Great video! Very helpful and detailed. Can you tell me how I get your version of the software? i have a hell of a problem with my 9-3 and just acquired a Tech2 diagnostic tool...I'm running outta options...
Hi im nee to using Tech 2. Just bought it. On a saab 9-3 year 2000 I fitted a second hand twice unit from the breakers yard. Along the way someone said I had to change the vin of the car I think to match the vin of the twice unit before I could program it in to the car. Then to change the vin back afterwards. Do you know anything about this? Heres the message I see on most screens. Wrong selection made! Please check selected model year. Or if there is an invalid vehicle identification number in DICE
When I first tried my tech two I plugged it into the candi module then plugged that into the obd. It said to me candi module detected. Please unplug. What?
Hi JonWise80 - thanks very much for this very helpful video. Could I ask where you got the Tech 2 itself and if you’re willing to say, how much you paid? I’m in the market for one and need some advice. Thanks!
Hi came across this video i have a 2011 Saab 9-5 that has some codes that need to clear try other code readers they don’t work how can I get a copy of TIS2000 your help would be appreciated thanks
If you can't clear the code with a standard reader, its probably a persistent code -- one that will stay there until the error condition is resolved. Even if you code remove it, it would pop back up. As far as getting TIS2000, with a 2011 you'd also need a subscription (they increased the security in the later models.) There are folks on the Facebook groups that can probably help you get around that.
Hi. Thanks for this video, I got huge help from it. Last night I finally found the tis2008-2. But I could'nt make it to type 2 or 3. Whatever I tried, It was not changed. Have any idea?
I also have a tech 2. Are you familiar with headlight leveling malfunction?! I had no issue whatsoever until I thought it was a good idea to calibrate the headlights by adding ahl and that when I got the message! Any help would be greatly appreciated .
How did you get your vin and car info to stay in tis2000? When I put in doesn't save and only lets me have type 3 access. How did you get it to give Type 1 access?
Hi buddy, i inheritted this saab 2004 and car is parked at my univeristy carpark at the min, key fob kinda melted inside and car not starting. i have got a tech2 machine from a friend and i have even got TIS 2008 original cd and i am hoping you will b able to help me with access dongle or point me in the right direction. please pm me
Um wait.. I'm confused.. my car isn't starting because the key needs to be reprogrammed... Somehow my key got disconnected from the security unit and the mechanic I bought it from said I would need a mechanic with a tech2 program to reprogram the key
Hi jonwise80 --- I am trying to find the adaptor for the serial port. The only thing holding me back. Laptop is all setup with software... thanks for any help
hello I can really use your help, I purchased an original OTC tech2 off my friend it as the Ver 32.002. when I turn on the tech2 it said you need to update your software, but i never got the TSI2000 web disc. Where can i get this software you using and will it work with my Ver 32.002 thanks
I've got a 2003 Saab 9-3 Arc. In order to add any module, I needed a computer running XP 32 bit and Tis2000 with Security Access along with a Tech2 and the Candi adaptor. Lots of handshaking. Good luck!
Hi jonwise80 how did you get the tech2 to work? II have a 2008 9-3 sportcombi aero and I am so stuck it drives me nuts. Could you add links to all the software you used and so on... Many thanks
I'm having trouble talking to my GM tech 2. I have a windows computer with windows 7 a GM tech 2 with a usb-serialport-ethernet and cant seem to get the computer and tech 2 talking. I also don't have the security access program inside my TIS2000 any way to point me in the right direction to get the files?
The serial adaptor is a real issue with the Tis2000. You need to get a USB adaptor that is verified to work. Check the forums and they'll link a few that have been confirmed.
Where do you get the software? I just purchased a Tech 2 clone and am having trouble getting everything set up. Do I NEED a Windows XP computer or will my MacBook Pro work?
I’m trying to migrate to my Mac book pro. I7. I’m using virtual box. With windows 10. Tis2000 will not install. Do I need to us the 32x windows 10 in a virtual setting? Any tips would be great.
