Looks BADASS dude! Whats your plan for the sliders? Noticed you didnt put them back on. You gonna have to modify them a bit now that the body sits a bit higher?
Hey mate, did you encounter any problems concerning length of electrical harnesses or hose? Also you have to adjusting your focus points on headlights.. 🇹🇹
looks great dude well done, i need to body lift my nav now, i have the same problem on my newly fitted tray to my nav, the headboard is too high, problem is i have brushbars, might just scrab em and get sliders too!! #navlife
I would have taken that winch/bull bar mount off the body and made a plate to bolt to body frame. Then you could move winch mount up and avoid welding and drilling winch mount..
Oh man that dosnt sound fun at all! To be honest i would always have chassis ones as the bullbar can come out of alignment easily! It’s definitely on my to do list! Thanks for the comment 😊
Bonjour j'ai effectué une Body Lift de 2' comme vous suite à sa pb le np300 ne monte plus a plus de 3000 trs mn passe en mode dégradé vous avez rencontré ce problème merci
If you remove the nut you welded in place, then weld a steel plate on top of existing bracket and weld nut to the back of it. Make sure you also extend the gusset up as well that way you increase the sideways strength of it. Last thing you want to do is hit something on an angle and it bend the current mounts. PM me personally if you want any more help
Does it handle like crap now? I only had 4" in my cruiser and it was shit on and off road. Yeah it was higher but so much less stable. I dropped back to 2" and kept the 4" shocks still fits 35s and the off road performance and on road stability was an incrediboe change.
@@RoamLyfe nice man glad it works for you, i liked the way it looked and all the clearance at 4" but was almost undrivable on road and so tipoy off road. Mine must be the toyota badge, seems to generate alot of problems.
I run a 3 inch lift in my 80, but I also have dropboxes and spaced swaybar mounts. 33s inch tyres too. It drives better then our other 80 with just standard 2inch lift.
@@excessivegarage mine was same mate, cruisers have drop boxes from factory the nissan drop boxes are just cruiser mounting plates, but had all the supporting compontents like panhards, sway bar extensions superior hyperflex arms and castor plates, upper and lower control arms in rear. Still drove like shit. Wandered all over the road over 80km/h real bad understeer cornering under speed. It is still running all the same gear but with a tall 2" coil and its a far more drivable car. Feel much more comfortable tackling tough tracks at pace with out feeling like im gonna end up on my lid and have no issues fitting the 35s just need to be more cautious of departure and approach angles with 2" less clearance. Not to mention less unwanted attention from the law haha
Aaron Ford you can go maximum (same as most other states now) 75mm. Or with an engineer certificate you can go 150mm just like most states. But you won’t get a nav certified with a 6” lift.
@Roam Lyfe I’m just happy to see some decent content with a np in it mate, maybe we can go wheelin someday and film it, anyways keep up the videos and love the nav build 👍🏻
Hey bro would you know anyone who could give me a hand to install 2 inch body lift ?? Around Brizzy sunny coast or goldy ?? Cheers bro love your content
@@RoamLyfe yes I just got coil spacers installed 2 inch added to clearance from ground but again, I will think a lil maybe in future try body lift as well
Pros: - makes it look taller if your into that - may slightly raise the body to improve cab clearance when offroad Negatives: - illegal in all Australian States - Worsen on road performance and handling - stress on particular chassis to cab components (medium modifications to ramify) - will worsen offroad performance when on cambered tracks (more likely to roll over) - Can be denied insurance claim and or sued - Attract police - if installed incorrectly, will have possible major chassis to cab damage. all up to the individual, but to me not worth it. If you wanted a big rig, dont buy a np300. buy a patrol or a Ram. at least on those or a twin live axle vehicle you can safely and legally (with engineering) raise the vehicles height up to 6 inches (depending on state to state) while also benefitting from flex. if it floats your boat, go for it i guess. but expect it to drive like one too :)
the monster truck! i will have to go through all these vids again when i get my 4x4
Hurry up and get one 👌👌🙌
Beast mode👌.... now for the 35s👌👍 keep the content coming👍
I’ve been thinking of 35s all night 😂😂! Should I or shouldn’t I 🤔! Thanks David mate, much appreciated!
