I am a 66 year old woman and still consider myself a handywoman when it comes to fixing things around the house, your video is Brilliant! and helped me decide how to fix a stripped hole. Thank you so much for sharing your skills 😊😊
Dont hurry to use this "solution". It is weak. Instead, use dowels and woodglue, or fill the hole with epoxi and then drill and thread. I tested the baking soda and superglue mixture. It is not a durable one.
Sure, you could do this in a more proper way. But I think this is a quite nice demonstration of what super glue and baking power can accomplish in a pinch. It is applicable in many more situations
A lot of people commenting are missing the point of the video though. It's not intended as a "permanent solution", but a quick hack in the case you run out of dowels / epoxy to fill. He even demonstrates at which point does this "hack" fails, and where it works the best. And, solid wood ain't cheap. Not all people can afford those things and this is a perfectly good quick hack to make things usable in the mean time while the hardware store opens tomorrow or you get your next paycheck.
🤦♂ When was the last time you checked the price of CA glue? In general crazy expensive, dries out too fast as it is hard to keep the nozzle of the bottle 100% clean and with the time when not used the bottles always tend to crack. If you do not use it on a regular basis always buy the smallest amount that you can get as you will have to discard the rest of the bottle as well as your money. Even that is hard to do because the sizes one can obtain are ususally much larger then one needs.
Ich habe meist Kunststoffe mit Sekundenkleber und Natron repariert. Bei Holz nahm ich immer Leim und Späne. Das trocknet aber sehr lange. Oder kürzlich bei einem Dachfenster feines Holzmehl und Epoxy. Das härteste gut aus und hält wunderbar. Das brachte mir ein Tischler bei, der Fenster baut. Ich selbst bin Malerin und Lackiererin in Deutschland. Unser größtes Problem ist immer das nasse Wetter und Frost. Deswegen mag ich Epoxy so gerne. Für solche Dinge wie Möbel ist Deine Methode viel schneller. Sehr gute Idee! 👍🏻 😃 Ganz herzlichen Dank, gute Gesundheit für Dich und die Familie und viele herzliche Grüße aus Deutschland! 👋🏻😍🙏🏻
Ну, другую не сделать... Фанера и дерево не только дороже но и подвержена деформации на скручивание из-за влажности/солнца... МДФ слишком тяжёлая. Пластик - хрень собачья. Дерево лиственница - ценник космос, а самому делать гемор... В общем, ну такое =)
@@jemkerry1275 Дык то советская :D У меня Ветерок 8М на казанке, и снегоход БУРАН из СССР до сих пор работает. :D Да и в родительском доме кухня тоже живая... Но тут хз, может в принципе из-за педантичности и аккуратности.
Cool comparison video on the diffrent types of repair! Enjoyed watching the video, nice quality video. Here is one thing I learned on a UA-cam channel. When you predrill a hole it loses strength bond for screw to material. I know if you wanna keep it from surface split or easier screwing in. I would just make a drill mark then use a drill to power in the screw. Hope this helps.
Прикольно в ютубах , а в жизни эти крепления в 99% случаев на вертикальной стенке, и чтоб ее так положить и порошки изводить нужно пол кухни разобрать или полностью шкаф. По сему в жизни люди берут любую 2 компонентную холодную сварку, скатывают колбаской с головку ватной палочки и туды, в отверстие, пока вусмерть не затвердело вкручиваем саморез. Все!:))
Лучше эпоксидка с наполнителем нет. У себя так сделал с петлёй с доодчиком никаких проблем. Только предварительно сверлом на 2.5 просверлил и пэшошки. Насчёт наполнителя к эпоксидка. Сначала эпоксидка размещается как надо и потом мука цемент гипс подсыпается до момента когда становится пластелином и отверстия шпателем. Первые партии холодной сварки были отличные сейчас одна дрянь попадается поэтому эпоксидка.
Let’s remember some people who rent I have no control over what wood is used on the cabinets. With that being said renters probably don’t want to spend a lot of money repairing something so this is a great easy fix those situations.
