Silver Spray Painting tips
Вставка
- Опубліковано 5 вер 2024
- www.motivatedpainters.com
INSTAGRAM: / motivatedpainters
MOTIVATED PAINTERS AS IS WOULDN'T BE POSSIBLE WITHOUT www.buddscolli... which is where I have worked for a decade now!
UA-cam CHANNEL: www.youtube.co...
SNAPCHT: gabriel.merino / gabriel.merino
LINKEDIN: / gabriel-merino-70488384
TWITTER: ga... spray paint
Hundreds of jobs later, it's awesome that you still love what you do.
You've taught me a lot the past year, so thank you!
Thanks so much!!!
"The Sweet Spot"... You are the only person only to explain that. Best Car painting video on UA-cam. You bloody ripper, mate. - El Canguro tonto (- Desde Perth Occidente Australia)
Hahahahahahahhahaha
Gabe, you are truly inspirational in what you do, if I've had a bad spray job (I don't mind saying I get more than my share of them) I just watch one of your vids then I'm motivated to go back and do it again, I love what you do, thank you. John UK.
When you ran your fingers through your hair 😂 Great tips! Some metallics can be difficult, but you make them look so easy. Have a good one ✌️
Hahahahahah
Good to see you back in action brother. Great video like always
Much love !
Awesome 👏 video Gabe you always giving good advice to us you is the best painter with so much tips keep it up much love ❤️ and respect ✊ all the best in the next one ☝️👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍💪💪💪💪💪💪💪💪👌👌👌👌👌💣💣💣👊👊👊👊👊👊☝️☝️🙏🙏🙏✊✊✊✊✊✊✊🔥🔥🔥👏👏👏👏✨✨✨✨✨✨✨✨✨😉😉😉😉😉😉🧨🧨🧨🧨✅✅✅✅✅✅
Thank you!!!!
That 1.1 tip gun lays down like glass!👍 TAKE MY 💰!
I love it man! motivatedpainters.com/products/copy-of-light-base-walcom-mp-package-1-2
Take $50 off with code TOMCARRANZA untill tomorrow midnight!
Happy paint day
Espectacular, felicidades 🎊
Gracias !
Need regular videos
Great channel.
What the fuck???, why did it take so long to found a youtuber like you? Love your content !
Awesome video as always! ❤️❤️
Thank you!
✌🏻 and thank you always enjoy
Thank you!
Cuidate maquinaaa eres un crak
🙂
Nice job bro
Thank you!
Always a fan
man, im from Brazil, and i really wish i could spend a month with you to improve my painting skills
Much love you can! Keep watching! I don't hold anything back!
buying one of your walcoms next month wait for me please hhaaha
Awesome!!!
You use a sata dryer is that it .or do u have more dryers
When applying the wet bed - why do you apply it on the base and why do you wait for it to flash off.. Isnt that the whole point of the wet bed, to apply base on the spot when everything else is wet in order to get smooth transition? Thank you in advance.
With ppg they recommend it flashes off
Got it. Thank you.
Hey Gabriel, got a question do you get the necessary thickness on your clear coat with that gun, cause I like it and I’m thinking on buying one, thank you!
I hammerbit on so no doubt!! Haha
@@MOTIVATEDPAINTERS ok thanks man
what finish woul be without wet bed ?
you not using 4600 sagolas anymore! any reason for this as i know you rated them ,as thinking of buying cheers!
They work great a bit heavy but great I have been loving the walcoms
👍👍👍
do you have or could you do a vidio on your air fed mask
Yes UA-cam search vision 5000 motivated painters
Is there a reason why you aren't using thet anti static gun anymore?
I do use it specially for new parts!
Amazing work! Gun set up for base??
1.3 base 25 psi and 19 for control coat fan wide open fluid wide open
Hey Gabe, this is Ralph, just wondering if you ever used the Duplicolor Primer Surfacer? Would you recommend it?
Never used it brother so I would TK ow
Know*
GABRIEL, I HAVE NO SAND PILING, PAINT DRY EVERY TIME FOR 30 MIN, WE TACK, WE SHOOT CLEAR AND WEEKS LATER IF WE LAY TAPE DOWN TO PROTECT WHEN ADDING TRIM, CLEAR COMES OFF, OR IF WE HAPPEN TO HAVE A CLIP RUB AN EDGE OF A HOLE, CLEAR STARTS TO LIFT, ANY HELP BRO?
Ask your paint representative if the clear coat is compatible with your base coat
🔥🔥🔥
I used ppg solvent 4_1 mix will that be able to brake it up easily
No idea brother I have never used rhat-!
Hey I was just going through your playlist on silver metallics. I remember you commenting in one of your videos on the Matco gun being one of the best guns for metallics but I couldn’t find any other videos of you using it other then the original one you put up. Where would you rank it among your best base coat guns for silver or light metallics? I want to get one just looking for a little guidance. Thank you in advance.
Hey! That gun is good! However I found a cheaper one that is even better and it Italian made motivatedpainters.com/products/slim-kombat-hte-mp-special-edition-nero I should have more next week!
@@MOTIVATEDPAINTERS I have already purchased that gun from you. It is a great gun. I bought the hte 1.3 and I bought a extra 1.8 set up for primer. I work in a semi truck shop so we use a good amount of single stage and It might be the best single stage gun I have ever used. And as a primer it is amazing for if you have to prime in the middle of the shop because it gets the primer on the panel with virtually no overspray. It does a really good job with clear coats too. The only thing I haven’t tried it with is with metallic base coats.
You will love it !
@@MOTIVATEDPAINTERS have you sprayed any silver metallic jobs with the slim Kombat? Also in a comment on the Matco gun you said you preferred it over the tekna base coat gun. Do you still feel that way?
I prefer the slim now because it's lighter and it sprays just as good
extra joob
🥴
Did you say 2:1 492 and 494 ? For blend panels right ?
494
Отлично👍
Question the blender do you used how do you mixed
75/25 more clear wetbed
@6:00 are you adding 492 and 494? Or is that the clear base (the one that’s in the tri-coats)?
Yes sir! The one that is on the tricoats
Gabriel Merino do you do that on just silvers? Or any metallics bro?
Mostly only silver's
What kind of mask are you using?
Sata vision 5000
굿
Do you tack before clearing?
Nope
@@MOTIVATEDPAINTERS 👍Thanks
Gabriel Merino why not? I remember in ur old videos u would tack it
Nope almost never tack before clear because it can mess up the mettalics
I tack after my second coat of clear.
👌👌👌🙏🙏🙏
Which cup do you use? Hte base or hvlp?
Htr
Hte
Bro did you send to Serbia too?😎
Yes!
Do you really love me?
Maybe I do
You tumble it ?
That sounds ridiculous. Your reinventing the wheel and i would not tell anyone to tumble not stir paint
I don't know what I am talking about don't listen to me. Keep on smiling my franky
@@MOTIVATEDPAINTERS you know 😁
@@MOTIVATEDPAINTERS i almost tumbled today !!. But i just had to stir and shake
Lolololololol old school😏