Another idea could be to use eg. a tube of PVC, PE, aluminum etc. a little bit longer than the diamond rods so they could be stored inside the tube while having room for a plug in each end. The outside diameter could be the same size as the flat drill. Cap or plug each end with metal or wood. One end cap or - plug having two threaded holes for the threaded diamond rods. The other end with an eyelet to attach a lanyard. Drill a hole in a tree stump for usage or simply hold it in one hand and use the other to resharpen or hone your knife.
Hi Felix, another excellent video. You are a born teacher, and your enthusiasm is infectious. I always find your videos make me smile while I am learning. Thank you for the time you take to share your knowledge and skills 🙏
this is not good advice, it leads to rapid wear of the blade, rapid dulling and the need for frequent sharpening due to the wrong direction of sharpening
I like how you show these solutions and also include drawings and simple tricks. I think you could drill a storage hole in the base and store the rods there. That would make it more "on the go". To be honest I dod not know about these rods! Very good tip also for hand sharpening. Might require more attention but they can so easily be stored in a sheath or pocket. Good suff, as always!
Always interesting and helpful another reason I have to look forward to Fridays. I watched your video while eating my chicken of the woods I found this morning thank you.
Very cool idea. I already have some of those diamond rods somewhere in my tool shop. I have plenty of scrap wood, so I’m going to make your sharpening rig. Thanks !
That is an excellent idea! I've been mulling over how to design a packable sharpening rod jig. I like the idea of it being hinged. Edit: However, after trying to design and print different prototypes, it's more complicated than I hoped. I'll probably revert to a smaller fixed hole design without a hinge. Maybe you can design a more elegant hinged base for sharpening rods
Hallo Felix, deine Tipps werden immer besser! Eine längere Holzleiste, mit Bohrungen in verschiedenen Winkeln, mit Zwingen auf der Werkbank festgespannt und schon hat man ein unschlagbar günstiges Schärfsystem. LG Micha
At 2:34 your fingers are directly over 3 holes in the molle attachment. What are those holes for? Can they by modified to hold the diamond rods? Or, can 2 more holes be drilled directly in the molle attachment to hold the diamond rods? Maybe in the bridge?
If one makes a shorter thicker guide block with the correct angle. Then clamp it to the block your drilling. Then the drill bit can be held against the angle block and then drill the hole.
2:08 Can one generally say that wet wetstones take off more material than dry ones? I have once heard something similar, but im unsure. Awesome video as always!
I think that the water floats the metal particles out of the stone to keep it from clogging. That makes it cut the knife's steel better and holds the stone truer to its grit rating. I think I've seen that, as a stone gets loaded up, it actually begins, at some point, to act like a finer grit stone. If you ever use oil on a stone, you will never be able to get it to absorb water, later, so stick with water.
Actually, I think it applies to all stones, regardless of their composition, including the one that you might find laying on the ground and have to use 'cause it's all ya got.@@sosteve9113
Another of your very interesting engineering projects. There's no doubt the proper company can be contacted to injection mold the rod holders . Thanks for your video and all the best in all future endeavors.
Si señor muy buena opción me a gustado este sistema que has buscado de afilado 👌 sencillo y práctico como siempre gracias por compartir saludos amigo mío 🇪🇦😉
Wow. You are a genius, if you could tuck a small drill bit the width of the diamond files in the sheath, you could use the knife to split a branch to use instead of the block, throw in a laminated angle guide n u can do it anywhere
I like to clean my stones with Paradontax toothpaste. Works great. And, I have made a similar sharpening device with aluminium square rods, wich I wrapped in sandpaper. Worked great. And many diffrent grids available,,
Hallo Felix, hast du evtl. schon einmal darüber nachgedacht die kleinen Hölzchen auf dem 3D Drucker zu produzieren? Viele Grüße und mach weiter so Günter
How di they make that in the old times? I think you can do it with a sharpening stone. I'm not telling you are wrong, but when you have a knife and a some sort of stone that you sharpen your edge, you pick that! I'm not a fan of daggers, I prefer the knife, it's a great tool! And I think I can keep it sharp like my ancestors. I'm sure you can do it more effective with modern knowledge, but I love the old fashioned ways. Lots of love from Sweden!