I've been doing this for at least 30 years with sawdust and everyday wood glue. It is just as resilient and has the advantage that it can also be used when one wants to treat the wood to fill cracks and splitting. Important in such intances is to apply a drop of glue on the top when the hole is almost filled. Then sprinkle sawdust on it till it's overfilled (to allow for shrinkage). Let it harden and it can then be sanded and painted or stained. One sees little to no difference in most cases. With CA glue one will always see the difference.
Adding super glue to any powdered or chopped material (sawdust included) turns it darker. The saw dust technique works, but unless you are working with a dark wood to begin with you are definitely going to see the repair area.
Hola! Muy buena recomendación. La mezcla es bicarbonato de sodio y cianoacrilato. Reacciona y forma un polímero sólido. Una buena opción para solucionar detalles, gracias por esa información! 👍
Now I know how to attack these problems. Thanks so much! Great job!!! So many Negative Nancys in the comments section. Hey, just don’t thumbs up if you don’t like it NANCY!!!
Baking soda + CA glue makes a good filler, but it's quite brittle. If you want a better bond, use CA + baby powder. Seen that on Adam Savage Tested channel, and tried myself to modelling, and it's rock hard as epoxy.
@@graealex I always use epoxy for such things. However, i use this, in cases you need to fix something instantaneously, or you don't have epoxy on hand. Give it a go!
I googled the glue mentioned in the description, and it's superglue (cyanoacrylate adhesive). Much as expected, but the title is throughing people off.
Just remember folks it's an EXOTHERMIC reaction, different glue different temperature. And yes it can leave a nasty burn on any exposed skin. It will burn thru nylon and that will stick also. Avoid direct contact with skin, the fumes do NOT breathe in..... aside from the aforementioned things I've used it for minor automotive repairs, not recommended for exhaust system tho. Brilliant hack....
Baking soda attracts super glue because the crystals have this property. With a horizontal/vertical surface, you will have to apply several THIN layers of Baking Soda. You have to put a paper stopper so that the baking soda slides into the hole by gravity and does not fall down.
Yea, wood glue will be stronger than hardwood if it's applied properly. Well worth the extra drying/curing time knowing that you won't have to fix it again next week.
Молодцом,но было бы лучше подобную ДСП вообще не изготавливать и не применять. Как -- то пытался выкрутить ,в подобном месте, шуруп из антресоли , сделанной в Советское время и сломался шуруп,а на ДСП никаких повреждений! Тогда было качество,был и знак качества,предприятия стремились к его получению. Теперь господствует принцип --- people схавает !
Oh, wow! So many ways! I know to use a toothpick or a match as a first aid, nice to know the wire works too! Edit: actually, no, the wooden version works much worse than a wire, as far as I can compare from memory.
It's definitely super glue. Don't know why they call it "water bond", but I suspect it might be a regional product name or something of the like. You're 100% correct tho. This is an old trick to fix nuts and to a lesser extent, saddles on acoustic guitars. Works well for that tho.
China doesn't care about quality or durability,,,they did build a pretty good trojan horse ,although it to is destined to the trashcan Let's go brandon
Cotton, steel wool or baking soda with super glue or epoxy will work to fill small holes in solid material. The filler used depends on the application. The "trick" is to not remove any more material than necessary to fill the hole with material before it can dry. A rough irregular hole will hold filler better than a smooth drilled one.
Странно что так мало лайков при таком количестве просмотров.Да идея не нова,но подача материала супер.Лайк однозначно!
благодарю вас.😊👍
I am a 66 year old woman and still consider myself a handywoman when it comes to fixing things around the house, your video is Brilliant! and helped me decide how to fix a stripped hole. Thank you so much for sharing your skills 😊😊
this dude cuts lines of baking soda like a true professional
Dont hurry to use this "solution". It is weak. Instead, use dowels and woodglue, or fill the hole with epoxi and then drill and thread. I tested the baking soda and superglue mixture. It is not a durable one.
