I cut it from the video because it was waaaaay too complainy, but by jaysus I hate the name of this Gundam. It's literally an oyaji gag (japanese dad joke) pun based on the odaiba area where the Gundam Base Tokyo is located. I can just hear the board of Japanese auld lads cackling away about it now...
Its weird how both bandai and the production of the anime decided that removing the gn condesers on the legs would make this suit somewhat more appealing. The idea behind this suit and kit is truly puzzling.
In the anime, 00 Diver uses the GN Sword 2 rifle mode without turning the blade at a 90° angle because the actual HG can't transform it without taking the blade off
5:42 luckily for me I only collect high grade gunpla so I got thousands of beam saber blade effect parts so this doesn't bother me in the least bit. If I want this kit during stop motions I can just grab a beam saber blade effect part from my effect parts cardboard box from my closet shelf and peg it in to the beam saber handle and I'm all set. So this doesn't bug me in the least bit. Especially if you only collect high grade gunpla.
Mistress Neviah but why a P-Bandai I would have liked a regular HG so I could make it's moduler equipment. Because on some model sites people were buying the phyco Gundam and the hazel as well as the hazel attachments.
I think one of the reasons they left out the beams is because they knew the cheddar cheese master (man that just cracks me up every time) was one of the weaker entries so they put them in there so people might think to get the kit just to have the second main mobile suit, put it in a decent pose with the changeling rifle and never touch it again but give the beams to this guy.
For someone like me who already have built the 00 in less than two weeks before getting the 00 Diver I can tell that the cons shown by Mecha Gaikotsu were already the ones of the original kit ( the stickers on the forehead were already not that good and there was not beam effect at all ). So if you close your eyes on those points you can admit that this is a pretty good kit for its price :)
When putting the sword/rifle in his hads you need to pull the blue guard away from the handle. Then just push the handle all the way down. They pop into place. You'll feel it.
Holy shit you aren’t biased on a model based off of a 10 year old kit this time. Your complaints are justifiable and this was a really solid review. Hope to see more plamo review from you.
Austin King And you know what’s even more disappointing about that kit? It still uses a beam toothpick when other kits at the time already used handles with clear colored blades.
Jordan Yehezkiel That’s a shitty model you have there lmao. Luckily the HGCE is a great model overall. The only model I currently have that has a beam toothpick is the HGUC Bawoo, but I can forgive that model due to its age.
Soul Kuronagi because it was connected to the old Gundam oo runner which was a clear runner making it red would also change all the other clear parts red as well as they are also on the runner
If this is starter set, i did rate the oo Diver 9/10, but this one wasnt and in my opinion, 7/10. Dont get me wrong, I love the design of OO Diver but for this kit, way many pairs of confusing hands and no beam saber effects with only 2 weapons (just one if the beam sabers didnt count). And if I wasn't wrong, a starter set RX78-2 have all the Gundam's weapons and a Paneline Marker
me and my little bro got are first gunpla yesterday. I got the fm barbie lupus, the sd barbie lupus, and the sd astray red frame. I built them all before he could finish half of the 00 diver.
The original 00 gundam also not include the Beams. The beams are 1pcs with the 0-Raiser kits. Maybe we'll also get the beams from the 00 Diver's Add-on
For my opinion, I will just wait for the second upgrade version release. Than I consider to buy this one, cause the first release character always have only few parts, and the upgrade version will always be better and more weapon. (Bandai marketing tactics)
Tfw Gai said "they're like drugs, they wanna get you hooked to get the expensive ones" yet diver HG was my 1st gunpla *Looks at Try burning, Wing fenice, unicorn and FT Optimus* *Stares at a pic of MG dynames* Yeah I'm fucked
I got mine from Barnes and noble and it is very nice. The thing is that the piece on the back of the knees isn't loose. I think it was yours that was loose, not mine. But good review man.
Mecha,the instructions tell you to put the sword with the rifle handle AND a little bit of the trigger,where you flip up the blue pieces a little,and stick the remaining trigger in the hand,and close it up with the blue piece
Gonna get this. If you have the previous HG00 00 Gundam kits (from the 00 Raiser + GN Sword III and the Seven Sword/G) yeah you can put those on the 00 Diver just for funzies.
But I can't find any reviews from you on the GM III Beam Master (Cheddar Cheese lol) ... was that a spoiler that you will upload soon? Or did I not find it?
I like the look of the 00 diver. I'm going to get mine when the ace unit comes out. I'm also planning on using actual paint instead of gundam markers to detail it.