Felix cut the Leather the same then cut 25mm strips of wet/dry paper any grit you need put 25mm double sided tape on the back of paper on smooth side of Leather wipe very clean stick paper to Leather simple and very lite weight
Felix, die Stäbe schauen aus als ob man da auch Schweißelektroden nehmen könnte. Wie hart wären die? Persönlich mag ich am liebsten billige Nagelfeilen aus dem Drogeriemarkt. Und zwar eine weiche mit 6 verschiedenen Körnungen, und auch die Schmalseite einer Glasfeile...
I just build mine with 2x 600 diamon rods, 2x 2000 diamon rods and a 3d printed part with 15° / 16,25° / 20°. And I cut one of my fingers ! 😂 It's really effiency !!!! 👍👏👏👏
It's the first thing I thought when I saw this video but on a second thinking I noticed this approach is not that good. The rods will screw in always a the same point so the sharpening surface will always be the same. With the Felix's approach each time the rods are inserted in a random position.
Hello sir I have a victorinox officer knife snd its plastic handle side is broken by me.. Can you send me one pair of plastic cover I did not found them in my country pakistan
@@FelixImmler Die Aliexpress Schleifstäbe passen ja zum Handbohrer ins Etui. Nun braucht es die beiden Korrundstäbe nicht mehr. Weg! Im frei gewordenen Fach kann der Holzsockel für die Aliexpressstäbe so zugeschnitten werden, dass er reinpasst. Ich sag mal: ein 12mm Vierkanntstab mit zwei schrägen (32.5’) Löchern . Keine Ahnung, vielleicht funktioniert es 😅
06:30 The Market Plattform "Temu" is in big critical discusion about a lot. Some Marketing tricks they are illegal in Germany, for example the countdown wich starts again after ending. Countdown is only legal, when you end the sale after the countdown got to zero. Additionaly were there some technik gadgeds with very bad electisity securety and faked certificates. the critical discusion was so big, that more youtubers made videos about it at the same time. And we have talked about it in School today. just wanna say, that the plattform is not a good one for a lot of people here (where i live)
@@FelixImmler I can totaly understand. I think i go to the marked in my city. I need new cloves all well. By the way, i am trying to make a costum own kydex sheet for my venture.
I like that the Playtime is 1337 any importan video shoud have that :-) Btw. this comment is for the Google AI xD (Great information about sharp objects and maintaince them)
Wenn ich es ansehe , einfach und klar wie Kloßbrühe, aber darauf wäre ich nicht gekommen. Deshalb, danke und danke für das Teilen nicht nur dieses Geistesblitz.
Are you talking about the product that Paul Harvey used to promote called "Barkeeper's Friend"? I use that all the time for other stuff, but will try it to clean my ceramic stones if that is the product you are alluding to. I currently use Ruby Red erasers.
@@mrhalfstep the powdery kind , like comet or bartenders keep , nothing expensive . It really cleans up the ceramic really good . I’ve been using the same ceramic rod for a few years .
I think I understand what you mean, I'm just not familiar with the term/brand "bartenders keep". Back in the day we generally called products like Comet or Ajax scouring powders. "Barkeepers Friend " is a specific scouring powder that I have found, over many years, to be superior the all the others on the market. I will try it on my ceramic rods and thanks for the tip.@@Hungrybird474
It is strictly forbidden to sharpen a knife by moving along (parallel) the blade. This is done only by moving perpendicular to the blade. At least at an acute angle.
Once again Felix, you have produced another great tutorial
thanks a lot for watching!
Another benefit of the piece of wood and the drill. You can glue a piece of leather on the other side and make a strop. Everything you need
perfect idea!!
Good thinking
Another idea could be to use eg. a tube of PVC, PE, aluminum etc. a little bit longer than the diamond rods so they could be stored inside the tube while having room for a plug in each end.
The outside diameter could be the same size as the flat drill.
Cap or plug each end with metal or wood.
One end cap or - plug having two threaded holes for the threaded diamond rods. The other end with an eyelet to attach a lanyard.