Or don’t buy stuff made of those fake wood boards
It's still a good fix for other stuff that needs building up though, but yeah I agree dowels would work mych better and a more permanent fix too
Sure, you could do this in a more proper way. But I think this is a quite nice demonstration of what super glue and baking power can accomplish in a pinch. It is applicable in many more situations
Solid wood...... Just use solid wood
@@useitwice heck yes
A lot of people commenting are missing the point of the video though. It's not intended as a "permanent solution", but a quick hack in the case you run out of dowels / epoxy to fill. He even demonstrates at which point does this "hack" fails, and where it works the best.
And, solid wood ain't cheap. Not all people can afford those things and this is a perfectly good quick hack to make things usable in the mean time while the hardware store opens tomorrow or you get your next paycheck.
🤦♂ When was the last time you checked the price of CA glue? In general crazy expensive, dries out too fast as it is hard to keep the nozzle of the bottle 100% clean and with the time when not used the bottles always tend to crack. If you do not use it on a regular basis always buy the smallest amount that you can get as you will have to discard the rest of the bottle as well as your money. Even that is hard to do because the sizes one can obtain are ususally much larger then one needs.
The question still remains, where is the water that you put in the title of the video
Почему водяная связка? Суперклей же.
Ich habe meist Kunststoffe mit Sekundenkleber und Natron repariert. Bei Holz nahm ich immer Leim und Späne. Das trocknet aber sehr lange. Oder kürzlich bei einem Dachfenster feines Holzmehl und Epoxy. Das härteste gut aus und hält wunderbar. Das brachte mir ein Tischler bei, der Fenster baut.
Ich selbst bin Malerin und Lackiererin in Deutschland. Unser größtes Problem ist immer das nasse Wetter und Frost. Deswegen mag ich Epoxy so gerne.
Für solche Dinge wie Möbel ist Deine Methode viel schneller. Sehr gute Idee! 👍🏻 😃
Ganz herzlichen Dank, gute Gesundheit für Dich und die Familie und viele herzliche Grüße aus Deutschland! 👋🏻😍🙏🏻
danke fürs zuschauen👍👍🤞
@@망치소리HammerSound Ich danke Dir! 🥰🙏🏻
Und ich freue mich auf mehr. 👍🏻😃👋🏻😇
Лишнее доказательство что конструкция из дсп это не мебель
Ну, другую не сделать...
Фанера и дерево не только дороже но и подвержена деформации на скручивание из-за влажности/солнца...
МДФ слишком тяжёлая. Пластик - хрень собачья.
Дерево лиственница - ценник космос, а самому делать гемор...
В общем, ну такое =)
Пилил болгаркой китайским диском советсую дсп от кухонной мебели....диск затупился.
@@jemkerry1275 Дык то советская :D
У меня Ветерок 8М на казанке, и снегоход БУРАН из СССР до сих пор работает. :D
Да и в родительском доме кухня тоже живая... Но тут хз, может в принципе из-за педантичности и аккуратности.
@@dmitriyanatol нет там были госты. На пластик спокойно попадала вода и ставили горячие сковородки... Дсп не разбухал и не вздувался.
Спасибо тебе, добрый человек за науку
It’s crazy how strong it is.great method thanks again for sharing
thank you for watching
В отверстие от шурупа заложить кусочек капрона(колготки) и нагреть шуруп и быстро вкрутить. Держится мертво. проверено.
Thank you
Я спички вставляю. Даже клея не надо. Держится много лет.
I enjoy watching your patient and informative, helpful tips. Well done!
thank you for watching👍👍
Cool comparison video on the diffrent types of repair!
Enjoyed watching the video, nice quality video.
Here is one thing I learned on a UA-cam channel. When you predrill a hole it loses strength bond for screw to material. I know if you wanna keep it from surface split or easier screwing in. I would just make a drill mark then use a drill to power in the screw. Hope this helps.
Прикольно в ютубах , а в жизни эти крепления в 99% случаев на вертикальной стенке, и чтоб ее так положить и порошки изводить нужно пол кухни разобрать или полностью шкаф. По сему в жизни люди берут любую 2 компонентную холодную сварку, скатывают колбаской с головку ватной палочки и туды, в отверстие, пока вусмерть не затвердело вкручиваем саморез. Все!:))
Да, , конечно, 99% вертикаль!
