Terrific Video - thank you. As an FYI - I ended up buying the USB 2.0 Video Grabber (I have Windows 11). That USB audio/video was less than $20 via Amazon (vs. the $50 for the recommended I-O Data USB ) - they worked without issue (No separate driver download - Windows supported them).
Awesome! Thank you for your nice comment and watching! Please help support the channel by subscribing if you haven’t already.
4 місяці тому+2
Total neophyte here, taking this on as a newly retired guy so looking over the USB 2.0 Video Grabber listing on Amazon is daunting, perhaps you can share the one you used so I know it will work with my new Samsung Laptop with Windows 11 and no CD? Thank you
You helped me figure out a couple of things I could not find in other UA-cam videos. I own a Dazzle video capture. I had to do a bit of Googling to find how to capture the sound. I now can convert my old 8mm tapes to my computer. Thanks!
@@TheMediaNerdMT I did subscribe. The only issue I see is that I have the interlacing lines still. Do you have them when you used the GVU video capture? I have the Dazzle video capture.
If you are using the OBS software, go to your sources window and right click on video capture devise. The go to deinterlacing. at the bottom of the list, you can choose from "Top field First" or bottom field first". Chose which ever one that is not already checked. That may fix your issue. Also, in the deinterlacing tab, make sure that you have Yadif 2x selected. That will also remove the lines. While still in that window, double left click on the video capture devise and go to Configure video. Make sure that "WEAVE" is selected under the Vid deinterlace method section. I did another video for capturing VHS tapes using the OBS which I explain these settings. Thanks for subscribing! Let me know if this all works.
The sound should be there automatically as long as you followed my instructions. You may need to check your cables. Try swapping out your RCA cable with another one.@@mariavaughan
Great detail and instruction. Followed all setup and have been able to get 8mm tape across to computer file but the end file video is not smooth like the original - movements are jerky. I tried several output settings without any change. Can you advise how to correct. Thanks.
There is a setting for even fields and odd fields. Right click on the video capture devise in the source window then click on Deinterlacing. Under that I selected Yadif 2x. You can also select top field first or bottom field first. Try one of those two to see what results you get. Good luck.
Thanks for your response & suggestion. The original setting was the top field 1st so I tried the bottom and there was no change. During recording both camera & computer appear the same, but on playback the movements are not smooth, appear jerky. I played the camera beside the recorded computer file and the difference is obvious. Any other thoughts would be appreciated. I have a number of tapes to do dating from mid 80’s to about 2005…
I am using Final Cut X. For screen capture I use either QuickTime when I’m in a Mac or wondershare on the pc. I simply reduce the size of my face and crop it layering over top of the main video. I do shoot both at the same time and sync it up
Thanks a million, i was really looking the way for the same camera to transform the tape to a digital copy on the PC My question, please, on the step of recording, the out-side sounds are included on the registered video, how can I adjust this problem? Tgank you in advance.
If you have an external microphone plugged into your computer, unplug it. If you have a microphone that is part of your monitor, disable it in the computer settings. Also, in the software settings, check the audio inputs. Disable the microphone input
I need your assistance please. After carefully following your examples and settings while using the same products, I did a 20 minute test recording. The recording came out ok but with one rather huge problem. The MP4 file was around 7 gig for a 20 minute file. If I wanted to put these one dvd's I should be able to fit 2 hours of recordings. But 7 gig is about 3-4 times bigger than the file should have been. I stayed up all night watching your video over and over and then going to other videos looking for something maybe that wasn't shared in your video. I had no luck. Any suggestions you can provide would be much appreciated...
You are going to have to do a google search to see who develops film unless you can get a developing kit off of amazon. Once that you have it developed, you can use a transfer machine like the Kodak Reels. I do like the Kodak Reels over the other 8mm transfer machines. However, if you are shooting super8 with sound, you won't be able to use the Kodak Reels. You can check out my video on the Kodak Reels to see what you think. Best of luck and keep me posted! Don't forget to hit that subscribe button to help support the channel.
I have a Sony DCR-TRV350 - do you know what cable would be best to connect to a laptop? I have all Hi8 tapes to transfer. read elsewhere that SVideo is the better choice than DV/iLink cable - does the miniUSB to USB work to transfer to computer? cant wait to connect and try your process - seems pretty nice!
