PARAMETRIC CONCAVE RANGE HOOD: Part 2 of 2...Build Your Own Using Mozaik Software!

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 10

  • @RetrotechCNC
    @RetrotechCNC 2 роки тому

    This is great, thanks Nic. Finally spent some time getting this second part done.

  • @jovenbassi
    @jovenbassi 3 роки тому +1

    Really appreciate.

  • @AaronRolls-cm6sh
    @AaronRolls-cm6sh 4 місяці тому

    How do you do the FEnd R panel? Ive tried multiple times but it keeps putting my tool path at the back of the panel.

  • @michaelbaucom8220
    @michaelbaucom8220 2 роки тому

    Holy formula. Question. Does the miter tool for the tool path. Will that cut through the material. I'd imagine so to get the full miter surface.
    I guess what I'm asking is the cutout tool (for me 1/4 compression) would cut three sides and the miter tool cut out the arc all the way through?
    Also seems like an array copy would be a good feature for Mozaik to implement.

  • @scottwilliams8563
    @scottwilliams8563 2 роки тому

    Wondering if you can curve the ends also?

    • @frostcnc4712
      @frostcnc4712  2 роки тому

      Hey Scott...I've got a parametric 3 sided concave framework in my webstore...www.frostcnc.com/shop

    • @scottwilliams8563
      @scottwilliams8563 2 роки тому

      @@frostcnc4712 I see that. I will probably be needing to buy that. I guess you just aren't able to cut the faces on the 3 sided ones like you show here on the 1 sided one.

    • @frostcnc4712
      @frostcnc4712  2 роки тому

      Unfortunately not Scott... another software option like SketchUp would have to come into play.