@@RoamLyfe send it, go 40s
Roam Lyfe tempted to run 35’s on my ranger but having ifs with big wheels I’m worried about diffs and axels
Greetings from Germany! Nice Work!
Greetings mate! Crazy someone from Germany is watching!! 🇩🇪
Ya boi deserves more subs. Subscribed
Thanks mate!! You’re a legend!! ❤️
That looks great...hoping you remembered to re-tighten up the steering uni joint?!!
Yes I did!! I actually left a rag tied to the steering wheel so that if I did forget and went to jump in the car I’d then see the rag and remember! 😂
Nice Vids mate. Just discovered this channel. I am a sunny coast guy too. I drive nicklin way everyday.
Oh really! Haha have you seen the Ute! I drive it everyday too unfortunately haha
@@RoamLyfe yeah mate maroochydore to caloundra each day. Im heading down about 7:30-8 and back around 5.
Ahh surly I’ve passed you! Same times as me pretty much
@@RoamLyfe yeah mate ill keep an eye out for ya. Ive got a mate that works in the like street over from you or possibly same street.
Looks sick man loving these vids 👌👍
Thanks mate! Appreciate that 🙂
Sick dude! Love your vids man
Looks like it is time for some bigger rubber now. Looks good mate.
Hhaha goals! My wheels are so new It would be hard to get rid of them 😓
What happened to the radiator fan cover? And the gear stick, no extension?
Thanks for this
Awesome video! What type of weld did you use for the bullbar mounting?
looks beautiful mate
Thanks mate!! She’s coming along now, it’s got me excited again!!
Awesome looking truck
Thanks Trevor!!
Hello, what did you do about the ac lines? They are solid metal lines, did you bent them?
Looks BADASS dude! Whats your plan for the sliders? Noticed you didnt put them back on. You gonna have to modify them a bit now that the body sits a bit higher?
Nice man...where you get that snorkel? That look awesome
hello to you friend, could you tell me the modifications to be made for the installation of body lift (navara d23)?
Yo your navara looks cool now the only thing I would do to the front is put a ntrak grill coz there black mate
I’ll check them out!! Thanks for the comment
Hey mate, did you encounter any problems concerning length of electrical harnesses or hose? Also you have to adjusting your focus points on headlights.. 🇹🇹
Did you have to do a regear since your tires are 35"?
Came up a treat mate! 💪
Thanks Joel! Hope all is well down there!
Hey mate did u have to play around with the sliders to be lifted with the cab
does this lift gives any bad stress tension at wires or hoses, at steering column, engine and diff components and shafts ????
There is negatives to it for sure! But I know a lot of people that have been running it issue free for years now!
Did you have to relocate anything I have a 2” lift with 2” spaces does anything need extending
Have you had to change the way you mounted the bullbar yet or have you left it how it is with no problems??
Did you need to extend any wiring? I want to go for 3 inches but I'm really worried the shop isn't gonna check my harnesses or hoses
how much did it roughly set you back to get the car engineered with the lift you’ve got now
looks great dude well done, i need to body lift my nav now, i have the same problem on my newly fitted tray to my nav, the headboard is too high, problem is i have brushbars, might just scrab em and get sliders too!! #navlife
Oh yeah right I dunno how the brush bars would work you’d have to mod the steps to come up higher! Let me know how it turns out!!
@@RoamLyfe turns out its like yours, i have to remove the side steps and brushbars. new sliders!! yeww
Hey mate, what sus lift do you have before you installed the bod lift?
Makes me miss my body lift 😢
Get it backkkkk!!!
Roam Lyfe coppas in QLD are massive shit stains I wish
Hows is goin bud... did you modify your stainino snorkel/ air box to cater for the lift?
