Scooterhacking for noobies - St-link downgrade for a good reason
Вставка
- Опубліковано 4 чер 2024
- make sure to discharge the capacitors before ST-linking: see community tab or my discord channel
48V Mod: • Ninebot 48V Mod For No...
how to ST Link the new Controller v1.1:
• Scooterhacking 2024 St...
download files:
www.mediafire.com/file/a9ee2s...
SHU App:
utility.cfw.sh/
___________________________________________________
Thank you for likes
Special thanks to all subscribeers :)
Ninebot G30D II:
amzn.to/3T8ddXA
ST-Link V2:
amzn.to/3Lz9lNV
XT90:
amzn.to/44keAX6
shrink wire:
amzn.to/45Ec4Mq
Electronic kit:
amzn.to/3Li98hY
PA2.0 connector:
a.aliexpress.com/_mqXAbC2
PH2.0 connector:
amzn.to/3FhfsSM
JST 2.0 connector:
amzn.to/3J549OK
USB Extension:
amzn.to/3LejXS3
Soldering Iron set:
amzn.to/3Tdi9uC
Quicko Soldering iron (without Power Supply):
amzn.to/3JyG5Fl
Solder i use:
amzn.to/3l50iJu
Ventilation for soldering:
amzn.to/3YIDVHs
Shrinkwire 3mm:
amzn.to/3yxMEC0
valve extension set:
amzn.to/3J9ev00
alternative valve extension:
amzn.to/3T6Txn7
Pump:
amzn.to/3Fj5BMt
Handlebar for Kids:
amzn.to/3Jz2cf2
Ninebot G30 Replacement parts:
amzn.to/3T7V5NE
___________________________________________________
utility.cfw.sh/
rollerplausch.com/
ST-Link tutorial:
rollerplausch.com/threads/st-...
AT32 9bot-Flasher:
rollerplausch.com/threads/9bo...
SHFW tutorial:
rollerplausch.com/threads/shf...
Scooterhacking Reflasher:
www.scooterhacking.org/forum/...
_________________________________________________________
Timestamps:
00:00 he tries out the st-linked scooter for first time
00:20 Coming up
01:10 introduction
03:39 pump up the tires
7:50 disassembly
15:20 downloading the software
27:53 preparing the st-link wires
37:56 St- link different pinouts
39:42 install St-link drivers + update st link
45:14 connecting wires to the controller (reflasher)
49:29 soldering the wires + St-link attemp
51:07 now it is working
52:56 quick connect + testing the flashed controller
56:15 SHU Attemp DRV downgrade
57:35 installing the shfw (load custom)
59:04 downgrade BLE to 1.1.4
1:00:15 lets build it together again
1:02:14 start the SHFW configuration
1:02:44 changing Region to EU
1:03:37 config
1:10:00 disable charging mode + hall sensor settings
1:19:48 rename profile + set profile 2 + set brake values
subscribe :D - Ігри
Thanks, great tutorial with perfect step by step procedure.I have made my first downgrade from DRV 1.8.7 to 1.6 3 with stlink. Cheers!!
Your video helped me. Yesterday i did it! Witout turning off\on 5v (same controller). But I soldered the switch just in case😉
Nice 👍
You videos' quality is better that other UA-camr with millions of subscribers.
Great work and thanks a lot. I really appreciate it.
is this a ironic comment? If not, thank you my youtube friend :D
@@mckuc5096 no it's not. lol 😂
Woah awesome content!
Great job 👍 Thanks 🙏
Happy to hear that :)
I would be ordering new deck frame and itcmy very first project and I don't have to worry about having any firmwares with apps and Ive still got ninebot max and rather kept in stock until my new deck frame and looking forward on my first project so can not wait then I can go offroading every weekends and stock for public areas without getting a not trouble just sticking with good thoughts not to spend money on toward the government 😭
Hey, I just spent 2 hours trying to flash my g30lp and realized I need a STLink because the new DRV version. Is that the only way? I don't really wanna buy a stlink and take the thing apart but if that's the only way then idk...
It depends on the controller and fw you have installed.
If its controller version 1 (ST32 chip) and Version 1.1(AT32 Chip) then the Firmware needs to be 1.7.3 or lower to be able to install shfw per bluetooth. If DRV is above 1.7.3 then only st-link can help.
If you have a Controller v1.1 and it shipped with 1.7.3 from factory then you may need SHU 2.1.1 instead of SHU 2.2 to be able to install SHFW. Link is in the description.
What DRV is your scoter on?
Check with SHU (ScooterHacking Utiluty App)
Hey I can use any STLINK from amazon right?, the one I bought doesn't require sodering where I could just plug it into the pins if that's ok. I have the STM Chip
Should work with every st-link v2
how do i know which color pins do i plug into which? mines are purple, blue, yellow, and green.@@mckuc5096
Hello and thanks for the content. I have a question, I did downgrade to 1.2.6 but now when I put the scooter to charge, it doesn't show the battery level like it used to do before. I have to check it through the app to see the charging percentage. Any idea how to get the function back?
Probably because charging mode is disabled. Try to enable it. You can also install SHFW 0.3 regular base 187. It was released today. There is a field weakening option to boost the scooter :D
t.me/scooterhackingchat
@@mckuc5096 how to enable the charging mode please? I can't find the option anywhere in the app
@@marouaneerrais318900:43
Do you not need to check the AT32 for a g30 with the single capacitor board?
what do you mean?
I have the G30 controller and I have good contact with the click and Dio and it just won’t connect to target?
🤷♂️
Good job,
I have a F25i Scooter that is stuck at 22KM/H when I changed the region to Germany. Could you please help me to change it to the default or downgrad the firmware? This is the current DRV 3.0.10
You can get help here: t.me/scooterhackingchat
I dont have the scooter
@@mckuc5096 Thank you!
