Brewtools Setup HOW TO
Вставка
- Опубліковано 6 лют 2025
- Every time I brew, I don't breakdown the whole unit and attachments. I made the video to demonstrate the assembly process and how to use the valves.
Want to support the channel why not pick up a t-shirt
teespring.com/...
check it out at MoreBeer:
www.morebeer.c...
Subscribe: / @portlygentleman
My Instagram: www.instagram....
Thanks for watching
MY Beard UK
Beard Balm amzn.to/2xCM5L4
My Fav Pomade amzn.to/2SEYmpS
Moustache Wax amzn.to/2L4UwBU
My Airwrap amzn.to/2SHyuK2 amzn.to/2WodcTG
California Beard Comb amzn.to/2YEuXQd amzn.to/2YYmPui
Fav Brew Gear UK
Brew Cleaner amzn.to/35EOe5r amzn.to/2zuMi3B
My RIMS amzn.to/3b7lALv
sample taker amzn.to/3fqfUzI amzn.to/2WoDC7S
My dry hop set up:
amzn.to/3cbzT2X
amzn.to/35ExJGL
amzn.to/35K2XfK
High Foaming Sanitizer amzn.to/2xJTqsu
Co2 Regualtor amzn.to/3c8TMYs amzn.to/2Lp2lTs
My CIP pump amzn.to/2YG2f1i
My TC Filter amzn.to/2WMjuMb
My Cam Gear UK
Camera amzn.to/2xJeP52 amzn.to/2Wp3VL4
Microphone System amzn.to/2WwAeXv amzn.to/35TFXe8
Lavalier GO amzn.to/2L6amfN amzn.to/2zysvQG
My lights amzn.to/3cck7Fd amzn.to/2Ah8yyg
Softbox amzn.to/2xEKnZ amzn.to/3fHeaC5
Here's the parts I use in my setup
26 - tri clamps
26 - tri clamp gaskets
4 - 3-way valves
2 - adjustable dip tubes
2 - 45s
2 - 90s
1 - T
1 - oxygenation stone adapter
2 - tri clamp to tri clamp sensor holders
4 - caps
1 - sight glass
8 - 19mm hose barbs to tri clamp
1 - counterflow chiller
2 - Brewtools dip trays
1- return temp sensor
Here's another video you might like detailing a three valve setup.
ua-cam.com/video/K1vNfdccI6w/v-deo.html
Awesome stuff! This is going to help a lot of people! Great Job!
Thanks David from you that means quite a lot 😎
Great video Mate, I am awaiting Brewtools units to arrive in Australia very soon. Your video's have been a wealth of information and great learning tools until my unit arrives. Keep up the great work
Thank you I plan on it 🍻
Top notch video Bradley, and nicely explaining the setting up of the unit and the valve setup as well, i'd like to see Brewtools do some tutorials showcasing a 1,2,3 and 4 three way valve setups with a step by step walkthrough on brewday of each configuration, i feel it would be a great help to the ever expanding Brewtools user base get to know the system better because as know its real easy to have a valve in the wrong position during a particular phase of the brewday...again great video my friend...
I've got a three valve tutorial recorded as well 🍻
Thanks for a great insight into this system, I retire in two years, think it I’ll wait till then. I might have just got my head around it. Cheers mate.
Thank you so much Happy you enjoyed the video. Why not spend the next two years enjoying it instead of waiting ?
Just got a Brewtools 40l for myself. This video has been a great help getting my head around the set up. Thanks
Happy I could help and congratulations!
Really sweet setup brother. Love your presentation and quality content.
Thank you
WOW, impressive been wanting to up grade to a bigger/better system than pot and bag method. Nothing wrong with that, happy with it. But that's a real up grade. Looks fun too
Thanka for the walkthrough - really helped in getting to understand all your valves :)
Thanks I'm happy you liked it lol I've actually modified it since the video last night. That's the beauty there are so many different ways you can customize it to your own liking.
@@PortlyGentleman Ha! :) What did you do this time? Another three-way-valve, or..? Can't wait 'till I land the final wife approval and can pull the trigger on a setup. My old system is starting to show it's wear and tear.
@@thomasmarcussen7549 LOL nothing that wild yet . I added a second 45 to my bypass, prep work. Everything is now at a much more pleasing angle. The discharge is now also slightly pointed down. Should make everything even smoother.