The firewire is the best out of all of them but I have only used the RCA cables. The svideo cable is better than the RCA however, there is a setting in OBS that you need to use in order to get the video picture. I don't know off hand where that setting is but you will need to use it. I really think that using the RCA works just fine. You really won't see a quality difference between the RCA and the S-Video.
Thanks - this device doesn’t have the RCA out jacks or I’d just do like you did. I think I’ve lost the Svideo cable that came with it so will look for a FireWire
I use my Mac and Final Cut Pro 7. The video is captured using Firewire. Once it is captured, it is a .mov file which is extremely large. I then put it through wondershare converter to make it a mp4 file. It reduces the size significantly while maintaining a good image.
The Cloner is a stand alone, no computer needed, the OBS with the I-O data uses a computer. If you just want to go straight to USB, then the cloner is the way to go. If you want to make video adjustments then the I-O is good. Thank you for giving me the idea of doing a comparison between the two. Comments like yours helps me with video content ideas!
Yeah, there are a few settings to go through but once you do it a couple of times you get the hang of it. Cloner Alliance is another way to convert video and you don't need a PC and it is easier. I made a video you can check out.
A free program called VirtualDub is much simpler. It’s only meant for video capture and encoding, not streaming. You still need to learn a few things, but it’s much easier than this.
Hi! Thank you for this video! During minute 7 you mention choosing PAL50 for Europe. Is that if the original 8mm is PAL? The tapes I’m wanting to digitize are PAL,and I’m in the U.S. now and want to watch the content on my TV here. In that case, do I choose PAL 50? Thank you!
You would need a pal player and then you’d be digitizing them in a pal format. To get them in a ntsc format you will need to convert them. I do have a video that shows how to convert pal to ntsc. Also if you do have a pal player and you do digitizing them there should be a software program that can convert pal to ntsc. Hope this helps.
I have the actual video camera that the tapes were recorded on, and could possibly play the video on there. I probably need a new battery and charger, but I think I could get it to work.
Good luck! I am sure that there is a software program that can do the conversion for you. Mac had a program called compressor that could do it and that was a decade ago.
I've used OBS for a couple months now but it never captured the audio, now that I fixed that problem yesterday, for some reason it isn't capturing my video anymore. I've been trying to figure this out all night yesterday and still no luck. It says the source is inactive and the blue screen isnt popping up at all anymore. I don't know what to do, its been really frustrating. Do you have any tips?
I downloaded the driver as my laptop doesn't have a cd player. There are two buttons for installing it; one I can't read, and the other includes "light capture." Do you know which I should select?
Any idea how to fix audio desync? I find that after about 20 minutes it's noticeably off and at the end of a 2 hour recording there's about a 2 second sync delay.
Here is a link for RCA cables. Amazons most popular with high ratings. I don't think there is much of a difference when it comes to RCA cables. amzn.to/3te577z
Terrific Video - thank you. As an FYI - I ended up buying the USB 2.0 Video Grabber (I have Windows 11). That USB audio/video was less than $20 via Amazon (vs. the $50 for the recommended I-O Data USB ) - they worked without issue (No separate driver download - Windows supported them).
Awesome! Thank you for your nice comment and watching! Please help support the channel by subscribing if you haven’t already.
Total neophyte here, taking this on as a newly retired guy so looking over the USB 2.0 Video Grabber listing on Amazon is daunting, perhaps you can share the one you used so I know it will work with my new Samsung Laptop with Windows 11 and no CD?
Thank you
You helped me figure out a couple of things I could not find in other UA-cam videos. I own a Dazzle video capture. I had to do a bit of Googling to find how to capture the sound. I now can convert my old 8mm tapes to my computer. Thanks!
Glad I could help! Please help me by hitting that subscribe button to support the channel! I’d greatly appreciate it!
@@TheMediaNerdMT I did subscribe. The only issue I see is that I have the interlacing lines still. Do you have them when you used the GVU video capture? I have the Dazzle video capture.
If you are using the OBS software, go to your sources window and right click on video capture devise. The go to deinterlacing. at the bottom of the list, you can choose from "Top field First" or bottom field first". Chose which ever one that is not already checked. That may fix your issue. Also, in the deinterlacing tab, make sure that you have Yadif 2x selected. That will also remove the lines. While still in that window, double left click on the video capture devise and go to Configure video. Make sure that "WEAVE" is selected under the Vid deinterlace method section. I did another video for capturing VHS tapes using the OBS which I explain these settings. Thanks for subscribing! Let me know if this all works.
hi! how did you capture the sound? i have the same problem with the dazzle. thanks
The sound should be there automatically as long as you followed my instructions. You may need to check your cables. Try swapping out your RCA cable with another one.@@mariavaughan
just got my camera today, cant wait to start recording!
