I bought my son the same one today and it wouldn’t work, needless to say he was very disappointed. I went back and bought a new one for him. I wish I watched your video first, thanks great info
I found one of these for 3 bucks at the thrift store. It doesnt have a battery or mag, i hooked it up to a 9v battery but it didnt do anything Can you hook yours to a 9v battery and see if yours works. Id like to know before i buy a new battery
As I showed in my video, if you take out your magazine, look down through the little magazine feeder and pull the trigger. Do you see the internals moving when you pull the trigger?
@@1litlildave then my best bet is that somewhere inside the gearbox there is a dehydrated ball preventing it from sliding all the way back so the next bullet can load in recently. I went out with my buddies, and I used my gun for a little bit. Forgot it in my truck and I did notice that there were some dehydrated bullets inside the magazine, so I might have to take my gun apart againand check it out, but if there is something in it then I’ll take it apart and I’ll do another video
i hydrated my orbeez for a long time , also i haven’t used my splatrball gun in like a month when i go to use it only a little bit of orbeez come out every like 20 -30 shots the mag wheel won’t shoot the orbeez up what do i do?
Hi, when you say the mag won’t shoot the Orby’s up, are you talking about the little gear inside? The magazine won’t spin to feed the boards up or it is spinning and feeding the bullets up into the gun, but it is not chambering around.
You might have to check the connections on the magazine and see if they are bent so they won’t be able to reach the other connections on the inside of the magazine well or if there is something blocking the springs from the inside of the gun to make contact with the magazine
To me it sounds like the same issue I had you’re just gonna have to keep searching all around inside the gearbox until you find it unless it’s stuck in the gears
The thing is one gel comes out every like 6 shots, so I think sometimes the hammer goes back but most of the time it doesn’t. I don't know what determines if the hammer goes back or not
@@P0rkch0p999 see I had that issue as well where it would sometimes shoot a couple bullets, but sometimes wouldn’t the reason was is sometimes the gel bullets aren’t all exactly the same size. They’re a little bit different depending on how long they’ve been out of water and not all of the gel bullets are exactly identical to the same size of each other so sometimes they’re a little bit bigger sometimes they’re a little bit smaller, but the hammer not going all the way back is what helps not feed bullets into it so in the video what I would suggest to try figuring out is if you hold the gun upside down with the magazine out of the gun and put it on fire and just keep tapping the trigger slowly to see if the hammer goes all the way back and then goes all the way forward and if it doesn’t go all the way back that does prove that there’s something preventing it from going all the way forward
@@P0rkch0p999 good job fixing your other problem. The only thing that I can think of to fix this problem is if you either put new fresh ammo in that has had the designated time of soaking so the bullets are the right size. Or see if you’re buddies or friends or whoever else has the same gun as you if you can borrow there magazine and try that.
When I shoot mine it will cycle but then shoot 6 and stop. Then when I put a light up to the mag then shoot,The gel balls would break when they cycle. What should I do?
Have you taken your gun apart and it did anything to it like I did because it sounds like a similar problem that I had which I showed in my video about the dehydrated ball getting stuck inside of the piston part that shoots in marches the ball out
Very cool. I'm thinking about getting one of these to help alleviate a cat problem I have. I wonder if it would screw up the function of the gun if the water I use to hydrate the gel bullets came from well rotted cabbage and filter all the particles out of it. Would that make the gel bullets stink and would it screw up the gun?
Maybe try taking your magazine out of the rifle hold it upside down with a flashlight so you’re looking down through the magazine well on the gun and lightly tap the trigger so you can see the internals moving front to back to see if the bullets have enough space to pass through the loading tube if not, then I would probably suggest that you do have a dehydrated ball somewhere inside there
So I do not have my gun taken apart in front of me. I just went into my video and took a screenshot and I am going to post that on my community page so you can see how the magazine one clips
What do you mean it cuts out and doesn’t shoot? Are you saying that your gun shoots but sometimes it doesn’t launch some of the bullets and then other times it does launch the bullets.
It might be the same issue that I had where a dehydrated Orby got stuck inside the gearbox, preventing the hammer to go all the way back to let you load another bullet in, and if not that then your magazine might not be feeding the bullet up through the magazine into the gun
@@Luh_Ace. when you say you have the hammer problem, I am taking it as everything works perfectly fine with the gun. It’s just not going far enough back for the boats to slide up into it to get launched out so most likely this video will help you solve the problem.
