Nice, I just bought a bunch of different power bank boards to make some solar and not solar battery banks. I'm using lithium batteries that I have separated out from my collection that don't have very high capacity and I was planning on just doing a hack job and tape everything together but this looks much better and pretty easy to do since the wood is so soft so I'll be doing this instead eventually. I'm using low capacity cells because I'm saving the good ones for a large battery bank with an inverter.
Would consider this as the best project for rechargeable battery DIY. Great finishing. Sytlish. A joy to have the box. Two solar panels makes more sense. One question: Does it matter about the 200MA solar panel? Some are 100mA, some are 60mA etc. Three cheers. 6V 1.1W 200mA Mini Monocrystalline Solar Panel Photovoltaic Panel
That solar panel can draw max current of 70 mah. it will take like 6 days to charge that power bank. Apart from solar power ur Power bank design is quite cool.
Yo KJDot. So Im studying for a electrotechnician and i want to make this power bank my project. The problem is that I need a drawn out circuit but dont know how to draw. Do you have any sprinted for this power bank?
That's a very nice build. Thanks for that video, just subscribed. Seen some other videos too as well, real nice. Oh yeah, what type of Balsa Wood is that? Thanks again, Tom.
DOT 你的太阳能电池板工作吗？面板在阳光下产生多少电压和电流？ 额外的直流到直流降压转换器是用来连接太阳能电池板到电池模块吗？ 我喜欢你的想法，使用电工胶带和清漆线来创建自己的带状电缆。我将在未来使用这个想法。 Do your solar panels work at all? How much voltage and current do the panels generate in the sun? Was the extra DC to DC buck converter used to connect the solar panels to the battery module? I like your idea for using electrical tape and varnished wire to create your own ribbon cable. I will be using that idea in the future ;-) -Jake
Did you solder the wires when you connect the batteries?
Nice, I just bought a bunch of different power bank boards to make some solar and not solar battery banks. I'm using lithium batteries that I have separated out from my collection that don't have very high capacity and I was planning on just doing a hack job and tape everything together but this looks much better and pretty easy to do since the wood is so soft so I'll be doing this instead eventually. I'm using low capacity cells because I'm saving the good ones for a large battery bank with an inverter.
you have saved my engineering fair project. GOD BLESS
Aapne battery parallel me connect ki h ya series me. Aapne buck converter kyon lagaya hai
自製太陽能充電寶!
簡單又實用!
一般的充電寶要插充電線
這個完全不用
當充電寶的電用盡時
只要把它放在光源下即可充電囉!
像是日光燈.還是檯燈下都可充!
小巧好攜帶!
在外也很方便!
只要白天有太陽的地方就可充電
如果沒太陽可以用日光燈or檯燈都可以充滿!
簡單又實用!
自製太陽能充電寶!
Please how did you connect it to mUsb??? 1st + 2nd pin ground, 5th pin red? It's not clear from the video.. Thanx man
Did he directly connected the input of the power bank to the solar panels?
Will u send the link of battery & circuit plzz
Which switch did you use and what were the wire gauges used?
How did you get the thick wires that’s connected to the battery?
Can you place only one solar cell?
Nice info, thanks for sharing it :)
Great work...!!!!! Nice work
What current Amp you get during charging when use both solar panel?
what glu you use to joint the wood please tell tha name of glu
hyy bro i can't find Lithium battery protection board plzz give me link of this item
Same, what kind of lithium protection board do you recommend for this project?
that's tutorial just one of the best!!! thanks 4 this!
Hey man, what is the 5V buck board used for?
Voltage regulation of solar panels
I Love U And Ur Channel
Thank you
name of the wood u use? and also what is the charging current of the power bank ?
Zia Abbasi hy were you able to know the name of this wood?
basal wood
Where to buy varnished wire?
