Thank you sooo much! I thought i was the only one having difficulty with this same kb and same switches...although my other mech & switches were easy to remove, but this blue outemu gave me a hard time. This is a big help for a first timer like me removing switches. thank you!
Can confirm that these blue switches are an absolute pain in the backside to pull! It took me about two hours to remove all 87 switches from my keyboard (five of those even broke), and now i got blisters on three of my fingers.
Man you just saved a life of an innocent red switch that almost got decimated . For real tho this is a really helpful advise! Cause i thought my redragon fizz was sodered instead of hotswappable, but it was just the way of pulling the switch that i got wrong.
True, i have the same board, but I eventually used Flathead screwdriver to lift the corners with the assistance of a decent switch puller. Apparently not only outemu switches have this problem, the akko switches are also quite hard to pull. It's either the plate,pcb or maybe just the switch itself. I guess just use tweezers or as I have mentioned above, flathead. screwdriver.
Yo sir, thank you sa forward motion na technique sa pag pull ng switch. for a first-timer less than 5 minutes lang inabot ko sa pagpalit ng isang switch.
thank you very much for your help i break me E key while fixing but still it working because of your help thanks you very much E key most important in gaming glad it workings look at this eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
Thank you so much! Your tutorial is a great help. First time to encounter this problem and the term for it is misfiring. Learned from you. Thank you so much. My RAKK ILIS is same as yours but the white one. Again, thank you so much. 😊😊
Thank you, Sir! i thought I have but another keyboard or switch the switch with another switch on a key that I don't use often. when I saw then "Switch Puller" i remembered I have extra switches that did come with the keyboard. I no longer have any issues with my letter "I". Thank you!!!
I have a rakk ilis with outemu red and nagloko A key ko so I have to replace the switch. As I was trying, ma hirap ipull out ng switch so I searched on UA-cam for tutorial and found your vid. Turns out, nangyari dn sakin na nasira yung housing ng switch hahahaha. Pero successful naman pag replace ko ng switch sana wala nang switch na magloko haha. Thanks for the video.
Sobrang hirap talaga ingatan. Naisip ko nga, baka sadya nilang ginawa yun para may sign or mark na yun yung defective key pag tanggal. Para hindi malito. Hahahaha.
sa wakas, ito na ang sagot sa ilis ko...grabe sobrang dameng swithes na nang akin mis fire.. by the way sir thanks, nakulangan lang ako nang before and after test mo sir pero goods parin salamat..
glad to know na nakatulong ako kahit papano chief. sinubukan kong mag shoot ng before and after. kaso, kung kelan ko need mag misfire yung switches, ayaw naman. hahaha. biglang tumino nung magshoshoot na ko ng vid. parang alam nyang papalitan na siya. hahaha
I wish that this works everytime. No matter how careful we are, we still break 'em sometimes. If I get to learn or discover a better technique, will sure post it here again. Thank you for the support!
It's not just the default switch. I replaced mine with an Akko switch, then months later, I decided re-lubed my switch, unfortunately, some of my akko switches broke while removing it ☹️
Salamat dito boss, ang tigas talaga nyan haha ung sakin na kasama na puller naputol e. Antayin ko order kong puller sa shopee. Kasali ka ata sir sa keyboard addicts ph sa fb kasi naka customize ung keyboard mo.
Found a way to minimize the damage sa switch housing. Pag na lift na yung front part to the point na pwede ka na makapag insert ng tweezer(not too pointy as it will damage the plate), just use leverage to lift up the housing from the thicker corners so there won't be any damages to the top housing. I used a tweezer that was too pointy and scratched the steel plate but not visible when installed naman na yung switch.
Hi sir can you do a video on replacing switches on non hot swappable keebs, i wanna replace my fantech mk853 coz its already doubling input and sometimes wont input
The reason why its hard to remove the switch because rakk puts anti theft if some one is gonna steal your switch inside the keyboard ( i think its stupid ) they make it thight so that its hard to remove or to steal i dont know if thats the reason but it says on the rakk tandus 87 80% keyboard
@@ThePs1111 ano massugest mo. Blue or red switch. Balak ko kumuha nito. Gagamitin ko kasi for gaming and more on typing. Alam ko red for gaming kaso baka pangit siya sa typing ayun ang nabasa ko sa mga red sa games lang talaga. Tama ba?
If the reason you replaced it is just because you wanted to try other switches, even if its not broken. Then yes. It will still work. Problem is, you will have a harder time pulling it out the next time. In my case, I replaced it because it was already misfiring/not firing at all.
Sorry chief I dont think you can swap the cherry switches of the rakk sinag. Havent had the opportunity to check it personally. But based on other reviews, sorry to say that its not hot swappable.
Just to confirm, i can change my blue switch to red switches? I'm an impulsive buyer and i bought a rakk ilis blue switch 😅 not knowing about different kinds of switch and difference it makes when I type. Thank you.