Drill a hole in a tree stump for usage or simply hold it in one hand and use the other to resharpen or hone your knife.
Génial comme d'habitude 👍
@@MrArray1967Look at the Lanskey sharpener on how 2 holes, another piece of wood and a screw can be used to make a storage system for the rods 😄
Simpel, effektiv und kostengünstig: Ein top Tool! Danke, Felix.
Danke Peter!
Hi Felix, another excellent video. You are a born teacher, and your enthusiasm is infectious. I always find your videos make me smile while I am learning. Thank you for the time you take to share your knowledge and skills 🙏
Thanks a lot for this wonderful compliment!
I 100% agree with this statement.
This video is timely. Such ingenuity is just as much needed to survive this changing modern world as it was 'back then'. Great coverage.
Thanks a. lot for your compliment!
Felix, you are a genius !
Love it that you use cheap budget saw power tools too !
Thank you very much!
Always learn something or see different ideas on your videos, Felix. Thank you for your work. Les in UK 🇬🇧
Thanks a lot for watching my videos!
You amaze me! Seeing how you stabilize the sharpening tool is simple and effective. Thanks again for more good tips and tricks!
Thank you very much!!
@@FelixImmler Always welcome, Felix!
@@FelixImmler I thank you for the time you take to make these videos to keep us so well informed
this is not good advice, it leads to rapid wear of the blade, rapid dulling and the need for frequent sharpening due to the wrong direction of sharpening
( I was taught to sharpen my knifes on a stone, it's the method it's done , and it works well , extremely well!)
Great info as always. I really like the simple but very effective design of this diamond sharpening system.
Outstanding Felix. Keep those great ideas coming. You are the MAN 💪💪💯
Thanks a lot Dave!
I like how you show these solutions and also include drawings and simple tricks.
I think you could drill a storage hole in the base and store the rods there. That would make it more "on the go".
To be honest I dod not know about these rods! Very good tip also for hand sharpening. Might require more attention but they can so easily be stored in a sheath or pocket.
Good suff, as always!
Thanks a lot brother!
ich liebe solche "einfach und nützlich" projekte 👍👍👍
That is is a great tip to make a knife sharpening jig. Thank you for the idea.👍
Thanks a lot for your comment my friend!
Thank you, I have become a fan of your videos...
That makes me happy!
Always interesting and helpful another reason I have to look forward to Fridays. I watched your video while eating my chicken of the woods I found this morning thank you.
Thanks for this interesting message 😅
@@FelixImmler chicken of the woods mushrooms.
Very cool idea. I already have some of those diamond rods somewhere in my tool shop. I have plenty of scrap wood, so I’m going to make your sharpening rig. Thanks !
Super...thank you!
this is not good advice due to the wrong direction of sharpening
Another excellent suggestion - I may make a hinged set, where the hinge can't go beyond the pre-set angle, and put them in my pack.
Super idea!
That is an excellent idea!
I've been mulling over how to design a packable sharpening rod jig. I like the idea of it being hinged.
Edit: However, after trying to design and print different prototypes, it's more complicated than I hoped. I'll probably revert to a smaller fixed hole design without a hinge. Maybe you can design a more elegant hinged base for sharpening rods
Wow real Swoss engeneering !! Genius!
As Seen On TV!!!
The new and improved instant bushcrafter cosplay kit!
Just in time for halloween!
Thanks for your comment!
Great and simple project Felix thanks for sharing
Thanks for watching dear Steve!
Great video Felix.
Как всегда-не дорого,просто и функционально 👍. Феликс,спасибо за видео 🤝
Hi Felix! Amazing video! Well done! Can you please make a video on how to make a shelter out of wood. Keep up the good work!
Eine tolle, einfache Sache um ein Messer im richtigen Winkel zu schleifen.👍 LG aus Wels!
Das stimmt 👍 Vielen Dank Willi
What a perfect teick ... 👍
Thank you very much!
Hallo Felix, deine Tipps werden immer besser! Eine längere Holzleiste, mit Bohrungen in verschiedenen Winkeln, mit Zwingen auf der Werkbank festgespannt und schon hat man ein unschlagbar günstiges Schärfsystem. LG Micha
Gute Idee 👍
...fein gemacht, gratuliere!!!😀
Vielen Dank!