I would have taken that winch/bull bar mount off the body and made a plate to bolt to body frame. Then you could move winch mount up and avoid welding and drilling winch mount..
I subscribe mate, watching from Papua New Guinea, nice body lift mate😍👍
Wow mate! Awesome, international viewers! 🙌
Mate I'm a big fan of off road cars and daily drive able...offroad and daily use. Keep doing what you do mate, it inspired me in many ways 🙏👍❤
Did you have to get extended brake lines?
How much did it set u back to get it engineered for the higher lift
Hi mate so isn’t it illegal in QLD to have a body lift? Have u had any trouble or defected notice?
Thx
Just wondering if you had to change anything else with the body blocks ? Like in a manual the shifter length or anything like that ?
Did you have to extended the wires and hoses connected to the cab from the chassis? Looks sick by the way
Nope! But I’m not a professional and if you’re unsure I’d suggest talking to one! I’m just following some friends that did similar setups!!
Where’s your shop mate? Keen to do a body lift and ironman bar lift on mine? Haha 🤙🏼
Hey mate it’s actually my works shop! So we can’t do any mods on other people’s cars ☹️
Very helpful video. Sweet truck too. Did you have any problems with the gear selector? And do you know the bolt sizes. Cheers mate
hope you dont pull (whinch or recovery points) on the bullbar. Now that it's sitting higher it might damage the chassis.
Good point! I currently don’t have any recovery points but I do want to get some! They will be chassis ones I assume
@@RoamLyfe yes, would be better. I've see a Mercedes G-Wagon winch off it's higher placed winch bumper ;). the damage was no fun!
Oh man that dosnt sound fun at all! To be honest i would always have chassis ones as the bullbar can come out of alignment easily! It’s definitely on my to do list! Thanks for the comment 😊
They 33s?
Hey mate so overall how high is it im getting one of these tomorrow
hey mate, was your canopy just the standard size that most shops build?
Any cons in np300 body lift?
Do you guys install hilux 2inch body lift?
Hey Mate, where did you get the longer bolts? Did you know the thread pitch? 1.25 fine m8?
Any upgrade on the exhaust?
Bonjour j'ai effectué une Body Lift de 2' comme vous suite à sa pb le np300 ne monte plus a plus de 3000 trs mn passe en mode dégradé vous avez rencontré ce problème merci
how does the 2.3 handle turning those tires and how does it perform on the highway
Handles great mate! Honestly think it’s got plenty of power for what I need! Although a tune is on the cards!!
Needs 35s now mate 😉 I’m puttin 35s on my dmax this weekend cannot wait
Ooo let me know how that turns out!! 😍
Roam Lyfe have you got an ig page for this rig. Would like to follow you and also show my mods I’m doing
Roam Lyfe never mind I found ya
Yeah mate, send it through!! Love seeing other builds!
hi what u do about top radiator hose it looks under stress, did u do anything with radiator brackets or any other adjustments after.
I didn’t do anything to radiotor but it seems fine to me, everything seemed to look great!
Great rig! Does the engine rise with the lift or still sits in same spot?
It stays in the same position as it is mounted to the chassis!
Roam Lyfe right so would intercooler piping and snorkel need to be extended?
You need extended motor mounts if you wanna raise the motor
@@knolez1546 you motor his mount
I like💪🏽 thinking doing it to my np how it drive to this day ? And what else u have to do for mods after doing it ?
Drives perfect mate only thing I have noticed was that I’m higher up haha!
@@RoamLyfe 😂😂😂can u hook me up with link what blocks you got...Cheers mate
Hey bro what exhaust have you got?
how to extend steering shaft?
Can nearly see my work 😂😂
Where abouts you working at mate?
Would a standard bumper fit?
looks mad man!! what yr truck is your one?
Hey mate! It’s a 2018
Anything need extended? Like the gear shift or anything?
I run a extended shifter that I sell, just cause it does drop down!! But other than that no!
Ηοw much is your suspension lift mate? And what brand? I really like your car!