Don't bother trying to get this running on a modern computer directly. You'll need to use a Virtual Machine (eg: VMWare Workstation/Fusion) with a Windows XP install. Ensure your USB-to-Serial adapter is connected to the VM. Here's all the bits you'll need: 1drv.ms/f/s!Av5IQUxnr8DUid4IV3QeHOTaBFNw9A
Funny nowadays at work we've got tis2web and that gives u access to what I believe is a tech2 emulator plus sps and some other things all via gm global connect
If you want a performance tune check out: www.saabecucloning.com/product/saab-9-3-trionic-8-ecu-tuning-upgrade Use code "UA-cam" to save 10% off your order. They also offer a Saab 9-3 ECU cloning service.
Great video! Very helpful and detailed. Can you tell me how I get your version of the software? i have a hell of a problem with my 9-3 and just acquired a Tech2 diagnostic tool...I'm running outta options...
Hi im nee to using Tech 2. Just bought it. On a saab 9-3 year 2000 I fitted a second hand twice unit from the breakers yard. Along the way someone said I had to change the vin of the car I think to match the vin of the twice unit before I could program it in to the car. Then to change the vin back afterwards. Do you know anything about this?
Heres the message I see on most screens.
Wrong selection made! Please check selected model year. Or if there is an invalid vehicle identification number in DICE
Do I need to connect my car in order for the security access to work and communicate with the tech2
When I first tried my tech two I plugged it into the candi module then plugged that into the obd. It said to me candi module detected. Please unplug. What?
Hi JonWise80 - thanks very much for this very helpful video. Could I ask where you got the Tech 2 itself and if you’re willing to say, how much you paid? I’m in the market for one and need some advice. Thanks!
Hi came across this video i have a 2011 Saab 9-5 that has some codes that need to clear try other code readers they don’t work how can I get a copy of TIS2000 your help would be appreciated thanks
If you can't clear the code with a standard reader, its probably a persistent code -- one that will stay there until the error condition is resolved. Even if you code remove it, it would pop back up.
As far as getting TIS2000, with a 2011 you'd also need a subscription (they increased the security in the later models.) There are folks on the Facebook groups that can probably help you get around that.
I have a saab 9-3 and I just purchased a Tech 2 I was wondering if you could help me with how to download TSI 2000. Thank you
Also recently purchased the 9-3 2006 I seem to be having some code issues how can you check to see if your ECU is good
hi, on my 900ng my 1997 which version of software for tech 2 should i get? i can only find .148
Hello,
Kindly explain the difference between tis2000 software and the tis2000 dongle.
Please, I really don't understand this
my saab z19dth automatic does not send any signal at diagnosys... any suggest? ecu dead?
where can I download your vmware with tis200 thanks
www.saabcentral.com/forums/showthread.php?t=665465
please explain the tis2000 security part
www.saabcentral.com/forums/showthread.php?t=665465
Hi. Thanks for this video, I got huge help from it. Last night I finally found the tis2008-2. But I could'nt make it to type 2 or 3. Whatever I tried, It was not changed. Have any idea?
Great video man, thanks for sharing the saab knowledge :)
I also have a tech 2. Are you familiar with headlight leveling malfunction?! I had no issue whatsoever until I thought it was a good idea to calibrate the headlights by adding ahl and that when I got the message! Any help would be greatly appreciated .
How did you get your vin and car info to stay in tis2000? When I put in doesn't save and only lets me have type 3 access. How did you get it to give Type 1 access?
I have access to a Bosch tech2 tool, but Saab is not showing up in the menu. do I need to purchase software or adapter for saab separately?
question what rs232 to USB are you using and where were you about to get the jailbroke software?
Hi buddy, i inheritted this saab 2004 and car is parked at my univeristy carpark at the min, key fob kinda melted inside and car not starting. i have got a tech2 machine from a friend and i have even got TIS 2008 original cd and i am hoping you will b able to help me with access dongle or point me in the right direction. please pm me
Why do you need a laptop? Can't you go from the Tech2 to the OBDIi port...?
Um wait.. I'm confused.. my car isn't starting because the key needs to be reprogrammed...
Somehow my key got disconnected from the security unit and the mechanic I bought it from said I would need a mechanic with a tech2 program to reprogram the key
Does anyone have a video or I do how to program the steering column /immo module?
