thank you so much......i called the linksys technicians and they were going to take $30 to help me do the same thing....may you be successful in this life and in the after life ..very grateful
I bought a refurb Linksys e900 and the CD was useless. I needed a fresh install and it was trying to link me to an existing network and had nothing about wires to my laptop so I knew there was a problem with their info. I found your video and was done in less than 10mins. Had a few problems when it came to the security screen due to differences in models but once you got me to that page I could find my way around. Thanks so much for a clear, concise video! :)
Thank you, thank you, thank you! Your video is still relevant in January 2017! Somehow, we lost the PW to our (ancient) router and your video helped me secure a new one for it. Thank you, Nick!
Very helpful video! Super useful as I'm reusing this years after I bought it and the setup instructions were thrown out years ago. Thanks for the help!
Thanks for coming back and leaving your feedback. Glad my video tutorial helped you out. Subscribe if you would like to see more videos like this one.👍😎
I'm still having trouble. My computer is on and I try and type it in just like this 192.168.1.1 And nothing happens, it doesn't navigate me anywhere and no password box comes up. What does this mean?
I have it connected like in this video. My computer recognizes the router, and I am able to access the setup. However, there is no connectivity for my desktop computer, the one that is directly connected to the router. Also, my Mac will pick up the wireless and I login, but there is no internet connectivity. Can you help please?
We always use the IPS address like you show at 2:17 but for some odd reason its not working at all so we can login by any chance did they change it since we wanted to add a NEW modem?
Whenever you change networks or Internet provider or move to a new house, you most likely will need to perform a repeater reset by using the RESET button (press and hold for a real 12-14 seconds) while it's plugged into a wall outlet and power is on, then release the RESET button and go through the setup steps again as shown in my video. Also try moving the Extender closer to where your router is located while setting it up, then you can move it if you need to. Also when setting it up double check that you are using the correct wifi password to connect to your router with the Extender during setting it up and again that it's close to the primary router during the setup and configuration steps.
We reset the button, got router and modem sitting beside us but nothing never happened at all except for WIFI cuts off when router plugged in and the IP address does not open up at all like you showed in video when that's what we are used to using. Unsure why nothing happened since all 3 devices are beside each other, we are on our 2nd modem.@@nickscomputerfix
I have a laptop with an internal wifi adapter, which enables me to view other wireless networks within reach. In regarding my desktop, can you recommend any resources where it would advise me how to setup an external router (without the Ethernet cable into the wall), to view wifi networks within reach? Your thoughts would be highly appreciated.
Is there a way to track data usage of devices connected to this router? I have TV, mobiles, laptops connected. Just want to know how much data consumption is happening.
Please tell me a good extender/repeater (under $30, or used and cheap, if possible) to improve the connection between my Roku in a nearby room and my Linksys router (probably model WRT120N). Thanks!
You can find this one for around $30. Go to my UA-cam channel nickscomputerfix and watch my video production titled: "Netgear n300 WiFi range Extender- Wifi Repeater Setup & reView - WiFi extender for Gaming"
also i have my router completely set up and working but on my windows 7 laptops on all 3 of them they say limited network access and it crashes my internet completely anytime i try connecting with those laptops would you know what to do to fix this problem?
Hey men, I have same router us your, but I can't access my router and the modem to connect to Internet. Their are connected the power for both the router and modem. My laptop connected also. Nothing working. I very confused about router. Is this give WI-FI or just a connection to other device? I have no idea about wifi and how to get them. So I research it pop up this Linksys N900 Smart WI-FI stuff. I really want wireless Internet to my home, so I thought bought Linksys today. Sorry for to long sentence. I just need help.
I have followed your video step by step, and I do fine until I get to the point to change the password and a box pops up to put the user name and pw in. I put in admin in both places and it does not accept them. I have reset the router at least 3 times. Any suggestions? I have to get this done because I have a strange computer showing up on my network map. I believe this person has gone in and changed the password while I was gone for the holidays, because when I came home my system was pw protected when it had not been when I left. help!!
I tried typing in that address on chrome. Said "webpage not available" I'm getting real frustrated, since I've been trying for DAYS to get the internet on my computer working.
I went through the video step by step and it appears my linksys router is producing a signal but once I connect my computer or phone to the wifi signal the Internet does not work. Any thoughts?
