3D Printed Juggernaut Figure
Вставка
- Опубліковано 11 вер 2018
- Hi guys its been a while since my last upload but I've been working on a my makerspace so I had to put 3D printing on hold for 3 months but I'm back with a awesome model of the juggernaut 3D printed on my wanhao D5S in 3d print works Elefilament PLA 2.85mm Filament and then airbrushed with Vallejo model air paints.
Follow me on Instagram
/ filament_forge
Myminifactory 10% discount code [ FILAMENT_FORGE2018 ]
I would like to thank Eduardas Lukosiunas for sharing this fantastic model here's a link to the STL file
www.thingiverse.com/thing:272...
skin: Base coat skin tone 71.076 pre shading medium skin tone and then blend the shading. final shading medium skin tone with two small drops of red and blend the shading.
body: chest and legs base coat Red terracotta 72.772 shading mix red terracotta with four drops of hull red 71.039 finish by blending the shading
body: stomach and boots base coat red then mix red 71.003 with four drops of hull red light shading then blend shading posca black pen for lines on stomach.
helmet arm bands: signal red metallic red 71.070 3 coats then gloss varnish.
MUSIC:
/ @nocopyrightsounds
Juggernaut is a fictional character appearing in American comic books published by Marvel Comics. The character, who first appeared in X-Men #12, was created by writer Stan Lee and artist/co-writer Jack Kirby. He is the stepbrother of Professor X. - Навчання та стиль
![3D Printed 15'' Hulk [Time-Lapse] AirBrush+Jeans | Now ARTFX Statue](http://i.ytimg.com/vi/X_s_vmWMToU/mqdefault.jpg)
Impressed. Such clean results for a filament print.
Those arms came out awesome! The whole juggernaut came out awesome!
Nice work! I love how shading looks when done with an airbrush.
So Sickkk and juggernaut is so underrated
Free Audio Books sic *kkk*
great job and Rafael is awesome
Wowza, looks awesome.
Awesome work bro! I love Juggernaut 👍
I am speechless, great work
Outstanding job! Great job with photography, background music and editing!
Learning as I go cheers
I LOVE IT, VERY NICE. THE JUGGERNAUT IS MY SECOND FAVORITE VILLAIN, AFTER MAGNETO.👊👍👍
This is night and day improvement from ur Hulk paintjob. Good work man, must have been practicing!
Thanks!...Ive been practicing a little bit there's some good airbrushing video's Ive been watching cheers
I absolutely love this and need one
Nice work. I might have gone a different route with the skin colors and helmet but I like it.
nice job!!!! looks great
I liked your channel so much, you are in no hurry to finish, you do not worry about the size of the video and it shows all the steps of the process, from the printing to the painting, channel that only shows timelepse has many out there, congratulations.
Oh, wow, this is great! Sucks that I didn't find this earlier
AWESOME WORK !!!
that was pretty awesome great job man!!
Beautiful figure !
Really love it
Amazing work!
Awesome video. I enioyed it. I usually watch Rafaels videos too.
me to
Fantastic!!
Convinced me to get one. So thank you.
This is way to go if you want a juggernaut statue I've never seen one under 600 bucks not even the one from Kotobukiya.
The kotobukiya statues are great but there's people that can 3d model the same figures for a lot less or even for free cheers
Excelente trabajo!! ✌😄✨
Fantastic job keep it up ... very nice..
Wish to see more builds from you, good work !
I'm trying to get more videos out but its hard sometimes with other commitments cheers
Great Job on the Video Filament Forge.
thanks pal
Amazing job!
Love your work,
This one of the best (if not the best) post processing job of a 3D printing I've seen. Incredible results! Looks like it was kind of those resin-like professional figurines.
Question though: why using wet sanding with soap instead of no soap?
thanks pal.... adding soap keeps the sandpaper cleaner add to a smoother finish cheers
Wow great job
This is pretty awesome man.
thanks pal just checked out your unboxing vids great stuff
So cool! I’m getting a 3D printer for Christmas! Awesome video!
Awesome have fun and good luck
Thanks man!
Rly good work !!!!!!!!!!
Nice work bro
So it's not even 6 am and like any man, there are days when I feel like I'm not doing enough in my life...like there's more work I should be getting done.
You inspired the shit out of me just now for working overtime to pay for the materials for your workspace, then building the workspace yourself with plans to expand, printing out the models and painting them yourself, quite efficiently too.
Most people would just work overtime at their job and say to hell with it, I'm tired and I'm watching netflix lmao keep hustling man 😎👍
thanks pal its good to have goals in life no matter how big or small the best thing we can do for each other is to inspire and motivate in life cheers
amazing job
As a heads up, if you print the legs section upside down (waist on the print bed) you could get away with no supports and have a perfectly flat surface to mate up to the abdomen piece. Great work as always!
