
Bro i love you, you fixed my computer thanks so much!
So glad to hear that!
Hey i bought a compatible ssd m.2 2280 evm ssd which my dell g15 suits but it is not showing up in bios and also unable to change to ide. Please help
worked for me by Aomei backupper... thanks
Hello ,
i have laptop and while cleaning i didn't see that it was start booting and that moment removed the Rams from the system and because of that SSD got currupt or idk what happened . Now my laptop didn't recognize the NVme SSD i checked it with enclosure its also not showing in other systems.
is there any solution .
My SSD is being detected in Windows and I was able to use it like storing files and installing games. There's also OS installed to it so whenever I boot my PC, I have to select between two OS (from old HDD and my SSD). It is annoying but I was used to it. The problem now is my HDD had issues booting up recently which does not bring up the options to select which OS to boot. For some reason, I can only boot from my SSD whenever my HDD is there. I tried the following -
1. Remove the old HDD - but my system does not detect my SSD as bootable device (it seems it has been detected because I can see my SSDs name in the monitor display but not detecting it as a bootable device, just storage i guess?)
2. Put the old HDD back - it is trying to boot but just black screen for hours, no good at all
3. Disconnected/reconnected all cables to both HDD and SSD - (tried switching them too)
4. Other component seems fine, just my drives are acting up not letting me boot from them -
SSD - Kingston 480GB 2.5
HDD - Baracuda 1 TB
My pc is dead now for a week and I was thinking of buying new components since it is almost 10 yrs now since I had this pre-built computer
My storage device doesn't show up on disk management whatsoever but my laptop says it's connected. I'm confused i only got the storage device today its completely new
Did Disk Management ask you to initialize the disk?
I'm DONE with WIndows at this point, time to cave in and switch to Linux for good
Thanks a lot, removing the old HDD physically from the PC and reformatting the NVMe and reloading windows back into it was my FIX.
Thinking about doung that
i dont see ide only raid and ahci
My ssd doesnt even show up in disk management on one computer but works and boots up perfectly fine on another.
What if the ssd doesnt show up in bios and disk management. Mine is Brand New and doesnt work
Could you try to connect it or install it to another computer to see if it's due to some connection error.
@@AOMEITech nvm i Figuren it out. The ssd Port has more connectors than the cable I bought🤣
How its not showing in BIOS and i cant even open system?
Sata I I I disc and ga-z97x-gaming 3
Try the methods in this video.
@@AOMEITech it worked ig, I Had second cable which worked
Actually in my laptop i installed ssd and after that i cloned c drive to the respective ssd and then i am trying to boot os manager with ssd but pc when restarts takes me to the bios again
why is my ASUS ROG Strix B450 F Gaming ,not detecting or showing m.2 nvme 970 evo plus in ez mode? it always show N/A but i can normally boot it. I even enable the csm mode but still not showing up.
You can refer to our support team via email if you are looking for further help.
My ssd (win 10 is there)
Asus b150 mobo there is not show that,only my hdd show
I cant able to open win 10
Help me
Did you set the SSD as the first boot option and UEFI boot mode?
Dear Sir,@@AOMEITech actually it is suddenly disappeared.
My mobo system information (not showing in my ssd)
only hdd shows that,
is that mean my ssd is death?
another thing that if my mobo bios System information don't detect my ssd then how can i know that my ssd is work or not?
@@yzx9122 1. You want to boot from the SSD but you cannot find it in BIOS booting option, is this the right description of your issue?
2. Is this SSD an internal one or an external one? You may install it on another PC to check if it's a connection problem.
@@yzx9122Bro, I am facing exactly same problem, can u help me ??😢
I used AOMEI to convert my OS SSD from MBR to GPT, conversion was successful, however when I switch my Boot Mode from Legacy to UEFI, my SSD is not detected in UEFI mode. How do I solve this? Thanks in advance.
hey did you find a solution?
Did anybody?
Same problem on my HP 14
same
Try to unplug the hdd
If you use ssd on IDE mode then you will face pc hanging issues like for 10-15 seconds
IDE works fine for Hdd
Hello can i get a help here.
