12 F-350 Dome lights INOP!!!
Вставка
- Опубліковано 15 вер 2024
- Hey everyone welcome!!! This truck came in for a gravy lick, rolled in soakin it up with them yummy biscuit wheels. It obviously HAD, a lighting concern which I wanted to outline the diag and what one would have to go through to diagnose this issue. Hope all enjoyed. Give me a like & Sub!!! See you all next week!!!!
Check out my Instagram
@PTT_W_AROD
Music: "Shine" by Declan DP bit.ly/2HT70xF Attribution 3.0 Unported creativecommon.... Music promoted by Audio Library • Shine - Declan DP (No ...
I am the creator and owner of this material. It does not belong to; nor is affiliated with ANYONE, except for me, the owner and creator. Downloading is strictly forbidden. Contact me if you want my material, its that simple! The events, the characters & even the firms depicted in my photoplay are fictitious. Any similarity to actual events, persons living or dead or to that of actual entities are purely coincidental.
Thanks a ton. I had trouble shot all the previous stuff by reasonable deduction and didn't have a clue where to go when I ended up at the point at which it may have been a faulty bcm. I didn't know what else to trouble shoot. This confirms my exact symptom of my 2012. Thank you!!
Thanks for the video. I saved it to show the service manager at the dealership. They had my truck for two days and never even looked at it. Pissed off! The guy even had the balls to tell me that since I lived in the "country", a mouse probably chewed a wire.
Wow! Thanks 4 sharing
Awesome diagnosis bro. Young homie arod saving diesel trucks across the galaxy.
I love it bro!!!!
Thanks ARod. I cleared two codes and the dome light came back on. It’s probably short lived, but now I know that the BCM is most likely the problem.
Excellent diagnostic video. My 2012 F250 appears to have this issue. Bulbs are good, fuse is good, door open sensors work, and I can manually turn on the dome lights. No way that I will replace the BCM just to get the lights back.
As always very informative, great video, scary stuff all these newfangled electronic filled people movers! Thanks for doing these!!!
Dash does indicate when a door is open, so next step this week end. Thanks again for the video.
Wow that BCM is a son-of-a-gun when she fails. The reprograming is the part that stinks. My rear view camera in my Explorer needs to be replaced but then it will need to be reprogramed. GEEZ!! Great video Bro
My truck had less than 100 miles on it when the BCM had to be replaced because of this. Literally signed the papers on it and took it to the service department!
Great video!!
Bro you crushed it! Great video.
Gosh old asf too
@@PowerStrokeTechTalkwARod yeah my truck is but it runs great and has right over 100k on it… or did you mean the video? 😆
No the video
@@PowerStrokeTechTalkwARod I just have jokes that miss the mark. I assume that’s what you meant but I couldn’t help myself.
I have a 2012 f350 reg cab that has a similar problem. The only difference is I can manually turn them on by the switch. Do not work when you open the door.
I was changing all my interior bulbs and I shorted out the rear dome light because I used pliers to pop the bulb out...stupid. Every light still works properly besides the rear dome light which I shorted out. All my fuses are good, all the demand light switches work, all my door ajar messages are correct, and if I open the doors or hold the cluster brightness switch the front dome lights come on normally. Is it possible that I just ruined my rear dome light assembly?
Yikes, you could have shorted out the b. C. M, you better check those fuses again
Nice but is their a cheaper and easer alternative to replacing the BCM. like removing that wire and adding a relay. Which wire runs the door sensor
Thanks for the video. I had the BCM replaced by Ford about 3 years ago and the dome lights stopped coming on again about a year later. Haven’t fixed it again because it was $600ish and didn’t want to pay that again. Why would it have gone bad so soon after being replaced? 2012 F250
I dunno glad it went that long
Seems to be a common problem on that year. Mine is the same.
Another great VID Arod✌🏼💯
Thanks!! Very helpful!!
So my front dome light comes on when any door opens but rear does not come on. I can manually turn on each light in the rear and when pressing the dome light switch on dash only the fronts come on.
Might come off as what you may think is a simple problem, but actually there is quite a bit more to determining the root cause.
Tip of the hat young man,
-Adrenacyde
Ehh i cld see where your comin from but i beg to differ....have a grt8 weekend bub!!!
I have same problem but my dimmer switch won’t dim lighting on dash and my dome lite don’t work when open door but map lights work
Thank you for this info. Mine has been doing this and I have done everything to pin point it and now I know
Awesome! Glad to have helped, thank u 4 your service 🇺🇲
Good video. As always.
So all the fuses and relays come with the new BCM??? interesting video. Thanx. This is getting crazy. TOOOOOO many failure points for trivial things. Might have to get a Ford. That troubleshooting guide is great.
my 2014 doesnt look like that f12 is one up connector not the same is wiring the same at cinnector
Mine is doing the opposite turns on when i open the door but doesnt when i click the button
....that might not be a BCM. We'd have to look at it to confirm
I cleared the code with a Snap On scanner and so far the lights are working.
Good video thanks for the details in what to look for. Thanks
Will this problem also cause sun visors and glove box lamp to not turn on
Possible....