What exhaust are you running
Any issues with steering, brake lines or wiring mate??
Hey mate, none yet 🤞
I’ll need a ladder now
You’ve needed a ladder since day 1 😘
What brand of Body blocks are they on eBay?
Yes on eBay, they are from lux lifts!
Hey I forgot to ask how hard would the tub blocks be and anything that will affect the towbar or anything?
Hey mate, have you ever had any issues with highway patrol for the DPF delete or anything?
Nah touch wood I didn’t!!
Would you recommend doing a 3 inch body lift on an Np300?
Hey mate, I definitely do not recommend doing that! 2” is a pretty safe bet but 3 you’ll be stretching stuff way past what it can handle!
Thanks very much mate! Caribbean fan here, keep up the good work.
You should remake the bullbar mounts
How do you think I should do it? I’m very open to ideas!!
If you remove the nut you welded in place, then weld a steel plate on top of existing bracket and weld nut to the back of it.
Make sure you also extend the gusset up as well that way you increase the sideways strength of it. Last thing you want to do is hit something on an angle and it bend the current mounts.
PM me personally if you want any more help
That’s a big help! If you can pm me on Instagram I’d definitely love to pick your brains a bit!
I would if i had Instagram.
PM me facecrap..... Griffo is the last name
Is your photo a jetski?
Does the bar with that mod still retain its ADR compliance (airbags etc)?
Not entirely sure mate!
Mate as soon as you body lift it it’s highly illegal, so ADR would be the least of his problems
@@smokin4x45 QLD IFS vehicles can have a 2" body legally
Jordy T yer, doesn’t look like an old vehicle though mate...
Disculpen esto afecta en la columna de dirección y ramales, favor una respuesta en español
Sorry you mignt have to convert that one to English for me!!
What exhaust do you have? sounds mad!!!
Crg dpf delete pipe!!
@@RoamLyfe did you have to do a remap?
Does it handle like crap now? I only had 4" in my cruiser and it was shit on and off road. Yeah it was higher but so much less stable. I dropped back to 2" and kept the 4" shocks still fits 35s and the off road performance and on road stability was an incrediboe change.
Hey mate! I havnt noticed any change besides a tad bit more body roll and obviously sitting up higher! Its been great so far!
@@RoamLyfe nice man glad it works for you, i liked the way it looked and all the clearance at 4" but was almost undrivable on road and so tipoy off road. Mine must be the toyota badge, seems to generate alot of problems.
Looks aggressive as anyway, wish my rig could pull it off without all the negatives it seems to generate for me .
I run a 3 inch lift in my 80, but I also have dropboxes and spaced swaybar mounts. 33s inch tyres too. It drives better then our other 80 with just standard 2inch lift.
@@excessivegarage mine was same mate, cruisers have drop boxes from factory the nissan drop boxes are just cruiser mounting plates, but had all the supporting compontents like panhards, sway bar extensions superior hyperflex arms and castor plates, upper and lower control arms in rear. Still drove like shit. Wandered all over the road over 80km/h real bad understeer cornering under speed.
It is still running all the same gear but with a tall 2" coil and its a far more drivable car. Feel much more comfortable tackling tough tracks at pace with out feeling like im gonna end up on my lid and have no issues fitting the 35s just need to be more cautious of departure and approach angles with 2" less clearance. Not to mention less unwanted attention from the law haha
Is this engineered if so what needs to be done and how much i got x250d and looking to do that
Happymanasfk Subaru can’t engineer a body lift mate there illegal
You actually can in qld now 2 inch body 2 inch suspension and 2inch on the tyres
Aaron Ford you can go maximum (same as most other states now) 75mm. Or with an engineer certificate you can go 150mm just like most states.
But you won’t get a nav certified with a 6” lift.
@@smokin4x45
I just found out in vic 2inch lift 2inch body and 34inch tyres cost around 8k
Wanna help me do mine 😄, looking good mate 👌🏻
I wish I had the time to help everyone! 😓😓
Roam Lyfe 😂 all good mate, it’s hard enough to do stuff to your own car as it is.
