How to Find Fault on Daikin Wall Split System Air Conditioner (Green flashing light) 🤯🙌🏻

Поділитися
Вставка
  • Опубліковано 13 жов 2024
  • Get Paid To Use Social Media! 👉 bit.ly/3QvuIiV
    Troubleshoot your Daikin Wall Split System
    Green Flashing Light??
    We've been asked to do a video on how to retrieve an error code using your handset remote for a Daikin Wall Split Air Conditioner (thanks Jake). The error code is useful to pass on to the service technician before they arrive so they can get an idea of the fault prior to their arrival. This tutorial will take you step by step on how to do it.
    UPDATE: You can visit here and enter the Error Code:
    www.daikin.com...
    Please Like, Comment and Subscribe to our Channel! Cheers.
    For any other Air Conditioning service matters in Adelaide, contact Morphett Air on 8277 0511 or visit our site at www.morphettair.com.au
    Morphett Air
    602 Marion Road, Park Holme SA, 5043
    08 8277 0511
    shorturl.at/hlJZ6
    #hvac #hvaclife #hvactechnician #airconditioning #hvactips #morphettair #hvactechs #hvactutorial #daikin #panasonicairconditioning #ducted #hvacsystem #hvacaustralia #heatingandcooling #hvacservice
    air conditioning installation cost, air conditioning Adelaide, air conditioning unit prices, air conditioning installation price, air conditioning unit cost, air conditioning unit cost, air conditioning, adelaide service, air conditioning specials Adelaide, split system air conditioner service Adelaide, air conditioning installation instructions, Air conditioner repair videos, air conditioning system components, Daikin air conditioner installation,
    Air conditioner repair troubleshooting, air conditioner maintenance kit, air conditioner maintenance schedule, air conditioner installation diy, Daikin air conditioner remote control, Daikin air conditioner review, Air conditioning service training, air conditioning unit outside, air conditioner maintenance diy, Daikin air conditioner remote, Daikin air conditioner inverter, Air conditioning unit not working, wall air conditioning units, split system heating and air conditioning, Air conditioning unit filter, Air conditioning systems types, Air conditioning system explained, air conditioning unit portable, air conditioning and heating unit, air conditioning installation process, Air Conditioning white noise, air conditioner repair diy , Air conditioner not blowing cold air, air conditioner vent cleaning, Air conditioner leaking water inside, air conditioning filter change, air conditioner cleaning service ,reverse cycle air conditioning installation, Air conditioning unit leaking water, air conditioning system diagram, Air conditioning filter cleaning, air conditioner maintenance service, air conditioner filter cleaning, Air conditioning service valve, split system heating and cooling, air conditioning maintenance service, air conditioner cleaning machine, air conditioner split system cleaning, air conditioning and heating repair, split system heating and cooling installation, Air conditioning system installation, how to install wall air conditioning units, Air conditioner repair training online, air conditioning cycle explanation, Air conditioning and heating units combined, Air conditioning filter replacement, Air conditioner repair tutorial, Air conditioning unit how it works, air conditioning system reviews

КОМЕНТАРІ • 176

  • @Morphettair
    @Morphettair  2 роки тому

    Get Paid To Use Social Media! 👉 bit.ly/3QvuIiV

  • @BradTea
    @BradTea 8 місяців тому +1

    That did the trick, thanks! I got an E1 which is faulty communication between the indoor and outdoor units. I turned the AC off at the meter board and back on again, and now it's working.

  • @rogertedds9829
    @rogertedds9829 3 місяці тому +1

    Legend mate. I'm in Colorado and it's 97 fahrenheit today and I couldn't get my units working until I turned off the power outside and the circuit breakers inside. Waited 30 seconds, everything works and I'm basking in the cool flow as I type! :)

  • @fieldo85
    @fieldo85 5 років тому +5

    You Sir are a bloody LEGEND!!! Just used these instructions to find I was getting a U4 error code.
    Took your advice and reset the unit. Now she's working for the first time in a fortnight. CHEERS

  • @amandaliu856
    @amandaliu856 8 місяців тому

    Fixed my problem. I have no words but thanks!!!!