Greetings Felix. Some times simple is the best way. Excellent video, thanks.
Thank you very much my friend!
Thanks Felix 💖💖💖
Thank you Felix. Very informative as usual. Have a great week end. See you next Friday.
Thank you very much!
At 2:34 your fingers are directly over 3 holes in the molle attachment. What are those holes for? Can they by modified to hold the diamond rods? Or, can 2 more holes be drilled directly in the molle attachment to hold the diamond rods? Maybe in the bridge?
They are to attach a Tek-Lok. Thanks for your inspiration
If one makes a shorter thicker guide block with the correct angle. Then clamp it to the block your drilling. Then the drill bit can be held against the angle block and then drill the hole.
Great job on the video 👍
Thank you very much!
2:08 Can one generally say that wet wetstones take off more material than dry ones? I have once heard something similar, but im unsure. Awesome video as always!
No... but you get a paste on the surface of the stone from water and grinding dust. This paste helps that you get a nice result.
I think that the water floats the metal particles out of the stone to keep it from clogging. That makes it cut the knife's steel better and holds the stone truer to its grit rating. I think I've seen that, as a stone gets loaded up, it actually begins, at some point, to act like a finer grit stone. If you ever use oil on a stone, you will never be able to get it to absorb water, later, so stick with water.
I think you mean the diamond sharpening stones,they intend to take more material of the blade,
If I remember correctly
Actually, I think it applies to all stones, regardless of their composition, including the one that you might find laying on the ground and have to use 'cause it's all ya got.@@sosteve9113
Bravo Felix 😁🏆
Thanks a lot!
Good video Felix, thanks for sharing, God bless my friend !
Thanks a lot dear Michael!
Thanks for the video Felix, you're always a great source of new tips and ideas.
Did you inspired from the Lansky portable box sharpener?
Danke Felix
Excellent, Thank You
Another of your very interesting engineering projects. There's no doubt the proper company can be contacted to injection mold the rod holders . Thanks for your video and all the best in all future endeavors.
Thank you so much for your kind comment!
Awesome as always , thanks for the great vids ⚔️⚔️⚔️⚔️⚔️⚔️👏👏👏👏👏👏👊
Thansk a lot for watching!!!
Si señor muy buena opción me a gustado este sistema que has buscado de afilado 👌 sencillo y práctico como siempre gracias por compartir saludos amigo mío 🇪🇦😉
¡Muchas gracias por el lindo comentario!
Как всегда отличное видео👍👍👍. Спасибо за совет, мне очень понравился и я сделаю себе такой🌸🌸🌸
Super... thanks a lot!
Omg very good.
Thanks you very much!
I love this! What a cool solution. What would happen if you positioned the rods closer or even slightly crossed? Then you could have a sharpening V.✌
I always want to have vertical movement when grinding. But Thanks for your idea
Awesome content! 👽
Thanks a lot for your compliment!
Looks like a great cheap system, I'm really noob with all of these , what angle would I need for a sak ? That's all I have for now , thanks
Genius!
Thanks a lot!
Excelente Informação! Obrigado.
Thank you very much!
😉👍Wie immer top....super Idee...🍀 und ich habe ne große Tormek gekauft....wärste mal früher mit der Idee um die Ecke gekommen😉
Haa ha haa, ja an die Performance einer Tormek kommen die Chinastäbchen nicht ganz 🤣🤣
Always interested! Great video thanks for sharing!!!
Thanks a lot Mike!
sharp
Yes...
Fantastic 👏👏👏👏👏
Thank you very much!
Wow. You are a genius, if you could tuck a small drill bit the width of the diamond files in the sheath, you could use the knife to split a branch to use instead of the block, throw in a laminated angle guide n u can do it anywhere
Thanks for your inspiration!
Victorinox called me asking for references for you and I gave them 👍👍😂
well done😂
Thanks for your videos! You are the best. A tip: You can use a Welding Electrodes (3-4mm diameters) also because of pressed stone containment 😉
Thanks a lot for this interesting tip!
this is not good advice due to the wrong direction of sharpening
works awesome
Thanks a lot!
i think some phones have a spirit level on them you could use that on your drilling table to get the correct angle
Yessssss, what a great idea!