Hi! I am loking forward to do it on my scooter, but I don't know where to find info if is compatible with the refresher. My info is: Mi Scooter Electric Essential / BLE 1.3.7 / DRV STM32F|2.4.5 / BMS 1.4.1. That's the info I found in ScooterHacking Utility. Can you tell me if this method of flashing the controller and the bluetooth board works?
Also, I am from Brazil, here we don't have any blogs about scooters because it's a rare item here. Mine came limited to 20kmh, I bought recently in 2022. I know that those newer versions if you try to flash it via bluetooth may brick them.
@@hericklet t.me/scooterhackingchat
Cześć, Oddałem moją hulajnogę na seriws aby odblokowało st linkiem i wgrali nowy soft shfw. Zauważyłem że mam inny numer seryjny w aplikacji niż na obudowie i dokumentach zakupowych. Nie wiem dlaczego wpisali inny numer ale czy mogę go spowrotem zmienić na oryginalny numer seryjny tak aby nie tracić zapisanych ustawień i shfw działał tak jak działa dotychczas? Czy zmiana numeru seryjnego jest nieunikniona i musi być inna niż oryginał?
In english please
@@mckuc5096 damn, I really thought that UA-cam was so advanced that it automatically translated my language into yours. I didn't know about it but don't worry, everything is fine
I followed the steps on your video. It worked perfectly. I just cannot get speed over 29km/h. My scooter is a g30 ii with gen 1 motor. Is it possible to reach maybe 35km/hour?
In The future in shfw you get field weakening setting so you get gen1 stock running like 35-36 kmh but you lose like 15-20% torque so yeah but definitely gonna use it
Is it possible to send you my Ninebot G30D for Downgrade?
ua-cam.com/video/rfXen8yiTOo/v-deo.html
Moin brauche hilfe kann ich die kabel auch gegen drucken beim kontakt
I have a Ninebot P65 and I’m stuck at German region (22km) will this work if I do it on my Ninebot P65?
Currently no. Best option is to join the scooterhacking telegram channel to stay up to date when some exploit comes out for the new ninebots P65/ G2 ...
t.me/scooterhackingchat
t.me/scooterhackingupdates/75
And for the ninebot e2?
Same problem stuck at german version and also when i want to drive it just wont work i put the wrong firmware on it i guess
@@dylangww6293 for me because i cant change it with st link because its not possible with my scooter, i ll buy a new controller and install it. mine it will cost around 100 euros, maybe you can just do the same like me or do it with st link maybe its possible with your scooter type.
@@dylangww6293 you answered your question. How did you put another fw on it, if it can not be flashed 😄
Does reflasher has to detect a st link to download it ?
What do you want to download?
Reflesher has to connect to the ST-Link and it has to connect to the STM32(controller) too, to be able to flash it. You can see the log in the video.
Does this work with the normal ninebot max g30?
Yes it does. Depending on the controller you have, you will need a different program.
9bot-flasher is needed for the new v1.1 controllers
i can do this procedure with a ninebot max g30 e 2 too?
Yes, Controller V1.1 needs the 9-bot flasher program
Hi, i followed your steps, but now my throttle is breaking and going backwads, how do i fix this?
First Check the wiring and maybe you need to enable new max motors. Not sure if this is still a thing but if the wiring is okay (no inverted connectors) you can flash another regular base SHFW
Hello, does it work for g30p with v1.8.7? Bcs looks v1.8.7 imposible to hack with bluetooth scooterhacking programm..
Here is the right video for you:
ua-cam.com/video/rfXen8yiTOo/v-deo.html
You probably already have the newer Controller v1.1
Do you have the gen 2 or gen 4 Motor? ua-cam.com/video/evI7lNbwelM/v-deo.html
@@mckuc5096 looks like gen 2 starts with 9J..
@@SergeLV for me the gen2 is better then gen 4.
Here is the right video for you:
ua-cam.com/video/rfXen8yiTOo/v-deo.html
von wo seid ihr aus OÖ ? brauch hilfe :) bin aus Linz nähe
Wobei denn?
Wie wäre es wenn wir auf Discord weiterschreiben.. discord.gg/z7PK32Tzmm
Moin reicht das auch wenn ich da mit denn Kabeln gegen drück
can i use macbook with this program?
Probably not
can i downgrade drv to 1.2.6 with st link?
if i can,can you send me a link to download it?
It depends on the controller you have. Download the scooterhacking utility app
Will this work for the g30p?
Yes. You maybe have another controller with AT32 Chip. It can also be flashed with ST-link and Ninebot flasher. If the DRV Firmware is low enough, you can also flash it via bluetooth and Scooterhcking Utility directly. ua-cam.com/video/nubJQbKGblI/v-deo.html
Thank you so much!
@@David-py9wr install the SHFW and check the info. What DRV does it have?
@@mckuc5096 i believe it is 1.8.3
@@David-py9wr 1.8.3 = ST-Link
Hallo, wäre es möglich, dass ich zu Ihnen komme und das Downgrade durchführe? Lassen
Hallo. Ja klar. Schreib mir auf discord: discord.gg/z7PK32Tzmm
bro fastupload has virus ads on their sit eif you dont have adblocker enabled
If you are worried don't download it. rollerplausch.com/threads/shfw-anleitung-2023-scooterhacking-utility.3753/post-99743
😍😄😄😄😄😄😄😄😄😄😍😍🤩🤩
3km start motor better save
2-3 is good 👍
I have 1.8.11😢😢 what can I do
St-Link
Do you have a discord where i could contqct you please
discord.gg/z7PK32Tzmm