  • @majmontgomery
    @majmontgomery 3 місяці тому

    Thank you! The only actually helpful video I found for my Daikin split.

  • @G655
    @G655 Рік тому +1

    All this for some code air. Thanks for the tutorial mate.

  • @mitchsilver4751
    @mitchsilver4751 5 років тому +6

    Great info. Helped solve our problem. Thanks for taking the time to post and know that someone out here in the US of A is watching and learning from your post!

  • @DBR00
    @DBR00 Місяць тому +1

    I always get 00 faults. Usually a power cycle from the breaker fixes to the issue but I'm not sure why this happens so frequently. Thoughts?

  • @nathanhowe8853
    @nathanhowe8853 3 роки тому +2

    Great video. By chance we also had a U4 fault and the manual power reset did work! Thanks

  • @rafraf28
    @rafraf28 3 роки тому

    We had the Same problem. I just reset our main breaker since the reset switch on the roof is hard to reach. It works! Our A/C is now working good. Thank you

  • @uncledrew4027
    @uncledrew4027 5 років тому +6

    I got the same error code and I use your method. Damn, it works. Thank you so much!

  • @marshahorner832
    @marshahorner832 4 роки тому +1

    Totally worked! Thankfully, my code was the outside unit malfunction. I felt so smart!

  • @AzeezTAofeeqOPEYEMI
    @AzeezTAofeeqOPEYEMI 3 дні тому

    Good job

  • @godkingmaximus2710
    @godkingmaximus2710 2 роки тому +1

    Thank you so much. The reset worked !

  • @natalijanaschova3650
    @natalijanaschova3650 3 роки тому +1

    I am grateful for the help you gave some useful tips thank you 😊

  • @nickmontoya3255
    @nickmontoya3255 3 роки тому +3

    Thanks for sharing! Great tutorial. This was straight to the point, very easy to follow. Thanks!

  • @ulfhayduk4816
    @ulfhayduk4816 Рік тому

    Thanks mate… this was super helpful! Beautiful!!!

  • @mhorner6224
    @mhorner6224 3 роки тому +2

    You're tutorials are so simple to follow. Thank You. Our Daiken remote suddenly won't illuminate properly. Batteries have been replaced, unit functions but remote won't stay lit. Only briefly went not using and just seated on table. Is there a fix?

    • @Morphettair
      @Morphettair  3 роки тому

      Hi M Horner, Glad to hear you like our tutorials! Looks like you've done what you should have done first, changed batteries. If the remote is still not working, it sounds like its time for a new one unfortunately. Contact your nearest Daikin dealer and they will help you with a replacement.

  • @julianp.1991
    @julianp.1991 3 роки тому +1

    U4 Code indication. outside unit malfunction. I did what you said and it works. Thanks very much.

  • @stuartsmith7514
    @stuartsmith7514 2 роки тому +1

    Thank you for your noble contribution

  • @fmissen2701
    @fmissen2701 4 роки тому +3

    Great thank you helped with our error being the same we are guessing due to some recent power outrages

  • @deeagee3349
    @deeagee3349 4 місяці тому

    Thank you, it works… you are the greatest

  • @PX125E
    @PX125E 4 роки тому +1

    Thank you i got a U4 and did what you said and it works.

  • @kchedville
    @kchedville Місяць тому

    What happens when the Beep Sound no longer is working ? -- our Daikin 12k Unit randomly goes off and the Light is Blinking Blue --- once i reset the Power Breaker -- it will begin working again until it shuts off again and it may take just half an hour or sometimes many more hours.....I tried finding the Error using the Remote but the Unit does not beep as yours does in the video... Any Thoughts you have would be appreciated...

  • @baalbaalblacksheep191
    @baalbaalblacksheep191 4 роки тому

    Didn't bother with the codes.. Just did the 10 second reset and worked the first time !! Recent storms must have upset the poor misguided thing... And it got an overdue filter clean just for good measure ! Thanks !!

