How to Iinstall the 52 in. Zandra Smart Ceiling Fan by Hampton Bay
Вставка
- Опубліковано 6 лип 2024
- This video covers the complete installaiton and setup of the 52 in. Zandra ceiling fan by Hampton Bay (model # 92380 & 92382 / SKU 1008631081, 1008630976). You can use the links below to fast forward to any step of the installation.
Safety Notes - 1:21
Parts Overview - 2:04
Removing the Mounting Bracket - 4:04
Installing the Mounting Bracket - 4:37
Routing the Wires / Attaching the Downrod - 5:28
Preparing the Remote - 7:10
Hanging the Fan - 7:32
Installing the Remote Receiver - 8:15
Wire Connections - 8:45
Attaching the Canopy - 10:29
Attaching the Decorative Ring - 11:07
Attaching the Blade Brackets - 11:30
Attaching the Blades - 11:57
Attaching the Light Kit - 13:00
Installing the Wall Cradle (Decora Style Switch) - 13:25
Installing the Wall Cradle (Standard Toggle Switch) - 13:59
Operating the Remote - 14:39
App Setup - 16:17
Pairing the Remote - 17:49
Fan Stutter - 18:16
Congratulations! - 18:35 - Навчання та стиль
Thanks for the video - the fan didn’t come with installation instructions. Not that they’re always needed, but it’s nice to have something to refer to
Awesome feature-rich fan! Love the styling 😊
Gracias gracias ❤
Tu eres el mejor!!!
¡Gracias!
Hi! I'm trying to make a decision between this fan or the Hunter Aerodyne, but I'm not sure what's best. The Hunter fan is cheaper and I like the style bit better, but I'm worried that I might not tolerate the humming that it's produce by its AC motor. Do you think the HB Zandra would be much better than the Hunter? What do you recommend?
In our experience, the Hampton Bay fans are much easier to install than Hunter products. According to listed specifications, the Zandra fan is going to move more air. The Zandra also offers color temperature control for the light to let you choose different color temperatures ranging from warm white to daylight deluxe.
Should the antenna stay hidden or be exposed? My remote isn't working consistently.
The antenna for this receiver is not required to be outside of the canopy. We would suggest changing the frequency of the remote. Follow the instructions at the 17:49 mark and that will change the frequency of the remote to improve the remote signal. The may be an interfering signal in the area causing the weak reception. Changing the frequency should resolve the issue.
On the top of the down rod there is a pin that makes my wires twist up. How do I get that pin out or stop it from twitch when i tighten it
You can remove the screw from the ball and that will allow you to turn the downrod without twisting the wires. You can also try to hold the wires straight up while screwing the downrod into the coupler.
How to install when i have black, red and white cable?
We would suggest just capping the red wire with an electric nut and electrical tape and then wiring as instructed in the video. If the red wire is a switch wire, you could cap off the house black and use the house red instead. That would allow you to use the switch to turn the fan and light on/off simultaneously.
Will this work on a cathedral ceiling at a 10° angle?
Yes, the fan can be installed on an angled ceiling with a maximum angle of 20 degrees. Please note that you may need an extension downrod to ensure proper blade clearance from the ceiling.
@@ceilingfans101thank you
@@tlang14you're welcome!
When the fan is at 5th speed the hanging pole is oscillating, how can stop this issue(It even creaks)
Make sure that the slot of the ball is seated properly in the mounting bracket and that the set screw is completely tightened on the motor collar. The downrod should not move when the fan is operating. If that doesn't resolve your issue, we would suggest calling Hampton Bay customer service at 1-855-434-2678).
How do I flush mount this fan?
This fan does not have a flush mount option
My Fan light comes on in the middle of the night for no reason, how do I stop that from happening?
It sounds like your fan is receiving an interfering signal from another device in the area. This can be easily resolved by changing the frequency of the remote. Watch the video at the 17:48 mark for instruction on how to pair the remote.
Hi, I recently installed a ceiling fan with a light that came with a remote. Everything went well, however the fan and the light only works with the remote and the wall switch is completely un operational . Would you know what could be the issue ?
Typically, if there is a switch present, there would be 2 power wires in the ceiling - one would be a constant power wire (typically a black wire) and the other would be a switch wire (typically a red wire). Sounds like the receiver was just wired to the house's black wire.
@@ceilingfans101 thank you kindly. I was able to fix it. Appreciate it ! 😊