Tried replacing it with gateron brown, Napipindot siya pero naka awang or angat siya pwede na mapagtiyagaan, kala ko ako lang nag kakaissue sa kebs na to, anyway salamat kala ko di hotswappable sa sobrang tigas niya, siguro soon order nalang ako ng outemu
hi, how did u remove the broken switch? i accidentally broke the little switch that we need to pull in order to remove it and now i don't know how to remove it :D
is it the one you push while pulling? its okay, you can still pull the switch starting from the rear part, you should hear a "click". after that click, you should be able to pull the switch entirely. it will require an extra amount of force though.
If the switch itself still works, yes you can. But if the small plastic part is already broken, it will harder to take out if you decide to replace it with a brand new one.
May 2020. Why it misfired? Sorry i have no answer to that. I dont abuse it or anything. Tried cleaning the contacts but it didnt fix it. A key started misfiring roughly 4 months after the purchase. I have a Rakk lam-ang as well, got it around Oct 2020. All switches are still fine. No ghosting/misfiring whatsoever.
Not sure about the u4t switches since they have extra pins on both sides. You may try sanding or cutting the extra pins to make it fit though. And see if it will work and perform fine.
Di ako sure sa easypc sir. Pero may mga nagrerepair ng keyboard talaga. Usually nagpopost sa mga fb groups. Search mo sir sa FB "mechanical keyboard repair". May lalabas dun. Or if possible, join ka na rin sa mga fb groups ng mkb.
kung basag na yung plastic, hindi na maayos. hindi lahat ng tinatanggal ko ay dahil sira na. yung iba kasi, gusto ko palitan ng ibang switch type. kaya hanggat maari, okay sana kung hindi masira pagtanggal para may reserba kang magagamit.
Congrats sa ilis chief. Swappable ng outemu-outemu only. Some tried other brands but experience some fitment issues. Some tried cutting and sanding down the legs and contacts to make it fit.
Hello informative video, i already ordered this keyboard due to many reviews they said the build looks and performance is good, im just wondering if gateron is better than otemu blue switch, btw i ordered blue switch, more power to the channel boss😇
We appreciate your support boss. Havent yet tried gateron switches. But accdg to some of what ive read, Gateron is more durable and smoother. In reddit, ive read that outemu is more stable. Gateron wobbles a bit. Also, budget is something i really consider, thats why i decided to just stick with outemu.
Binubuksan ko yung mismong switch pag nagsimula ng mag misfire. Tapos gagalawin ko lng yung copper nya sa loob. After that ayos na yung switch mo. 1 year and half ko na ginagawa yun di pa ako bumibili ng bagong switch.
kung hindi na talaga gumagana yung reset(fn+prtsc for 3-5sec), pinakamadaling solution is ipagpalit na lang yung keycaps since same size lang naman sila. Isa pang solution is try mo reporgram yung keys using the rakk finetuner na software. kunin mo na lang dito sa sa rakk.ph. rakk.ph/pages/drivers-softwares
@@ThePs1111 yes. nag palit napo ako ng new switch yung spare na nasa box. hindi lang din un ang issue. pati alt at windows key nagpalit sila ng function. tas yung FN+ALT+F7 or F8 di gumagana
@@warrenhasley1106 aw. Kung ganun sir, mas mabuti kung pacheck nyo na yan sa expert. Kung under warranty pa siya, best kung contact nyo na yung seller.
SIr I have a problem with my rakk Ilis sometimes the key works well sometimes it stops working for a while and you need to press the key again for it to work. What should I do sir do I need to replace the key?
Replace na yan chief. What i do is.. kung isa lang naman, i just swap it with a key na hindi ko masyado ginagamit like scroll lock or pause key. Pero kung marami na, bili ka na ng switches. Below is yung link kung san ako bumibili. shopee.ph/product/203787783/3446159319?smtt=0.188845089-1612004504.9
You can moist it with lighter fluid. Remove the switch then use a cotton bud moist and clean the contact patch in the circuit. Let it dry for a few mins return the switch and key cap. Works like a charm most of the time
Outemu lang chief. Meron ako nabasa sa mga FB groups, pinalitan niya ibang switch(not sure kung gateron or cherry). Pero may mga pinutol and niliha siya para magkasya.
parehas lang po ba ng outemo red the way pag tanggal nyo po ng blue switch? or is it soldered po yung outemo red? tried pullin it, ang tigas po talaga, ganyan din tuloy na damage yong front,.tnx po
Same chief. Pwede mo sila palitan from red to blue/brown outemus. Grabe lang talaga hirap tanggalin. Talagang pwede masira. Naisip ko nga, baka sinadya yung para ma-identify naten kung ano yung defective switch kapag magpapalit tayo.