Didn't think of that thanks pal
Cool content Bro
Your finishing is as always on point. Can't tell it's a print... really clean. For skin tone you can mix in some more blues and purples -- kinda approach it with what's under the skin -- it gives it more realism. Also mix in some dark tones into clothing, into the folds, and light tones into the higher edges -- kinda exaggerated, but would really make it pop. I paint 3D figures with the same approach I use to traditional painting -- that way it looks even more real. If that makes sense. Love the new shop -- congrats on the space!
Thanks for the tips pal I did make some mistakes with the skin tone but I've learnt from them Ive not been airbrushing long cheers
Your the new puppet master
Very cool. I've printed this file a few times(each time a bit bigger). You did the face really well, I always struggle in there. Kinda wish the helmet could be removable.
I did try and remove it in meshmixer but it didn't work I also found the face hard took me four time to get it right. thanks
Im going to buy a 3d printer and airbrush paint because of you you gave me lots of hope i will learn everything from your videos im so excited i want to escape work and go get me the printer the airbrush paint 😂💕
thanks I appreciate it glad I inspired you have fun and good luck cheers
I also thought the same way about a month ago... I hope you have a lot of patience and some spare cash, because it can certainly bring moments of frustration, and it's by no means cheap. I don't mean to put you off, but be prepared...
brilliant ie just started airbrushing ts harder than it looks lol..great job love it
It sure is I wouldn't mind taking some class to up my game cheers
Awesome! Greeting from Chile pal
Beautiful
Yeah Its The Juggernaut, B****! Seriously...Amazing work!
Awsome i subbed
Awesome
I can’t wait for the day I can afford to do this
Hi... Your works are just amazing... I'm a big fan of He-Man and the Masters of the universe. Could please 3d print He-Man and Skeletor action models. I would love to see that. Thanks 😊
l have put them on my to-do list cheers
🥰🥰🥰
Amazing! Wish I had your skills and could afford to buy myself a 3D printer 😝 Got yourself a new subscriber, look forward to your future vids!
thanks for the sub 3d printers aren't that expensive you could start with a low end one and see if you like it cheers
Lol, not sure my wife would be too happy if i blew $1,500 on a 3d printer just so I could print out some toy figures 🤣🤣 Btw, I hope you print and paint a female figure soon. Would love to see your take on a popular female anime character or video game character!
@@demonslayer8085 Most cities have "Maker Spaces" where you can rent/borrow a 3D Printer. If you're stuck in the boonies though you might not, but I've got friends who do it to get access to all sorts of cool gear that's too expensive to own.
There used to be places online that would print for you, but IIRC they were kind of pricey. Still for results like this it might be worth it.
I like it!!!
amazing
Fantastic job mate!! One tip, give it a wash with a dark tone to highlight more the shadow areas and the areas that connect various colors to achieve more depth and separation. Contrast colors more to get a better effect of shadows and highlights. But very well done, dude!!
I will keep that in mind cheers
Why is this guy only have 13k subs?
Awesome work!!! Can you tell us the specific tools you used for this video, completely Airbrush Equipment, 3D Printer Model and the cost of the material to make this Statue.
very good.
Great work. I might have missed it, but I wanted to ask the reason for going with a flat surface at the joints over some kind of connection pot and tab.
good question some models come with connection pots but this didn't I would of had to add them but I preferer flat surfaces just personal preference cheers
you gave me hope 😁
good job
Wow! nice work :) You have come a long way since your Hulk job with airbrushing. Was wondering where you have been, new place looks great.
Always trying to learn from my mistakes with the hulk the shading and blending weren't quite right. As for the new makerspace it's a slow project. Cheers
Awesome! That figure in the reference pic on your ipad is made by me (Loosecollector).
wow you did a fantastic job on that one the colours you used were great helped me out a lot thanks
Nice one again! I was worried about the tablet getting splattered.
It did a bit but the paint is water based so just wipes of
Bro, read carefuly.....YOU ARE AWESOME.
Hahaha nice one 👍👍
That impresora model is please ,is perfect work great my griend
About the primer you use, when applied it looks grey or transparent but when cured is yelowish? Or do you apply something else.
I should of said in the video the first grey primer is a high build primer which I ended up running out of so the second yellow primer was just a different brand cheers
Can you make the Castle GreySkull playset from the 80’s to scale
Brilliantly done I wonder who disliked it ? Haters maybe ?
you cant please everyone. cheers
i swear i heard the wilhelm scream for the crotch support removal in my head
great job please more videos!.... !!!!!!!!!
thanks I am trying to get more videos up cheers
I´ve some questions regarding 3D printers, and I hope someone in here could help me out
Can you print your own transformer or action figures with ANY 3D printer or do you need an especific type of printer?
What´s the best material to use if you want solid toys: ABS or PLA?
How solid is going to be the toy? Like Hasbro´s solid, like a Lego´s brick or is going to be like a really cheap plastic?
Do you need to sand the pieces or they´re already smooth as soon as they leave the print?
What´s the best software to use to create toys for 3D printing?
How durable is going to be the toy? Is going to break as soon as it hits the floor?