А посему спасибо за подсказку!!🙂
Лучше эпоксидка с наполнителем нет. У себя так сделал с петлёй с доодчиком никаких проблем. Только предварительно сверлом на 2.5 просверлил и пэшошки. Насчёт наполнителя к эпоксидка. Сначала эпоксидка размещается как надо и потом мука цемент гипс подсыпается до момента когда становится пластелином и отверстия шпателем. Первые партии холодной сварки были отличные сейчас одна дрянь попадается поэтому эпоксидка.
You’re cutting up that baking soda like a pro 🤨
Ong
Have you ever wondered who stumbled on this method. It’s such a strong way of doing it
Perfect timing to repair broken teak side table!! Thank you!!
Let’s remember some people who rent I have no control over what wood is used on the cabinets. With that being said renters probably don’t want to spend a lot of money repairing something so this is a great easy fix those situations.
Отлично! Это сода и супер клей!
Красавчик!!! Очень хорошо и сподручно 👍👍👍👍
нагель рулит)
благодарю вас
Молодец.Как идея рестоврации старой мебели так отлично.👍
Спасибо за просмотр
А что за жидкость, так и не понял?
유용한 정보 공유해줘서 고맙습니다
시청해 주셔서 감사합니다.
Пищевая сода + клей секундный цианакрилатный
I've been doing this for at least 30 years with sawdust and everyday wood glue. It is just as resilient and has the advantage that it can also be used when one wants to treat the wood to fill cracks and splitting. Important in such intances is to apply a drop of glue on the top when the hole is almost filled. Then sprinkle sawdust on it till it's overfilled (to allow for shrinkage). Let it harden and it can then be sanded and painted or stained. One sees little to no difference in most cases. With CA glue one will always see the difference.
Well,, especially when you mix in the dye powder! No amount of sanding is going to hide that.
Adding super glue to any powdered or chopped material (sawdust included) turns it darker. The saw dust technique works, but unless you are working with a dark wood to begin with you are definitely going to see the repair area.
Interesting & useful tips!👍
👍
Hola!
Muy buena recomendación.
La mezcla es bicarbonato de sodio y cianoacrilato. Reacciona y forma un polímero sólido. Una buena opción para solucionar detalles, gracias por esa información!
👍
Gracias por ver👍😊
Самый простой способ починить мебель из ДСП - не покупать никогда мебель из ДСП.
Ох,ты мл..ть богатый как аллигатор...
I’m agree with you Buddy. Жаксы идея )))))
Лучше железную сделать на заводе
Sodium bicarbonate and super glue is being used. I've repaired broken spectacles with this.
👍👍
Now I know how to attack these problems. Thanks so much! Great job!!!
So many Negative Nancys in the comments section. Hey, just don’t thumbs up if you don’t like it NANCY!!!
님 영상 본 후로 제 인생은 엑시아가 있기 전과 후로 나뉠 정도로..ㅋㅋㅋ 이제 그냥 필수품으로 자리했습니다.ㅋ 이번 영상도 감사합니다
👍👍😊
좋은 스킬 배워갑니다
별말씀을요😉👍
It’s crazy how perfect you’re lines are . Like you’ve done it before lmao
I see what you did there... 😏
Baking soda + CA glue makes a good filler, but it's quite brittle. If you want a better bond, use CA + baby powder. Seen that on Adam Savage Tested channel, and tried myself to modelling, and it's rock hard as epoxy.
Or just use epoxy I guess?
@@graealex I always use epoxy for such things. However, i use this, in cases you need to fix something instantaneously, or you don't have epoxy on hand. Give it a go!
That was brilliant 👍 I knew that stuff was strong but I never thought about using for the reasons you showed us. Thanks for sharing my friend.
thank you for watching
Very good idea thanks for sharing
Gracias por ver
Деревянный чëпик и клей ПВА и забудете до скончание самой мебели о таких проблемах.
That's not water. Super glue and baking soda does this.
😂 he probably put some in his eyes a while back now he thinks all liquid is water 😂😂😂
He wrote " water *bond* " 👍
Probably a European way to refer to super glue.
Think he is translating it from japanese/korean.