Is this knife heat treated?
👋🔥✌️Hello, Felix. Thank's a lot 👍!!
Felix Du hasts einfach drauf!!!👍🏻👌🏻
Schöne Grüße ind S🇨🇭hwiz.
Dankeschön..liebe Grüsse zurück!
**BRILLIANT** !! 😊
Thank you very much!
Slick system.
Thanks a lot for your comment!
I like to clean my stones with Paradontax toothpaste. Works great.
And, I have made a similar sharpening device with aluminium square rods, wich I wrapped in sandpaper. Worked great. And many diffrent grids available,,
Thank you very much for your valuable inspirations!!!
You just made the 🕷️company and ws company obsolite and lit on🔥 in a single video. 🇨🇭
Danke❤Hallo a alli 🇨🇭
Dankä Oliver!
Brilliiant!
Thank you very much!
Hallo Felix,
hast du evtl. schon einmal darüber nachgedacht die kleinen Hölzchen auf dem 3D Drucker zu produzieren?
Viele Grüße und mach weiter so
Günter
Wowww, das ist eine geile Idee!!! Kannst Du das?
@@FelixImmler Gemäss der Skizze im Video, wie wärs damit: urlr.me/G27Rn
Already did it :)
Designs are posted on Printables@@FelixImmler @admindonk
Ich spreche kein Deutsch
I just uploaded the parts on Printables :)
Just updated the sharpening rod adapter model. I realized the 6mm hole should not be a through-hole.
Thanks Felix! Would this Venture sheath angle also work for standard 91mm SAK knives?
yes and no... the venture has 32.5° the SAK has 40°. But you can try to sharpen a sAK 32,5°. But you have to be careful with it.
Great ideas! I looked for these rods on Amazon in the US but did not find any. Can anyone link to some? TIA
I would google "diamond rod 6mm knive"
How di they make that in the old times? I think you can do it with a sharpening stone. I'm not telling you are wrong, but when you have a knife and a some sort of stone that you sharpen your edge, you pick that!
I'm not a fan of daggers, I prefer the knife, it's a great tool! And I think I can keep it sharp like my ancestors. I'm sure you can do it more effective with modern knowledge, but I love the old fashioned ways. Lots of love from Sweden!
Hello Martin. You are absolutely right! but they didn't had 59 Rockwell knives.
Hi, Felix!
The minus of Victorinox sharpening is that leaving scratches, it must be done very carefully. Waiting for the ventura.
You are right you have to be always carfull
Simplicity is what makes things work well for the average person.
I agree... thank you very much!
Felix cut the Leather the same then cut 25mm strips of wet/dry paper any grit you need put 25mm double sided tape on the back of paper on smooth side of Leather wipe very clean stick paper to Leather simple and very lite weight
Thanks a lot for your tip!
Felix, die Stäbe schauen aus als ob man da auch Schweißelektroden nehmen könnte. Wie hart wären die?
Persönlich mag ich am liebsten billige Nagelfeilen aus dem Drogeriemarkt.
Und zwar eine weiche mit 6 verschiedenen Körnungen, und auch die Schmalseite einer Glasfeile...
Genius
Thank you very much!
what's your advice to those (like me) who can't manage to keep the angle of the blade to the sharpening-device stable?
I recommend this system! Everyone can hold the knife more or less vertically.
i'll give it a try... luckily i have a "very used up" SAK08 in my posession that is in dire need of some TLC ;-)@@FelixImmler
I just build mine with 2x 600 diamon rods, 2x 2000 diamon rods and a 3d printed part with 15° / 16,25° / 20°. And I cut one of my fingers ! 😂
It's really effiency !!!! 👍👏👏👏
👍
Thanks a lot Ernst!
nice, but I don't think I can find a place for it in my survival kit - I appriciat it
👍👍👍
Thanks a lot!
I see someone 3D printing them little block adapters.
What a great idea!!!!!
😃
Thanks a lot Dennis!