Nope. You can either use it as a Router or AP (Access Point). You might want to get a Extender/Repeater: "Netgear n300 WiFi range Extender- Wifi Repeater Setup & reView - WiFi extender for Gaming" ua-cam.com/video/CkNTIEHqTvg/v-deo.html
went there but it said i needed a cd or download for it to work? when i got the download finally it said my computer wasnt up to date (7.1.1 or later) but im already updated to 10.10.5..... wtf i just want wifi
***** When we connect to the WiFi network from our Linksys router, we can't access the internet even though the cable is plugged in. It is already setup, it has worked before. But now it wont. So to clarify; You can connect to it, but you can't get on the internet. Please help. It's driving me crazy!
your set up is ok now, just go to the 192.168.1.1 that he is talking about, type admin for password and if you are now in a set up page, click mac address clone, its a sub tab and there you enable the radio button and click Clone my PCs Mac and save settings and now you are good to go
After doing this I was asked to put in a user name and pw. It did not like what I was putting in. Am I suppose to put in the admin pw here or what??? thanks for helping.
Please help me sir and reply asap. I just need some help. I'm trying to install my cisco connect @ my windows 8 laptop and it always stuck @ 90% can you help me please? Pretty please? Just need some explanation to finish the installation. God bless and Good Day ! :)
everytime i enter the admin and admin pass it just takes me back to the same page??? i have linksys E1000 im trying to setup also i lost the setup cd is that required??? thanks
The setup CD is not required when doing it manually. I believe for your E1000 you need to leave the User ID space empty (blank) and only type in admin as the password. If that does not work, Google using keywords: linksys e1000 default password
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
thank you so much......i called the linksys technicians and they were going to take $30 to help me do the same thing....may you be successful in this life and in the after life ..very grateful
I bought a refurb Linksys e900 and the CD was useless. I needed a fresh install and it was trying to link me to an existing network and had nothing about wires to my laptop so I knew there was a problem with their info. I found your video and was done in less than 10mins. Had a few problems when it came to the security screen due to differences in models but once you got me to that page I could find my way around. Thanks so much for a clear, concise video! :)
Thank you, thank you, thank you! Your video is still relevant in January 2017! Somehow, we lost the PW to our (ancient) router and your video helped me secure a new one for it. Thank you, Nick!
:-)
Worked to perfection. This saved time and money, as well as a frustrating call center call. Many thanks.
many thanks for the clear and easily follow-able video
Your video really helped me assist my parents' router setup over the phone.
Thanks so much and keep up the fantastic work!
This video was incredibly helpful and insightful, as well as easy to follow. Well done. Thank you!
Glad it was helpful!
@@nickscomputerfix Ya probably didn't think this could still help someone, but it did. The power of the Internet & UA-cam. Thanks again
Thank you very much. Had trouble finding information about the default username/password till this video.
Thank you! You saved me hours of frustration!
This helped out very much. I was trying to figure out what I was doing wrong, and this cleared things right up; thanks!
you"re right miss jeniffer ebare,,, this is what we're looking for ,,,
Absolutely sir!
Very helpful video! Super useful as I'm reusing this years after I bought it and the setup instructions were thrown out years ago. Thanks for the help!
You're welcome.👌😎
Thanks for making this so easy to understand
Thank you, very easy and perfect way to install
Glad it helped
Very educational + helpful. Thank you so much Nick.
Thanks Nick. :)
Thanks for coming back and leaving your feedback. Glad my video tutorial helped you out. Subscribe if you would like to see more videos like this one.👍😎
Thanks a lot!! Thanks to you I could reconfigure my router!!
Worked perfectly! Thanks Nick!!!!!
Does the router have to stay connected to the modem?
By the way I finally found a video looking for which was this 1 thank you
Thank you so much man. That helped me out a lot.
you can reset your router.
by long pressing the reset button.
thanks
Thank You !This is correct and easy!
I'm still having trouble. My computer is on and I try and type it in just like this
192.168.1.1
And nothing happens, it doesn't navigate me anywhere and no password box comes up. What does this mean?