  • @FredaHoward-n1r
    @FredaHoward-n1r 10 місяців тому

    Thank you so much. You are a legend!🙏🌻

  • @atahua4tayla
    @atahua4tayla 2 роки тому +1

    THis was so useful. Thank you so much. Straight to the paoint and easy instructions. This would be so handy for educate tenants and owners

  • @SallyMartinez-Skent
    @SallyMartinez-Skent Рік тому

    Thank you. This was what was wrong with mine.

  • @geremebrettbuendia4185
    @geremebrettbuendia4185 5 років тому +1

    Got my aircon working by following the steps. Very helpful! Still, i think should be a good idea to inform the technician about the error code. E5 which from the error table showes compressor/inverter

  • @203kExperts
    @203kExperts 2 роки тому +2

    My unit is beeping 25 beeps, then pauses and repeats the beeping even with the unit powered off. There is no error code. What could be the issue? How do i troubleshoot this? Thanks for your input

  • @leechikyen8560
    @leechikyen8560 Рік тому +1

    Thanks!

  • @NamanastyOG
    @NamanastyOG Рік тому +4

    mines just goes through all codes and only beeps long when it gets back to 00

  • @TDTas
    @TDTas 4 роки тому

    Thank you, this fixed my problem after a power failure.

  • @wangshuoning609
    @wangshuoning609 Рік тому

    It has worked! Thank you

  • @qingcai3482
    @qingcai3482 2 роки тому +1

    i just follow your guild. it works . thank you

  • @paullynch8316
    @paullynch8316 Рік тому

    How often and who’s responsible for cleaning and servicing aircon in Rental apartments

  • @barrythomas529
    @barrythomas529 2 роки тому

    Daikin mini split installed. Adding to my house will need another Mimi split.. what is the best brand. Tried to return unit,, was told lemon law did not apply.

  • @paullynch8316
    @paullynch8316 Рік тому

    I have this system it’s 5 years old I’m the first tenant in this unit there is 2 units large In living area smaller unit in bedroom the unit keeps going back to 24 d after I turn it down again to 18 deg the unit turns off then I turn it back on

  • @soccer_edit
    @soccer_edit Місяць тому

    Whee do I get that table for the codes

  • @tonyf1964
    @tonyf1964 2 роки тому +1

    Hi my aircon fan only isolates up and down , not left and right like it should. Can you tell me why. Thanks

    • @Morphettair
      @Morphettair  2 роки тому +1

      Hi Tony There are generally 2 x louvre motors. One for horizontal louvre and one for vertical. Sounds like your horizontal has malfunctioned. Best to contact a qualified service tech. Give them the indoor model number (info on indoor unit) and the could potentially bring one with them. 👌🏻

  • @СлаваСлава-з4х
    @СлаваСлава-з4х Рік тому

    ive got a 21 inch window and this ac just barely fits in with the side panels, wasnt hard to figure out installing just need a screwdriver and it kicked in pretty fast

  • @meg9733
    @meg9733 3 роки тому

    Hi this is extremely helpful! Thank you!

  • @emmaland8055
    @emmaland8055 4 роки тому +1

    OMG lifesaver! It worked, thanks a million

  • @911engineguy
    @911engineguy 2 роки тому +1

    Curious, how accurate are the codes?
    Mine is displaying U0.. shortage of refrigerant...

    • @Morphettair
      @Morphettair  2 роки тому +1

      Hi Michael, the error codes are an indicator of potential issues and will generally steer you in the direction to start your diagnosis. Generally they're pretty much on the money but it always pays to have it checked by a qualified tech and preferably one that has experience in working with Daikin's equipment. Hope it works out for you.

    • @911engineguy
      @911engineguy 2 роки тому +1

      @@Morphettair trying to find someone will to inspect. Everybody so far just wants to replace with a new unit...

