I am sure everyone will like it very much, if you design and install the system, it can be placed on the back of the backpack and has a large-sized solar panel that can output power up to 5A. You should definitely do this.
Good video but it wouldn’t be a bad idea to add a diode on the positive leg from the solar panel to block any current flowing back into the solar panel.
No need to do that in his case, since there's a switch so if it's open, no current can flow to solar panel when charging via mUsb.. And even if the switch would be close, i think the no current would flow into that panel because the electricity always goes the path with lowest resistance.. Some testing this theory would be nice though.. (multimeter could check any current flow into panel while charging from a wall)
Eyes tried so much but I didn't got the concept but I make a smaller one it is good I have the Solar Panel also it's it is working thanks bro please pin my comment
The return power from battery or the power from the charger during charging the batteries, can damage the solar panel. U should attached a diode to the solar panel for safety.
@RANI BURNWAL, Not certain about the points made but ,if anyone else wants to learn about home solar energy for dummies try Magonsi Solar System Expert (just google it ) ? Ive heard some pretty good things about it and my brother in law got great results with it.
With so many power-banks with fake capacities floating around online, it does seem an interesting idea to make our own like this. At least you know the real capacity by how many batteries you put into it. :)
I like your vid and want to build one too, a few questions, is the added switch button really needed? Doesn't the circuit board have auto over charge protection, so a switch isn't needed to cut off the power to the batteries? And what does that button on the PCB on the opposite side of the LED do? Thank you.
This power bank can be charged via a micro-usb cable or through the solar panels itself. I do not think you can charge through both? This could be the reason of the switch. Again not sure about this part, since charging with both is effectively putting the external source and solar panels in parallel. The button on opposite to the LED powers the LED light. That is why he used the end of a pen ink container to power/power off the switch.
Do you think i can connect 2x6V ones in parallel (4.5W) directly to mUsb? I use rectifier (2A li-po charge board that takes anythin from 5-20V and charges the battery directly) but charging on does not show up on powerbank module because that rectifier is connected to battery :( edit: i think using 6V should be fine since on multimeter it shows around 4.8-4.9V on panels when charging.. I mean the voltage always drops to appropriate Voltage on load yes?
When current flows through the micro USB port from AC to DC charge then will it destroy the solar panel? Please answer I want to make it soon by purchasing things from CHANDI MARKET. I love your videos too much.. Pls reply..🥰🥰
What is the purpose of the switch? Why do we need switch specifically for enabling/disabling the solar panels? Is it to prevent charging the power bank from both an external micro-usb and also our solar panels? If so why can we not charge via both at the same time? Can we charge the panels via solar while charging a cell phone?
Saludos muy buenas tardes muy buen video usted realizó solo que no veo claro de dónde usted colo los cable del panel solar para que cargue las baterías me puede ayudar con ese dato de favor si no le incomoda ayudar me gracias que siga subiendo más ideas geniales un fuerte abrazo
hi, i just wanna say that your video is amazing, and i have a question, you connect the cables directly, to the micro usb port, so you also can use the current DC to charge it ?
bro actually mobiles charge by dc current only ,the adaptor you use for charging is nothing but ac to dc converter ....if you check the label which is attached to your charger it is written there ....all the devices work in dc current only except few devices ..and most of them have inbuilt ac to dc converter. :)
The switch is to turn off the solar panel so you could use the batteries to charge your phone or you can use charge your phone while the solar panel is charging the batteries? What's the purpose of connecting the solar panel to the middle USB port (minute 4:00)
Put a diode in series with solar panel to keep it from running batteries down when it is not charging .. solar cell + on this side of diode ---l>l-- to + on Battery.
I'm sure alot of people would have preferred for you to speak about the this rather than pay money.
Thanks for the info on diy solar powerbank
You can find something like this on the Avasva page. Full step-by-step instructions right on your desk.
Can u plz share the link
@@rokie231 Just google for it Dennis!
I am sure everyone will like it very much, if you design and install the system, it can be placed on the back of the backpack and has a large-sized solar panel that can output power up to 5A. You should definitely do this.
your r my one of the favourite youtuber . go on making these videos:THANK YOU!!!!!!!!!
With plans from Avasva you can make it really easy.
Can plz share that link
@@rokie231 just write avasva anywhere ;)
@@shantahsieh4833 I did, but unable to find it. If u could share that link, it would be great.!!
Wow what a solar power bank you are intelligent guy luv it
1:01 or you could use spot welding
Awesome bro. I'm also searching for 18650 batteries✌️✌️👍👌👌👌
I very like this..