Ayan good question sir. Sa totoo lang mejo mahirap kasi based lang talaga sa tingin mo. lalo na sa mga online shopping apps. madalas kasi hindi talaga nakalagay ng maayos sa description yung dimensions ng caps. malalaman mo na lang based on reviews and sa itsura ng keycaps. pero sa ilis and lam-ang, madalas ko tinitignan is yung middle part. yung "\" , enter, and shift key. kung complete yung details sa page nung seller, eto yung sizes ng ilis and lam-ang, para jan sa keys na yan.(kung hindi ako nagkakamali) hehe. "\" = 1.5u Enter = 2.5u Shift = 3u Then yung mga keys sa baba sa both ends ng spacebar (ctrl,win,alt,fn, etc.), puro 1.25u ang size niya.
Outemu lang recommended chief. May mga nabasa ako na nagttry ng ibang switches pero may ginawa sila para magkasya. Either may puputulin or lilihain na pins para magkasya.
Pwede sir. As long as same switches lng gagamitin. In this case, puro outemu switches lng pwede. So if naka blue switch ka, pwede mo palitan ng red or brown switches. Meron na rin nagsasabi na nakasubok na rin sila magpalit ng ibang brand ng switches. Subukan ko rin mag experiment then post ako bago video kung meron compatible akong nakita.
@@ThePs1111 Thank you po sir. Tsaka sa una lang po ba yung may masisirang switch? Once napalitan na lahat di na siya parang mahirap tanggalin na tipong may masisira pa ganun?
sir, sinunod ko naman to pero pasaway pa rin mga switches :( sobrang hirap tanggalin to the point na naputol ko na yung mismong plastic. hindi ko na alam paano tatanggalin yung switch. kaloka.
Nangyayari rin saken sir. Meron mga switch na kakaiba talaga yung pagkakalagay. Ayaw talaga magpatanggal. Dami ko na rin nasira. Minsan nga gusto ko nang lihain yung butas ng keyboard para lumaki ng konti.
@@havendee6679 hindi ko marecommend yun kasi baka may madamay pang parts sir. Mas okay na yung masira yung switch sa pwersa kaysa yung buong plate or yung board.
Hot swappable sya with other outemu switches chief. Havent tried using other switches like gateron. Pero may nabasa ako na you may need to modify other switches(other than outemu), to fit the plate.
Try nyo po gamitan ng maliit na flat screwdriver as lever. Then ingatan nyo na lng po wag madamage yung ibang switch or magasgas yung board. Grabe po kasi talaga tigas nyan. Worst case, baklas plate.
Nahirapan din ako sa pagtanggal ng switch kaya napunta ako sa video na to haha. Pero nagtry ako na dun sa white part ng switch i hold yung puller, hold and pull. I find it easy pero di ko sure kung ok lang yun o baka mas makasama/ masira pa sa switch. Safe po kaya yun haha?
As long mapindot yung lock chief. Oks yun. Mas ok rin yung sa white part for me if possible. Matigas yun eh. Talagang yun prob ng karamihan. Kaya napabili ako ng extra switches para sigurado.
Hot swappable sya with other outemu switches chief. Havent tried using other switches like gateron. Pero may nabasa ako na you may need to modify other switches(other than outemu), to fit the plate.
Thank you sooo much! I thought i was the only one having difficulty with this same kb and same switches...although my other mech & switches were easy to remove, but this blue outemu gave me a hard time. This is a big help for a first timer like me removing switches. thank you!
Can confirm that these blue switches are an absolute pain in the backside to pull! It took me about two hours to remove all 87 switches from my keyboard (five of those even broke), and now i got blisters on three of my fingers.
True! Sadly not just the blue. Most(if not all) outemu equiped keebs have the same feedback.
@@ThePs1111 true, i have outemu reds on raak ilis and they r so hard to pull out
I have the same switches in my leavenk620, it took me 3-4mins to remove a single switch😆
Man you just saved a life of an innocent red switch that almost got decimated . For real tho this is a really helpful advise! Cause i thought my redragon fizz was sodered instead of hotswappable, but it was just the way of pulling the switch that i got wrong.
True, i have the same board, but I eventually used Flathead screwdriver to lift the corners with the assistance of a decent switch puller. Apparently not only outemu switches have this problem, the akko switches are also quite hard to pull. It's either the plate,pcb or maybe just the switch itself. I guess just use tweezers or as I have mentioned above, flathead. screwdriver.
*i found you, Alquinさん*
Yo sir, thank you sa forward motion na technique sa pag pull ng switch. for a first-timer less than 5 minutes lang inabot ko sa pagpalit ng isang switch.
maraming salamat po sa panonood sir. glad to hear po na nakatulong.
I was looking for a vid, specifically with regards to this keyboard and switches because I was planning to mod mine. Thanks a lot!
thank you very much for your help i break me E key while fixing but still it working because of your help
thanks you very much E key most important in gaming glad it workings
look at this
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
WTF same. letter E is also my issue. I need to press it hard for it to work lol.