And what´s the best way to deal with tolerance´s issues?
any printer can print action figures but usually we don't print solid parts you add infill % the more infill the stronger the part but the longer it takes to print and usually you print two outer walls but you can increase it for stronger parts but once again it takes longer to print so you can achieve a Lego brick of strength or more as for smoothness it depends on your quality setting when you slice the model for printing some parts don't need sanding some do depends on what your after hope this helps cheers
thank you very much for the info!
Very Nice 👏👏👏
makes Venom
thanks bro
I've got one in the works
Nice.
Can you make figures with articulation such as the recent Marvel Legends Juggernaut if you print it piece by piece?
I cant it would have to be 3d modelled with articulated joints
Awesome build... the bands on the arms? Something looks off though... maybe just how it looks on video.
its the lighting its hard to not go to dark or light thanks
Try playing around with thin washes for skine tones (green red blue) skin has these tones if you look, you can get some great resuls
Thanks for the tip will look into that cheers
ua-cam.com/video/zWjuwZ0oM9g/v-deo.html this is vid that i saw, iv had some nice results when playing with this technique
This was amazing work as always question I was thinking of printing this myself in was wondering how you painted the eyes and teeth
the face was hard to do 4 times I messed it up first I airbrushed the skin tone to match the arms then with my smallest paint brush I did the teeth I mixed up white and a little bit of yellow then white for the eyes and then I used a posca pen for the pupils hope this helps
Thank you it is very helpful
How is your 3d print came smooth and clean after the actual print? I've seen some prints that has this line textures on it and needed to be smoothed with chemicals.
What airbrush and compressor do you use?
No offense, but YOU'RE AWESOME!!
2:51 That piece you snapped off just looks and sounds wrong 😂
Beautiful work! May I ask which slicer you use and what settings for the supports?
wanhaomaker for the wanhao d5s I don't think it works with other printers I selected full support
Filament Forge thank you, I had not heard of that one. But the supports looked very easy to remove.
Hi mate i want to ask somthing this sand paper is good for 3d printer Abrasive Dry Wet Waterproof Sandpaper Sheets Assorted Grit of 400/ 600/ 800/ 1000/ 1200/ 1500 for Furniture, Hobbies and Home Improvement (12 Sheets)??
I like to keep my wet&dry sandpaper separate from my courser non wet&dry sandpaper you should add 80, 120, 240, 600 normal sandpaper to you set as well, for cleaning up and smoothing pla what you have won't do much or you will be sanding for a long time I use higher grits to wet sand primer and paint hope this helps cheers
This is unreal. Great work. I also have a d5s but my results seem to vary. Can I ask are you using a heated bed with hair spray for your build plate? if not what do you use.
unheated glass bed with buildtak first bottom few layers no fan at about 20/30mms
What layer height did you print at? 30mms at a fine layer height. Would've taken weeks?
I watch ALL your videO !!!
And what AIRBRUSH you use ? please
i need buy it this week
Nothing fancy but does the job
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F332908603810
Where do you get the progams for the figure prints?
wanhaomaker for the wanhao d5s
NICE
Great job . What airbrush and compressor do you use? I'm starting painting 3D pieces and I'd like you to give me some advice. Thank you.
if you live in the uk you can find my compressor and airbrush on ebay as a starter kit its about £85 and paints I would recommend Vallejo air get some airbrush thinner and airbrush cleaner as well I didn't spend a lot on the airbrush because I'm not that advanced yet so I wouldn't spend a lot on a really expensive one they all do the same I would go with a gravity fed one plus there's some great UA-cam video on how to get started airbrushing here's one I watched ua-cam.com/video/Uk0oA0PctIA/v-deo.html
Thanks for answering.
very cool but you have to do this in outdoors!
How did you put the paint on veins?
I love
Love how this turned a real talent you have there 👍I love Airbrushing and figure painting in general Desperate to paint large scale figures like this, and want to buy a printer But the choice is overwhelming me Any suggestions please for a complete beginner ?
Wanhao i3Plus Duplicator; 3D Printer can i use this bro for this figure i like your work and i want to buy 3d print for best details what can i use ??
yes it will do but its got a bit of a small build volume just something to consider with printing bigger things
Hello how are you? I love your impressions in 3d, you can help me with a question I have about the filler that you use, isopon, what is the difference between the Isopon Plastic Bumper Filler Tin (16.3 Oz.) and the Isopon Filler for Minor Dents-QT Tin ( 2.0lbs), I'm thinking of starting to use it to improve my impressions in 3d, I really need your help before making a purchase. thanks and excellent channel.
hi.. there's not much difference in either of them plastic bumper filler is more flexible for heat expansion and the other one is good for metal parts you could use either one hope this helps
thanks a lot for your help... again excellent channel... cant wait for your next 3d print
What settings did you use to print this? So cleannnnnn
They were just the standard setting for the wanhao d5s Already programmed in I just set the layer height 0.1mm
How tall was the leg piece? want to see if I will need to adjust for my machine to handle it and this video got me started in 3d printing. A new habit to support.
Where do you find your print files for these figures?
link in the description above