I have Lenovo z50-70 series. Just upgraded my hdd to ssd by cloning to make my ssd act as main and use the hdd as a storage device using caddy.
The problem is i can't make my sdd to be my first system priority when it comes to booting.. but apart from that everything is fine.
Did you change the boot order in BIOS?
@@AOMEITech i can find ssd on storage but somehow ssd cant be found in boot option how to deal with this?
@@gavinfielo4904 Try to connect it as an external or install it on another PC to see if it has a connection issue.
@@AOMEITech re clonned it and its fixed. It seems i did a mistake when trying to clone it
In between it stop shows when i copy heavy files. but mine 1tb SSD nvme
Hi... I got a problem went my pc keep restarting and show my device ran into problem.. then i try press key F11 and the first boot device show HDD and sec also showing HDD ... So im really confused right now that my pc just keep repeating restarting... Please help 😂
Hi can i get help.tried all the options in automatic repair options all didnt work even the command prompt lines
Last sort i did is to clean install windows10,but it doesnt fucking detects the hdd in the formatting windows .but it detects in bios. Is the hdd needs to be replaced already?
What is the main issue that made you clean install the OS?
My SSD show rom mode in bios and it only show in bios not show anything in disk management or in task management. What can i do ?
Is your SSD the Samsung?
@@AOMEITech Yes Evo 870 500 GB
@@fahadbhatti6185 Samsung disk will meet this issue it's quite normal. I suggest you refer to the official troubleshooting page to find the answer.
So I have a problem, I wanna check my SSD Size on BIOS but for some reason, SSD isn't showing up, it only shows HHD0 and HHD1, So I don't know if I have a slot available for ssd or not. I can still use my SSD for things so it clearly isn't defective
I have nitro 5 an515-54
You can also check your SSD size in Disk Management, go and check if you can see your SSD in Disk Management! 😊
What should I do if the c disk is in the SSD?
The same solutions as in this video.
thank you
My ssd is showing up on bios but it wont let me format it, it keeps giving me errors.
It keeps giving me "reboot and input proper boot device"
ua-cam.com/video/6EEcPec03cU/v-deo.html
I bought a cheap ssd it was working 100% after trying to cloning to my main hd i accidentally wiping it and the partition now it only showing sometimes in bios and not in computer management my i deleted the firmware and it's broken please can you advice me what can i do i tried everything even watching videos online
You are suggested to go to a repair shop.
i used the free mini tool partition to clone my windows 11 pro from an old ssd to a new ssd and it boots up succesfully, but NOT showing in bios and there is NO IDE mode in sata options!! i have a dell latitude e6540 laptop,, everything works fine,, just can't get bios to recognize my crucial 2 tb ssd😢😢😢😢
Any luck,
Mine has same Case as you. Can you get your laptop normal again? How?
Hello, i tried installing an NVME M.2 PCIE 4gen ssd of 4 to on my MSI motherboard and it didn't work out, my bios don't even open and my monitor show black screen when powering my pc on. Can you please help me with this ? thank you!
To be responsible, I suggest you go to the repair shop, it will be better to fix your issue. Because I can't know more without really testing your PC.
Yes i see, thank you very much. I'll see if i can go to it, thank you for the reminder, really appreciate it !@@AOMEITech
I don t have storage config in my bios wtf
I bought an m.2 ssd to upgrade my pc when i put it in my sata ssd wasn't showing anymore and it asked me to chose a priority boot with the windows but i couldn't only my hard disk and the new ssd showed up
Same with me. I inserted m2 and old SSD stopped showing up where my windows was. Did you fix it?
Recently built a computer but when I do the windows install from a usb it’s not letting me install on the ssd that is installed. What do I do?
Hello Renzo, what did the prompts tell you?
This is weird i cant turn on my pc properly
in my case my bios detects my ssd it shows up
but it says it has 20 megabytes and in other place of the bios it says it has 0 gb
whenever i let it turn on it shows the black screen that tells u to plug in a disk or usb
and sometimes just sometimes actually turns on as nothing happened and as long as i keep it on it works perfectly but if i dare to turn it off i wont be able to turn it on on the rest of the day
its so weird its like if the pc was purposely not letting me turn the pc on more than once per day pls help t-t
its probably my ssd dying or thats my guess
It could be caused by a virus or a bad sector I guess.
