Це відео не доступне.
Перепрошуємо.
Infiniti Q50 Vicrez Carbon Fiber Rear Diffuser Install!
Вставка
- Опубліковано 13 сер 2020
- In today’s video I show you how to install Vicrez Carbon fiber rear diffuser on your 2018 Infiniti Q50! Link to part below! 👇🏽
www.vicrez.com...
Thanks for watching guys!
_Please subscribe so you don’t miss out on anything_!!
More Tirado Racing 👇🏽
Instagram:
Www. tiradoracing
Facebook:
Www. tiradoracing
Wordpress:
Tiradoracing.wordpress.com
I do not own the rights to any of this music
-----------------------------
MUSIC: Karl Kasey @ White Bat Audio
------------------------------
If you guys have the same ebay special as i got: connecting white to red and black to black gets rid of the flashing. It will only light up with the headlights on, and will no longer work as a brake light. Seems better than flashing while braking though.
I got the eBay one as well. But it’s not working
Black and black white and red and red and green is the best set up
Thanks it works. Only difference is I did black with black. Red with green and I had white so I did that with red. And it worked.
When I had red with red and my white to green. It kept blinking.
Nice!
Wasn’t sure what was wrong with mine but this comment helped me so thank you!
So after you applied heat to the solder and heat shrink you wrapped each wire in electrical tape?
I used dealership “Flocking tape”, wrapped them all together. Electrical tape will work.
Will this work the same for a 2023 q50 RS ??
Nice video! What did you do with the wire from the diffuser going into the grommet? Do you suggest to tape it down so it doesn’t flop around or does it not matter?
The extended wire, is that from the harness? The wiring that came with my diffuser is super short.
GOOD SETUP! Can't wait until my CF rear diffuser gets here.
Awesome! It does look clean I am very happy with the outcome!
Great video!
Thank you Joan! Hope it was helpful!
My diffuser light constantly flashes, any idea why
Clean bro
Thanks brotha! We have a long way to go with the Q50 but this has been a nice start!
I have 2018 q50 luxe .. my wires are white , red and black .. would it be the same setup for the wires ?
Had the same wiring. Ended up doing white to red and red to green and black to black. It’s worked perfect.
@@damianr012 I did that and it works but when the brake is applied it flashes until I let off the brake nonstop
@@HunchoMarc1that’s how it was made to work unfortunately. The flashing feature is cool but it’s annoying
Hello how are you bro I may need your help here red diffuser with the light same as what you are installing this video but the thing is I don't know if there's any difference because he installed the wiring in the driver side and when I turn all my lights in the car seems like I'm losing power also the diffuser light is still continuous blinking do you know what may cause that problem or how can I solve that problem do I need some type of baluster or something stop it from blinking
Like I told the last guy, i only know what I did in this video with this car. If you didn’t do exactly what I did in my video with a 2018 q50 I really can’t trouble shoot for you.
@@TIRADORACING okay thank you hopefully that would help me out I will show my mechanic your video and that way hopefully that will solve the issue
Why didn't you use T-taps? Easier and less chance of cutting through the wires. Also, why not use your heat gun for the shrink wrap instead of an open flame? You could have done all three at once. Last pick. Why not use black hardware for the install since it's visible or black screw cap covers? I guess I'm just picky 😂
Yea bro it ain’t even that deep 😂. Why didn’t I just twist the wires together and use electrical tape? I could have used butt connectors too.
The auto scene is full of a million preferred ways to do things and everything gets clouded with “the right way to do it is X”.
Appreciate the feedback tho
@@TIRADORACING there’s always that “guy” who knows everything these the type of people who I would never listen to.
My light blinks all the time the lights are on. Or when i unlock or lock the car it only stays solid when I press the breaks without the lights being on. How can I fix it?
Double check your wiring. looks like something is grounding out or something keeping constant power.
@@TIRADORACING I wired everything again and it still flashes. I connected the same way you connected yours.
Well....that’s all I’ve got. I really don’t know what else you could do.
Might be a fault with the led and not the wiring.
@@fredycastro8804 did you fix it?
@@lechonkadventures6616 no, not yet I haven’t figured it out yet, it’s still blinking
when i press the brakes it doesn't stop blinking any tips??
No clue. Some others have had similar problems but I really have no idea. If you did what I did in this video then I really have no tips other than double check your work.
@@TIRADORACING Thanks for replying and i ll double check it
@@lechonkadventures6616 were you able to figure this out?
Only install the red and black, it’ll only work when your lights are on but it won’t blink
Does this fit the g37 ?
Bro I’m an electrician and ur terminology for the wires that ur using is triggering me 😅, really good tutorial tho.
Cristian,
I am an english tutor for veterans at Texas State University and your grammar is killing me 😅.
Thanks for watching though.
My right part of my tail light went out but everything working fine can anyone help plz
Me too buddy. Me tooo. 😭
any fix this happened right now…
@@MannyQ50What did yall do to fix it 😭😭
@@OblivvOfficial ended up being a fuse in the fuse box
Might I suggest washers on the bolts and paint the bolts black 🤙🏼
That or you can use black hardware. Either way you really can’t see it lol
U don’t need a washer with lock tight
@@aidenhayes1684 What ? The washers are there so the material doesn’t rip out around the bolt
My diffuser comes with a red, black and white wire. The wiring harness has red, green,white,blue and pink/purple wires. Any suggestions on wiring this? Your help would be greatly appreciated, thanks
Did you find a way to do it ? I have the same one
?