    • @Morphettair
      @Morphettair  2 роки тому +1

      @@911engineguy Hi Michael, this will depend on a few things. Depending on how old the unit is, a refrigerant leak can sometimes be a costly exercise, particularly depending on the type of refrigerant that is in your system. It could be R22, R410A or R32 and they can vary considerably in price. In addition to the refrigerant, there is Nitrogen for pressure testing plus labour. In some instances, its not a cost effective option to be repairing (repairing an older system will not guarantee longevity). Hope this makes sense.

    • @911engineguy
      @911engineguy 2 роки тому

      @@Morphettair appreciate the detailed reply.

  • @maxflight777
    @maxflight777 5 років тому +1

    U3 and U0 fault codes in my system ...thanks for a useful video

  • @lisadove6265
    @lisadove6265 Рік тому +1

    I am getting no error code, but the green light is still flashing. Any clues?

  • @arcaddiction
    @arcaddiction 3 роки тому +1

    Great video! Mine gives an error code A6, which says fan motor failure. Any help on that?

    • @Morphettair
      @Morphettair  3 роки тому

      Hi Mohit, unfortunately it sounds as though you need to contact a reputable Daikin Dealer that handles service. Could potentially be fan motor & printed circuit boards. Depending on age, it may be a better investment to consider replacement if this is the case.

  • @tompourbakhtiar6781
    @tompourbakhtiar6781 3 роки тому

    Thanks for video, I have a Daikin split unit with the same problem, after each reset the Ac works great for couple hours then stops working. please tell me what seems to be a problem. thanks

    • @Morphettair
      @Morphettair  3 роки тому

      Hey Tom, the fact that the reset is clearing the fault is the reason it continues to run following a hard reset. There must be an issue if it keeps faulting and its probably time to have a qualified service tech look at it.

    • @c.a.l.e.b.s
      @c.a.l.e.b.s 2 роки тому

      @@Morphettair on these units we don't have a fault but I have 3 heads running off a single outdoor unit. It will run a normal heat cycle getting the room up to temp and the one head then goes through this odd operation cycle with plastic clicking, random fan blowing cycle that is impossible to sleep through.
      Some techs online say its the fluid in line making gurgling running the other units as well as the plastic actuator Or gate inside the specific unit that clicks opening or closing?!? I'm so frustrated after the expense. I wish I could simply have it run quiet all the time in heat mode and not do these damn cycles it does.
      Any thoughts on this my friend, I would truly appreciate it you seem to know these well.

  • @cjpage101
    @cjpage101 3 роки тому +1

    Great vid, I had error u4 and resetting it sorted me out!

  • @thesa33225
    @thesa33225 5 років тому +3

    Thank you, Sir. It's really helpful. CHEERS!

  • @AfricanCreature
    @AfricanCreature 3 роки тому +1

    U2 for
    Me but what do I do

    • @Morphettair
      @Morphettair  2 роки тому

      Hi, there could potentially have been a power fluctuation causing this error and could possibly be a fault in an outdoor printed circuit board. I would recommend seeking advice from a qualified service agent for further diagnosis. Cheers.

  • @shaziyahbadgujar6624
    @shaziyahbadgujar6624 2 роки тому

    I got no long beep till I again reach zero ? So what does that mean. ?

  • @karthikatchuta8264
    @karthikatchuta8264 3 роки тому

    Is there a quick fix to error A6? Malfunctioning of Fan Motor

  • @marymorey3431
    @marymorey3431 Рік тому

    What is the heat code

  • @rossfurphy4213
    @rossfurphy4213 5 років тому

    Hi, great videos thanks. I have tried the method in the video to try and obtain a fault code on the indoor unit but no fault code is present. The Unit flashes green for about 10 minutes and then switches on and seems to function normally. Any other suggestions?