Just normal Sharpies. Blue or green, depending on the intended condenser's colour. Green in this case. I use the paint markers when I don't want light reflecting off the silver in the back.
Very nice Gundam! I am rather annoyed that they are choosing not to include beam blades for the saber handles AGAIN....(HG Unicorn Gundam Destroy Mode, I'm looking at you)....but still, a rather solid kit!
I wonder if the ace diver unit will be a good backpack addition since bandai has been pretty focused on backpacks since G Reco and its been a mixed bag, screw that amazing zaku booster and its loose connection
The fact that you advertised HLJ reminds of.... Sigh...rrobertt184. Seriously I know he's doing reviews on gunpla tv but at the very least he could have put an update what's wrong with him after 3 years.
hey guys, so ive been building gundam for aboout 3 years and i kinda want to build my own gundam like riku. May i know what exactly did he do when building this gundam? Did he mix and match parts then repaint them? and how do you know if a certain part from a gundam will be able to fit into another gundam? for eg the head areas. Thanks alot!
From the looks of the arm it looked like you had to attach the the tab from the swords on the back of the arm (I see the holes there) instead of the indents of the forearms that you showed at the end of the video 🤔
I kinda hate how everuhings crammed up on the top. It's too spiky and blocks form the little parts that make this gunpla great. (I think that's just from the side... backpack? Oh, and I think its a little too spiky... especially the head.
Worst part about this kit is that the beam saber handles not only come empty, but they're incompatible with contemporary beams! I bought the Ninpulse Beams kit specifically for my 00 and 00 Diver and their damn handles are too big!! I don't even know what kits I *can* buy to remedy this...
Not Safe For Work Media I found a solution! Use the original 00 legs if you still have the parts and then just put the diver ankle parts in instead of the 00 ankle parts. Works great for me
I am quite confused with Bandai's choice on this matter. If the beams were the normal ones you could get with most HGs I wouldn't complain as much but as far as I can tell they aren't. I tried to use some of the beams I have and the only ones that would work were 1/100 scale because the hole is scaled more to that size. I looked at one of the only videos that shows just the beam and not the handle for the Cheddar Cheese Master . . . err, I mean the Beam Master's sabers and as far as I can tell they are the smaller, normal for an HG size. I don't know if some of the blades for the 00 series are the right size for it since I don't have any but if they are it still really sucks. If that was the case it would mean that you would have to have specifically one of those older kits or use one of the 1/100 scale as an oversized beam sword. Also the 00 series kits didn't all have beam saber effects and they were different types so if they are the correct size you would have to get a specific kit with those specific blades and you might not be able to. The only good news in this matter is that it is not impossibly hard to find those older 00 kits if the beams are the correct size. As for one of the other comments, whether he uses them often or not is irrelevant to me because I always like to have extra options. Plus, I love the scene in the first battle with the Ogre GN-X where he pulls out the beam sword at the end and I can't recreate that pose without a beam saber!
I cut it from the video because it was waaaaay too complainy, but by jaysus I hate the name of this Gundam. It's literally an oyaji gag (japanese dad joke) pun based on the odaiba area where the Gundam Base Tokyo is located. I can just hear the board of Japanese auld lads cackling away about it now...
Do a mg sniper custom plssssss
Mecha Gaikotsu do you know how to paint the green clear parts, because i want to paint clear part on the forehead
Its weird how both bandai and the production of the anime decided that removing the gn condesers on the legs would make this suit somewhat more appealing. The idea behind this suit and kit is truly puzzling.
Gundam 00 Diver
Gundam "Daburu O Daiba"
Gundam Odaiba
...Yeah, I see it now...
And the Gundam Base Tokyo joke isn't even related to the Unicorn? *I'M DISAPPOINTED*
When I first heard the news of gundam build divers I thought the theme was water and aquatic gundpla idk
Me too would've been cool gunpla fighting in water
@Radcliff Alabas some gundam do
me too
This was my first ever Gundam kit, and you were definitely right about the drug dealer part. I can't stop building and watching your reviews!
Same, i already built about 20 kits now... Drug dealing...
In the anime, 00 Diver uses the GN Sword 2 rifle mode without turning the blade at a 90° angle because the actual HG can't transform it without taking the blade off
it gets loose if you turn the blade when using rifle mode, so it's kinda an improvement I guess
5:42 luckily for me I only collect high grade gunpla so I got thousands of beam saber blade effect parts so this doesn't bother me in the least bit. If I want this kit during stop motions I can just grab a beam saber blade effect part from my effect parts cardboard box from my closet shelf and peg it in to the beam saber handle and I'm all set. So this doesn't bug me in the least bit. Especially if you only collect high grade gunpla.
