this is an installation video, not informational. Many of the things you ask are listed at the bottom of the page: www.altaros.cz/cs/ceska-zbrojovka/145-10112-cz-200s-regulator-tlaku.html#/69-awpdetails-
You make it look so easy, but in reality it is quite hard , the brass end is a pig to get off if it hasn't been off before, tell people this . Go to outher places on u tube to see it done properly!!!!!!!
This video is about 6 years old since youtube deleted our account for no reason, it is uploaded again. In the old video was a description of how to unscrew the plug. The new settings for youtube do not allow these labels. When you look at our products on our website you will find a tool for unscrewing plugs and a description of how to do the unscrewing a airtube plug.
Already had the lanes Reg and quick fill gauge but just got your ali air tube , you could make one for a AA s200 with the outside reg and Q/F gauge .I know you do a longer one ,but to long for a silencer to be fit aswel . I like the weight of the ali tube.
@@ChupaChoddy On brass plug is M25x1 (thread for connection between valve plug and airtube) and M16x1,5 for connection between airtube and airgun body.
An almost perfect video, but only thing missing was shooting it into a paper target, and pellets used, AND the FPS, FPE, and shot count!:-) :-)
this is an installation video, not informational. Many of the things you ask are listed at the bottom of the page:
www.altaros.cz/cs/ceska-zbrojovka/145-10112-cz-200s-regulator-tlaku.html#/69-awpdetails-
You make it look so easy, but in reality it is quite hard , the brass end is a pig to get off if it hasn't been off before, tell people this . Go to outher places on u tube to see it done properly!!!!!!!
This video is about 6 years old since youtube deleted our account for no reason, it is uploaded again. In the old video was a description of how to unscrew the plug. The new settings for youtube do not allow these labels. When you look at our products on our website you will find a tool for unscrewing plugs and a description of how to do the unscrewing a airtube plug.
Already had the lanes Reg and quick fill gauge but just got your ali air tube , you could make one for a AA s200 with the outside reg and Q/F gauge .I know you do a longer one ,but to long for a silencer to be fit aswel . I like the weight of the ali tube.
I'm after this kit can I get a link or youtube balls it
How can you tell me what is the thread size. The out side thread where the tube go in to. 🙏🙏
M11x1 its on brass screw. M25x1 its on airtube.
Thanks..
But I was talking about the brass and whre the air Tube go in to part no CZ083.. . Not the whare the regulator go in . 🙏🙏🙏
@@ChupaChoddy On brass plug is M25x1 (thread for connection between valve plug and airtube) and M16x1,5 for connection between airtube and airgun body.
Thank you very much sir for the information... 🙏🙏👍👍👍👍