Would consider this as the best project for rechargeable battery DIY. Great finishing. Sytlish. A joy to have the box. Two solar panels makes more sense. One question: Does it matter about the 200MA solar panel? Some are 100mA, some are 60mA etc. Three cheers.
6V 1.1W 200mA Mini Monocrystalline Solar Panel Photovoltaic Panel
Did u connect pannels serial or parralel?
Very nice sir and love you keep it up
Thank you
Nice bro
How much the sculpture knife will cost?
How to get varnished wire?
you are creative person i like you please show us by video how to make 20000 mAh power bank thank you
Can you tell me the lithium battery protection board you bought. Tell me the specs. You can reply to me in Chinese.
how many ampher did you use when charging?
nice video
That solar panel can draw max current of 70 mah. it will take like 6 days to charge that power bank. Apart from solar power ur Power bank design is quite cool.
how much cost to make recharger powerbank?
Can u please tell why u use 5v buck board and where it connect in ckt also where do you connect 2nd solar panel?
Sorry, my English is not good.
Sorry I do not want to be rude Why do not you write YOU instead of U
could you please upload a wiring diagram? THANKS
Hello can i get this power bank ?
Thank you for this video, And Also If you press the button twice the led will light up.
Yes
And the thickness?
It's very nice solar charger📱📲🔋
Thank you
@@KJDOT well come,,^_^
Hey where did you use touch the switch? Bay the way cool video
@KJDOT
Perfect and neat work
Thank you
Tuyet voi
How long it take to fully charge the battery with that solar panel?
It takes at least 20 hours
that's tutorial just one of the too much more best!!! thanks too, much, more 4 this!
請問太陽能板建議是用大於5V的降壓 還是直接用5V的好呢？
用大于5V的然后降压，因为在不同的时间下 太阳能板的电压会有浮动，直接用5V的，很有可能在有些时候电压到不了5V
Where can i get the same lithium battery protection board that you used?
You can try to buy at banggood.com，Sorry, my English is not good
It's too good
What is your glue name
Very Nice !!
Will you sellit
Instructions unclear. My cat is now rechargeable
What kind of wood you use in your video???
Balsa Wood
很好的發明，沒有量產的機會嗎？有量產的話，真的會想買。
不错的作品，希望下次能做一个小型的可调稳压电源😊
稳压电源过段时间做吧
科技DOT 期待
What is the switch for?
Battery capacity?
What’s the switch for
Awesome ,but needed parts list
Where to buy the knife
Yo KJDot. So Im studying for a electrotechnician and i want to make this power bank my project. The problem is that I need a drawn out circuit but dont know how to draw. Do you have any sprinted for this power bank?
my English is not good, sorry
@@KJDOT download language translater from Google Play Store
What type of wood you use pls reply?
Balsa wood
Does this charge an Iphone or is it just for Android?
Suitable for any system
Where can I find the battery lithium protection board
banggood
KJDOT what model is it ?
pt.aliexpress.com/item/BMS-Li-ion-S-18650-3-7V-Lithium-Battery-Board-PCB-12A-18650-Charging-Module-Overcharge/32827008322.html?spm=a2g03.10010108.1000013.15.12996247Nbtc3S&traffic_analysisId=recommend_2088_8_99728_iswistoregraebd&scm=1007.13339.99728.0&pvid=9155bdc9-bb30-463d-a3c8-92e60ab2a5e0&tpp=1
What were the glues he used to stick the parts? Does anyone know?
502 and AB glue
科技DOT thank you
You're welcome
Youare going really well brother... keep it up👍👍Btw, how old r u😊
Thank you
어떤 나무를 사용하고 계신지 말씀해 주시겠습니까?
Balsa Wood
How much it's cost
Cool idea
Thank you
No sunlight at my home i wish that there was a night light pane
请问，木板和其他的材料是在哪里买的？
我是在淘宝上买的
I want this box?
That's a very nice build. Thanks for that video, just subscribed. Seen some other videos too as well, real nice. Oh yeah, what type of Balsa Wood is that? Thanks again, Tom.
