Ironman 4x4 Premium Front Bumper Suited For 3rd Gen 2022+ Toyota Tundra | Install Guide

Join us on this magical journey of excitement as we show you step-by-step how to install the Ironman 4x4 Premium Front Bumper on your 3rd Gen 2022+ Toyota Tundra.
Get your Ironman 4x4 Premium Front Bumper on your 3rd Gen Toyota Tundra here: ironman4x4america.com/armor/f...
Chapter Selection:
0:00 Intro
0:18 Unpack your bumper and layout your parts
0:22 Safety tips
0:43 Drop down the active air dam
1:14 Remove factory front bumper
3:46 Remove crash bar
5:15 Relocate active air dam motor
13:06 Cut a gap in the active air dam motor housing for the hose to pass through and re-install active air dam
13:28 Install crush tub spacers if you have active grill louvers to provide clearance
13:41 Install recovery points
15:58 Install winch tray
17:04 Mark and drill holes in the frame to run reinforcement cross bolts
17:58 Remove winch tray
18:15 Install crush tubes and through bolts into the frame
19:28 Re-install winch tray
19:37 Install gravel guard bracket to recovery points
21:53 Install your winch
22:14 Remove parking sensors and parking sensor wire harness from factory bumper
23:53 Remove active grill louvers from factory bumper
24:34 Remove side panels from factory bumper
25:27 Remove fog light support piece from factory bumper
26:40 Cut and re-install factory bumper support pieces
28:31 Cut factory bumper side wings
31:59 Re-install factory bumper side wings
32:20 Re-install active grill louvers
33:13 Install grill brackets to the winch tray
33:34 Re-install factory grill to the truck
34:09 Cut out space in the factory bumper grill to provide more access to winch clutch handle
36:22 Install flip up license plate bracket and fairlead
39:03 Install Ironman 4x4 cube lights, scopes, light bars
39:23 Install parking sensor brackets into the Ironman 4x4 bumper
40:52 Install parking sensors and parking sensor wire harness extensions
42:03 Relocate adaptive cruise control and front camera
42:10 Cut fender flare to match cut of the bumper
42:59 Install front bumper shell
45:06 Reconnect parking sensor wires, adaptive cruise control harness, and front camera harness
46:03 Set bumper up and drill for pinning bolts
47:40 Install center gravel guard plate
49:37 Install wind deflector guard plate
50:23 Install side gravel plates
51:12 Optional trim lock install
51:32 Re-install fender flare screws
52:11 Tighten down your grill hardware and reattach harnesses
52:45 Conclusion
For additional installation support or if you have any questions please reach out to our customer service team. ironman4x4america.com/​

[@MrJuanmenor]

I am getting almost done, thank for your video….

[@giecy1977]

How long does it take to install this? I really like the bumper but it looks like it takes a lot of time to install this...

[@Ironman4x4America]

Install times vary with experience. This bumper can range between 6-8 hrs when completed by an experienced technician.

[@user-iy8yh8jj1u]

How am I supposed to bolt the front camera onto the bumper because all you have is a picture that doesn’t really tell me anything