This is very clean
Other vidios are dirty..
How did you make the holes?(Very clean...OMG..)
I want to do more than 1000000likes..
Thankx for making this ... And completing my wish..
Zeta by ty
Amazing. Love The Wrench.😍😍😘😘
Good video but it wouldn’t be a bad idea to add a diode on the positive leg from the solar panel to block any current flowing back into the solar panel.
That's what the switch is for 👍🏼
sir can we charge it with electricity pls tell me and your vdo is so cool
Yes definitely
Amazing love u and ur channel
And salute to ur innovative ideas
thanks bro 😊
What's the solar efficiency of the panels?
How did you give for that soldering how many soldering is in your hands
You are making very brilliant and nice vedios
Brilliant idea bro & Good finishing 👌👌👌. . .
thanks bro 😊
How to make electric screwdriver please please post it on your next video🙏🙏
Nice video
Fabulous bro..
👍👍👍👍
thanks bro 😊
Mr wrench u can use a diode in series to the solar panels since it voltage drop across the diode and it protects the panel
No need to do that in his case, since there's a switch so if it's open, no current can flow to solar panel when charging via mUsb.. And even if the switch would be close, i think the no current would flow into that panel because the electricity always goes the path with lowest resistance.. Some testing this theory would be nice though.. (multimeter could check any current flow into panel while charging from a wall)
@@paveljelinek772 thanks 😊
I ordered a pack of 10 solar panels on amazon. They look big and when i got them they were like a 1 inch size. Very small.
hi. when exposed to sunlight and charging batteries can it simultaneusly charge the phone ?
Nice ideas...........like it bro😀😀😀😀😀😀
thanks bro 😊
The Wrench welcome
i will make my own thank you for your tutorial dude your amazing....
Super bro amazing excellent 👌👌👌💪💪💪
sir akash awesome video👍👍👍👌👌👌😊😊☺
thanks bro :)
wow amazing stuff love this invention 👊👊👊
thanks bro :)
The Wrench 😊
Eyes tried so much but I didn't got the concept but I make a smaller one it is good I have the Solar Panel also it's it is working thanks bro please pin my comment
The return power from battery or the power from the charger during charging the batteries, can damage the solar panel. U should attached a diode to the solar panel for safety.
Nice idea what is the cost of solar panel
about $4.00, look at the link
4 dollars? you overpaid like hell. you can get 5 for that price
@RANI BURNWAL, Not certain about the points made but ,if anyone else wants to learn about home solar energy for dummies try Magonsi Solar System Expert (just google it ) ? Ive heard some pretty good things about it and my brother in law got great results with it.
Superb.... what is the cost of power bank mother board$$$$$$$
Very cool, most cheaper power banks have too little capacity. I just thought screen should be mounted on same side as solar cell though if possible?
With so many power-banks with fake capacities floating around online, it does seem an interesting idea to make our own like this. At least you know the real capacity by how many batteries you put into it. :)
I like your vid and want to build one too, a few questions, is the added switch button really needed? Doesn't the circuit board have auto over charge protection, so a switch isn't needed to cut off the power to the batteries? And what does that button on the PCB on the opposite side of the LED do? Thank you.
This power bank can be charged via a micro-usb cable or through the solar panels itself. I do not think you can charge through both? This could be the reason of the switch. Again not sure about this part, since charging with both is effectively putting the external source and solar panels in parallel. The button on opposite to the LED powers the LED light. That is why he used the end of a pen ink container to power/power off the switch.
How is the module taking so much volt? Pls help me for my project
How do I solder the solar in? It seems like such a small area.
Can it only charge when its in sunlight? or can you charge in sunlight and store the power to use inside the house?
Well it's a solar charged power bank?
where the fcuk. did u connect the anode and cathode of the solar panel... please clarify 🤬
which soldering iron do you have link pls
Nice vid but doesnt your solar panel amps have to be more or the same with the power bank amps?
What? I don’t understand
I am your big fan
Really awesome work, bro! Really nice! 😀
thanks bro 😊
Can we power the power-bank using micro usb or is it only by sunlight
Pls reply caz I have to make this project and submit it to the college
u r amazing bro no one like u
Do you think i can connect 2x6V ones in parallel (4.5W) directly to mUsb? I use rectifier (2A li-po charge board that takes anythin from 5-20V and charges the battery directly) but charging on does not show up on powerbank module because that rectifier is connected to battery :( edit: i think using 6V should be fine since on multimeter it shows around 4.8-4.9V on panels when charging.. I mean the voltage always drops to appropriate Voltage on load yes?