@@MercyBanisher3 it might just be up the magazine has to have contact with the two spring connectors inside the magazine well because that gives it power to the magazine, so your magazine will automatically load the bullets up to the gun
hey homie, i got two splatr ball guns and both are having issues, one whines super loud and the other, the gears will spin slowly in the mag for like 2 seconds then it completely stops when i try to shoot it. I understand the gears are probably stripped in the first one, or it may be a hammer issue, but my other gun, the srb1200, i dont understand the issue, it literally just stops doing anything lol
I would maybe recommend seeing if you can talk to any of your friends that have the same gun as you if you just need a new battery that your current battery doesn’t hold his charge anymore not check the connectors where the mag connects into the gun to see if the terminals are dirty or if if there’s anything obstructing it
@@solarogx7476 I would recommend yes because depending on the ammo you buy there is a recommended amount of time they need to soak for which the normal SRP ammo is three hours if they soak anything under the required amount, then the balls or bullets won’t be the correct size so it might affect the gun
I honestly don’t know exactly why that is happening but it sounds like it would have to be something with the gear box so you might have to take a look internally. What I would try to do is try to connect the battery and have the gun taken apart so you can see the internals work as you try to pull the trigger to see if anything is stuck or preventing it from shooting. But I will try to find out and look in to it and I will try to let you know my findings. Good luck
Not 100% sure but it might have something to do with the internal mechanism that allows you to switch between semi automatic to full auto. Maybe one of the gears on the inside that allows you to switch between the three of settings is missing some teeth or got loose.
@@februaryy-1 I’m not 100% sure you could try finding out what’s wrong maybe even opening the gun up and seeing if there’s any loose wires to start with
@@siahupnextt if you take your magazine out, hold the gun upside down look in the magazine well and pull the trigger. Can you see the hammer moving back-and-forth?
@@siahupnextt when you pull the trigger does the gunmaker VRNNN sound internally because if so, and it is high-pitched that means you might’ve chewed up your teeth on the gear, but if it doesn’t move at all and it doesn’t make a sound either something is inside where your motor is trying to move it and it is stuck or wire came undone
Off the top of my head, I don’t remember using any bits in these videos. The only thing I can think of is a Phillips screwdriver but when I get home, I will rewatch the video to refresh my memory.
Hey man I have a 11.1 v battery and one day I put it in and it won’t come un done my dad tried and my mom it will not un plug and it gets hot when I shoot it and also there’s a gel ball jammed in it I can see it do you have any tips to help?
If you watch my first video on where I found my gel ball that was jamming my gun and how I troubles shot it to find out whereabouts it was located. Try doing that if you pull the trigger and nothing moves it might be in the gearbox, but if everything moves, but it just doesn’t slide all the way front it might be around the same area where mine was in the video.
@@therevenantmain3440 don’t feel dumb. Everyone makes this mistake but don’t quote me on it. I’m not 100% sure if that is the issue but usually if you have a different polarity, it makes everything run in reverse so instead of the positive being on the positive wire it’s the negative on the positive and positive on the negative
@@Akababym4 take the magazine out of the Maxwell hold the gun upside down look into the mag well pull the trigger. Do you see the hammer moving back-and-forth? If so, then check if the gear inside your magazine moving when you hit the trigger if so, the only option would be that there’s something inside of your gun shown in the video preventing the hammer from going all the way back to take the next bullet.
I’m not 100% sure on what the issue could be could either be that the gear inside of the gearbox the teeth broke off of it so it just spins and it doesn’t move or your motor isn’t working
As far as right now, the only thing that I can think of that is preventing your gun from firing is, if the hammer doesn’t go all the way back to load a bullet into it to fire it or your magazine have a good connection to feed the bullets upinto the gun
Hi Manuel I just posted a picture on my community page for my UA-cam channel check that out. I hope it helps you if not, let me know and I will make a short video and show you how to.
Of course, I couldn’t find any answers on my mind stopped working, so I took it upon myself found out what was wrong posted a video on my channel to help others that were in my shoes. Glad to help anyway, I can
To me, it sounds like your magazine might not have a good connection to the battery terminals inside the mag well see if there’s anything obstructing it or if the springs on the inside is bent a little bit
I made a Instagram account for my UA-cam channel
@YTAustinAce
I bought my son the same one today and it wouldn’t work, needless to say he was very disappointed. I went back and bought a new one for him. I wish I watched your video first, thanks great info
@@kevinb1060 any time hope it works
It works great now, but now he has two of them
@@kevinb1060 sounds like a lot of fun
It took awhile to find it, but your video answered my problem before I opened the gun. No doubt the problem. Thanks. 👍🏻
That’s awesome. Congrats on fixing your problem.
