Replace Broken Interior Lock Handle On Toyota Sequoia 2004
Вставка
- Опубліковано 18 вер 2024
- Replace Broken Interior Lock Handle On Toyota Sequoia 2004 on the driver side door. 2004 Toyota Sequoia - Tundra Front or Rear, Driver Side Interior Door Handle replacement parts.
Camera: amzn.to/3em10tX
Camera Bag: amzn.to/2HZWOE5
Lighting: amzn.to/2TLXe3F
Filter: amzn.to/3jS3YI2
Video Editing Software: amzn.to/37Zs0P0
Car Pryer Took Kit: amzn.to/3c7btZy
Tool Kit: amzn.to/3btOedl
Lock Handle: amzn.to/3qupwxE
Flash Light: amzn.to/3kZSg0g
Thank You For Watching, pls like and subscribe for more videos.
i like the fact you zoomed in on it for us to have a closer look to exam before you change it and after too. that helps a lot! thank you! 🙏
Hope it work out for you
Thanx again, Chad for saving me money - I just finished doing my other door handle that broke. My after market part did not fit exactly - the plastic locking notches did not match the slots in my 04 Tundra so I cut them off with small clippers.
Also, helpful hint when putting door cover back on: make sure the removable red fasteners are all on the door cover - if not pry them off and put them in place on the door (I had several that had to be taken off the door and placed on the door cover - if this is not done, its hard to pop the door cover on correctly.
Also, when putting the door cover back on start with the top so that it fits over the lip correctly.
I’m not mechanical so this video was extremely helpful 👍👏👏👏
Glad it helped and thanks for sharing your tips.
Awesome brother it took me a little bit to get the wires inside the harness but other than that all good thank you for the video save me $$539.00 and a week at Toyota.
Glad it helped
This vedio is AWESOME!!! I have been without a door panel for like a yr and with ur vedio in 15 min I fixed it 🙈🙉🙊
Glad it helped
Thanks very much - you probably saved me several hundred in labor charges 😎👍
You’re welcome, glad it helped.
Thank you sir! I'll try out waiting for my handle to arrive awesome video thank you so much
You’re welcome, hope it works for you.
great good explanation thank you
You’re welcome
Great job Chad. Thank you so much. BTW, when I fix my door handle, I'll attach a feeder wire to my wire disconnect plugs to facilitate installing the door panel.
You’re welcome and thanks for sharing
Excellent video, thank you
you're welcome
Thank you sir for making this video..it sure helps
You’re welcome glad it helped
Mahalo for taking the time to vid this process. It was painless and again “Thank you and God Bless You “ !!
You’re very welcome
Thankyou sir!
You’re welcome
Thanks
You’re welcome
👍🏼🥰
👍
I need to fix mine but im scare to loose the battery cable 😩😩😩
No battery required
Nombre de la parte número de parte
El enlace para comprar la pieza está en las descripciones.
How did you get that piece out to drill the hole bigger?
I just carefully pry out of the handle housing. Its been awahile since I did it so I can't remember exactly. Look at it closely, see what holding it then carefully pry its way out of it.
Ok thanks for the video