If I had my own workshop I’d honestly love to! But it’s hard using my works shop and working 40hrs a week + working on my car and filming videos!!
@Roam Lyfe I’m just happy to see some decent content with a np in it mate, maybe we can go wheelin someday and film it, anyways keep up the videos and love the nav build 👍🏻
hey mate, I love the nav bro. Just wondering if the nav brings unwanted attention from the police? have you ever gotten a defect?
Hey mate! Thanks 😊
And no I haven’t, I don’t hoon at all just cruise and off road 🙂
We went 4beeing yesterday it got messy
Oh sick! Where did you go?
Beerwah I think
It was so good got bogged a few times we got the muddies on the Luxy and took that out
Good times hey!! Bet that cleanup was fun 🤘
Yeah still got more to do the mud was up to the doors
Hey bro would you know anyone who could give me a hand to install 2 inch body lift ?? Around Brizzy sunny coast or goldy ?? Cheers bro love your content
Hey mate at the moment I personally don’t have time! Hmm maybe try a Instagram page? Someone would surly help for some coin!
what exhaust have you got man? Also did you remove your dpf, i don't know whether to or not.
Hey mate, crg delete pipe and the standard exhaust is cut off just after the first hanger! Been working for 20,000kms now
what size tyre?
33” tyre mate 😊
Great video, I guess its possible to do with NISSAN PATHFINDER R51 as well? I need to consider doing this!
Yes you can just be careful doing so as it can be dangerous and also it’s for off road use only
😉
@@RoamLyfe yes I just got coil spacers installed 2 inch added to clearance from ground but again, I will think a lil maybe in future try body lift as well
How's the cops up there atm?
Really good mate, I just respect them and they are generally fine! 🙂
I wish police would just let us have fun. That 4x4 is beautiful.
That would be a world I wanna live in!
Tire size? Ty....
Hey mate they are 33 inch, 16x8 0 offset! 🙂
Roam Lyfe , my np300 has 2"susp lift w/ 285-70-17, plan to go higher like yours, many thanks for reply!
Do it! You won’t regret it!! Let me know how it turns out!
Is this mod illegal
For off-road use only!
So what do u say when the cops pull you over
Youssef Hodroj you say ‘thank you for the fine officer’
if you don't have bigger tyres going on it you've just wasted $200
Donk 🤙
When are you gonna lift it the rest of the way? Nah jk looks good man
Hamish, BUY A DIESLE
@@RoamLyfe ill give you $6969 cash for yours right now
bad procedure ! *** body lift is always done first *** then further adjustments follow as front bumper ***
defiantly gonna need the dropslide now haha
😂😂😂😂 and a staircase to the door
Get 35’s
Could be on the cards! 🤔
I wish police had 4wd anorexia..
Hahahaha, so good! I wish that too 😓
Watches video... straight on ebay for body lift!!!
Hahahahaha good shit!!
best looking ute ive seen 🥵
Pros:
- makes it look taller if your into that
- may slightly raise the body to improve cab clearance when offroad
Negatives:
- illegal in all Australian States
- Worsen on road performance and handling
- stress on particular chassis to cab components (medium modifications to ramify)
- will worsen offroad performance when on cambered tracks (more likely to roll over)
- Can be denied insurance claim and or sued
- Attract police
- if installed incorrectly, will have possible major chassis to cab damage.
all up to the individual, but to me not worth it. If you wanted a big rig, dont buy a np300. buy a patrol or a Ram. at least on those or a twin live axle vehicle you can safely and legally (with engineering) raise the vehicles height up to 6 inches (depending on state to state) while also benefitting from flex.
if it floats your boat, go for it i guess. but expect it to drive like one too :)
Why would u even bother waste of time
Ha gay 😂
it looks stupid without the bed
Do you need to extend your steering rack?
Did you need to adjust radiator height