How to fix my gun if it shoot and no bullets come out is it my clip or gun
I found one of these for 3 bucks at the thrift store. It doesnt have a battery or mag, i hooked it up to a 9v battery but it didnt do anything
Can you hook yours to a 9v battery and see if yours works. Id like to know before i buy a new battery
I was shooting mines it randomly stopped shooting my gear spins and my trigger stays back but it doesn’t shoot
As I showed in my video, if you take out your magazine, look down through the little magazine feeder and pull the trigger. Do you see the internals moving when you pull the trigger?
@@AustinAceyes but nothing comes out
@@1litlildave then my best bet is that somewhere inside the gearbox there is a dehydrated ball preventing it from sliding all the way back so the next bullet can load in recently. I went out with my buddies, and I used my gun for a little bit. Forgot it in my truck and I did notice that there were some dehydrated bullets inside the magazine, so I might have to take my gun apart againand check it out, but if there is something in it then I’ll take it apart and I’ll do another video
i hydrated my orbeez for a long time , also i haven’t used my splatrball gun in like a month when i go to use it only a little bit of orbeez come out every like 20 -30 shots the mag wheel won’t shoot the orbeez up what do i do?
Hi, when you say the mag won’t shoot the Orby’s up, are you talking about the little gear inside? The magazine won’t spin to feed the boards up or it is spinning and feeding the bullets up into the gun, but it is not chambering around.
@@AustinAce yes the little gear ⚙️ the wheel won’t shoot the orbeez up
You might have to check the connections on the magazine and see if they are bent so they won’t be able to reach the other connections on the inside of the magazine well or if there is something blocking the springs from the inside of the gun to make contact with the magazine
Can you help me? The hammer isn’t going all the way back when I shoot but when I checked their was no dryer gellets blocking it?
To me it sounds like the same issue I had you’re just gonna have to keep searching all around inside the gearbox until you find it unless it’s stuck in the gears
The thing is one gel comes out every like 6 shots, so I think sometimes the hammer goes back but most of the time it doesn’t. I don't know what determines if the hammer goes back or not
@@P0rkch0p999 see I had that issue as well where it would sometimes shoot a couple bullets, but sometimes wouldn’t the reason was is sometimes the gel bullets aren’t all exactly the same size. They’re a little bit different depending on how long they’ve been out of water and not all of the gel bullets are exactly identical to the same size of each other so sometimes they’re a little bit bigger sometimes they’re a little bit smaller, but the hammer not going all the way back is what helps not feed bullets into it so in the video what I would suggest to try figuring out is if you hold the gun upside down with the magazine out of the gun and put it on fire and just keep tapping the trigger slowly to see if the hammer goes all the way back and then goes all the way forward and if it doesn’t go all the way back that does prove that there’s something preventing it from going all the way forward
So I fixed all that, now my only problem is the gun only shoots upside and it shoots perfectly upside. Do you know how to fix that?
@@P0rkch0p999 good job fixing your other problem. The only thing that I can think of to fix this problem is if you either put new fresh ammo in that has had the designated time of soaking so the bullets are the right size. Or see if you’re buddies or friends or whoever else has the same gun as you if you can borrow there magazine and try that.
When I shoot mine it will cycle but then shoot 6 and stop. Then when I put a light up to the mag then shoot,The gel balls would break when they cycle. What should I do?
Have you taken your gun apart and it did anything to it like I did because it sounds like a similar problem that I had which I showed in my video about the dehydrated ball getting stuck inside of the piston part that shoots in marches the ball out
Very cool. I'm thinking about getting one of these to help alleviate a cat problem I have.
I wonder if it would screw up the function of the gun if the water I use to hydrate the gel bullets came from well rotted cabbage and filter all the particles out of it.
Would that make the gel bullets stink and would it screw up the gun?
What the fuck
Are u on?
So I looked in the blue hole and there was no dehydrated gel beads in there.My Srb 400 is still having feeding problems though any suggestions?
