G87 M2 - Can we FIX it? First TRE aero mod from AUTOID [ ID-01 ] Rear Spoiler
Вставка
- Опубліковано 1 чер 2024
- We finally get one of the many aero mods we have planned got the BMW M2 G87. In this video we install a rear spoiler we got from AutoID. This is created by TRE and distributed by @AUTOIDTV
➡️ Get 5% off by using Code: M2THING
tinyurl.com/devthing-tre-id-01
00:00 - Package Arrival
00:08 - B-roll sequence
00:24 - Intro in the garage with the TRE ID-01 rear spoiler.
01:25 - Unpacking the box from @AUTOIDTV
02:46 - Install time and Oldspoon arrives to help.
04:44 - Tools used for the install
05:13 - Removing the stock rear spoiler
06:21 - Removing glue, compounding + polish the surface.
07:08 - Installing the rear spoiler from TRE, ID-01
08:31 - Install complete and b-roll sequence.
09:17 - Whats in the box.
10:05 - Passerby curious about my setup.
10:27 - Continue with "Whats in the box"
11:22 - Conclusions and other parts that are incoming
12:28 - Outro
12:39 - Sponsors - Авто та транспорт
![ПОЛНАЯ ИСТОРИЯ ЭКЗОРЦИЗМА [Топ Сикрет]](http://i.ytimg.com/vi/qBySr6Bt0B8/mqdefault.jpg)
That wheel completely suits that Blue M2 .Looks so sick and completely matching the car
Appreciate that 😃🙌🙏
Nice job on the video man. B-roll looks great!
Thank you, I appreciate that 😃🙌🙏
Such a great looking car, now made even better with those wheels and the first of the TRE parts fitted. I’m in the UK and am a big fan of AUTOID and look forward to seeing how yours and their M2 progress. Keep up the good work Prabhul.
Thank you, I appreciate the support. I love what the AUTOID guys are doing and I am so happy to be on this project with them 😃🙌🙏
OH MA GAWDDDD SPOONN!!! I love youuuu!!!!! 😂
🙌😃😂
Let’s go! Such a clean video, we cannot wait to see the rest of the parts on this, keep up the good work ❤
Appreciate the support. Can’t wait to do more with you guys 😃🙌🙏
Amazing video bro, glad to have hooked this up for you 🎉
Thank you. 🙌🙏😃 can’t wait for more 🙌🙌😃
Nice! I love this spoiler design. So much so that I bought it and it's sitting packed ready for when my car arrives, hopefully next month. Thank you for the video. I love seeing it on the Zandvoort Blue M2 - a nice preview for me!!
That’s amazing. Glad you liked it. Did you use the code 😂😃
It also feels like parts will run out for these cars as soon as they enter the market. Be prepared to sang them as soon as it drops 😃🙌
Congrats on the purchase and the car
2:28 dat moment when the new m2 has the same wide rear hips as the porsche. now thats cool
I should do a comparison 😂
Much nicer!
🙏🙌😃
Enjoying the videos Prabhul! Keep them coming!
Thank you, I appreciate the support 😃🙌🙏
What a fun project!
Thanks for the help man 😃🙏🙌
Wow! That looks sharp!
🙌🙏😃 thank you, appreciate that
The car looks wider from the back without the new spoiler. I think it's because the added height to the trunk lid just takes away from the wide look of the car. Personally, I'd go without any rear wing at all.
That’s a good point. I will rock the rear spoiler for a bit and remove it to see how it goes. I want to get all the other aero bits on first
I think it looks dope.
🙌😃🙏
Looks great as is a good width, some stop quite short of the boot but this spoiler is great 👍 and fab video 😊
Thank you, I appreciate that
Gorgeous car 🩵
🙌😃🙏
Great choice. Love the ideas
🙌🙏😃 appreciate that
What wheel did you use for adhesive removal is that the whizzy wheel? I have a basic black and decker drill will that work or should I use a higher power drill?
In the video I borrowed a friends wheels. But then I got this
a.co/d/1ckvlb1
A regular drill is sufficient. You don’t want anything high power as you won’t be using it in high power mode anyways. You don’t want too much heat that it starts to burn through the clear coat. We were being gentle and taking out time with it. 😃
@@thedevthing awesome thanks man. I was deciding between the ID-01 and the smaller CS one, but I’m going for the ID-01.
Looks nice. So which specific one is it (as on the website there are 3 different versions)? Thanks
🙌😃🙏
The on my car is this one ID-01
autoid.co/products/bmw-m2-2-series-m240i-pre-preg-carbon-fibre-id-01-rear-spoiler-by-tre-2021-g42-g87
Needs to be lowered a little more in the front but this thing looks incredible 🔥
💯💯💯, New springs have been ordered. Just waiting on them now 😃
👍🏻
🙌
Good choices 👍👍👍 AutoID is from US…How do they ship to Canada? Brokerage fees and Customs duties very expensive.😂?
They are from the UK and the parts I got so far have not been so heavy so the shipping was not so bad at all. Customs and taxes can add up, but it was manageable this time 😅😃🙌
How is a ride quality with that wheels? Looks nice
It’s great. I just need to get an alignment done to dial it in. Otherwise it’s great.
F80 is sooooooo much prettier!
💯💯
how come you didnt get the Alpha N bootlid? looks way better and full carbon
They are not readily available. It will likely be a winter project. 😃