Thank you so much! Your tutorial is a great help. First time to encounter this problem and the term for it is misfiring. Learned from you. Thank you so much. My RAKK ILIS is same as yours but the white one. Again, thank you so much. 😊😊
maraming salamat lalo na sa tinuro mong technique sa pagtanggal ng switch really helpful!
good to know na nakatulong sir. ingat ingat pa rin. lately nagpalit ulit ako ng ibang switch, may nasira pa rin ako. hahaha
salamat sir. kakabili ko lang gn ilis ko atleast alam kona. Mas mahirap pa pala to tanggalin kesa sa kumara
Thank you, Sir! i thought I have but another keyboard or switch the switch with another switch on a key that I don't use often. when I saw then "Switch Puller" i remembered I have extra switches that did come with the keyboard. I no longer have any issues with my letter "I". Thank you!!!
I thought it was just me who's having issues with the Outemu switches on Ilis. I managed to mess up 8 -10 switches while trying to mod my wife's keeb.
Ahaha. Same here chief. Those switches are tightly put in there. Parang its meant to be broken when replacing.
found this vid...stock switches in the rakk ilis is just effin hard to take off..
OMYGOD THANK YOU FOR THAT ADVICE. I PULLED MINE EASILY WHEN I DID THE FORWARD MOTION
Thnx for the video bro, I would not mind breaking it since my intention is to replace it. Love the keycaps.
I use the flat side of a cuticle pusher to hook into the thick part and use the leverage to pry it up.
Will definitely try this. Thanks for the tip sir!
Thank you for emphasizing that it's really hard to pull! I thought that maybe it was just me and that if i pulled harder itnmight break
@Jessa DT akin oo hahaha, bwesit di na matanggal
I have a rakk ilis with outemu red and nagloko A key ko so I have to replace the switch. As I was trying, ma hirap ipull out ng switch so I searched on UA-cam for tutorial and found your vid. Turns out, nangyari dn sakin na nasira yung housing ng switch hahahaha. Pero successful naman pag replace ko ng switch sana wala nang switch na magloko haha. Thanks for the video.
Sobrang hirap talaga ingatan. Naisip ko nga, baka sadya nilang ginawa yun para may sign or mark na yun yung defective key pag tanggal. Para hindi malito. Hahahaha.
@@ThePs1111 or baka yung outemus lang madali masira hahaha
@@janmelchie66 mukhang ganun na nga chief. Hahaha. Well, mura lang kasi compared to other switches eh.
Ate pano mo po natangal ung sirang housing, di ko po matangal ung akin ih.
Thank you so much for this vid!! I was wondering if the Rakk Ilis PBT switches' were hot swappable for longevity and this vid was super helpful!!
welcome! glad to know the vid helped.
sa wakas, ito na ang sagot sa ilis ko...grabe sobrang dameng swithes na nang akin mis fire.. by the way sir thanks, nakulangan lang ako nang before and after test mo sir pero goods parin salamat..
glad to know na nakatulong ako kahit papano chief. sinubukan kong mag shoot ng before and after. kaso, kung kelan ko need mag misfire yung switches, ayaw naman. hahaha. biglang tumino nung magshoshoot na ko ng vid. parang alam nyang papalitan na siya. hahaha
@@ThePs1111 good parin sir maraming thanks
very helpful! thank you! i switched mine just now.
its really annoying on blue switches, wanna replace it with reds or lubes in the near future.
my keyboard is rakk pluma
Thank You Sir Now I Know how to Pull Switch Right way thank you
I wish that this works everytime. No matter how careful we are, we still break 'em sometimes. If I get to learn or discover a better technique, will sure post it here again. Thank you for the support!
those switches that were damaged while pulling out, are they unsable na? do they feel different when you use them again?
Thank you boss... Naayos ko na yung keyboard ko
Most helpful video! Thank you!
It's not just the default switch. I replaced mine with an Akko switch, then months later, I decided re-lubed my switch, unfortunately, some of my akko switches broke while removing it ☹️
Just got mine today (Rakk Ilis Red Outemu), 3:00 is definitely an experience lmao. Still haven't removed it 😭😭
Thx I really needed to swap my w key since it was glitching out
Salamat dito boss, ang tigas talaga nyan haha ung sakin na kasama na puller naputol e. Antayin ko order kong puller sa shopee. Kasali ka ata sir sa keyboard addicts ph sa fb kasi naka customize ung keyboard mo.
welcome bossing. yes, kasali ako dun. malulupit keyboards nila dun eh. hahaha. nakakahiya mag post.
@@ThePs1111 haha sabi na e. Post mo din yan dun boss.
@@ThePs1111 nga pala sir pag na tangal na ba sya at ibabalik ulit ung switch , madali nalang ba sya tangalin?
Ganun pa rin. Hahaha. Mahigpit talaga.