Maybe try taking your magazine out of the rifle hold it upside down with a flashlight so you’re looking down through the magazine well on the gun and lightly tap the trigger so you can see the internals moving front to back to see if the bullets have enough space to pass through the loading tube if not, then I would probably suggest that you do have a dehydrated ball somewhere inside there
How do i put the orange magazine spring back
please respond
So I do not have my gun taken apart in front of me. I just went into my video and took a screenshot and I am going to post that on my community page so you can see how the magazine one clips
My gun only shoots sometimes but it cuts out and doesn’t shoot, you can sometimes hear the gear or motor but I does not shoot. Please help
What do you mean it cuts out and doesn’t shoot? Are you saying that your gun shoots but sometimes it doesn’t launch some of the bullets and then other times it does launch the bullets.
@@AustinAceyea mine does that why
Hi there, when I shoot the trigger the gun make the sound and I can feel the air come out, but no bullets come out.
It might be the same issue that I had where a dehydrated Orby got stuck inside the gearbox, preventing the hammer to go all the way back to let you load another bullet in, and if not that then your magazine might not be feeding the bullet up through the magazine into the gun
@@AustinAcei have the hmer problem
@@Luh_Ace. when you say you have the hammer problem, I am taking it as everything works perfectly fine with the gun. It’s just not going far enough back for the boats to slide up into it to get launched out so most likely this video will help you solve the problem.
Is the gun suppose to let balls out consistently? Every shot? Bc my wont what do I do?
Did u mod you gun in any way
How long did the bullets soak for
I got the blue one it shoots but the orbeez is not coming out did I break it?
@@MercyBanisher3 it might just be up the magazine has to have contact with the two spring connectors inside the magazine well because that gives it power to the magazine, so your magazine will automatically load the bullets up to the gun
@@AustinAce ok thanks
hey homie, i got two splatr ball guns and both are having issues, one whines super loud and the other, the gears will spin slowly in the mag for like 2 seconds then it completely stops when i try to shoot it. I understand the gears are probably stripped in the first one, or it may be a hammer issue, but my other gun, the srb1200, i dont understand the issue, it literally just stops doing anything lol
I would maybe recommend seeing if you can talk to any of your friends that have the same gun as you if you just need a new battery that your current battery doesn’t hold his charge anymore not check the connectors where the mag connects into the gun to see if the terminals are dirty or if if there’s anything obstructing it
Do I really have to soak the bullets for 4 hours because I soaked em u till they look ready and the gun barely shoots
@@solarogx7476 I would recommend yes because depending on the ammo you buy there is a recommended amount of time they need to soak for which the normal SRP ammo is three hours if they soak anything under the required amount, then the balls or bullets won’t be the correct size so it might affect the gun
Update 100000% soak for 4 hours
Very useful and informational thank youuuu
Thank you means a lot here to help
how do i fix when it the trigger just stays back and it just wont shoot when i try to shoot it it just doesn't shoot and the trigger stays back?
I honestly don’t know exactly why that is happening but it sounds like it would have to be something with the gear box so you might have to take a look internally. What I would try to do is try to connect the battery and have the gun taken apart so you can see the internals work as you try to pull the trigger to see if anything is stuck or preventing it from shooting. But I will try to find out and look in to it and I will try to let you know my findings. Good luck
Fix the spring, it’s probably miss placed
@@ttommy281 how do you go about doing that. i pull the trigger on semi and it works, on full auto it maybe shoots 4 sometimes
@@urinesoakedtroglodyte5764 oh then idk
hey my gun doesn’t shoot when its in fully automatic and i dont know how to fix it
Not 100% sure but it might have something to do with the internal mechanism that allows you to switch between semi automatic to full auto. Maybe one of the gears on the inside that allows you to switch between the three of settings is missing some teeth or got loose.
@@AustinAce so what would i have to do, do i unscrew it n find whats wrong
@@februaryy-1 I’m not 100% sure you could try finding out what’s wrong maybe even opening the gun up and seeing if there’s any loose wires to start with
only the clips wheel that feeds the beads spin, but the actual gun wont take the beads and shoot
@@siahupnextt if you take your magazine out, hold the gun upside down look in the magazine well and pull the trigger. Can you see the hammer moving back-and-forth?