Thank you
What is the ampere value of solar panel??
6V 200ma
How to connect solar panel with this pcb!!!!
Where solar terminal connect in pcb???
Sorry, my English is not good
Its ok i can understand!!!
Just tell me one thing that,,,how to connect solar panel with this pcb
Name of material u use
Material name at the bottom of the video
Wowow excelente video
how you GET that batteries
massage me
请问轻触开关是干什么用的，谢谢！
控制LED照明灯的开关，主板上带有一个小的灯珠
谢谢，你的太阳能板是什么电压的？需要加变压的吗？如果方便的话，加一下微信。
太阳能板是6V的，我加了一个微型的加压板，把电压降低到了5V，然后接到了充电宝主板的microUSB触点，抱歉我不用微信，可以加一下QQ群14796300，我就在群里
Awesome😇😇😇
這樣做起來要多少錢
我在淘宝买的配件，主板9元，降压板2元，锂电池保护板5元，电池20元一节，一共不到一百元人民币，如果电池用10元一节的三星电池，价格会便宜一些
KJDOT 那這樣總共又多少mah
我用的电池是松下3400毫安一节的，四节加起来13600毫安，算上主板功耗的话应该是12500毫安左右
Please send connection photos of wires dot channel
DOT
你的太阳能电池板工作吗？面板在阳光下产生多少电压和电流？
额外的直流到直流降压转换器是用来连接太阳能电池板到电池模块吗？
我喜欢你的想法，使用电工胶带和清漆线来创建自己的带状电缆。我将在未来使用这个想法。
Do your solar panels work at all? How much voltage and current do the panels generate in the sun?
Was the extra DC to DC buck converter used to connect the solar panels to the battery module?
I like your idea for using electrical tape and varnished wire to create your own ribbon cable. I will be using that idea in the future ;-)
-Jake
一块太阳能电池板可以产生6V150ma的电量，两块太阳能板可以产生6V300ma的电量，是的直流到直流转换器是用来连接太阳能板和电池模块的。
KJDOT
谢谢。从美国的节日快乐
Thanks. Happy holidays from the USA ;)
Thank you
Upcycle Electronics 不过多次翻折铜线会断,我建议你把合页作为翻折部分的导线，在木板上打孔，将太阳能充电宝的下方的铜线穿过孔，将其焊接于合页下半部，合页上半部分也焊铜丝，并连上半部的太阳能板
Upcycle Electronics 美国的？？
ISKCON new video kab aayega
In which country do you live
I live in China
i think so japan
I'm like wait. He a fan of Kendrick. Lmfao
Name changed to KJDOT. Good
Thank you
@@KJDOT how many ampher did you use when charging?
你能为我们做一个触摸敏感的镜子吗？
Kya tum mujhe one banake doge I give you money
Discover how to do it with Avasva.
I like it so much and plz tell me can i use 2 rechargeable 9v battries instead of the battries that you use ? Plz tell me fast
Can not use 9V battery
nice
GOOOOOOOOOOOD)))))
Thank you
Nice
Thank you
hands off
Spettacolare
这电池板也就够充电板的背光用，用这个给充电宝充电得等到猴年马月
单块太阳能板在太阳充足的情况下可以输出将近200毫安的电量，两块就是400毫安，就比普通1A的充电器慢一倍多左右，偶尔用来冲冲电还是可用的，毕竟是免费能源，不能要求太高
其实光伏板能起到的唯一作用就是装饰，电流小的可怜。
不不不，这个板子单块可以输出160ma的电流，两块就有300ma左右，虽然比较慢，但还是可以用的，日常不推荐使用，但是在户外情况下能不能充电和充电速度快慢是两回事
Why u use switch. For which purpose?
Control switch and LED lighting
why dont you type YOU instead of U
没有中文标题了呢
cool.
can you convert your name into english letters
OK