Pro Circuit Ti6 Pro Install and Sound

Поділитися
Вставка
  • Опубліковано 6 лют 2025
  • Check out the before and after of a 2017 KX450F with a Pro Circuit Ti6 Pro exhaust system. I needed to get some use out of the Canon 6D mk II, so I added a little install edit for you!

КОМЕНТАРІ • 45

  • @wikitube4874
    @wikitube4874 4 роки тому +3

    Nice bro. A great motor cross 🤩

  • @miladyperalta7955
    @miladyperalta7955 Рік тому

    My exhaust gets red in the front is that normal ?

  • @boodavis4064
    @boodavis4064 4 роки тому +3

    I know it’s been a while since you posted this video but do you have to mess with fuel injection at all after installing

    • @andrewowen9513
      @andrewowen9513  4 роки тому

      Boo Davis no I didn’t. I run the white coupler everywhere and they work great together. If you wanted to, there probably could be tuning to do to optimize the use of the pipe, but not required!

    • @joshmotox2946
      @joshmotox2946 4 роки тому

      I know it’s been a while since this comment was made.... any issues fuel wise down the road now?

    • @andrewowen9513
      @andrewowen9513  4 роки тому

      I no longer have this 450. I moved up to a 2020 early in the year. But as long as I had the 450, I had no issues at all with it!

  • @Team_Banchamek
    @Team_Banchamek 2 роки тому

    Did you use the black putty stuff you got with it?

  • @HowardSail
    @HowardSail 3 роки тому +1

    Hey ! Do you think there is a sound difference between the Ti-6 and the Ti-6 Pro ? Thanks ! 🤘

    • @andrewowen9513
      @andrewowen9513  3 роки тому +2

      I think the Ti-6 is louder than the pro and maybe a little deeper sounding. However, I had one on a 450 and one on a 250 so I can’t compare directly!

    • @HowardSail
      @HowardSail 3 роки тому

      @@andrewowen9513 Yes i though me too ! Because the ti-6 pro is designed for competition that sets sound standards i think. Thanks !

  • @tristanmuller1515
    @tristanmuller1515 10 місяців тому

    Nice job cleaning finger prints off before starting. 😅

  • @walkerandrews8892
    @walkerandrews8892 4 роки тому +3

    what camera would you recommend that shoots like your 6d?

    • @andrewowen9513
      @andrewowen9513  4 роки тому +1

      I recently switched to a Sony A7III and love it for video. My biggest take away is something with interchangeable lenses. Get a good quality lens, all the camera does is record what the lens sees. 2nd, make sure it has a mic input for that good audio!

  • @eliopereira5072
    @eliopereira5072 5 років тому

    Hello!
    I'm in love with the Ti 6 and will buy it for my kxf 450 2018.
    What did you think of this? Is there power improvement at all rpm?
    Is the sound louder than its OEM?

    • @andrewowen9513
      @andrewowen9513  5 років тому +1

      Elio Pereira personally I feel like the bike gained responsiveness and an overall increase. It makes the power more suitable to my riding style. I didn’t notice a huge noice increase, but it has a more aggressive sound in my opinion. I love pro circuit products and have never regretted a purchase from them!

    • @eliopereira5072
      @eliopereira5072 5 років тому

      Hello!
      OK! Thanks so much for your tip! I already got the ti 6!
      hug

  • @bungis1618
    @bungis1618 5 років тому

    Like the graphics, where did you get them?

  • @damy_3123
    @damy_3123 4 роки тому +3

    4:06 why I see smoke

    • @andrewowen9513
      @andrewowen9513  4 роки тому +3

      Anti seize is burning off where the joints meet on the pipe.

    • @2Vjake
      @2Vjake 3 роки тому

      Anti seize burning off the pipe

  • @infernalkraken9022
    @infernalkraken9022 4 роки тому +1

    why was it smoking?

    • @andrewowen9513
      @andrewowen9513  4 роки тому +1

      Gavin Eibert it’s the anti seize in the joints of the pipe burning off.

    • @Upthebroncos310
      @Upthebroncos310 4 роки тому +1

      Ahhhh that’s why mine smoked when I started it up, I wasn’t sure if my plastic was melting because it was getting so close to the new pipe

  • @joshuasmith5472
    @joshuasmith5472 4 роки тому

    Did you have to tune the bike??

    • @andrewowen9513
      @andrewowen9513  4 роки тому +1

      You don’t have to tune it. You’ll have gains just bolting it on, but I’m sure a tune would make it that much better!

    • @joshuasmith5472
      @joshuasmith5472 4 роки тому +1

      @@andrewowen9513 awesome!! Thank you for replying! Looking to get one for my 21 kx250

  • @ebank12
    @ebank12 4 роки тому

    Did the pipe come with the springs?

  • @NICKWOLAK22
    @NICKWOLAK22 3 роки тому

    WHY YOUR BIKE SMOKINGGGG

  • @nastysoda9212
    @nastysoda9212 2 місяці тому

    how the fuck do you change the packing? it's rivetted on?

  • @ghustom7608
    @ghustom7608 4 роки тому

    👍

  • @Upthebroncos310
    @Upthebroncos310 4 роки тому

    What year model is your bike? And is it a 250 or 450? I installed mine yesterday and the header pipe that goes into the engine, the cap that goes on the end to screw to tighten didn’t sit flush with the engine, did that happen to you?

    • @Upthebroncos310
      @Upthebroncos310 4 роки тому

      It looks like it did

    • @andrewowen9513
      @andrewowen9513  4 роки тому

      This was on my 2017 KX450. Mine went on flush. I placed the header and tightened each bolt a little at a time and it seated fine. It looks crooked because I didn’t have enough hands and kept letting go 😁

  • @NickW90
    @NickW90 3 роки тому

    Did your header really get that blue just from idling? I just put a ti6 exhaust on my bike today and the headers didn’t change color at all really

    • @thatguyrides7072
      @thatguyrides7072 3 роки тому

      Try using a torch, if it isnt turning blue you have a different type of pro circuit

    • @NickW90
      @NickW90 3 роки тому

      @@thatguyrides7072 i tried the torch but didn’t like how it turned out. I hand polished it which took most of the color away, then it went blue on it’s own

    • @thatguyrides7072
      @thatguyrides7072 3 роки тому

      @@NickW90 cool

  • @johnharriott190
    @johnharriott190 4 роки тому

    Do you need a programmer to run the full exhaust or just bolt it up and it’s good to go

    • @andrewowen9513
      @andrewowen9513  4 роки тому

      You don’t have to reprogram, it’ll run just fine bolting it up. However, there probably is some more performance to be squeezed out of it if you do! The ECU is not something I’ve dug into yet besides the couples on the Kawasaki.

  • @gumamelagumamela6534
    @gumamelagumamela6534 3 роки тому

    135 kawi bro....