Reset your router, it works. My internet guys gave up, after following videos able to use cico linksys router
don't you need an installation disk? usually comes with the router?
when do i get the pin... i can't put a password
Will this work for all linksys routers? I just bought a linksys e2500. Very informative either way!
This was very helpful, thanks!
When i plug it into my laptop it is connected but there is no internet access
#9 Same
How did u fix it
sameeeeee
Your video was very helpful thank u
Extremely helpful! Thanks.
Nick, once this is all set up can I then remove the ethernet (blue cable) from my laptop?
It worked! Thank you 🙏🏻
Thank you this helped a lot now I have access to my ps4
Thanks for the very simple to follow explanation.
Great video. Thank you very much.
Thanks man, perfect video, thanks again.
Thank you so so much
Would it be the same if our internet service has a password already?
Very useful, thank you !
Thanks Nick! Very helpful....
I have it connected like in this video. My computer recognizes the router, and I am able to access the setup. However, there is no connectivity for my desktop computer, the one that is directly connected to the router. Also, my Mac will pick up the wireless and I login, but there is no internet connectivity. Can you help please?
Thank you very much for this video.
We always use the IPS address like you show at 2:17 but for some odd reason its not working at all so we can login by any chance did they change it since we wanted to add a NEW modem?
Whenever you change networks or Internet provider or move to a new house, you most likely will need to perform a repeater reset by using the RESET button (press and hold for a real 12-14 seconds) while it's plugged into a wall outlet and power is on, then release the RESET button and go through the setup steps again as shown in my video. Also try moving the Extender closer to where your router is located while setting it up, then you can move it if you need to. Also when setting it up double check that you are using the correct wifi password to connect to your router with the Extender during setting it up and again that it's close to the primary router during the setup and configuration steps.
We reset the button, got router and modem sitting beside us but nothing never happened at all except for WIFI cuts off when router plugged in and the IP address does not open up at all like you showed in video when that's what we are used to using. Unsure why nothing happened since all 3 devices are beside each other, we are on our 2nd modem.@@nickscomputerfix
I have a laptop with an internal wifi adapter, which enables me to view other wireless networks within reach. In regarding my desktop, can you recommend any resources where it would advise me how to setup an external router (without the Ethernet cable into the wall), to view wifi networks within reach? Your thoughts would be highly appreciated.
We got a new computer(a laptop) and i need to know how do you connect it WITHOUT A modem wireless away from the PC. please help
Thank you, kind sir! Grateful.
You're very welcome!
if i have 4 access point for same router and i want to put diffrent password for each access ?
Is there a way to track data usage of devices connected to this router? I have TV, mobiles, laptops connected. Just want to know how much data consumption is happening.
I believe you can see that in advance router settings....depending on which firmware version you are running under.
Please tell me a good extender/repeater (under $30, or used and cheap, if possible) to improve the connection between my Roku in a nearby room and my Linksys router (probably model WRT120N). Thanks!
You can find this one for around $30. Go to my UA-cam channel nickscomputerfix and watch my video production titled: "Netgear n300 WiFi range Extender- Wifi Repeater Setup & reView - WiFi extender for Gaming"
Really helpul. Thanks a lot.
i have to plug an Ethernet cord in both internet and 1-4 ports in order to get wifi connection.Why is this?help please
what you connect but wont let you view any websites
also i have my router completely set up and working but on my windows 7 laptops on all 3 of them they say limited network access and it crashes my internet completely anytime i try connecting with those laptops would you know what to do to fix this problem?
i just want to appreciate.
thanks
bhai jan reset mara linksys modem ko ab doubara setting kesyb karen
can you plz reply nick....something is wromg with my router and I can't fix it. no internet is coming out of it but it's saying connected
Thanks! Very helpful!
Thank you for the video great great great video thank you
thanks, this was very useful!!!
Hey men, I have same router us your, but I can't access my router and the modem to connect to Internet. Their are connected the power for both the router and modem. My laptop connected also. Nothing working. I very confused about router. Is this give WI-FI or just a connection to other device? I have no idea about wifi and how to get them. So I research it pop up this Linksys N900 Smart WI-FI stuff. I really want wireless Internet to my home, so I thought bought Linksys today. Sorry for to long sentence. I just need help.
Good day!
how do you change the admin + admin username and password?