@@ThePs1111 haha bakit ganun sir? di na nga virgin masikip parin xD
Found a way to minimize the damage sa switch housing. Pag na lift na yung front part to the point na pwede ka na makapag insert ng tweezer(not too pointy as it will damage the plate), just use leverage to lift up the housing from the thicker corners so there won't be any damages to the top housing. I used a tweezer that was too pointy and scratched the steel plate but not visible when installed naman na yung switch.
Nice! Thanks sa suggestion chief. Susubukan ko to next time mag palit ako ng switch.
on my keyboard my 3edc keys stopped working they work sometime and start all at once or work all at once can you plz guide me what do i do
Youre crazy but this was helpful, I think I can follow this and replace on my original rk-9000 rosewill, with blues. Thank you
Can you put back the old switch if it's not broken?
Yes you can
love that thinline behind you.
Thanks for noticing. Recently cleaned it. Took off the pick holder, replaced the bridge and the rusted screws.
I bought a gigaware k880 it's how swappable tho but the problem, is outemu switches are gonna fit thru it
Hi sir can you do a video on replacing switches on non hot swappable keebs, i wanna replace my fantech mk853 coz its already doubling input and sometimes wont input
hi im new. can you replace these outemus with yellow gaterons? or is the rakk ilis exclusively houses outemus only?
hi. sad to say you cant. akko switches are good replacements.
ua-cam.com/video/sAi8xSi_LPs/v-deo.html
Thank you for crucial info!!! It really helped me!
can you put other switches other than the outemu switches?
Yes. So far, the best alternative i'm using are akko switches.
ua-cam.com/video/sAi8xSi_LPs/v-deo.html
My keyboard switches must have been lower quality, since the forward motion when pulling straight up tore the upper housing :(
is the red switch variant hot-swappable?
Yes sir, it is.
Like your video, the background is so cool.💯I just can't keep my eyes off the pic of you. Hahaha
Ahahaha. Thanks for noticing. It was a caricature of myself that was gifted to me.
The reason why its hard to remove the switch because rakk puts anti theft if some one is gonna steal your switch inside the keyboard ( i think its stupid ) they make it thight so that its hard to remove or to steal i dont know if thats the reason but it says on the rakk tandus 87 80% keyboard
If that is indeed the reason, i agree that its stupid. Why waste your time stealing a switch when you can just steal the whole keyboard. Hahaha
Very informative. Thankyou, sir
Ty so much for the help
salamat lods for this!
i have a question i can change one switch from the same keyboard? for example my ( E switch its bad atm ) i can use the switch from the letter P ?
Yes you can. I did that before when I had no extra switches. I replaced it with the ones that I dont use often.
@@ThePs1111 thanks
Maraming salamat po!!! kala ko hindi hotswappable sobrang tigas nung una kong ginawa
Thanks rin chief! Sobrang tigas lang talaga nyan grabe.
Hi, I was wondering if the cherry mx keycaps would fit the outemu red. Planning to get a few resin keys for my gf's rakk ilis. Thanks!
Sorry for the late response. Yes chief. It should have no problems.
Pano niyo po natanggal yung switch ng plus and enter?
So you can switch them with either red outemu if you had those switches?
Yes you can
@@ThePs1111 ano massugest mo. Blue or red switch. Balak ko kumuha nito. Gagamitin ko kasi for gaming and more on typing. Alam ko red for gaming kaso baka pangit siya sa typing ayun ang nabasa ko sa mga red sa games lang talaga. Tama ba?
@@maddymuhat8079 kung gusto mejo middle ground between gaming and typing, try mo brown sir.
@@ThePs1111 ah pede ba siya palitan magkano yung ganyan?
@@maddymuhat8079 yung switch sir? Eto:
shopee.ph/product/203787783/3446159319?smtt=0.188845089-1627692314.9
i was wondering if the red switch rakk illis is hotswap too
I'm using the non PBT version with red switches. It is hot swappable.
Is the switch still good to use even if the part ur talking about is broken?
If the reason you replaced it is just because you wanted to try other switches, even if its not broken. Then yes. It will still work. Problem is, you will have a harder time pulling it out the next time.
In my case, I replaced it because it was already misfiring/not firing at all.
How do u repair dead led for rakk illis?
Can we also do this with Rakk Sinag?
Sorry chief I dont think you can swap the cherry switches of the rakk sinag. Havent had the opportunity to check it personally. But based on other reviews, sorry to say that its not hot swappable.
Just to confirm, i can change my blue switch to red switches? I'm an impulsive buyer and i bought a rakk ilis blue switch 😅 not knowing about different kinds of switch and difference it makes when I type. Thank you.
