Traxxas 4-Tec 3.0 | Bracing

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ • 29

  • @terrypepper7913
    @terrypepper7913 19 днів тому

    This is what makes a good mechanic . Figuring out how think on ur feet . I have learned the same for a real job .

  • @crazymariofan8806
    @crazymariofan8806 2 роки тому

    Awesome video! This was so helpful! There were absolutely no other videos online or any instructions with it. Thank you, you are so helpful! Thank you so much for posting this!

  • @terrypepper7913
    @terrypepper7913 19 днів тому

    There was a site that has an alignment machine & measurements.

  • @venomrc6920
    @venomrc6920 3 роки тому

    What I did is I put the front brace on and I just use 4 tie rods in the rear....just like u had it....it works perfect

  • @crazymariofan8806
    @crazymariofan8806 2 роки тому

    Also which screws go where on the rear end?

  • @flyfishbrad
    @flyfishbrad Рік тому

    Hey Joshua. Would you recommend the bracing kit for general parking lot course driving or just speed runs? I'm getting ready to order a set to tighten everything up a bit.

    • @GoKaioken
      @GoKaioken  Рік тому

      I think it’s fun to install them regardless. To me, I would get it regardless.

  • @venomrc6920
    @venomrc6920 3 роки тому

    Dam good job bro...I watched the whole video

    • @tstut111
      @tstut111 2 роки тому

      damn bro. good job to you

    • @GoKaioken
      @GoKaioken  2 роки тому

      Damn bro - good job for commenting 😝

  • @shavarasdaniels1447
    @shavarasdaniels1447 10 місяців тому

    What motor set up was that

  • @KurtsRCs
    @KurtsRCs 3 роки тому

    Nice install I was about to install my second set GPM links on my 35 Hot Rod, for I battery I use

    • @KurtsRCs
      @KurtsRCs 3 роки тому

      Pure Tech battery strap shoo goo it to the chassis and it work good i have a 4s battery in mine and crashed at 101mph and it did not move

  • @thebobs-723
    @thebobs-723 2 роки тому

    Where did you get the c-hubs and knuckles and do you know if all this will work in the supra 4tec 3.0?

  • @dirtbike9003
    @dirtbike9003 3 роки тому

    Never ends...... yup 👍

  • @edwincordero8
    @edwincordero8 2 роки тому

    Can use that kit on the Hot Rod 3.0?

  • @glennjthompson332
    @glennjthompson332 3 роки тому +1

    It looks good! Hopefully 🤔 testing on circuit race track, if that (Corvette) can get good drivetrain soon down the road.🏗️😲👍☕

  • @billieandfresh
    @billieandfresh 2 роки тому +1

    I know this type of stuff is secret but my little boy wants to do this can you please tell me what size pinion gear for the spur gear ⚙️

    • @JoeOvercoat
      @JoeOvercoat 5 місяців тому

      The manual for each model provides a table for spur gear sizes across pinion size ranges, for that model's mounting plate and brushed/brushless.

  • @remingtonlyons8733
    @remingtonlyons8733 2 роки тому

    2.0 hop up parts work on the 3.0?

    • @GoKaioken
      @GoKaioken  2 роки тому

      Yes :)

    • @edwincordero8
      @edwincordero8 2 роки тому

      But watch out. The Hot Rod is a 3.0, but many parts of the 2.0 won't work on the 3.0 Hot Rod.

  • @venomrc6920
    @venomrc6920 3 роки тому

    Also get rid of those white spacers u have on the front casterblocks....use the stock Black spacers instead....so u can tightin it down good...trust man just trying to help

  • @venomrc6920
    @venomrc6920 3 роки тому

    You can't use the rear brace if u wanna fit 6s

  • @venomrc6920
    @venomrc6920 3 роки тому

    U gotta cut thru the chassis and use velcro straps.....that's what I did

  • @chrissimkin8823
    @chrissimkin8823 2 роки тому

    So on the front suspension the upper rear arms will adjust your caster angle not your camber and you'll want them to be in the nagitive degree's (tipped towards the rear of the car) or you will end up with a high speed shake
    (A bad front shopping cart wheel).

  • @joegomez4408
    @joegomez4408 2 роки тому

    I used the same braces and the chamber was off

    • @GoKaioken
      @GoKaioken  2 роки тому

      All of that is adjustable

  • @terrypepper7913
    @terrypepper7913 19 днів тому

    Magnetize ur driver bits .