  • @cynthiabaxter6936
    @cynthiabaxter6936 Рік тому

    Where is the circuit panel board on the outdoor unit? Service person came by 2 months ago and they keep trying to fix. 1st heater stopped they ordered a valve. When valve came in they said it was faulty. So the orders another one with a celluloid or something like that word. Not sure. Then They said it was incorrect. There have been 3 visits since was first diagnosed. Third time service person said he could not fix and left the outdoor panels on the unit bait screwed on. Screw were left sitting on top of the unit. It's been raining for 2 days, I know its very wet inside there. And no one even came back to screw on the panels to prevent rain damage to circuit board. Where is the circuit board on the outdoor unit. I thought i saw it when they opened front panel. So far all they will do is talk to me. And claim there's no way anything can be hurt by the train and dirt. This has been going since December 2022 and it's now February 11, 2023. Please help.

    • @Morphettair
      @Morphettair  Рік тому

      The printed circuit board is usually at the top of the unit beneath the lid

  • @TheSqhunters
    @TheSqhunters 4 роки тому

    Hello .Can you tell me how I can start up a condensing inverter split unit without the indoor wiring attached .

  • @danielmorrow8881
    @danielmorrow8881 3 роки тому

    How do I still trouble find it if it does not do a long beep

  • @MacBjorn
    @MacBjorn 2 роки тому +1

    Thank you for the video. FYI the error code link no longer works.

    • @Morphettair
      @Morphettair  2 роки тому

      Thanks heaps..you’re right the first one doesn’t work (I will remove it) but there is also a second link below it that does. Here is the link www.daikin.com/products/ac/services/errorcode_search?lang=en 🙏🏻

  • @richamodgill9395
    @richamodgill9395 2 роки тому

    Hi. I did this but it not helped me. I bought a new daikin ac, only a 2 months old. Issue I am facing is it is getting turned off automatically sometimes. Can you please guide. Any help would be appreciated. Even daikin team was not able to solve my problem.

    • @Morphettair
      @Morphettair  2 роки тому

      Hi R M you may have a off timer set? If not, when it closes does the green light flash?

    • @richamodgill9395
      @richamodgill9395 2 роки тому +1

      @@Morphettair Hi it is not timer set issue. I don’t set timers. And for light flashing I will try to monitor. It gets off so quickly and randomly it is difficult to monitor when it does. Will try to monitor and revert you on the same.

  • @HISandHISAlone
    @HISandHISAlone 4 роки тому

    What if you don't have a chart to decipher what your particular code means? I have NO manual either! The unit continually turns itself off, green light blinks and does NOT respond to the hand device. It seems I only have trouble in the hot summer months! Geez..

    • @Morphettair
      @Morphettair  4 роки тому

      Hi the link is in the description of the video for the Error Code Matrix...here it is: www.daikin.com/products/ac/services/error_codes/pdf/sm-ts3_p1-6_errorcode.pdf

  • @yensingchew103
    @yensingchew103 3 роки тому

    Hi, i dont hear beep sound at all after press cancel button

  • @vinothinis2960
    @vinothinis2960 4 роки тому +2

    What to do when 00 come

  • @luna9659
    @luna9659 3 роки тому

    My apartment never gave us the remote to do this is there a way to do this without the remote? my green light has been flashing for 1 month it says my fan is on when its not ,it will turn on for 2 min shut off and repeat when I reset it or turn off the power button manually on the unit it opens the vent then closes it immediately i even tried shutting off the breaker to the ac unit no luck at all😞

  • @mblabezza
    @mblabezza 2 роки тому +2

    Mines not even working or turning on… :(

    • @Morphettair
      @Morphettair  2 роки тому

      Sorry for the late response, has been a busy time. You may want to try resetting the system (to do so follow the instructions here: ua-cam.com/video/d_e7x3LFbNI/v-deo.html ) Failing that you should also make sure the circuit breaker has not tripped. Having done both of these and still nothing, you may need to contact a qualified service agent. Best of luck.

  • @Iain.G.D.B
    @Iain.G.D.B 2 роки тому

    Thanks heaps. I have an H6 error.

