Discount Codes . . Optics Planet: Use code "715Tac" for 5% off your entire OpticsPlanet order bit.ly/2QUy6Hw . . Black Dot Ammunition: blackdotammunition-com.3dcartstores.com/ (Use discount code "715tactical" at checkout)
That’s one of the sexiest frames I’ve ever seen! It looks like it’s a camo frame you wrapped in tire rubber 🤣. I love the lines and texture appearance!
Hey man. Great build. Apologies if I missed it but.. you said you went with oem internals but that is not a factory guide rod and spring. Curious as to what you used and how the rack feels. I hate to change anything Glock uses internally but I want a more smoother rack without compromising integrity. Recoil isn’t really an issue for me. Any suggestions?? Also again, curious to what you used in this build and how you like and or settled on it.
those aluminum magazine releases do a lot of damage to OEM glock magazines. the metal interfacing with the soft plastic will wear it down over time and ruin your mag, possibly even making it fall out when you least expect it. Strike industries remedied this by making a 2 part mag release that has an aluminum button for your finger but the inside bar is polymer so it doesnt do any damage.
2:20 vickers extended raised slide stop won’t do you wrong, seems like you need it since you’re support hand is riding high! That’s why your slide didn’t lock to the rear
I really appreciate the information I have been wondering how I could change up my grip angle just a bit everything you had done I believe would be ideal. I will be contacting Yoder custom's tomorrow. Very sweet build 💪🏽💪🏽
This is dumb question but I just wanna be certain. You said in the video that it's a glock gen 5 19 slide, but the title says glock 45. Also I think in the video you point out that you like the hybrid glock 17/19 model 45. I'm assuming the 19 slides basically the same as the 45 slide? Cause I went o the website and there's no glock 45 slides.
Yes. The Glock 45 is a 19 slide on a 17 frame. If you’re wanting a pre cut slide you would need a Gen 5 19 slide. If you’re wanting a magwell or agency pre stipples frame then you’ll need a Gen 5 17 frame. Hope that makes sense.
The PSA Dagger Slide is a great one for my price range & my G19X frame. Fits gen 3-5's 19's, 23's & other Glocks. Just swap out backplates. I got the fully complete FDE SW4 GatorMouth (Cobra Cut), RMR milled, 4.5" threaded barrel w/ cap, 1/3 Co-witness suppressor sights for $179. That's much cheaper than I could send my G19X Slide off to just have milled much less the barrel, etc. for a complete slide. The trigger is even better & I had a full trigger polish & upgraded springs that I swapped from the G19X slide to the Dagger internals. Fits nice and snug (zero slop) on my G19X frame with the Holosun HE 407c x2 green 2moa dot. 🤟 I Ran her hard today & no issues shooting 115, 124 & 147g steel case & brass ammo. I love that HE or Elite Version of the Holosun. Not sure of the differences between the HS and HE 👍
If this is the blown deadline I know of you might want to think twice. I live near them and the name is apt. I brought in a gun to get ceracoted and they told me 3 weeks. 9 weeks later I had to go pick it up in pieces and bring it somewhere else. Many others have had the same experience.
@@realdeal1512 the place I took mine eventually was actually right down the street from the 1st place. I don't remember the name though. There's probly a lot of good places on Instagram. I guess it depends on where you are
Yoder customs charge way too much it’s 400+ dollars for a stipple job and sum undercuts imo there’s better cleaner stipple jobs out there for less money like laser stipple jobs . Anything over 150 usd to burn texture into the frame is nuts man
Agancy arms is good but not great but you pay really steep prices for something thats only just great .cracked slides really shitty triggers especially how they cut the trigger bar its ridiculous my friend sent his gun in and when he got it back it came with a cracked slide .they dont have a return policy so they dont stand by there prouduct .
Discount Codes
.
.
Optics Planet:
Use code "715Tac" for 5% off your entire OpticsPlanet order bit.ly/2QUy6Hw
.
.
Black Dot Ammunition: blackdotammunition-com.3dcartstores.com/ (Use discount code "715tactical" at checkout)
get the glock performance trigger, its perfect
My man! Thank you for the support brotha! Such a clean and well produced video man! That build is sick, it came out so well!
Thank you man 🤙 appreciate you!
I definitely want this frame work done
Killer build, one of the sweetest Glocks I've seen.
That’s one of the sexiest frames I’ve ever seen! It looks like it’s a camo frame you wrapped in tire rubber 🤣. I love the lines and texture appearance!
M&Ps feel perfect right out of the box, and so does Canik
😆 no
That’s amazing that’s a great looking 45, I shot a 45 recently and I like it a lot better then the 19.
It's the same gun except with a (Glock 17) longer lower.
Love that build ! Really nice !
Very nice build, I love the Glock45.
Hey man. Great build. Apologies if I missed it but.. you said you went with oem internals but that is not a factory guide rod and spring. Curious as to what you used and how the rack feels. I hate to change anything Glock uses internally but I want a more smoother rack without compromising integrity. Recoil isn’t really an issue for me. Any suggestions?? Also again, curious to what you used in this build and how you like and or settled on it.
First videos I see, Agency glock, KAC SR15, and Staccato xc. Immediate subscription 🤣 🤣.
Those holsters are amazing 🔥🔥🔥
those aluminum magazine releases do a lot of damage to OEM glock magazines. the metal interfacing with the soft plastic will wear it down over time and ruin your mag, possibly even making it fall out when you least expect it. Strike industries remedied this by making a 2 part mag release that has an aluminum button for your finger but the inside bar is polymer so it doesnt do any damage.
