Ukraine War Welders Make Body Armor from old Car Springs

Поділитися
Вставка
  • Опубліковано 4 лис 2024

КОМЕНТАРІ • 23

  • @gamecubekingdevon3
    @gamecubekingdevon3 2 роки тому +14

    do not forget to wrap the steel in dozen layers of some synthetic fabric (polyester, nylon, aramid, etc) to catch the fragmentation however.

  • @g-pawmikey5508
    @g-pawmikey5508 Рік тому +6

    For those concerned about the spalling issue look at the plate in the carrier 1:44 it looks to be wrapped in some material. The Ukrainians are fighting for their very existence and are amazingly innovative as well as courageous!

    • @BasedF-15Pilot
      @BasedF-15Pilot Рік тому

      Amazing how 'metal plate are targets only' and 'spalling will kill you' until it's in glorious Ukraine then it's all the sudden 'lololol its wrapped totally as good as lvl IV ceramic slava ukraine' you people are fake as hell.

  • @dougcurtis9633
    @dougcurtis9633 2 роки тому +21

    That might stop a round, but the spawling fragmentation will be very bad, maybe even more deadly if it strikes the neck and head and lower extremities

    • @bsouza4441
      @bsouza4441 2 роки тому +5

      Spalling protection is easy to do as well. Some layers of Rubber and some adesive or super glue wors.

    • @Ukraineaissance2014
      @Ukraineaissance2014 2 роки тому +2

      They make the plate carriers with kevlar because steel plates are what 90% of them use. This stops sprawling. They also have some sort of cover on the metal

    • @NyxtoX6
      @NyxtoX6 Рік тому +5

      Well its better than nothing at all

    • @g-pawmikey5508
      @g-pawmikey5508 Рік тому +1

      It appears at 1:44 the plate inserted in the carrier has some material wrapped around the plate as the texture doesn'tlook like steel. You are spot on about spalling...

    • @justinmurray4652
      @justinmurray4652 Рік тому +2

      I'd want a metal lip to deflect spall for sure.

  • @richbattaglia5350
    @richbattaglia5350 Рік тому +4

    A suggestion for more mobile troops. A composite armor with a porcelain tile front, fiberglass layers crossweaved at 45 degrees, and a light metal backer.
    This will reduce weight significantly when compared to metal alone. Weight reduction at the cost of plate longevity.
    Depending on the thickness of the improvised plate, you may have the ability to stop standard 7.62x39 as well as green tip 5.56 steel core ammunition.
    Worth looking into.

    • @A9sAs
      @A9sAs Рік тому

      How thick are we talking? And is this feasible if they want front, side and back protection?

    • @EshalKhan-zf6jc
      @EshalKhan-zf6jc 3 місяці тому

      How Can someone make a body armour plate at home

  • @richbattaglia5350
    @richbattaglia5350 Рік тому +1

    Necessity is the mother of invention.

  • @deltonlomatai2309
    @deltonlomatai2309 Рік тому +1

    They should make the armour oblique like the m-1 tank so the round is deflected off.

  • @hphengdara9603
    @hphengdara9603 3 місяці тому

    Your better off making the FAB-300

  • @Mr._Donald_Draper
    @Mr._Donald_Draper 7 місяців тому +2

    Where does my tax money go???????????

  • @wangwu9299
    @wangwu9299 2 роки тому +3

    Lot of tank knocked out. Why do not use metal from them? high quality

    • @dementedbowine8681
      @dementedbowine8681 Рік тому +1

      you might be surprised but tanks use a lot of composite armor not solid plates also it tends to be heavier than needed and hard to work with car springs on the other hand are almost perfect easy to work with very hard but still flexible standard armor plates weigh 8 kg as opposed to 10 kg scrap version so they are pretty good

  • @randompotato5761
    @randompotato5761 Рік тому +2

    Heavy metal is heavy metal block bullet or slow it down

  • @bsouza4441
    @bsouza4441 2 роки тому +1

    Maybe use a steel out of some of this personal carriers destroyed also Word well.