    • @Morphettair
      @Morphettair  2 роки тому

      Check all internal wiring in relation to the compressor and detection circuit. Possible high differential pressure is present. If possible, check the inverter output with a Daikin inverter checker…essentially, you’ll need to contact a qualified service agent.

  • @leonalthalos08
    @leonalthalos08 2 роки тому

    Sir, my daikin ac timer is blinking 3 times. Tried to find the error code many times but no beeb whatsoever. Need advice please.

    • @Morphettair
      @Morphettair  2 роки тому +1

      Unsure but you could try resetting system. If this doesn’t work I’d suggest arranging a visit by a qualified service agent. If you want to try resetting first, here is how to do it: ua-cam.com/video/d_e7x3LFbNI/v-deo.html

    • @leonalthalos08
      @leonalthalos08 2 роки тому

      @@Morphettair Thank you sir, tried and still it doesn’t work. It only worked exactly around 30 minutes before the compressor stopped and it starts to blinked. But it will work again and the blinking stopped when I turned it off and on using the remote but only for 3 times. Then it will always blinked even if I turned it on and off using the remote. But eveytime I turned off the circuit breaker, it will always worked again for 30 minutes. If I kept turning it off just before the 30 minutes mark, and on again it will run fine. So, in your experience what could be the cause of this sir?

    • @Morphettair
      @Morphettair  2 роки тому +1

      @@leonalthalos08 I can only suggest arranging a service visit to formerly diagnose

    • @leonalthalos08
      @leonalthalos08 2 роки тому +1

      @@Morphettair Right, will do. Anyway, thank you for taking your time to answer my questions. Appreciate it.

  • @SlobberJohnson
    @SlobberJohnson 4 роки тому +4

    Just my luck. Didn't get any error code long beep. Tried going outside to reset the system twice and still not working like it should. Figures

  • @jeetusolanki7
    @jeetusolanki7 4 роки тому

    How to chek ac on the table without connecting pipes for testing circuit is proper working or not

  • @kaushambishukla8962
    @kaushambishukla8962 4 роки тому

    The two beeps with 2 colors green n orange means

  • @cannybuildit8794
    @cannybuildit8794 3 роки тому

    My unit inside does not beep as I scroll through the codes..not sure what code it is...

    • @Morphettair
      @Morphettair  3 роки тому

      Hi Canny. If you've followed the instructions carefully, not sure why it wouldn't be beeping. Make sure you are standing in front of the indoor unit (within range), you may need to try replacement batteries. On the other hand, that could be the issue, the indoor receiver printed circuit board has an issue. Try the for-mentioned suggestions and if that doesn't work, you may need to put in a service request visit. Cheers

  • @janlewis7144
    @janlewis7144 4 роки тому

    My aircon switches on vents open then close and green light keeps flashing

  • @siddheshkeni1312
    @siddheshkeni1312 2 роки тому

    My daikin ac wont turn off even after setting the timer for 2hrs after completing 2hrs the ac wont turn off

  • @Fknstud833
    @Fknstud833 5 років тому

    Not getting heat is there a code for that? Thanks

  • @thuylinh7128
    @thuylinh7128 3 роки тому

    Thank u a lot it works

  • @B.Essentials
    @B.Essentials 3 роки тому

    It does the long beep on 00 what does that mean?

    • @hunterboyer4336
      @hunterboyer4336 2 роки тому

      Mine is doing the same. Any luck with it ?

  • @LikeACows
    @LikeACows Рік тому

    How to hear the long beep when theres no sound

  • @gaba05sumit
    @gaba05sumit 3 роки тому

    My Ac is not beeping at all, how do I identify the code?

  • @yiman7654
    @yiman7654 3 роки тому

    Hi, my air conditioner screen shows U9, do you know what’s the problem and how to fix it?😂

  • @sahebalikhan830
    @sahebalikhan830 3 роки тому

    F3 error explain Daikin inverter ac

  • @godiscominggetready8315
    @godiscominggetready8315 3 роки тому

    What if you don't have the original remote

  • @lbcoach2295
    @lbcoach2295 4 місяці тому

    Thats what mine is saying right now U4

    • @Morphettair
      @Morphettair  2 місяці тому

      Hi U4 commonly refers to a communication error between the indoor and outdoor units. Best to have it checked by a qualified service agent, however this will generally suggest replacement outdoor printed circuit boards and fan motors.

