nice. thanks to you, now I know the position of supply pump shaft nut and the correlation with the SST needed to remove the supply pump. The SST is needed to avoid the nut to drop into the front cover but I think it could be done without the SST although must be really careful not to drop the nut. Thank you again.
teacher !! a master query!! I saw all your video and what I needed to see did not appear in the video 🥹🥹 the Turkish injection pump !! is it left or right to loosen? do you have that video part Pls 👏🏻👏🏻
teacher !! a master query!! I watched all your video and what I needed to see didn't appear in the video 🥹🥹 the injection pump nut!! is it left or right to loosen? do you have that video part Pls 👏🏻👏🏻
Sir tanong ko lang panu malaman kong mahina na ang supply pump toyoty hilux 2019..kasi napasukan ng tubi yong tangki nya..dapat ba malakas ang lomalabas na fuel galing sa supply pump papontang commonrail salamat
Kung ang tangke ng langis ay naghuhugas ng tubig, dapat na linisin ang tangke. Dapat palitan ang elektronikong fuel pump. Dapat palitan ang filter ng gasolina
you have to counterhold the crank pulley with SST (or any other method for example hold with used/old v-belt). for reference the tightening torque for the supply pump nut is 135Nm, but of course when loosening it would be harder especially with age.
The timing cover has a small cover in front of the pump. Open it and see if there are nuts in the pump. Open it. Then it will come out from the back side but the nut does not open easily
nice. thanks to you, now I know the position of supply pump shaft nut and the correlation with the SST needed to remove the supply pump. The SST is needed to avoid the nut to drop into the front cover but I think it could be done without the SST although must be really careful not to drop the nut. Thank you again.
thanks FOR comment sir
teacher !! a master query!! I saw all your video and what I needed to see did not appear in the video 🥹🥹 the Turkish injection pump !! is it left or right to loosen? do you have that video part Pls 👏🏻👏🏻
Good and helpful content!👍👍👍
Thanks for comment sir
Hola pregunta donde se encuentra ubicado el sensor de temperatura de combustible (diesel) de este motor?
teacher !! a master query!! I watched all your video and what I needed to see didn't appear in the video 🥹🥹 the injection pump nut!! is it left or right to loosen? do you have that video part Pls 👏🏻👏🏻
It will open to the left as normal normal bolts open And nuts should be heated with gas
@@Autoenginecheck thanks for your help let's heat that nut with fire 🔥 👏🏻👏🏻
Wow why what’s the problem?? Its new car
Black smoke was a problem thanks for comment sir
@@Autoenginecheck and that cause engine tear down?? My country doesn’t mandate DPF
Ashiq Khan Swabi auto workshop thakra mansehra ya Mira UA-cam channel ha ⚙️
Abu Dhabi m14
Al mona auto repair
Pretendo de uma placa.
Sir tanong ko lang panu malaman kong mahina na ang supply pump toyoty hilux 2019..kasi napasukan ng tubi yong tangki nya..dapat ba malakas ang lomalabas na fuel galing sa supply pump papontang commonrail salamat
Kung ang tangke ng langis ay naghuhugas ng tubig, dapat na linisin ang tangke. Dapat palitan ang elektronikong fuel pump. Dapat palitan ang filter ng gasolina
Thanks igan sa upload
thanks sir
Cara buka mur suplay pump
The supply pump nut is opened by heating the can with gas
you have to counterhold the crank pulley with SST (or any other method for example hold with used/old v-belt). for reference the tightening torque for the supply pump nut is 135Nm, but of course when loosening it would be harder especially with age.
طريقة فك ترس طلمبة الجاز
Fuel pump nat hit then open it
👍❤
Boss yan 2gd sa 2.4 ba or sa 2.8
2.4
Ilang kms bago palitan timing chains
Hindi ko pinalitan ang timing chain, nilinis ko ang diesel pump at mga injector
Semprot cairan apaa koq langsung bersih???
Ini bukan semprotan cair
Senapan bensin dan bensin
Yang keluar di bawah tekanan udara
Pake bensin pak
How to remove the nut of the lower chain
The nut can be heated with a gas lamp after remove
This is Toyota's over engineered built to fail engine from hell.
How to remove of nut of injection pump
The nut is heated with a gas lamp and the can is opened
Please how many oil litter does the engine take
7.5 Litter sir
@@Autoenginecheck thanks so much boss
How to remove the supply pump?
The timing cover has a small cover in front of the pump. Open it and see if there are nuts in the pump. Open it. Then it will come out from the back side but the nut does not open easily
Does removal of the supply pump affect timing?
@@Autoenginecheckdoes removal of supply pump affect timing?
@@ben2252 yes sir
@@Autoenginecheck meaning I must remove the front timing cover and do timing?