Yes you can. You may also tefer to the link on the description just in case. I got my switches from that shop.😁
Tried replacing it with gateron brown, Napipindot siya pero naka awang or angat siya pwede na mapagtiyagaan, kala ko ako lang nag kakaissue sa kebs na to, anyway salamat kala ko di hotswappable sa sobrang tigas niya, siguro soon order nalang ako ng outemu
Yes chief. May nabasa ako, pinutol nila yung paa ng gateron then konting liha to make it fit. Glad to know it works. Hindi naman sya wobbly?
hi, how did u remove the broken switch? i accidentally broke the little switch that we need to pull in order to remove it and now i don't know how to remove it :D
is it the one you push while pulling? its okay, you can still pull the switch starting from the rear part, you should hear a "click". after that click, you should be able to pull the switch entirely. it will require an extra amount of force though.
Can you still use the switches with damaged plastic part?
If the switch itself still works, yes you can. But if the small plastic part is already broken, it will harder to take out if you decide to replace it with a brand new one.
How long have you been using that keyboard? Why did it start misfiring?
May 2020. Why it misfired? Sorry i have no answer to that. I dont abuse it or anything. Tried cleaning the contacts but it didnt fix it. A key started misfiring roughly 4 months after the purchase. I have a Rakk lam-ang as well, got it around Oct 2020. All switches are still fine. No ghosting/misfiring whatsoever.
@@ThePs1111 lam ang pro or lite sir?
@@jcsnpdr lam ang lite chief
I have outemu gold switch and it is really hard. my first try it got bent then I did not proceed after that haha😂
Hello, can i replace my rakk ilis outemu red to boba u4t switches?
Not sure about the u4t switches since they have extra pins on both sides. You may try sanding or cutting the extra pins to make it fit though. And see if it will work and perform fine.
may tanong po ako, saan po pwede mag pa repair ng rakk ilis? nag papa repair ba po ang easypc kahit hindi galing sakanila yung keyboard?
Di ako sure sa easypc sir. Pero may mga nagrerepair ng keyboard talaga. Usually nagpopost sa mga fb groups. Search mo sir sa FB "mechanical keyboard repair".
May lalabas dun. Or if possible, join ka na rin sa mga fb groups ng mkb.
Ehh ok lang namn po atang masira yung tinangal kasi kaya nga po tinggal kasi diba sira na nga po?? Pwede pa po ba maayos yung tinanggal nyo na sira?
kung basag na yung plastic, hindi na maayos. hindi lahat ng tinatanggal ko ay dahil sira na. yung iba kasi, gusto ko palitan ng ibang switch type. kaya hanggat maari, okay sana kung hindi masira pagtanggal para may reserba kang magagamit.
Hot swappable po ba yung outemu red variant? I’m having problem with my w key po kase and I’m planning to replace it sana
yes sir.
@@ThePs1111 okay thank you po!
Hello sir! What switches are compatible with Rakk Ilis? Is it just Outemu or we can use other brands?
Akko switches are great replacements. You can check it out here.
ua-cam.com/video/sAi8xSi_LPs/v-deo.html
@@ThePs1111 noted po sir! Will check it out hehe thank youu!! 💕
This isn't limited to Rakk MKBs only, all Outemu branded switches are a bitch to pull and replace.
Can I change red ones? nag mimiss fire na kase w ko
Yes chief. Pwede outemu red. Kahit halo halo sila. As long as outemu rin. You should have no probs.
Here's the link kung san ako bumili. Sana makatulong.
shopee.ph/product/203787783/3446159319?smtt=0.188845089-1615547560.9
@@ThePs1111 Took me 2 months to reply but thanks bro! The link will really help!
where did you buy the switches? can you give me the link? pleaseee
Here
shopee.ph/product/203787783/3446159319?smtt=0.188845089-1623377326.9
Hot swappable po ba yung yellow variant?
Unfortunately, hindi po. Soldered yung gateron yellow variant.
@@ThePs1111 Thank You!!!
i got rakk illis blue outemu switches, is it also hot swappable?
Congrats sa ilis chief. Swappable ng outemu-outemu only. Some tried other brands but experience some fitment issues. Some tried cutting and sanding down the legs and contacts to make it fit.
Hello informative video, i already ordered this keyboard due to many reviews they said the build looks and performance is good, im just wondering if gateron is better than otemu blue switch, btw i ordered blue switch, more power to the channel boss😇
We appreciate your support boss. Havent yet tried gateron switches. But accdg to some of what ive read, Gateron is more durable and smoother.
In reddit, ive read that outemu is more stable. Gateron wobbles a bit. Also, budget is something i really consider, thats why i decided to just stick with outemu.
I´m seeing this video after killing 7 switches. ._.XD
Oof
Hi where did you buy the outemo switches? Can you drop some link bro very apreciated, nice video.
Thanks chief. Here is the link where i got the switches.
shopee.ph/product/203787783/3446159319?smtt=0.188845089-1616126585.9
I just wiggle mine off so it doesn't break.