Thanks for the video have u got a video of a basic setup with just the two valves
My pleasure! You might have to look at some of my very early videos
Looking into this system and trying to understand it. This video helps a lot, thank you!
Just one little detail that confuses me: pause the video at 18:46. The position of the 3 valves would stop the flow altogether, wouldn't it? First valve is set to block the flow in the direction of the chiller but let it flow in the direction of the attached second valve. But this second valve is set to block what's coming from this direction, isn't it? Bit confused, sorry ...
Anyway, wondering what would happen if you set the valves to completely wrong positions while brewing. Would it be dangerous, bursting tubes, pipes, seals? Is there some sort of emergency stop? Or is the pump not strong enough to cause any damage?
Love this video. Showing even how the pump works. This helped a lot! Thanks! Gonna try my b40 tomorrow for the first time with only just water, then on to brewing Nøgne Ø - Two Captains - very soon.
Thank you very much I'm happy I was able to help! Good luck and let me know how you did?
@@PortlyGentleman Did not so well first time, kind of like a baptism of fire. Small leak bottom, temp sensor (blue/black cord), will have to replace. One of the three feet that locks the malt pipe to the top after lift-off don't work, requires manual intervention during lifting of malt pipe. Another reason for replacement. But the biggest disappointment, during lift off (no winch) the bottom of malt pipe has only 1-2 cm clearance from lock mechanism hits till the bottom malt pipe falls out of position for the center pipe. Which resulted in tipping over of hot wort and malt. When trying to place the malt pipe and top hat back, it became stuck with malt. Pump finally managed to push it out, resulting in a 7 foot jet of 170 °F hot wort hitting the wall. Thank god it didn't hit me. So that's how it went. ;-) And btw, a 3 valve setup should be a minimum setup if you want to both automatically sparge and clean up without spoiling wort all over the place.
That doesn't sound like it went well 🥺
Nice Job man, looking Great!
Thank you 🍻
Shrinkbrew here. Thanks, great explanation. so to pump the wort from bt to fermentation you switch the main built in triclamp to right exit - pump- bypass lower exit - and from the lower left try clamp through oxygenation directly to tank, without passing the chiller again?
On the 4 valve setup I use an open port on the fourth valve hook a hose to that. And use my bypass pipe work while still running out of the chiller. I hope that makes sense It is a little convoluted.
@@PortlyGentleman yeah. I think I kinda made it right yesterday when I passivated. transferred the acid from the bt to the tank to get used to the process. another q: when you sparge with water from the hlt, that comes in from the front right entry, so I guess you activate the pump and set the valve so you only have the straight flow from hlt to pump, closing the outlet from the bt? how do you measure the amount of water? and another one: how much flow or pressure of O2 do you use on the oxygenation kit? 1-2 bar? or just with the gut feeling? first brewday coming this Saturday and got myself oxygen today...
@@kasparscheidegger2172 Yes I run straight from the HLT through the pump. As far as the pumps power level that may depend a lot on the elevation of you HLT I usually monitor the green bed making sure there isn't a ton of standing sparge water on top of it. As far as the oxygenation I just go off of whatever seems right I should probably be a little more refined though.
Been loving your videos! I just put a B80 on order (thanks to your great overviews and advice), while it won't be here for a couple months, trying to get prepared. Have a question on what fittings are needed to hook up a standard garden hose to the pro chiller for water in and out, is this documented anywhere? Thanks!
Hey did you ever get your system ?
@@PortlyGentleman I did, thanks for asking, just also got the circulation manifold too but haven't had a chance to use it yet. Thanks for all your videos, it was essential to help me get started!
It's my pleasure 🍻
Awsome! I will updrade for less hoses myself. Cheers Bradley!
I'm happy you enjoyed the video 🍻
Great video, certainly answered some of the questions about the setup I didn't know I had :) Now if only I could afford one of these... My Brewzilla 35L will have to do for now!
I'm sure that thing still makes Great beer. Thank you so much for watching!
Thank you so much for this. Incredibly helpful.
no problem I'm happy to help 🍻
Great video Bradley!! I may need this soon!! Lol 👍🍻
Thank you for everything Brian seriously!