My newly installed m.2 ssd isnt showing up on bios, but I still have my sata ssd that have windows in it, so I tried all the methods and nothing worked... do you think my mobo does not support m.2 sata ssd only nvme? Is that even possible?
If you've tried all the methods but still don't work, it has the possibility that your MOBO doesn't support it, you may consult the manufacturer of the MOBO or PC.
@@AOMEITech Yea my mobo doesn't support it, didn't know it was possible, noob mistake so I ordered a nvme drive this time...
Bro in my case in boot sequence I have only three option two are only say Windoys Boot Manager and 3rd is UEFI:CT500P3SSD8, Partition 1....I have no other option I just cloned hdd to ssd and want to set ssd as boot priority .....but not show my ssd model as yours ....plz help
The 3rd one is your SSD bro.
ı cannot enter the windows I just stuck on the Bios
Check if you chose the right boot option and boot mode.
Same problem .. I was watching video on my laptop and suddenly it restarted and bios khul gaya and now I am not able to see any storage in my bios as i have only SSD in my laptop and ssd is not showing
Hi, so I've recently built a PC but when i went to install my OS, i found that i have only 2.0 MB of memory available. This made no sense since i knew i put in a 2TB SSD in it. I checked in the bios, and SSD itself does appear, however it's not showing the size. I've updated my bios to the latest version, but its the same.
It can't be misplaced, If the SSD wasn't placed properly it shouldn't be detected at all right?
Could it be a compatibility problem?
When i bought it, i checked and it did say it was compatible with PC and Laptops. However, i did buy it on amazon... so i am tempering my expectations.
Did you check it in Disk Management, the SSD may be unallocated so it won't show the disk space.
@@AOMEITech I cannot check disk management because this is a newly built PC and I haven't installed the OS yet.
I have 2 red lights on my ssd (internal for a laptop). I know one red light is normal, but 2 ? does it mean the ssd had a critical failure ?
to add some details :
the sata config "IDE" is not available in my bios
I did boot from a small usb key, used the repair option and tried various prompts in the cmd. nothing works and I still cannot see the ssd.
also when this usb key is not plugges in, my "boot priority" is completely empty, 0 option available 💀
Did you check if there are bad sectors?
@@AOMEITech Hi, thanks for the suggestion.
I cannot check that sadly, I just put the SSD on another PC (desktop) in a M.2 slot. 1st strange thing is that IDE isn't an available option in this PC's bios either so idk if that plays a role.
Also I've downloaded a Partition Program, the SSD is not visible anywhere, I cannot ChkDsk on it and cannot seem to repair/recover/clone it with the program.
Do you have other troubleshooting ideas for this ?
@@stoicbaguetteSounds like this SSD has bad sectors on it, I suggest you take it out to a repair shop to check and see if it can be fixed, or it's hard to find out the issue by yourself.
Sales pitch alert
Albina Avenue
Completwly useless
Please help me, my cloned ssd won't show in the boot options, only my hdd shows. But when I go to Boot Override, there shows my Hdd and Ssd. I just need to make my cloned ssd my default boot priority :3
Did you try the methods in the video first? Have you solved the problem now?
@@AOMEITech I have solved the problem now, my bios has a BBS "feature" and there hides my SSD option for boot priority. Thank you for the reply :D
@@jobeergamingtv8962 bro how can i solve this problem i am frustrated now i have hp pavillion gaming laptop and facing same issue please help!
@@jobeergamingtv8962 what did you do for the bbs feature?
@@christo5197 i did nothing, it's just hidden in plain sight on the menu. I think it vary depending on the motherboard that you are using :D
as
as
as
as
as
as
sd
as
sd
gf
fsd
fd
sf
sa
www
www
www
www
www
www
www
www
www
www
www
www
www
fs
www
www
www
www
yuj
www
www
ww