Hi, we have the exact same motor and we got it running, it would idle perfect but as soon as you touch the throttle it just dies down, we Tryed to take the jets out but a socket won’t fit on the pilot jet, and the main jet needs a special screw driver because it has a little peace sticking up in the middle, any advice on how to get the jets out or make it go up in rpms
I have one and it will run for about 3 seconds and dies,,I have a new fuel pump , fresh gas and the carb is rebuilt and clean the bole is full all jet screws and internal areas are clean as can be, I have no idea why it still gives me fits.. its a K341.
I have a new fuel pump the float is full and the fuel is not getting into the engine ..I tore the carburetor apart and did a real good cleaning and is there another part that can stop the fuel from entering the combustion chamber? Is there a place I have missed?
@@keithsage7258 I had a K341, did you check it's spark and coil, or the points? Because that might be your main issue since you resolved your fuel delivery problems you might have.
This engine sold a few years ago..The video seems poplar so I left it posted..Thanks everyone for viewing !
I like!
Hi, does anyone know the specs of the crankshaft for this engine?
Not sure how you done it but this engine is running backwards.....
do yall have any extra heads laying around for that motor
I like kohler engine and BS engine. Where you live?
I like
Hi, we have the exact same motor and we got it running, it would idle perfect but as soon as you touch the throttle it just dies down, we Tryed to take the jets out but a socket won’t fit on the pilot jet, and the main jet needs a special screw driver because it has a little peace sticking up in the middle, any advice on how to get the jets out or make it go up in rpms
High speed jet goes right up the float bowl. I don't believe it is adjustable. A fouled spark plug will cause similar symptoms. A year late I know...
How much is that? Where to buy?
I have one and it will run for about 3 seconds and dies,,I have a new fuel pump , fresh gas and the carb is rebuilt and clean the bole is full all jet screws and internal areas are clean as can be, I have no idea why it still gives me fits.. its a K341.
Sounds like fuel adjustment
I have a new fuel pump the float is full and the fuel is not getting into the engine ..I tore the carburetor apart and did a real good cleaning and is there another part that can stop the fuel from entering the combustion chamber? Is there a place I have missed?
@@keithsage7258 I had a K341, did you check it's spark and coil, or the points? Because that might be your main issue since you resolved your fuel delivery problems you might have.
Keith Sage bet you got some clogged jets still
Jaka cena tego silnika
Tiene la misma capacidad de un motor de motosicleta me pued dar su número telefon
Is this engine still available..?
Sorry it's sold quite a while ago.
Dean