2:20 vickers extended raised slide stop won’t do you wrong, seems like you need it since you’re support hand is riding high! That’s why your slide didn’t lock to the rear
What mag release are you running? Looks great..!!!
Very nice build!!!
This quality is insane. Well done. Oh and the build is sick too haha should probably mention that😅
Thank you man!
All my guns need lights. Iam with you on that...
Damn, that is slick!
What about a G21, G30S and/or G41 in 45ACP, these are my favorites?
Have you put your cheetoh fingers on zevved out glocks or the OZ9 yet?
What do you think about the pistol conversion? Something like roni, flux, apex... That would be interesting :)
I really appreciate the information I have been wondering how I could change up my grip angle just a bit everything you had done I believe would be ideal. I will be contacting Yoder custom's tomorrow. Very sweet build 💪🏽💪🏽
Damn, that is beautiful!
I’m trying to get the stipple like yours but idk which options you chose from the long list he has on his site on Yoder customs.
Nice build - I dropped a like 👍
Whew did you buy the G45 frame/lower?
Met man could you go into detail as to what exact options you chose on that Yoder customs frame so I can get one exactly like that lol
Sick build
🙌🙌
Id love to buy this exact build. Im new to this and wouldnt know how to order this build.
What is the point of the razorback? I have never heard of it.
What colors did you use for the cerakote? That multi cam pattern is sick!
What connector are you using on this build?
man that just badass love it
Badass brother!
Nice setup 👌
Really sick pistol
Thanks man
does your rmr look like bunch of mini dots to make a circle? mine does and im not sure if its normally or not
not normal
Is this is a Gen 5 Glock? Which slide package is that from Agency?
All G45s are gen 5
New to channel. Keep up the great work fam.
Happy to have you man 🙏
Would you share the frame configuration so I can order one? Thank you!
Nice!
This is dumb question but I just wanna be certain. You said in the video that it's a glock gen 5 19 slide, but the title says glock 45. Also I think in the video you point out that you like the hybrid glock 17/19 model 45. I'm assuming the 19 slides basically the same as the 45 slide? Cause I went o the website and there's no glock 45 slides.
Yes. The Glock 45 is a 19 slide on a 17 frame. If you’re wanting a pre cut slide you would need a Gen 5 19 slide. If you’re wanting a magwell or agency pre stipples frame then you’ll need a Gen 5 17 frame. Hope that makes sense.
Thats why i always run p80 frames i have few regular and few strike80 frames! the hump is only downside to glocks
Hell yes🤙🏻💪🏻🇺🇲
Nice build!
So the 19 gen 5 slide will work on the 45 gen 5?
Wondering the same thing
My God bro she is absolutely beautiful! 🙄😍😍😍
Thank you brotha 🙏
The PSA Dagger Slide is a great one for my price range & my G19X frame. Fits gen 3-5's 19's, 23's & other Glocks. Just swap out backplates.
I got the fully complete FDE SW4 GatorMouth (Cobra Cut), RMR milled, 4.5" threaded barrel w/ cap, 1/3 Co-witness suppressor sights for $179.
That's much cheaper than I could send my G19X Slide off to just have milled much less the barrel, etc. for a complete slide. The trigger is even better & I had a full trigger polish & upgraded springs that I swapped from the G19X slide to the Dagger internals.
Fits nice and snug (zero slop) on my G19X frame with the Holosun HE 407c x2 green 2moa dot. 🤟
I Ran her hard today & no issues shooting 115, 124 & 147g steel case & brass ammo. I love that HE or Elite Version of the Holosun. Not sure of the differences between the HS and HE 👍
I usely don't like custom guns but it looks good
Nice.
Hellcat pro are g45 mos?
Is the grip angle different?
This one has a reduced profile on the back strap
GREAT VIDEO
If this is the blown deadline I know of you might want to think twice. I live near them and the name is apt. I brought in a gun to get ceracoted and they told me 3 weeks. 9 weeks later I had to go pick it up in pieces and bring it somewhere else. Many others have had the same experience.
Where did you go
@@realdeal1512 blown deadline. Wierd name for a business
Who do you recommend to do this line of work
@@realdeal1512 the place I took mine eventually was actually right down the street from the 1st place. I don't remember the name though. There's probly a lot of good places on Instagram. I guess it depends on where you are
Stock glock frames definitely feel like a brick big time! Garbage feeling. That's why you just go with a M&P
We Need a video on your belt set up
I really like this pistol, let me check how much it would co- never mind.
Let me buy it ahahahah
I need those grips
Why do people put does long flashlights on their handguns
Yoder customs charge way too much it’s 400+ dollars for a stipple job and sum undercuts imo there’s better cleaner stipple jobs out there for less money like laser stipple jobs . Anything over 150 usd to burn texture into the frame is nuts man
Surprised you didn’t change the slide release to tyrant design
I'm curious to see what you can do with a g26 lol I tac'd the fuck outta mine. In better words a g26 with a g19 handle lol red dot and light too
just get the zev fulcrum ultimate kit best glock trigger
Agancy arms is good but not great but you pay really steep prices for something thats only just great .cracked slides really shitty triggers especially how they cut the trigger bar its ridiculous my friend sent his gun in and when he got it back it came with a cracked slide .they dont have a return policy so they dont stand by there prouduct .
They’re actually not that customizable, they’re just heavily supported by the aftermarket due to their tenure in reliability.
You must do a lot of night shooting LMAO
Why spend that much money on a Glock but not on a staccato p? Like why tf would you do that?
Dream Glock is a H&k 😂 glocks are junk. Doesn’t matter how much you spend.
lol never had that problem gun rusting lol
Nice.