Good luck!
Hi. Great explanation. Can I ask, is the quality from 8mm digital tapes as good when they are transferred to the PC?
It depends on your capture settings
Great detail and instruction. Followed all setup and have been able to get 8mm tape across to computer file but the end file video is not smooth like the original - movements are jerky. I tried several output settings without any change. Can you advise how to correct. Thanks.
There is a setting for even fields and odd fields. Right click on the video capture devise in the source window then click on Deinterlacing. Under that I selected Yadif 2x. You can also select top field first or bottom field first. Try one of those two to see what results you get. Good luck.
Thanks for your response & suggestion. The original setting was the top field 1st so I tried the bottom and there was no change. During recording both camera & computer appear the same, but on playback the movements are not smooth, appear jerky. I played the camera beside the recorded computer file and the difference is obvious. Any other thoughts would be appreciated. I have a number of tapes to do dating from mid 80’s to about 2005…
What are you using to make a video picture in picture?
Any help would be great.
Thanks
I am using Final Cut X. For screen capture I use either QuickTime when I’m in a Mac or wondershare on the pc. I simply reduce the size of my face and crop it layering over top of the main video. I do shoot both at the same time and sync it up
@@TheMediaNerdMT thanks great videos
@speakeasyarchives8764 thank you!
Thanks a million, i was really looking the way for the same camera to transform the tape to a digital copy on the PC
My question, please, on the step of recording, the out-side sounds are included on the registered video, how can I adjust this problem?
Tgank you in advance.
If you have an external microphone plugged into your computer, unplug it. If you have a microphone that is part of your monitor, disable it in the computer settings. Also, in the software settings, check the audio inputs. Disable the microphone input
I need your assistance please. After carefully following your examples and settings while using the same products, I did a 20 minute test recording. The recording came out ok but with one rather huge problem. The MP4 file was around 7 gig for a 20 minute file. If I wanted to put these one dvd's I should be able to fit 2 hours of recordings. But 7 gig is about 3-4 times bigger than the file should have been. I stayed up all night watching your video over and over and then going to other videos looking for something maybe that wasn't shared in your video. I had no luck. Any suggestions you can provide would be much appreciated...
I’m not an expert, but maybe if you lower the quality of the videos (using OBS recording settings) it would take less space on your drive.
I agree with @saadalmana2015. Try lowering the quality in the OBS settings.
Try MKV... should be a 2-3GB for 2 hours of video
Can you edit the video with the OBS software once it has been downloaded?
No, OBS does not an editor. It is for capturing and streaming video.
i’ve got a canon 814xl and want to know what i’d need to be able to film on it and get it over to my pc afterwards… any advice?
You are going to have to do a google search to see who develops film unless you can get a developing kit off of amazon. Once that you have it developed, you can use a transfer machine like the Kodak Reels. I do like the Kodak Reels over the other 8mm transfer machines. However, if you are shooting super8 with sound, you won't be able to use the Kodak Reels. You can check out my video on the Kodak Reels to see what you think. Best of luck and keep me posted! Don't forget to hit that subscribe button to help support the channel.
@@TheMediaNerdMT was thinking of using a vcr to hdmi cable and running it through that way i don’t know how bad of an idea that would be though
What would you be running through the VCR?
@@TheMediaNerdMT a vhs-c tape in the vcr with a rca and hdmi cable with the vcr
@PrinceTobiYT good luck
Where to get the camera from? I have many tapes that need to be digitalised
I have all of the link information in the description of the video. Here is a direct link to the camera on amazon. amzn.to/3ucFPqh
The link for the RCA cables does not look like the one you use in the video. Am I seeing this incorrectly?
Sorry. I fixed it. Here is the correct cable link. amzn.to/4ew5hK0
I have a Sony DCR-TRV350 - do you know what cable would be best to connect to a laptop? I have all Hi8 tapes to transfer. read elsewhere that SVideo is the better choice than DV/iLink cable - does the miniUSB to USB work to transfer to computer? cant wait to connect and try your process - seems pretty nice!