I have a Tech 2 for Saab also, where did you get your version of tis software from? The TIS 2000?
Where can i get this cracked TIS? Do i need hadrware key or something to work with?
Does this work for a 2000 9-3?
Hi jonwise80 --- I am trying to find the adaptor for the serial port. The only thing holding me back. Laptop is all setup with software... thanks for any help
this one worked for me:
www.amazon.com/gp/product/B004MU7QUG/
do you need to re-connect the laptop everytime you program the same saab?Or does the tech 2 remember the security once put in?
From what I've used, it'll at least have security access for the last VIN permitted. It might keep it for more than one, though.
hello I can really use your help, I purchased an original OTC tech2 off my friend it as the Ver 32.002. when I turn on the tech2 it said you need to update your software, but i never got the TSI2000 web disc. Where can i get this software you using and will it work with my Ver 32.002 thanks
go to the saab forums you will get all the information you need.
Hey so I want to marry a new Pcm to my Saab. Would I still need the computer software Tis2000 if I buy a Saab tech 2 memory card ?
I've got a 2003 Saab 9-3 Arc. In order to add any module, I needed a computer running XP 32 bit and Tis2000 with Security Access along with a Tech2 and the Candi adaptor. Lots of handshaking. Good luck!
Where can I get a copy of tis 2000 hack
Hi jonwise80 how did you get the tech2 to work? II have a 2008 9-3 sportcombi aero and I am so stuck it drives me nuts. Could you add links to all the software you used and so on... Many thanks
What version of the TIS software did you get?
Where did you get your tech 2 if its a clone?
thanks for the video man!
what does it cost
Nice chair !
I'm having trouble talking to my GM tech 2. I have a windows computer with windows 7 a GM tech 2 with a usb-serialport-ethernet and cant seem to get the computer and tech 2 talking.
I also don't have the security access program inside my TIS2000 any way to point me in the right direction to get the files?
The serial adaptor is a real issue with the Tis2000. You need to get a USB adaptor that is verified to work. Check the forums and they'll link a few that have been confirmed.
2008-2009 is the latest cars you will have access to, that's when gm moved from software release CDs to the web, not 2000 as you stated on the video..
Where do you get the software? I just purchased a Tech 2 clone and am having trouble getting everything set up. Do I NEED a Windows XP computer or will my MacBook Pro work?
Loren Hatten run virtual windows
Are you looking to sell the Tech2?
I’m trying to migrate to my Mac book pro. I7. I’m using virtual box. With windows 10. Tis2000 will not install. Do I need to us the 32x windows 10 in a virtual setting? Any tips would be great.
Don't bother trying to get this running on a modern computer directly. You'll need to use a Virtual Machine (eg: VMWare Workstation/Fusion) with a Windows XP install. Ensure your USB-to-Serial adapter is connected to the VM.
Here's all the bits you'll need:
1drv.ms/f/s!Av5IQUxnr8DUid4IV3QeHOTaBFNw9A
hello can i use mdi interface with tech2 win sw for programing and sicurity acces
Do you do tech2 work for other saabs?
+patuy sure! if you're in my area, swing by. I'm on the Facebook group:
SAAB Customization Board! For Sharing Ideas And Constructive Criticism
Is this capable if diagnosing alarm issues? My alarm goes off all the time for no reason.
scorpiomaj27 there is an issue with the alarm module. Just goggle it, you'll find a way to fix it or send it to get fix and you don't need a Tech2
jonwise80 what state are you in?
I need a Tech2 in Houston.
Funny nowadays at work we've got tis2web and that gives u access to what I believe is a tech2 emulator plus sps and some other things all via gm global connect
@Jonwise80 TIS 2000 can run in MacBook OS?
If you want a performance tune check out:
www.saabecucloning.com/product/saab-9-3-trionic-8-ecu-tuning-upgrade
Use code "UA-cam" to save 10% off your order. They also offer a Saab 9-3 ECU cloning service.
nice 500 dollar tech2 clone from eBay, because what could possibly go wrong?
nothing, i`ve returned two genuine gm tech2 due to faulty soldering, ended up buying clone, never had a problem.
How do I obtain a tech 2 device and software...also what about the connectors involved can you buy those online