Drug dealer Bandai :
Pssst hey! Wanna see the good stuffs?
*OPENS COAT FULL OF P-BANDAI*
Kai Summers hey I'm still realing from the P-Bandai Gundam Woundwort.
Kai Summers bandai guy dressed as that merchant dude from RE4 "whotcha buyin"?
We're getting a US release on some P-Bandai, might get the Woundwort too
Mistress Neviah but why a P-Bandai I would have liked a regular HG so I could make it's moduler equipment. Because on some model sites people were buying the phyco Gundam and the hazel as well as the hazel attachments.
That was my Fear
Mr.Fear
I think one of the reasons they left out the beams is because they knew the cheddar cheese master (man that just cracks me up every time) was one of the weaker entries so they put them in there so people might think to get the kit just to have the second main mobile suit, put it in a decent pose with the changeling rifle and never touch it again but give the beams to this guy.
"Jaysus"? "Auld lads"? You're really channeling your Irish heritage in that pinned comment aren't you Mecha?
I approve
Just bought the limited Gundam OO Diver Dive Into Dimension Clear Model kit. So excited to build it.
How was it?
For someone like me who already have built the 00 in less than two weeks before getting the 00 Diver I can tell that the cons shown by Mecha Gaikotsu were already the ones of the original kit ( the stickers on the forehead were already not that good and there was not beam effect at all ). So if you close your eyes on those points you can admit that this is a pretty good kit for its price :)
Glad the 00 diver ace kit gave a clear red instead of red sticker for green color part on the head
Dying to know wtf Bandai was thinking when making the hands and the weapons, it’s just so confusing
When putting the sword/rifle in his hads you need to pull the blue guard away from the handle. Then just push the handle all the way down. They pop into place. You'll feel it.
When he says his name, I can only hear "Dicku"
Holy shit you aren’t biased on a model based off of a 10 year old kit this time. Your complaints are justifiable and this was a really solid review. Hope to see more plamo review from you.
I had the same disappointment when I opened my HG Exia box
Austin King
And you know what’s even more disappointing about that kit? It still uses a beam toothpick when other kits at the time already used handles with clear colored blades.
Zetagundamastley1219 lmao, I got the old HG aile strike 1/144 scale and the beam sword is a flat white saber with a flat white handle and right hand.
Jordan Yehezkiel
That’s a shitty model you have there lmao. Luckily the HGCE is a great model overall. The only model I currently have that has a beam toothpick is the HGUC Bawoo, but I can forgive that model due to its age.
Zetagundamastley1219 Ikr, and I wonder if there's something I can do with it.
I used the non effect beam sabers as reusable toothpicks
I still disappointed about the forehead, why must sticker
Coreneliuszz 23 I know. Why not replace it with a smaller part that is red that can be snap into place like the Barbatos Lupus headpiece for example
Is it possible to put the red sticker behind that green clear part? I haven't seen the manual yet.
Soul Kuronagi because it was connected to the old Gundam oo runner which was a clear runner making it red would also change all the other clear parts red as well as they are also on the runner
Edesse Sapere should be able to if the sticker fits that was what was on the hg Gundam oo seven swords
Just use a red sharpie marker.
Seriously. It's not that big of a deal over such a small piece.
Seeing the Orange GM with that big gun off to the side towards the end of the vid really reminds me of the Mortar from Gears of War.
You have the perfect timing because I'm thinking about buying this or the Exia repair
Alright you finally reviewed it!
If this is starter set, i did rate the oo Diver 9/10, but this one wasnt and in my opinion, 7/10. Dont get me wrong, I love the design of OO Diver but for this kit, way many pairs of confusing hands and no beam saber effects with only 2 weapons (just one if the beam sabers didnt count). And if I wasn't wrong, a starter set RX78-2 have all the Gundam's weapons and a Paneline Marker
cant wait for the diver ace unit
I am currently building it I got the chest done thanks for getting me in to gunpla building I didn’t know it was so fun so thanks
me and my little bro got are first gunpla yesterday. I got the fm barbie lupus, the sd barbie lupus, and the sd astray red frame. I built them all before he could finish half of the 00 diver.
5:37 The same issue as the base HG 00 Gundam, yes the very same kit that doesn't have Beam Saber effect as well
That "out of the gate" pun, whether intentional or not was 👌
I painted mine in Dark Matter Exia colors ^-^)
I like your review . You always have that humor .
notification squadddd from PH
mark vincent simeon hello yes
🇵🇭🇵🇭🇵🇭
I'm late...