Hey brother i have a question? Hopefully you get to see my message. I have a dually 2017 f350. My front cab lights, and bed side marker lights turn on aswell when unlocked. As soon as i turn the truck on they remain on for 2-3 seconds then shut off….. checked fuses but idk whats the next step? Can you help me out please?
I have 2 SDs (2016 and 2015, Platinums) and installed airbags on both for level towing. I can't find a supply for the illumination for the switch pane with press gauge. I have a chassis upfitter manual and find no mention it there either. Have an idea of where there is a source for that, there is one?
Not sure bud, id have 2 look into that
ARod I have a 2012 F-350 6.7 4x4 crew cab long bed my door ajar switches work and the indicator on the dash works my interior map lights work but won’t shut off when you exit the truck , if the dome light bulb is blown will that cause the lights to stay on and it has no high beam headlights the high beam indicator comes on on the dash , I have checked all the fuses and they are good I am going to replace the rear seat dome light bulb and check for power to the headlights, if I have power to the low beams could I not have power to the high beams even if the high beam indicator is coming on on the dash
Sounds like u got maybe a bcm issue....
Currently have same issue. Off to testing!
Good luck
Followed the trouble shooting step by step. First all doors indicate, #12 fuse is good. Removed the plug from the BCM and applied 12v to the grey wire w/ purple trace. The dome lights all come on. Definitely the BCM. 2012 F250 w/ 103K miles. Thanks so much. I don’t have a programmer, so making calls Monday.
2012 F350 Same issue and had Ford dealer repair, new BCM put in. Several days later the lights went out. Another Ford service center looked at the issue. They dropped headliner and looked for causes of possible shortage, none found. They replaced the BCM. However, several days after new BCM install the interior lights went out again. Exact same scenario as before. Do you think there could be a short or ground issue coming into the interior light harness or bad BCMs? By the way, excellent demonstration and explanation!!
A lil while ago, I encountered a bad batch of BCM's
My 99’ 7.3 dome light does not work and the cargo lights continuously have power going to them???? Gem module???
Strong possiblity with those ones!
ARod, at 4min 10sec into your video you are supposed to be checking fuse #12 (15 amp), but you are checking the wrong one. You are checking fuse #11 (10 amp). Double check what I'm saying here (I might be wrong).
But this video did diagnose my problem exactly on my 2012 F350. Easy enough to buy the BCM. Now I just have to figure out how I'm going to program the BCM.
Thanks for the help!
You ll need a scan tool
Can you program a new BCM with Forscan? How? Do you just load from a backup of the old bcm?
That's go na require a dealer level scan tool pal
My interior lights are stuck on how do you turn them off?
How often to those BCMs fail? I've already had this issue 2x on my '12 F350. Dealers charges me > $500 each time they've replaced it. I also have an intermittent cycling of the windshield wipers when I turn the key on (a friend has the wiper issue in his '17 F350 also).
Wipers ya need a multifunction switch stalk. Yes bcms fail for a variety of reasons....if they replaced it...was it within the 2yr unlimited mileage on all parts?
@@PowerStrokeTechTalkwARod Subject truck is '12 F350 Larriat FX4. First warranty issue was switch stalk. The problem was that the wipers would give one cycle (occasional/intermittent) when key was first turned on. The problem re-surfaced within the part warranty time frame (but now after 3yr/36k miles) and dealer told me the issue was not turn stalk but now BCM. This cost $500 to replace. Next issue was dome lights not coming on with door and this was also attributed to BCM. This was a while ago so don't recall actual time between BCM failures but dealer did not offer warranty on part. Now dome light issue has re-surfaced but it is an intermittent issue. Dealer has told me that the parts warranty is only 90 days.
I've also had numerous issues with power folding mirrors. Is this common? Door lock key fobs have been problematic (since almost new) as well (it's not the batteries). I've also replaced the DEF heater (like in your "Must See" video) and I think something is haywire in the ignition switch key installed sensor (seat can't decide if it wants to slide forward or backward until I turn the key). Ugh!
I have an '00 7.3 l F350 XLT (bought new in '99) which now has 370,000 miles. Original engine, stock injectors, no real big problems until a couple weeks ago when the original auto-tranny finally gave up. Truck has been great and the only electrical issues I have ever had were a speed sensor on the rear diff and had to replace camshaft sensors. New truck seems to be very mechanically reliable but not in regards to the electrical.
Wow, all FORD parts are 2 yr unlimited mileage warranty. Have a video on the seat problem. Yepp gotta love the old trucks 😉
@@PowerStrokeTechTalkwARod Thanks for the info. I'll look for the seat problem video. I didn't see an answer to my question....Are power folding mirrors issues a common problem? Keep up the good work with the channel.
Oh oh sry bout that....no they are not a common issue. Dont get too many of those. Id try another switch from another truck..b4 i buy one
2012 350 same exact issues! My question is can ford program new bcm with aftermarket tuner for emissions Installed on truck?
I can! Someone else who cant think outside the box prolly wont...