    • @lbcoach2295
      @lbcoach2295 2 місяці тому

      @@Morphettair thanks. Appreciate your response. I had it looked at. There was corrosion on the switch that had to be cleaned off.

  • @BettyConfetti92
    @BettyConfetti92 4 роки тому +2

    For anyone who has this question: A short beep and *two consecutive beeps*
    indicate non-corresponding codes.

  • @yashkshirsagar3273
    @yashkshirsagar3273 4 роки тому

    I got error code F3 what should I do?

    • @michelleashton2718
      @michelleashton2718 4 роки тому

      funny that so did I, trying to read if anyone knows how to fix it

    • @yashkshirsagar3273
      @yashkshirsagar3273 4 роки тому

      @@michelleashton2718 hey I know what happened to my AC actually there was leakage of gas, so my suggestion is call the technician and get the gas filled. My Instagram is
      ' yash_kshirsagar_ '
      Contact me for anything more.

  • @balajisha6173
    @balajisha6173 3 роки тому

    Dakin ac not turn on

  • @jinoyjohn1
    @jinoyjohn1 5 років тому

    Split unit shows A3 error
    .

  • @michelleashton2718
    @michelleashton2718 4 роки тому

    f3 code, how do I fix it

    • @Morphettair
      @Morphettair  4 роки тому

      Hi MIchelle, the discharge temperature is high, would recommend a visit from a qualified refrigeration tech.

  • @johnnypuertorro6981
    @johnnypuertorro6981 5 років тому

    How troubleshoot EA Code

  • @novakt9407
    @novakt9407 3 роки тому

    00?

  • @drrenukashettyDENTAL
    @drrenukashettyDENTAL 3 роки тому

    My error code is 00

  • @sheilaoquendo4888
    @sheilaoquendo4888 4 роки тому

    What is - -?

  • @venderitso1929
    @venderitso1929 5 років тому

    Ill try this but the result is 00

    • @Morphettair
      @Morphettair  5 років тому

      Hi Ven deritso.. 00 is the beginning of the sequence (ie the first code that appears). You'll need to cycle through the various codes by pressing the "Cancel" button briefly and you'll here a short beep each time. Keep cycling through the codes until you here a distinctly long single beep. This indicates the error code in question. If you cycle through with out hearing a long beep, this will indicate that either there is no error or it hasn't registered as a fault. Often it will take a few attempts before it registers a fault. In some cases you can try resetting the system if there is no fault registered and you can find the video on how to do that here...ua-cam.com/video/d_e7x3LFbNI/v-deo.html

    • @ChristinaMarieArtistry
      @ChristinaMarieArtistry 5 років тому

      I tried this and my long beso is at the 00

  • @jabanoshi
    @jabanoshi 4 місяці тому

    I got 00

  • @fuckofffuckwit
    @fuckofffuckwit 5 років тому

    Like I got time to fk around with it like this Jesus H Christ, NEEDS TO BE SAID!

  • @gcwoodhead4180
    @gcwoodhead4180 2 роки тому

    This ac unit as absolute shit

  • @mimaorusa3340
    @mimaorusa3340 2 роки тому

    H9

    • @Morphettair
      @Morphettair  2 роки тому

      Suggests thermistors, but recommend you have a qualified service agent formerly diagnose.

  • @卬災
    @卬災 4 роки тому

    Ree

  • @04792446794
    @04792446794 4 роки тому

    F6 how to fix sir

  • @vinothinis2960
    @vinothinis2960 4 роки тому +2

    What to do when 00 come

    • @beasyhomie
      @beasyhomie 3 роки тому

      just press cancel mate..