Great video.
should i have a host name or is it just optional?
thank you great video
thats a great video to learn
my cable modem has already wifi, can i still configure my links wireless router?
I can not change my security mode it keeps going back to disabled.......what should I do? Plz help if you can?
my e900 router just stops working it wont any device to connect to it, any help please?
you can just reset it in the back in the small red button and hold it for 40 seconds
Thank you
Awesome! Thank you!!!
if i put admin in for both it brings me back to login part
I have followed your video step by step, and I do fine until I get to the point to change the password and a box pops up to put the user name and pw in. I put in admin in both places and it does not accept them. I have reset the router at least 3 times. Any suggestions? I have to get this done because I have a strange computer showing up on my network map. I believe this person has gone in and changed the password while I was gone for the holidays, because when I came home my system was pw protected when it had not been when I left. help!!
Hold the reset button for 10 seconds before following steps.
i think all that cant acces the default ip should reset their router.. it will go basically to that ip..
thanks! helped alot!
I tried typing in that address on chrome. Said "webpage not available"
I'm getting real frustrated, since I've been trying for DAYS to get the internet on my computer working.
Why is it when I type 192. address I have to insert the cd only
thank you
great video, thanks for sharing that.
Thank youu sooo much!!
Very nice 👍
I went through the video step by step and it appears my linksys router is producing a signal but once I connect my computer or phone to the wifi signal the Internet does not work. Any thoughts?
Reset your Internet modem. Have your ISP do a test to see if they can see your router by way of your Internet modem.
i put in admin for both username and password but it did not work
it is telling that it coudnt found and does its adress has been changed sorry for my english
I have a problem with my (WRT54G) linksys router , becuase its frameware is not in english also i cant get an english frameware for this model...
Hmmm...I see a firmware update in English. All I did was Google with keywords: wrt54g firmware update
wont let me in and I cant rememeber what I left it as since I haven't used this in 2 years
Cool. Thanks!
can you wifi repeat with this router?
Nope. You can either use it as a Router or AP (Access Point). You might want to get a Extender/Repeater: "Netgear n300 WiFi range Extender- Wifi Repeater Setup & reView - WiFi extender for Gaming" ua-cam.com/video/CkNTIEHqTvg/v-deo.html
nickscomputerfix thank you for the help and fast reply
went there but it said i needed a cd or download for it to work? when i got the download finally it said my computer wasnt up to date (7.1.1 or later) but im already updated to 10.10.5..... wtf i just want wifi
***** When we connect to the WiFi network from our Linksys router, we can't access the internet even though the cable is plugged in. It is already setup, it has worked before. But now it wont. So to clarify; You can connect to it, but you can't get on the internet. Please help. It's driving me crazy!
your set up is ok now, just go to the 192.168.1.1 that he is talking about, type admin for password and if you are now in a set up page, click mac address clone, its a sub tab and there you enable the radio button and click Clone my PCs Mac and save settings and now you are good to go
+superswede97 see internet status , make it dhcp
After doing this I was asked to put in a user name and pw. It did not like what I was putting in. Am I suppose to put in the admin pw here or what??? thanks for helping.
Adium for both Username and Password
Admin*
thanks alot
Please help me sir and reply asap. I just need some help. I'm trying to install my cisco connect @ my windows 8 laptop and it always stuck @ 90% can you help me please? Pretty please? Just need some explanation to finish the installation. God bless and Good Day ! :)
what is the point of the router if it right next to the main router?
Cobruh that big one is not a router that is a modem
everytime i enter the admin and admin pass it just takes me back to the same page??? i have linksys E1000 im trying to setup also i lost the setup cd is that required??? thanks
The setup CD is not required when doing it manually. I believe for your E1000 you need to leave the User ID space empty (blank) and only type in admin as the password. If that does not work, Google using keywords: linksys e1000 default password
***** will do thanks for the reply :)
Thanks, Nick, but when I enter 192.168.1.1, it opens up the settings for my DSL modem, not my router. Any suggestions?
Is your DSL modem and router one unit?
Wow. That was fast.
No, I have separate modem and router.
Go to a Command Prompt > type: ipconfig > see what your Default Gateway IP address is and try that one.
Thanks, Nick. That helped. It was not the usual IP address.
:-)
thank you !!!!!
How to setup without modem ?