Binubuksan ko yung mismong switch pag nagsimula ng mag misfire. Tapos gagalawin ko lng yung copper nya sa loob. After that ayos na yung switch mo. 1 year and half ko na ginagawa yun di pa ako bumibili ng bagong switch.
Nice chief. Sige try ko rin ito. May mga nagmimisfire na ulit saken.
i have a question can cherry mx switches fit in rakk illis?
Sadly no. Cherry switches have thicker pins than outemu. You may be able to sand it down to make it thinner. But its risky.
@@ThePs1111 thx for the info :D
@@ThePs1111 because outemu switches always misfire even when i buy new ones
Basta outemu switches sir compatible sa ilis no? Or may iisang specs lang para sa ilis?
Basta outemu sir. Any color sure yan.
@@ThePs1111 thankyou po!
Sir, please try change led lights sid..
Boss, compatible din kaya ang Kailh switch dito?
Good thing I didn't pull my switch lol (I don't have extra switch) and i'm fine with red switch (outemu)
Paano kung ayaw mareset ng keyboard?
tapos yung ALT naging Windows key, ung windows key naging ALT?
sana mareplyan
kung hindi na talaga gumagana yung reset(fn+prtsc for 3-5sec), pinakamadaling solution is ipagpalit na lang yung keycaps since same size lang naman sila.
Isa pang solution is try mo reporgram yung keys using the rakk finetuner na software. kunin mo na lang dito sa sa rakk.ph.
rakk.ph/pages/drivers-softwares
@@ThePs1111 tinry kona lahat ng katabing keys hindi paden nagana. tinry kona din ireset at ayusin sa finetuner pero wala talaga
@@warrenhasley1106 paanong hindi nagana sir? Yung switch mismo? Nagtry ka na magpalit ng bago?
@@ThePs1111 yes. nag palit napo ako ng new switch yung spare na nasa box. hindi lang din un ang issue. pati alt at windows key nagpalit sila ng function. tas yung FN+ALT+F7 or F8 di gumagana
@@warrenhasley1106 aw. Kung ganun sir, mas mabuti kung pacheck nyo na yan sa expert. Kung under warranty pa siya, best kung contact nyo na yung seller.
SIr I have a problem with my rakk Ilis sometimes the key works well sometimes it stops working for a while and you need to press the key again for it to work. What should I do sir do I need to
replace the key?
Replace na yan chief. What i do is.. kung isa lang naman, i just swap it with a key na hindi ko masyado ginagamit like scroll lock or pause key. Pero kung marami na, bili ka na ng switches. Below is yung link kung san ako bumibili.
shopee.ph/product/203787783/3446159319?smtt=0.188845089-1612004504.9
You can moist it with lighter fluid. Remove the switch then use a cotton bud moist and clean the contact patch in the circuit. Let it dry for a few mins return the switch and key cap. Works like a charm most of the time
Kung gusto nyu ng high end switch na compatible sa outemo socket bili kayo ng akko cs switches
maraming salamat sa suggestion. try ko yan.
Hi sir, pano pag di magfunction ng tama when u replace it? Like yun number 1 pinindot mo ang haba ng lumalabas like 12345”””00000 ganun.
try mo tanggalin muna ulit yung replacement chief. pag nawala, switch yung prob. pag ganun pa rin, baka board na. possible rin na baka marumi lang.
Hi boss ask ko lang kung kaya ba mag mount ng ibang brand ng switches sa ilis?
Outemu lang chief. Meron ako nabasa sa mga FB groups, pinalitan niya ibang switch(not sure kung gateron or cherry). Pero may mga pinutol and niliha siya para magkasya.
I hate blue switches, too loud and too difficult to get rid of them. It’s absolutely a pain to extract them. 🤯
Have to admit. I liked them at first. But then I eventually switched to browns and akko's purple switches. 😂😂😂
parehas lang po ba ng outemo red the way pag tanggal nyo po ng blue switch? or is it soldered po yung outemo red? tried pullin it, ang tigas po talaga, ganyan din tuloy na damage yong front,.tnx po
Same chief. Pwede mo sila palitan from red to blue/brown outemus. Grabe lang talaga hirap tanggalin. Talagang pwede masira. Naisip ko nga, baka sinadya yung para ma-identify naten kung ano yung defective switch kapag magpapalit tayo.
@@ThePs1111 nice boss,.salamat ng marami boss,.
i had a total of 19 heart attacks thinking that I broke something
Same here the first time I tried replacig. Haha
Sir paano po malalaman kung anong layout ng keycaps at mag fit sa rakk ilis?
Ayan good question sir. Sa totoo lang mejo mahirap kasi based lang talaga sa tingin mo. lalo na sa mga online shopping apps. madalas kasi hindi talaga nakalagay ng maayos sa description yung dimensions ng caps. malalaman mo na lang based on reviews and sa itsura ng keycaps.
pero sa ilis and lam-ang, madalas ko tinitignan is yung middle part. yung "\" , enter, and shift key. kung complete yung details sa page nung seller, eto yung sizes ng ilis and lam-ang, para jan sa keys na yan.(kung hindi ako nagkakamali) hehe.