PH here just ordered this kit.
mark vincent simeon orayt naman
The original 00 Gundam hg doesn't come with the beam saber effect parts, so it's pretty believable that this kit doesn't.
The original 00 gundam also not include the Beams.
The beams are 1pcs with the 0-Raiser kits.
Maybe we'll also get the beams from the 00 Diver's Add-on
For my opinion, I will just wait for the second upgrade version release. Than I consider to buy this one, cause the first release character always have only few parts, and the upgrade version will always be better and more weapon. (Bandai marketing tactics)
Calling it already: MG 00 Diver months later then RG a few more months after the MG.....
6:08
I think the extra holding hands act as a replacement for if you constantly have it hold weapons.
I just left the sticker on forehead and the ear. for back of the knee, is it a matter if just glue them?
I’m building my oo diver right now I’m still working on the head and the swords I still need to work on the waist arms and legs.
Tfw Gai said "they're like drugs, they wanna get you hooked to get the expensive ones" yet diver HG was my 1st gunpla
*Looks at Try burning, Wing fenice, unicorn and FT Optimus*
*Stares at a pic of MG dynames*
Yeah I'm fucked
Yeah definitely a buy for the HG 00 raiser
I got mine from Barnes and noble and it is very nice. The thing is that the piece on the back of the knees isn't loose. I think it was yours that was loose, not mine. But good review man.
Mecha,the instructions tell you to put the sword with the rifle handle AND a little bit of the trigger,where you flip up the blue pieces a little,and stick the remaining trigger in the hand,and close it up with the blue piece
I gonna buy this
They have separate diver ace pack set, soon to be released...
Gonna get this. If you have the previous HG00 00 Gundam kits (from the 00 Raiser + GN Sword III and the Seven Sword/G) yeah you can put those on the 00 Diver just for funzies.
It looks nicer without the stickers on the clear parts on the head,the red sticker is good tho but the black one's on the side is nyeeeeeehhh.
To hold the GN sword IIs in rifle mode, you need to jam the trigger into the smallee hands. That works for me.
5:57... Suuuuper meta. I LIKE IT
Riku is Unrealisticly overpowered
But I can't find any reviews from you on the GM III Beam Master (Cheddar Cheese lol) ... was that a spoiler that you will upload soon? Or did I not find it?
The very weird fact but true is that the original 00 Gundam kit also does not come with pink beam sabers either
I like the look of the 00 diver. I'm going to get mine when the ace unit comes out. I'm also planning on using actual paint instead of gundam markers to detail it.
I usually paint under the clear part with silver gundam marker, then use a sharpie on the underside of the clear part for effect.
I tried that but instead of a sharpie, I used a meta green gundam marker on the underside of the clean part. What sharpie marker do you use?
Just normal Sharpies. Blue or green, depending on the intended condenser's colour. Green in this case.
I use the paint markers when I don't want light reflecting off the silver in the back.
Ok. Gotcha. I'm in the process of getting my Transient done, so I'll try it on that. Thanks.
looking this kit i'm still wondering does that GN-drive compatible to old HG 00 gundam..?
Unluckily this was my first gundam model which means I had no beams and left wanting
You're supposed to be moving the blue piece in the the GN sword slightly so that it can fit...
I added a lot of the parts for my oo Riser sword 3 and a lot of it fit perfectly so I was able to make it oo diver Riser custom
So is this able to fit the 0 Raiser on it or parts of it?
Very nice Gundam! I am rather annoyed that they are choosing not to include beam blades for the saber handles AGAIN....(HG Unicorn Gundam Destroy Mode, I'm looking at you)....but still, a rather solid kit!
gettin this in may can't wait
I'm a huge fan of the 00 gundam but.... I'm still not crazy about this design... I guess it will grow on me
They paint the clear part in the gn swords II (too late daddy) !! And yeah, you should get the extension parts for O Daiba and see what we've got :p
hopefully we get a flag custom in divers
Will you review the og 00 gundam kits? (Raiser, 7-Sword-G)
I wonder if the ace diver unit will be a good backpack addition since bandai has been pretty focused on backpacks since G Reco and its been a mixed bag, screw that amazing zaku booster and its loose connection
Idk why when i saw Rikku in this video, i remembered this Mecha gaikotsu guy.. it might be him in anime
The fact that you advertised HLJ reminds of....
Sigh...rrobertt184. Seriously I know he's doing reviews on gunpla tv but at the very least he could have put an update what's wrong with him after 3 years.
hey guys, so ive been building gundam for aboout 3 years and i kinda want to build my own gundam like riku. May i know what exactly did he do when building this gundam? Did he mix and match parts then repaint them? and how do you know if a certain part from a gundam will be able to fit into another gundam? for eg the head areas. Thanks alot!