So where is your shop at so I can bring it to you lol
@@jimmyduck2100 DETROIT
@@PowerStrokeTechTalkwARod well that sucks I’m in NC
Bummmer..ship it over🤷♂️ i got chu
Well your video was 100% helpful. I traced my problem to the BCM just like you advised. My question is, instead of replacing the BCM would it be reasonable to clip the grey/violet wire from the multiport socket and apply a fused 12v power supply to the wire separate from the BCM? The interior lights do illuminate when the BCM is bypassed. Does the BCM control the door light switch, and would bypassing the BCM still turn the lights off when the doors are closed? Thank you for any input for I am just trying to avoid the BCM replacement. Also, I noticed that my door chimes only work when the key is in the ignition. Are the door chimes on the same circuit as the dome lights?
Id dunno bout goin around the bcm....sounds like you be tryin to start a bad electrical headach
My lamps haven’t worked for a few months, now my windows and power locks are also not working. Checked all fuses. Could the BCM be the cause of all of it?
...it could be
My 2011 is having a similar problem but the dome lights come on when door is open but not when pushing the buttons on the actual lights. Front and rear. I've replaced all bulbs too
Ok
My dome light stays on my 01 ford f250 XLT short bed crew cab
👍
Dome light not coming on. 2000 F150 . basic model. relay was bad. did not fix it. bulb good. radio works. time to bypass if it is the pcm, what ever that is? Were is my first car '57 Chevy!
Pcm is 4 the engine. The GEM is the controller for that
What about the rear overhead courtesy lamps above the back seat? My front 2 come on with the door open, but the rear 2 do not.
Ok…
Reinstalled my headliner on my ‘23 F250. Dome light, power window slider and speaker don’t work? Ideas?
Prolly didn't plugg something in
@@PowerStrokeTechTalkwARod
MF!! Twice in one week?? You just helped with the cab lights!!!!
I kept searching for a “system reset” or something that would re-recognize the headliner…
Then I read your comment and I rolled my eyes. And just a few seconds afterwards I remembered this big ass cam bus looking thing on the b pillar behind the seatbelt
All this for a leak on a brand new truck.
Thank you sir. Thank you very much.
Rob. NH
Hey, that's what were here for! Share share share me
Is there no way to just reset the bcm/sjb?
If i replace the bcm can i then take somewhere for reprogramming?? Or will it be out of commission?? Thanks
Outta commish babe!
@@PowerStrokeTechTalkwARod ok.. Thank you.
I wonder what scan tool you have 😅
Do you ever have issues with a 2014 Platinum radio screen not working?
Yes, sync update has fixed minez
PowerStroke Tech Talk w/ARod thanks for the reply pal
First! What kind of fuse tester are you using?
Powerprobe!
What if the fronts work but not the back seat and I have good fuses and good lights
Gotta go thru the associated pin point test for that them
@@PowerStrokeTechTalkwARod ok I might have to take it in! Haha I really don’t want to have to buy a new fuse thing!
Might have too
Other than my dome lights not coming on, if i don’t replace the BCM at this point are there more things that’ll fail?
🤷♂️🤷♂️🤷♂️
My issue is c4 with the on demand lights not working. Courtesy lights do. What is the circuit GD179 bk/Vt? Assuming that’s a wire black with violet stripe. Almost sure it’s my bcm but want another opinion
Thee info u just gave me....you'll have 2 remember when I made this....years ago. I don't know what your working on. If you wanna get down on diag, ya gotta pay for my time. If you think it's the BCM, then replace it. You'll need 2 keys & the mod will have 2 be programmed in.....
PowerStroke Tech Talk w/ARod I figured it out. I burnt a fuse on the BCM. Replaced and works fine.
Thank you for the video! How difficult is it to replace the BCM? My 2015 F450 has all the same problems as the truck you videoed.
Gravy job, you will need a scan tool to program the BCM and 2 working PATS keys.
When you say scan tool, are you referring to the IDS software? Is there a way a DIYer is able to accomplish this? Is there a scan tool you’d recommend? Thanks! I also liked your video on what 6.7L owners should know.
@@vonwiederrich5449 I'd like to know this as well.
John Nogueras -Hi John, what I found out is you do need the IDS software and hardware interface. I looked into buying it and the price is around $3000! And the software requires a key which is only good for one year and at which time you have to pay to renew for another year. This is the only way to reprogram these boards.
Thank u
Were both front and rear dome lights not coming on with this issue?
Yes
I got a 2013 crew cab and my dome lights turn on, on all my doors except my back passenger door any tips on to find out the issue?
Sounds like a switch bub....
Switch? Where’s the switch for that?
Good info !what’s the name of the tester you used ?
any one notice he tested the cluster fuse thats 10amp fuse not the 15amp running board light fuse ?
Ummmmmmm, u sure about that
Where can we find a new I'm?
Bcm
The dealership
@@PowerStrokeTechTalkwARod in Albuquerque 2000 back order
I have a brand new one in the box nver used
@@PowerStrokeTechTalkwARod how can I buy it?
Would a bcm From a junk yard work
Cld be tricky to program and configure