"\" = 1.5u
Enter = 2.5u
Shift = 3u
Then yung mga keys sa baba sa both ends ng spacebar (ctrl,win,alt,fn, etc.), puro 1.25u ang size niya.
Compatible ba yan sa rakk pluma sir?
yes sir. rakk pluma uses the same outemu switches.
Pwede ba boss na cherry red ang ipalit?
Outemu lang recommended chief. May mga nabasa ako na nagttry ng ibang switches pero may ginawa sila para magkasya. Either may puputulin or lilihain na pins para magkasya.
Hotswappable pala ilis sir? Sabi kasi ng iba di daw hotswappable ilis.
Pwede sir. As long as same switches lng gagamitin. In this case, puro outemu switches lng pwede. So if naka blue switch ka, pwede mo palitan ng red or brown switches.
Meron na rin nagsasabi na nakasubok na rin sila magpalit ng ibang brand ng switches. Subukan ko rin mag experiment then post ako bago video kung meron compatible akong nakita.
@@ThePs1111 Thank you po sir. Tsaka sa una lang po ba yung may masisirang switch? Once napalitan na lahat di na siya parang mahirap tanggalin na tipong may masisira pa ganun?
@@sajji8866 ganun pa rin kahit napalitan na sir. hehe. nasisira pa rin. mahirap pa rin tanggalin.
@@ThePs1111 Kailangan pala isang bagsakan mga binabalak na mod hahaha. Thank you sir!
Gaano na po katagal yung rakk ilis niyo po before nagkaroon ng problems sa switches??
after 3-4 months chief.
sir, sinunod ko naman to pero pasaway pa rin mga switches :( sobrang hirap tanggalin to the point na naputol ko na yung mismong plastic. hindi ko na alam paano tatanggalin yung switch. kaloka.
Nangyayari rin saken sir. Meron mga switch na kakaiba talaga yung pagkakalagay. Ayaw talaga magpatanggal. Dami ko na rin nasira. Minsan nga gusto ko nang lihain yung butas ng keyboard para lumaki ng konti.
@@ThePs1111 pagganun ba sir need ko na tanggalin sa pagkakascrew ung plate? kinakabahan akong pwersahin kasi
@@havendee6679 hindi ko marecommend yun kasi baka may madamay pang parts sir. Mas okay na yung masira yung switch sa pwersa kaysa yung buong plate or yung board.
@@ThePs1111 salamat ng marami sir, isipin ko na lang paano ko tatanggalin yung mga hindi ko mabunot na switches.
pwede ba din ba yan sa red switches na rakk ilis?
yes chief. pwede. mahirap lang talaga tanggalin.
@@ThePs1111 napaltan ko na yung W bro HAHAHAHA NASIRA DIN YUNG SWITCH KO SA PROCESS. THANKS SA TUTORIAL.
@@alfonsomiguelramos394 nyahaha. Pakahirap talaga nyan. Kahit anong ingat. Glad to know nakatulong kahit papano.
sir ano pong ibang compatible dito na switch sa rakk ilis pbt outemu red?
Hot swappable sya with other outemu switches chief. Havent tried using other switches like gateron. Pero may nabasa ako na you may need to modify other switches(other than outemu), to fit the plate.
akko cs switches po compatible sa outemo socket
sir paano ko po matatanggal yung switch if na putol na po yung parang white part niya ?😅
Try nyo po gamitan ng maliit na flat screwdriver as lever. Then ingatan nyo na lng po wag madamage yung ibang switch or magasgas yung board. Grabe po kasi talaga tigas nyan. Worst case, baklas plate.
Oo nga sobrang tigas, naputol din yung akin haha😅
Nahirapan din ako sa pagtanggal ng switch kaya napunta ako sa video na to haha. Pero nagtry ako na dun sa white part ng switch i hold yung puller, hold and pull. I find it easy pero di ko sure kung ok lang yun o baka mas makasama/ masira pa sa switch. Safe po kaya yun haha?
As long mapindot yung lock chief. Oks yun. Mas ok rin yung sa white part for me if possible. Matigas yun eh. Talagang yun prob ng karamihan. Kaya napabili ako ng extra switches para sigurado.
@@ThePs1111 Thank you Sir!!😁
Pwede pa link kung san mo na bili blue switch?
Eto chief:
shopee.ph/product/203787783/3446159319?smtt=0.188845089-1612142410.9
Hotswappable ba ang rakk ilis??
Hot swappable sya with other outemu switches chief. Havent tried using other switches like gateron. Pero may nabasa ako na you may need to modify other switches(other than outemu), to fit the plate.