4:41 Foreshadowing? Aw... I like the GM III!
Mecha Gaikotsu-san, Have you ever tried to build a Kotobukiya kit? I tried to build a Jehuty but it's full of small parts.
Does Grimoire Red Beret have release date? It's nearly end of the month and I've been looking toward to it...
did you paint the gundam?? as it looks so good
I like the original better. The new way the beam rifle mode works is great, but I already like them that way
is that a figma stand? How did you get the Gunpla to stay on that. Mine don't fit into the holes
From the looks of the arm it looked like you had to attach the the tab from the swords on the back of the arm (I see the holes there) instead of the indents of the forearms that you showed at the end of the video 🤔
I wonder what you would get if you combine this with the Wing Zero
I kinda hate how everuhings crammed up on the top. It's too spiky and blocks form the little parts that make this gunpla great. (I think that's just from the side... backpack? Oh, and I think its a little too spiky... especially the head.
I love this kit, tho just a few weeks in one of the only hands that could actually hold the weapons well were lost by my uncle's nephew.
Yes this is my first hg kit
Worst part about this kit is that the beam saber handles not only come empty, but they're incompatible with contemporary beams! I bought the Ninpulse Beams kit specifically for my 00 and 00 Diver and their damn handles are too big!! I don't even know what kits I *can* buy to remedy this...
I like it, but I think I'll wait for the 00 Diver Ace to be released
"Cheddar cheese master". I like it.
You are suppose to put the sticker first then the clear part
Is it just me or can you change some parts with the extra exia parts in the part holders
Which double has a blaster blade like weapon im trying to do a blaster blade build but i need that sword
Are there any major issues with the kit so far?
What do you think of the new gundam 00 sequel ?????
Hey Mecha Gaikotsu, can you review the diver ace unit please 🙏 🙏 🙏
gonna kitbash this with the original 00
Is that seven swords behind oo diver at 0:55??? Pls tell.
I'm waiting for the 00 diver ace :)
As far as i can remember,almost non exia hg in hg 00 only have the saber handle
Almost got it
I hate gundam OO Diver the sideskirts always fall off and as hard as i try the torso and the hips would always fall
did you try to attach a build fighters booster?
Which do you prefer the master grade or the real grade
What do you think about Rg Banshee norn?
So with that red sticker on the head , better or worse?
It built so well, sadly I just pushed my thumb every part just To built my first gundam collection
I messed up with the plastic of the kit and I broke it, rip
Do the ankle parts on your kit fall off? Because when I put them on they don’t even click on. They just immediately fall off and it’s pissing me off
Mr Roboti oh damm thats happening to me too.
Not Safe For Work Media I found a solution! Use the original 00 legs if you still have the parts and then just put the diver ankle parts in instead of the 00 ankle parts. Works great for me
Mr Roboti yeah i was fiddling around with the extra parts and i put that together. Really solid. Better than the actual legs.
I love the opening for the anime
how about another extra two gn engine? mine got extra twin gn..
What?? No beam saber effect but we've got the beam saber? For what??
In the series it has no beams and are used more like a throwing weapon
The original 00 Gundam kit also has no beams included so this makes sense
TraKen oh really? Thanks for the info I didn't know that the original 00 didn't come with beam saber effect too.
I am quite confused with Bandai's choice on this matter. If the beams were the normal ones you could get with most HGs I wouldn't complain as much but as far as I can tell they aren't. I tried to use some of the beams I have and the only ones that would work were 1/100 scale because the hole is scaled more to that size. I looked at one of the only videos that shows just the beam and not the handle for the Cheddar Cheese Master . . . err, I mean the Beam Master's sabers and as far as I can tell they are the smaller, normal for an HG size. I don't know if some of the blades for the 00 series are the right size for it since I don't have any but if they are it still really sucks. If that was the case it would mean that you would have to have specifically one of those older kits or use one of the 1/100 scale as an oversized beam sword. Also the 00 series kits didn't all have beam saber effects and they were different types so if they are the correct size you would have to get a specific kit with those specific blades and you might not be able to. The only good news in this matter is that it is not impossibly hard to find those older 00 kits if the beams are the correct size. As for one of the other comments, whether he uses them often or not is irrelevant to me because I always like to have extra options. Plus, I love the scene in the first battle with the Ogre GN-X where he pulls out the beam sword at the end and I can't recreate that pose without a beam saber!
You can actually just put any beam riffle effect from tandem serieses