2011-2019 Ford Explorer Windshield Cowl Replacement and A Pillar cover bb5z78022a68-aa bb5z7803145ba
Вставка
- Опубліковано 18 чер 2023
- How to replace windshield cowl on 2011-2019 Ford Explorer and also the A pillar molding. Some of the links bellow help out the channel they are affiliate links and its possible for us to make a small commissions. Thank you
Ford Explorer Trim Molding A-Pillar Left 2011-2019 amzn.to/47NK9uZ
Ford Explorer Trim Molding A-Pillar Right 2011-2019 amzn.to/4779b7z
Ford Explorer Trim Molding A-Pillar Set 2011-2019 amzn.to/3TfSSlm
Wiper Blade Arm Puller Auto Remover Removal Tool amzn.to/3XfiAq4
3m Glasses Clear 1 amzn.to/3RaqcWu
3m Glasses Tinted Amazon 4pk amzn.to/3e0YqxK
Amazon Craftsman 48 Cabinet amzn.to/3BWJytS
Amazon Craftsman 41 Roller amzn.to/3BWMBCD
Amazon Craftsman 26 Roller amzn.to/3PdrEq2
Ironton Retractable Extension Cord amzn.to/3QXz2H9
Retractable Extension Cord 45 ft. amzn.to/3AB2Tje
BILITOOLS 1/2 inch Drive Impact Lug Nut Socket Set amzn.to/3GsU6mD
Homedepot.com
Homedepot Husky 6 ft. Workbench homedepot.sjv.io/15BkA6
Video Equipment
Sony ZV-1 Digital Camera w/ 32gb Bundle amzn.to/3TH1zCS
Rode Wireless Microphone Set of 2 amzn.to/3SMW8l2
GoPro HERO11 Black amzn.to/3WkUj0H
Rakuten Save Online www.rakuten.com/r/MARCOT531?e...
marcotarafa - Навчання та стиль
Great vid. Saves me $400+
Very welcome
Thanks for the help on this install
Greatly appreciated. thanks
Thank you so much, you did a great job.
Hello you are welcome. Thanks
Fantastic job. Thank you !
Hello you are welcome glad it helped
REALLY nice video! Thanks for sharing with us.
Hello you are very welcome. Glad it helped.
Thank you so much
Thanks for your help
Thanks
Very helpful thank you
You are welcome
Mush helped thanks
Thanks!
Thanks!
I have noticed misting more than usual after replacing the cowl. Is the cowl not to be glued or something? Because the original one used to stick very close to the windshield.
Yes, super glue it all around …
having trouble putting a cowl on the 2014 ford explorer xlt on the corner it wont snap in why
Hello I dont think the corners have a snap clip. make sure that all the main clips are pushed in. On the ends make sure the weather strip is over the cowl. Hope it helps. thank you
I am telling our Ford dealer they need to replace ours for free because of the NHTSA investigation into this.
Hello have you contacted them regarding this issue. Maybe there is one for this vehicle. Thanks
Let us know if it works. The (currently open) NHTSA investigation is specifically to address concerns that some of these cowls are breaking loose at highway speeds and hitting drivers following behind. I highly doubt it will address the poor quality of the flaky rubber they use at the windshield interface. These cowls are absolute trash. Same problem on my 2013 and 10 years later seeing zero design change from Ford. Smh.
Did that work?
Ford Just sent out recall notice for the pillars
Bottom cowling part number isnt listed in description. And help?
Hello Amazon doesnt have it listed any longer but here is the part number. bb5z78022a68-aa you might have to buy it at dealer locally or just put the part number online and sometimes you will find it at a good price but shipping can be pricy. thank you
What is the name of the rubber part that is attached to the panel. Min 9.25
Hello I have looked online for that part and no luck for me. I think you might have to visit the dealer so you can point it on their diagram. Sorry couldnt help on this one. thank you
what about the molding at the top of the windshield?
Hello we didnt replace that one this time.
Where did u get it at
Hello I got mine at the dealer. You can also put the part number online and will give you some options but sometimes shipping is high. Amazon did sell it at a good price but no longer available.
How much was it for the parts like 1k?
Hello about $300 for the windshield cowl check out the link. Thanks