@@PortlyGentleman no problem!!
Bradley, is it possible to add a fifth valve for the CIP Ball, installed in the steam hat? Your videos are so informative, Brewtools should use them!! I’m only three brews in, and “nearly” had a floor less brewday yesterday!!
That could absolutely be done I'm actually considering that myself 😉 Thank you I'm happy I was able to help.I wish I started putting up videos because when I first got mine there wasn't a ton of information out there. I've tried to do my best to fill that gap, I wish They would use my videos that would be pretty cool. Thank you for your support I really do appreciate it 🍻
My brewtool 150 just arrived. I have only one 3 way valve. I am totally lost in setup. Can I do one 3 way valve setup together with counterflow cooler?
Yes but I would recommend at least two three-way valves
I love your channel. I am thinking about setting up my new brew room for my Brewtools What advice would you give for my new set up
Planet out thoroughly. That's the best advice I could give you without more detail about the space 🍻
@@PortlyGentleman
Thank you. I’m building a 4 car garage. The space above will be my brewery / bar. Right now it’s a blank slate. I love your electric wrench to lift out the grains. Right now I can’t brew without help. I plan on upgrading my electric outlets to allow me to run my Brewtools without tripping my breaker.
Hi Bradley, so happy I found your channel! Top notch brewing instruction! Can you tell me what lift winch you use? I am getting old and weak lol. Cheers!
Hi Bradley. Great video. I live in Australia and I’ve just purchased the B40 with a 4 valve setup. I am in the process of setting it up and I noticed that the power cable came with a 15A plug. After reading through the manual it appears the system can be configured to different maximum power settings (10A, 13A, 15A & 16A). Just wondering what power setting do you run yours at? I am assuming 10A would be suitable but may take longer to heat? My electrical circuits at home are 10A and I was debating whether I just change the plug to a 10A and set the system to 10A or get an electrician to add a 15A circuit and run at that setting.
I guess if I change to a 10A setup, I should dedicate a seperate circuit to run this to avoid overloading/tripping the breaker..
Any ideas/thoughts?
Love this one, I am about to swap out my GF with BT, very informative video!
I did something similar, You're not going to miss that GF !
Took me some time to realize you meant grainfather and not girlfriend.
@@somberlain123 Hahhah
Hey Bradley, what fitting did you buy to change out the fitting that comes with the digiboil? I think I need the TC34mm to 1/2” F-NPT.?
You are correct I believe
Nice setup! I'm thinking of expanding my current 3-valve setup to 4 valves. Might want to copy some of your pipeworks here! ;-)
Is it possible to connect the all-stainless mash circulation loop with the 2x45 + 1x90 bends without using a sight glass on the lower outtake?
I think you could probably do it yes 🍻
Is it possible to underlet somehow with this system?
Yes
I don't own one, but can you tell me what are the pipe sizes?
Do you have a list of all extra stuff you baught to make this setup?
The tri clamp flange size is 34 mm .
And the videos description there's a list of what I have roughly. I also did a buyer's guide video a couple months ago.
@@PortlyGentleman Awesome, I was more thinking about the inner/outer diameter of the silicon pipes ;)
@@j4nch I'm pretty sure it's 16x25mm
Damn to have the organization of your brewing area and set up. My current brewing area is a cluster fuck! Great demo video Bradley, cheers!
Thank you very much 🍻🍻🍻
Can the pump run at 100 ° C? I currently have a Hopcat system and the recommendation is not to start the pump above 80 ° C
I'm honestly not sure what the official recommendation is. I don't think it's really an issue The pump isn't running very long.
@@PortlyGentleman when you sterilize the cooler with hot wort, the pump pushes the wort into the cooler. So, the pump is running at 100°C?
Because even 10 seconds is enough to damage it.
@@Domogled I don't think so I did it with my old grainfather That things pump wasn't particularly impressive and never affected it. I haven't noticed any diminished function in my Brewtools pump.
@@PortlyGentleman thank you. 🍺🍺
Where do you order your parts?
I'm in the US so I get them directly from Brewtools. I think in the UK the Molt Miller is a reseller. I think there's a couple more but I'm not familiar with them.
Awesome. Thanks!
Anytime
They seem very small these tri clovers and very complicated setup with all these 3 ways. Cheers