@@AustinAceno its wont move
@@siahupnextt when you pull the trigger does the gunmaker VRNNN sound internally because if so, and it is high-pitched that means you might’ve chewed up your teeth on the gear, but if it doesn’t move at all and it doesn’t make a sound either something is inside where your motor is trying to move it and it is stuck or wire came undone
My gear in the mag spins but doesn’t push the orbees all the way out
Do u have enough ammunition
Are they fresh ammo
@@AustinAce yes it’s full. I have to put the gun upside down to shoot it
@@selogee if you hold the gun upright like in normal position and go to shoot, does a shoot out fragments sometimes for nothing at all or both
I opened mine and I saw that the metal thing connected to the gears was broken and the gears were striped
you would have to buy and replace or buy a new gun
Yea there no replacement part do I just bought a new gun😢
@@Satisfying-details that stinks
Which size bit did you use?
Off the top of my head, I don’t remember using any bits in these videos. The only thing I can think of is a Phillips screwdriver but when I get home, I will rewatch the video to refresh my memory.
👍
Hey man I have a 11.1 v battery and one day I put it in and it won’t come un done my dad tried and my mom it will not un plug and it gets hot when I shoot it and also there’s a gel ball jammed in it I can see it do you have any tips to help?
If you watch my first video on where I found my gel ball that was jamming my gun and how I troubles shot it to find out whereabouts it was located. Try doing that if you pull the trigger and nothing moves it might be in the gearbox, but if everything moves, but it just doesn’t slide all the way front it might be around the same area where mine was in the video.
Mine like makes a clicking sound when i it on but doesnt shoot
There might be some thing stuck inside the motor jamming it, so it wouldn’t move
What if the gear spins backwards?
If the gear spins backwards, and that probably just means the power is in the wrong position, meaning flip the battery
@@AustinAce I feel so dumb😭 I had spent three hours disassembling it just for the battery to be in the wrong position. Thank you
@@therevenantmain3440 don’t feel dumb. Everyone makes this mistake but don’t quote me on it. I’m not 100% sure if that is the issue but usually if you have a different polarity, it makes everything run in reverse so instead of the positive being on the positive wire it’s the negative on the positive and positive on the negative
When I pull the trigger it’s nothing coming out of it
@@Akababym4 take the magazine out of the Maxwell hold the gun upside down look into the mag well pull the trigger. Do you see the hammer moving back-and-forth? If so, then check if the gear inside your magazine moving when you hit the trigger if so, the only option would be that there’s something inside of your gun shown in the video preventing the hammer from going all the way back to take the next bullet.
My gun just makes a whine like a brr
@@masonm2140 yes to me that sounds like your gear is stripped so you should probably just need a new gear
yo my issue is i js shoot it w out the gels and it sounds so quiet
I’m not 100% sure on what the issue could be could either be that the gear inside of the gearbox the teeth broke off of it so it just spins and it doesn’t move or your motor isn’t working
@@AustinAce how could i open it
my gun doesn’t shoot at all but when i use my battery in every other gun it works so idk
@@jaydiffrnt what on your gun doesn’t work?
@@AustinAce the gun doesn’t shoot at all and i think it’s the battery or it has water damage
@@jaydiffrnt I would probably try by getting a new battery and try that out to see if that’s the issue
How to fix my gun if it shoot and no bullets come out
As far as right now, the only thing that I can think of that is preventing your gun from firing is, if the hammer doesn’t go all the way back to load a bullet into it to fire it or your magazine have a good connection to feed the bullets upinto the gun
It doesnt shoot like when I pull the trigger it doesnt want to shoot
Silly question is the battery charge and if it is, is it plugged in?
Does it try to make stuff move or sound like it wants to shoot?
no
@@AustinAceyes
It jus sound like vrrrrrrrrrrrrrrrrm
and the stock button
Hi Manuel I just posted a picture on my community page for my UA-cam channel check that out. I hope it helps you if not, let me know and I will make a short video and show you how to.
I recorded a video about me taking apart my gun and showed you how to attach it. It will be posted tonight when I get out of work.
@@AustinAce Ok thanks
thnxxxxxxxxxxx
Of course, I couldn’t find any answers on my mind stopped working, so I took it upon myself found out what was wrong posted a video on my channel to help others that were in my shoes.
Glad to help anyway, I can
pleassee help
Hi Manuel sorry about the wait but just posted the video. :)
Can you help I charge my battery and then I put the battery in the gun and I test it the mag motor spins for a second then it stop do u know why
To me, it sounds like your magazine might not have a good connection to the battery terminals inside the mag well see if there’s anything obstructing it or if the springs on the inside is bent a little bit
Mines won’t even make a noise it’s just not working
Edit* I need help someone help me