He has it right in the description...
Oh my god ...its the answer to chip board ...you are a genius 👏....
thank you for watching
Çok faydasını göreceğim bilgiler.
Teşekkürler. 👍👍👏👏👏👏
Some really great ideas! Thanks.
thank you for watching👍👍
Обалденная идея.Спасибо большое👍👍👍👍👍
꿀팁 감사합니다. 덕분에 바로 고쳤어요. ^^
도움이 되셨다니 다행입니다.
I googled the glue mentioned in the description, and it's superglue (cyanoacrylate adhesive).
Much as expected, but the title is throughing people off.
Just remember folks it's an EXOTHERMIC reaction, different glue different temperature. And yes it can leave a nasty burn on any exposed skin. It will burn thru nylon and that will stick also.
Avoid direct contact with skin, the fumes do NOT breathe in..... aside from the aforementioned things
I've used it for minor automotive repairs, not recommended for exhaust system tho.
Brilliant hack....
좋은 영상이 너무 많네요 !!
시청해 주셔서 감사합니다.
Holy gods, how have i hoped for a solutions like these! THANK YOU!
I can finally fix my tripod, yaaay!
*does victory dance*
🤣🤣👍👍
와 대박이에요. 쥐어뜯으니까 가루뭉태기는 안뜯어지고 모재가 뜯기는거 보니 적어도 mdf 같은 모재보다 튼튼하다는 증거군요.
역시 본드는 나무보다 튼튼하다 라고 생각하고 있었는데 ㅋㅋㅋ 그 응용력이란... 상상을 더 뛰어넘네요.
네 적어도 합판 보다는 튼튼 하네요😊 시청해 주셔서 감사합니다.
Excellent idea.
سلام استاد عزیز،بی نهایت زیبا و کارامد بود.ممنون از شما
Способ хороший, проверенный. Вот только мне надо выгрузить весь шкаф, позвать соседей чтобы его могли перевернуть ...
🤣🤣🤣
Лучше будет если в отверстие забить спички с клеем ПВА.
Неоднократно так делал.👍👍👍
Great insights!
👏👏👏👏👏From Brasil 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
Very impressed
ㅎㅎㅎㅎ
그냥 흰색으로 하는게 나났을거같내요.
잘 봤습니다.
주로 플라스틱 수리할때만 써봤는데 가구수리도 가능하갰군요.
Baking soda attracts super glue because the crystals have this property.
With a horizontal/vertical surface, you will have to apply several THIN layers of Baking Soda.
You have to put a paper stopper so that the baking soda slides into the hole by gravity and does not fall down.
천재 아닙니까? ^^ 한 수 배웁니다
천재의 반대일 수도 있습니다.🤣
Thanks. Very helpful!
Muy buen producto 👌
완전 신박한 아이템이네요^^
You or someone else is very smart thanks USA.
사기꾼과 가짜뉴스로 넘쳐나는 유툽의 순기능 또다른 배움에 감사 드립니다.
It’s CA glue. It comes in different viscosities, thin medium and thick (gel).
I usually use saw dust mixed with wood glue or no nails adhesive..
Yea, wood glue will be stronger than hardwood if it's applied properly. Well worth the extra drying/curing time knowing that you won't have to fix it again next week.
What a clever idea.
👍
Молодцом,но было бы лучше подобную ДСП вообще не изготавливать и не применять. Как -- то пытался выкрутить ,в подобном месте, шуруп из антресоли , сделанной в Советское время и сломался шуруп,а на ДСП никаких повреждений! Тогда было качество,был и знак качества,предприятия стремились к его получению. Теперь господствует принцип --- people схавает !
Хорошо, больше такое ДСП изготавливать не будут. Спасибо за подсказку.
@@aleksandrkarpuhhin6786 И это радует !
Зеля вместо соды коксом клеит :)))
Тогда и при распиле ДВП ножовка сразу садилась, а сейчас одна пена из опилок
nice skill to learn :)
Ну вот это нормальные лайфхаки, вот эти методы действительно упрощают жизнь.
That's was very cool and interesting
Спасибо! Спасибо! Спасибо!