классно
Wenn du die Stäbe aufeinanderliegend kreuzen lässt, brauchst du das Messer nur mittig durchziehen. Dies geht mit Augenmaß ganz gut.
Gruß Karl.
Ich möchte gegen die Scheide schärfen und nicht mit der Schneide wie bei einem Durchziehschärfer.
@@FelixImmler Verstehe, du bist Oppositionsschärfer. ;-)
I would prefer to get a slab of aluminum and drill and tap holes at the correct angle(s) to screw in the diamond rods.
Yes!! That's for sure a good idea!
It's the first thing I thought when I saw this video but on a second thinking I noticed this approach is not that good. The rods will screw in always a the same point so the sharpening surface will always be the same. With the Felix's approach each time the rods are inserted in a random position.
Watch your fingers making little diamond rod blocks on the belt sander Felix, 😱
Sorry for that 😂
16° is very little for a forest knife. Wouldn't 20° be better?
Hello sir
I have a victorinox officer knife snd its plastic handle side is broken by me..
Can you send me one pair of plastic cover
I did not found them in my country pakistan
Vielleicht können die beiden Korrund-Stäbe durch einen Holzstab ersetzt werden, welcher die beiden Bohrungen von 32.5 Grad aufweisen. 🤔
Sorry. ich checke deinen Vorschlag nicht...
@@FelixImmler
Die Aliexpress Schleifstäbe passen ja zum Handbohrer ins Etui. Nun braucht es die beiden Korrundstäbe nicht mehr. Weg! Im frei gewordenen Fach kann der Holzsockel für die Aliexpressstäbe so zugeschnitten werden, dass er reinpasst. Ich sag mal: ein 12mm Vierkanntstab mit zwei schrägen (32.5’) Löchern . Keine Ahnung, vielleicht funktioniert es 😅
06:30
The Market Plattform "Temu" is in big critical discusion about a lot. Some Marketing tricks they are illegal in Germany, for example the countdown wich starts again after ending.
Countdown is only legal, when you end the sale after the countdown got to zero. Additionaly were there some technik gadgeds with very bad electisity securety and faked certificates.
the critical discusion was so big, that more youtubers made videos about it at the same time. And we have talked about it in School today.
just wanna say, that the plattform is not a good one for a lot of people here (where i live)
Thanks a lot for your honest feedback! I am happy with the diamond sticks so far...
@@FelixImmler I can totaly understand.
I think i go to the marked in my city. I need new cloves all well. By the way, i am trying to make a costum own kydex sheet for my venture.
Says not available!
January 2024 Victorinox launch a new series!
👍🏼
Thank you very much!
I like that the Playtime is 1337 any importan video shoud have that :-)
Btw. this comment is for the Google AI xD
(Great information about sharp objects and maintaince them)
Of course, it's still only as accurate as your hand can keep it vertical.
Yes!
Wenn ich es ansehe , einfach und klar wie Kloßbrühe, aber darauf wäre ich nicht gekommen.
Deshalb, danke und danke für das Teilen nicht nur dieses Geistesblitz.
Dein Kommentar macht mich glücklich .. Danke!
Eraser or some bartenders keep cleans up ceramic or stones awesome 👏.
🤣👍
Are you talking about the product that Paul Harvey used to promote called "Barkeeper's Friend"? I use that all the time for other stuff, but will try it to clean my ceramic stones if that is the product you are alluding to. I currently use Ruby Red erasers.
@@mrhalfstep the powdery kind , like comet or bartenders keep , nothing expensive . It really cleans up the ceramic really good . I’ve been using the same ceramic rod for a few years .
I think I understand what you mean, I'm just not familiar with the term/brand "bartenders keep". Back in the day we generally called products like Comet or Ajax scouring powders. "Barkeepers Friend " is a specific scouring powder that I have found, over many years, to be superior the all the others on the market. I will try it on my ceramic rods and thanks for the tip.@@Hungrybird474
Как всегда очень полезно. Спасибо Феликс. Россия Санкт-Петербург смотрит.❤
Thanks a lot for watching!
It is strictly forbidden to sharpen a knife by moving along (parallel) the blade. This is done only by moving perpendicular to the blade. At least at an acute angle.
Thanks for your comment!