Ironman 4x4 Raid Front Bumper Suited For 6th Gen 2021+ Ford Bronco | Install Guide
Вставка
- Опубліковано 10 лип 2024
- Join us on this magical journey of excitement as we show you step-by-step how to install the Ironman 4x4 Raid Front Bumper on your 6th-Gen 2021+ Ford Bronco.
Get your Ironman 4x4 Raid Front Bumper for your 6th-Gen Ford Bronco here: ironman4x4america.com/raid-fr...
Chapter Selection:
0:00 Intro
0:18 Unpack your bumper and layout your parts
0:34 A note about adaptive cruise control
1:11 Remove front skidplate
1:33 Remove factory front bumper
3:28 Remove intercooler shroud and adaptive cruise sensor
4:40 Remove active aero louvers and remove wire harness from that assembly
7:46 Cut a gap in the radiator shroud for the wire harness to pass through and re-install active aero louver assembly
8:41 Set up the adaptive cruise sensor relocation bracket
13:48 Remove radiator top shroud
14:18 Unplug front camera and sprayer if equipped
14:54 Remove front grill
15:33 Remove radiator grill cover, fenders, lower front trim, and headlights
18:25 Remove top 2 louvers from grill cover and trim area for adaptive cruise sensor relocation
21:06 Enlarge hole on top core support for relocation bracket hardware
21:32 Re-install modified radiator grill cover
22:29 Re-locate hood release cable retainer clip
23:33 Install adaptive cruise sensor relocation bracket
24:57 Re-install headlights, lower trim, and fenders
26:17 Adaptive cruise sensor adjustment
26:53 Remove front camera and harness from front grill
27:44 Remove front parking sensors and harness from front bumper
29:09 Install parking sensors and harness into Ironman 4x4 Raid front bumper
31:02 Install LED fog lights and protective gravel guard plate
31:33 Assemble front camera relocation bracket
32:40 Install LED light bar
33:26 Install camera extension cable and sprayer hose
35:02 Install hoop to bumper shell
36:03 Install front plate bracket and winch fairlead
36:38 Remove factory nut plates from front frame horns
37:08 Install winch tray support brackets and recovery points
39:43 Install winch tray and winch
41:52 Install winch control box relocation bracket
43:39 Hang grill back on but leave loose
44:09 Install front bumper shell
45:26 Feed camera cable and sprayer hose back up and reconnect
46:35 Tighten grill hardware and reinstall the radiator top shroud
47:50 Reconnect bumper wire harness and set bumper position with pinning bolts
48:48 Re-install front skidplate
49:15 Conclusion
For additional installation support or if you have any questions please reach out to our customer service team. ironman4x4america.com/ - Авто та транспорт
I’d like to start adding off road equipment to my 11 Ranger 4WD.
Im guessing installation is a lot easier if you have a standard bumper and none of that camera and adaptive cruise control.
Correct, you can skip those steps and shorten the install time.
5:24
Как будет работать радар адаптивного круизеонтроля? Его перекрывает решетка
Id like to buy the factory bumper.
What other winch sizes fit in that slot? Is there any documentation available?
Standard winch sizes, 4.5x10
Maybe I'm missing something, and I'm not talking about printed instructions because there are none, but how am I supposed to fit my bronco stock round fog lights into raid front bumper? I'm right in the middle of it. You guys have to do better. Assorted nuts, bolts, and washers mixed in a single bag is ridiculous.
The RAID front bumper has inserts to mount cubed aftermarket lights.