Did you connect the solar panels into the 18650 batteries?
How much weeks It take to charge the battery
Hume apne jo parts use kiya.. woo kaha se mileage?? Wo thora detail me digiye..
Super bro😍👌👍
Can it be a 2 in 1 power bank which can directly charge the battery ,solar power and ac power
Bro jo hardware use karto hi uake name bhi bataya karo na ... Or kha pe melega vo bhi batav 😊 baki best he
Agar hum mobile charger se power bank charge karenge tab solar panel kharab nahi hoga?
Very useful... Thanks🔥🔥🥲
How big is the battery bank pcb connectors or send 3d model link
Nice bro.. you from India..? if you from India which state?
When current flows through the micro USB port from AC to DC charge then will it destroy the solar panel?
Please answer I want to make it soon by purchasing things from CHANDI MARKET.
I love your videos too much..
Pls reply..🥰🥰
রিপ্লাই দিয়ে দাও না
Wow very nice excellent
Got the panel batteries lying around the garage. Just gotta buy the module
Use full Osam ♡ ♥ ♡ ♥ ♡ ♥ ♡ ♥ ♡
Keep it up owsome bro
hello
What is the purpose of the switch? Why do we need switch specifically for enabling/disabling the solar panels? Is it to prevent charging the power bank from both an external micro-usb and also our solar panels? If so why can we not charge via both at the same time? Can we charge the panels via solar while charging a cell phone?
Could you plz tell me how you attached the solar panel to the circuit
Question, why do you have a switch? Don't you want it charging all the time?
can you charge the power bank with a charger too or only with the solar panel?
So it can be charged by electric charger and solar panel, right?
Hi bro, I Already Did That DIY.
Does it work properly please let me know ?
Saludos muy buenas tardes muy buen video usted realizó solo que no veo claro de dónde usted colo los cable del panel solar para que cargue las baterías me puede ayudar con ese dato de favor si no le incomoda ayudar me gracias que siga subiendo más ideas geniales un fuerte abrazo
Super 🤝👆👌
Can we charge the power back with charger also?
Superb yarrrrrr what a mind
thanks bro 😊
Good work looks pretty decent
Best video🚩🚩
How did you connect wires to that mUsb?? Black 1st pin, red 5th pin?? It's not 100% clear from the video.. thanx
Excelente idea muy útil
does the power bank PCB have short circuit protection
How much time power bank take to charge through solar panel? I think , rate is very low. But concept is good.
A panel is of 250mah, if we use two panels, then 500mah will become. if 4 then 1a. This way we can increase its charging capacity.
You are the best
is the display always on, display light is always on or off?
Please tell me the name of this song
Please give link of battery holder
You are great bhai
Bro make a spot welder
Very nice awesome bro
thanks bro 😊
Very good bro
you need a diode for the Solar or it can discharge the batt instead of charging
nice good video bro
hi happy ji
thanks bro 😊
your ideas is new "The Wrench"
thanks bro 😊
1st class👌👍
yes bro
thanks bro 😊
hi, i just wanna say that your video is amazing, and i have a question, you connect the cables directly, to the micro usb port, so you also can use the current DC to charge it ?
bro actually mobiles charge by dc current only ,the adaptor you use for charging is nothing but ac to dc converter ....if you check the label which is attached to your charger it is written there ....all the devices work in dc current only except few devices ..and most of them have inbuilt ac to dc converter. :)
What you have used in it
How did you buy these from bang good
yo bro can this be chargeable using your own charger? please I need your answer
Charge a full day and use 10 minutes.congratulate
Awesome idea
Nice video bro
hello
thanks bro 😊
The switch is to turn off the solar panel so you could use the batteries to charge your phone or you can use charge your phone while the solar panel is charging the batteries? What's the purpose of connecting the solar panel to the middle USB port (minute 4:00)
Put a diode in series with solar panel to keep it from running batteries down when it is not charging .. solar cell + on this side of diode ---l>l-- to + on Battery.
where and how do you solder the wires from the solar in the micro usb??
Hi I made this project. Same connections, but when solar charging is on, the battery level remain at the same number. What's the matter? thank u
Your solar panel is not able to provide much amps for charging
Use usb charger ,solar panel is just for showing
Sir, can you please tell me what kind of wires you used throughout this project?
How do you connect the solar panel to the micro usb in the power module device?