The firewire is the best out of all of them but I have only used the RCA cables. The svideo cable is better than the RCA however, there is a setting in OBS that you need to use in order to get the video picture. I don't know off hand where that setting is but you will need to use it. I really think that using the RCA works just fine. You really won't see a quality difference between the RCA and the S-Video.
Thanks - this device doesn’t have the RCA out jacks or I’d just do like you did. I think I’ve lost the Svideo cable that came with it so will look for a FireWire
It does have RCA jack. I have the same model. You are looking for an 8th inch port like a head phone jack. It is between the s video and dv jack.
Sorry - I must have jumped ahead and missed that. I see exactly on your video - thanks
Curious: what process do you use when you're transferring video for a customer?
I use my Mac and Final Cut Pro 7. The video is captured using Firewire. Once it is captured, it is a .mov file which is extremely large. I then put it through wondershare converter to make it a mp4 file. It reduces the size significantly while maintaining a good image.
@@TheMediaNerdMT Thanks!
Is this a better device than the one you made a video on a few weeks ago? Or just different?
Same devise and software, just different media.
I think the last one I saw was the Cloner device. I'm still pondering what one to buy
The Cloner is a stand alone, no computer needed, the OBS with the I-O data uses a computer. If you just want to go straight to USB, then the cloner is the way to go. If you want to make video adjustments then the I-O is good. Thank you for giving me the idea of doing a comparison between the two. Comments like yours helps me with video content ideas!
Thanks mate
Sure thing! Thanks for watching!
Wow. Surely there must be an easier way? Got 3/4 of the way through that and ended up with a headache.
Yeah, there are a few settings to go through but once you do it a couple of times you get the hang of it. Cloner Alliance is another way to convert video and you don't need a PC and it is easier. I made a video you can check out.
A free program called VirtualDub is much simpler. It’s only meant for video capture and encoding, not streaming. You still need to learn a few things, but it’s much easier than this.
Hi! Thank you for this video! During minute 7 you mention choosing PAL50 for Europe. Is that if the original 8mm is PAL? The tapes I’m wanting to digitize are PAL,and I’m in the U.S. now and want to watch the content on my TV here. In that case, do I choose PAL 50? Thank you!
You would need a pal player and then you’d be digitizing them in a pal format. To get them in a ntsc format you will need to convert them. I do have a video that shows how to convert pal to ntsc. Also if you do have a pal player and you do digitizing them there should be a software program that can convert pal to ntsc. Hope this helps.
I have the actual video camera that the tapes were recorded on, and could possibly play the video on there. I probably need a new battery and charger, but I think I could get it to work.
Good luck! I am sure that there is a software program that can do the conversion for you. Mac had a program called compressor that could do it and that was a decade ago.
I've used OBS for a couple months now but it never captured the audio, now that I fixed that problem yesterday, for some reason it isn't capturing my video anymore. I've been trying to figure this out all night yesterday and still no luck. It says the source is inactive and the blue screen isnt popping up at all anymore. I don't know what to do, its been really frustrating. Do you have any tips?
I tried resetting and re-installing obs as well but it didn't work
I downloaded the driver as my laptop doesn't have a cd player. There are two buttons for installing it; one I can't read, and the other includes "light capture." Do you know which I should select?
Try them both to see what you get.
If I don't have the camera of if the camcorder's tape player broken?
Sorry, I don't understand your question.
Any idea how to fix audio desync? I find that after about 20 minutes it's noticeably off and at the end of a 2 hour recording there's about a 2 second sync delay.
Go to your audio settings on your camera and put it to 16 instead of 12
Do you have a link to the rca cable. I’m looking for a high quality one ?
Here is a link for RCA cables. Amazons most popular with high ratings. I don't think there is much of a difference when it comes to RCA cables. amzn.to/3te577z
I’ve found plenty of heavy-gauge AV cables at local thrift stores for just a couple bucks.
Thanks!
You bet! I figured it was about time I start showing how to do transfers using a PC!
Can you advise how to do it on Linux PC, eg Ubuntu 22.04 Linux ?
Thanks
Links would also be appreciatede
Sorry, I don't have a linux pc.
i paid for it!!! (i hate d-i-y).
DIY is not for everyone. That's why people do transfers for a living
exactly!!! (i agree in both of your points...i prefer to give my little money than getting bored of my life!!!) @@TheMediaNerdMT