Super! Thanks your!!!
Цианокрилатный клей крепче без ускорителей затвердевания, но по мне это декоративный клей нежели приносящий практическую пользу.
Клей пва вперемешку с деревянной струшкой залить и будет надежней
Сода тоже хорошо держит
Oh, wow! So many ways! I know to use a toothpick or a match as a first aid, nice to know the wire works too!
Edit: actually, no, the wooden version works much worse than a wire, as far as I can compare from memory.
This kind of crafts are very popular in Colombia.
okay. Thank you for watching.
По поводу соды и супер клея гениально надо попробовать
👍😁
Соль 👍👍👍
@@Джокер-е2г сода
@@skapunkzzz не спорю. Соль тоже подходит.
Порошок протакрила с суперклеем- супер прочность.
I use J B weld on every thing broken let that stuff dry for a few days and you can drill it. I even used it on my bicycle forks .
😆 you are right! JB weld fixed my broken crank case on my 4wheeler..in "96! And it still doesn't leak
Гениально!
good idea
Wow, gonna save that one in the memory bank.
👍👍
Increíble como pega eso!! 👍
👍👍
Well, phooey. I misread the title & thought this would be a video on how to make snacks.
It's still a pretty cool video, though. Good practical idea.
I used Google Translate. I'll edit it.😆😆
Thank you!!!
👍 Super
Это если дырку в дверце надо восстановить. А если в шкафу, то придется его снять, чтобы положить горизонтально.
Good to know tips. Thanks
The toothpick and bamboo pin strengthened with superglue work good. Epoxy based materials need much longer time to harden.
Только не уточнили что водяная связка это цианопан))
Это цианоакрилат какой то?
@@_quietfox_ цианоакрилат это сам клей а "Цианопан" это марка,бренд или просто название на тюбике, хуй знает.
Косяки перевода ютуба же. В описании к видео указано, что за клей.
@@_quietfox_ Суперклей проще говоря
I don't think that's water, I suspect it's super glue.
It's definitely super glue. Don't know why they call it "water bond", but I suspect it might be a regional product name or something of the like. You're 100% correct tho. This is an old trick to fix nuts and to a lesser extent, saddles on acoustic guitars. Works well for that tho.
Most super glue hardens through a chemical reaction with water/moisture, perhaps that's the idea behind the name
Muy bueno sus video , minpregunta es que tipo de pegamento es el que usa .Muchas gracias por compartir sus conocimientos.Saludos desde Argentina.
Cyanoacrylate [super glue]
잘봤습니다 이런방법도있었내요
네 시청해주셔서 감사합니다.
정말 획기적인 방법같습니다 유용한 방법 잘 보았습니다 그런데 한가지 궁금한데요 응용 사용법이겠지만 영상속 싱크대 나사 부분이 몸체 부분이라 옆으로 되어있을 경우가 많을것같은데 파우더 사용시에 잘할수있는 방법이 있을지 여쭤봅니다
싱크대 옆면이라 조금 불편한 것은 맞습니다. 이해 하기 쉬운 설정이라 생각되어 영상 촬영 용 설정입니다.😂😂
실제 사용한다면 구멍에 파우더를 넣고 꾹꾹 눌러 앞축 시켜주면 그대로 유지 됩니다. 그런 다음 301을 뿌려주면 됩니다.
Would be nice if the furniture factories made those areas reinforced to begin with. Then you wouldn't need to fix it.
La durabilidad no es negocio para algunas empresas
China doesn't care about quality or durability,,,they did build a pretty good trojan horse ,although it to is destined to the trashcan
Let's go brandon
Cotton, steel wool or baking soda with super glue or epoxy will work to fill small holes in solid material. The filler used depends on the application. The "trick" is to not remove any more material than necessary to fill the hole with material before it can dry. A rough irregular hole will hold filler better than a smooth drilled one.
Thanks for the tips
This is what we use to repair tiny chips in helicopter blades.
youre-a-wizard ARRY!
А то супер клей это вода или я не понял где вода
Да он сам не понял про что снимал. 😅
any way to apploy this to vertical surfaces?