Looks dope! I'm trying to find one Without the brake light for 2018+ q50, but I can't seem to find anywhere! Anyone knows where to buy one?
Thanks and I do not know bro sorry.
You can find in ebay or amazon
Ebay
Where did you get that cobra lamp??? I need that!! I have an 04 SVT TERMINATOR COBRA
Hobby Lobby! They always have them too. I got that one in like 2012. But their usually always in stock.
@@TIRADORACING really? It's not the Shelby licensed one?? I looked at Hobby lobby on line I didn't see any. Do you remember how they refer to them?? I'd really love to find one for my room with all my cobra things
@@TIRADORACING if you see one I'll gladly pay you for it and to ship it to me in Texas. I'd love to have one for my cobra room
Lemme see what I can find
I only have red black and white wire on the diff Still connect the white to the green ?
Ooof I’m sorry bro I really am not sure. I don’t want to tell you the wrong thing 😣
I wired them up it works is just when I hot the brakes it only flashes it don’t stay steady
Did the product come with a sticker? Lol just curious
Lol it actually came with a sticker, a lanyard and a bottle opener 😅
Do you think I’ll be able to wire the light so it doesn’t flash? I want it to be a clean solid light
I am not sure.
Only install the red and black, it’ll only work when your lights are on but it won’t blink
@@dontbackdown6938 didn’t work
Red to red black to black yellow to red if you want constant
What happens if lEDs go out on diffuser light. Are they easily replaceable
Ya the lights itself are only 20$ on eBay
@@hblethan5366 ty bro 😎
@@hblethan5366 do you have to take the diffuser off to replace the lights tho?
A reply to Zabans, no, red light blinking continuously. I messed up and bought an Ebay special that was not carbon fiber as described & returned it. Buyer beware
How’s the 3M holding up? I just installed mine
It held on for like 2 years lol I just traded the car in last Friday. Never had a problem!
@@TIRADORACING traded ??!??😭
@@TIRADORACING i had a Q in 2017 and got a scat pack after, and i just sold mine after using it for 2 years for the same amount i got it for and got another Q, i didn’t like the scat /: it was a beautiful car but ehhh kinda a let down
Yea man it was a hard decision but we needed an suv. We got a qx50 luxe and we got the same for the Q that we paid 😂. So same boat.
I wanted a charger but I had a srt8 charger now the challenger and after looking at them closer I just wasn’t too impressed. The Red Sports are more my style.
@@TIRADORACING that’s awesome man, i seen some QX , I’d probably in the future do the same and stay in the Infiniti family, i enjoy it a lot, but no kids yet so I’ll cross that later I’m sure 😩
Yooo what up bro !! Which Grit for the sanding did you Use ???
0 grit bro!
I’m kidding. Honestly you don’t need to. Just clean it and use the promotor.
You can also just use a Scotch Brite pad
Ese difusor se le puede poner al Nissan maxima 2014
You think this would fit on a 2014 Q50
It will not fit a 2014. Rear bumpers are different.
My brake light blinks non stop when I press on the brakes…
Like I told another guy on here.
My model is a 2018 q50 luxe. If you followed the steps I did verbatim there should not be a problem.
Idk if Infiniti’s wiring changes between models and years. So if you have anything other than 2018 luxe and you soldered the wires exactly how I did I really don’t know how to fix or change it. 😣.
@@TIRADORACING I have a 2018 sport, its the same, lime green, purple, black, red. Its probably not infiniti, but the product itself because I didn’t get mine from vicrez, I just decided to disconnect the flashing and keep it lit lol.
Everything works fine, it’s just the flashing is continuous when I press on the brakes.
Hmmm I wonder what the difference is in the led light that makes some not blink or continuously blink. It might be a difference in the manufacturer of the rear diffusers…
@@ItsR1C3 how did you disconnect the flashing? Did you disconnect one wire?
Will this fit on a 2018 pure?
Not sure, check out vicrez website or send them an email.
Where did u buy your diffuser from???
Mfr engineering - chassis mounted rear diffuser, you have to call and ask for “Tirado racing spec”
how did you take the two wirings from the black piece clip thats connected to the car
It’s a clip that releases. Your talking about the Eli tricks connectors? Their behind the trunk liner. Remove trunk liner, unclip the harness. That’s it
Do these diffusers fit 2017 q50s?
No sir, the 17 bumper is different.
@@TIRADORACING oh, ok thanks
Is this a 2018 Q50 Sport?
No it’s a 2018 Q50 Luxe with the 3.0T
Oh wow, I have the exact car but without the sensors. I don’t know what the difference is but two reputable shops told me the diffuser is incompatible with my 2018 luxe bumper. I’m having a hard time returning the product to vicrez now, though I love the product and wish it would fit.
That’s really weird I just installed it on a 2018 luxe lol the bumper is different on 2017 and below tho.
Yeah, it really is weird. The entire reason I ordered it from vicrez is because I wanted the quality/fitment to be perfect. There is absolutely nothing wrong with the product, it’s jus not fitting properly according to two shops! After the first said it can’t work, I decided to go to another popular shop that installed quite a few of these diffusers. He never installed one from vicrez but it essentially looks the same other than the quality of the carbon fiber. Both times, with me willing to pay $$$, told me it’s not compatible.
I’m just shocked that vicrez is giving me such a hard time with this return.
Man send me pics of your rear bumper on Instagram @tiradoracing.
I don’t see how it doesn’t fit lol. Have you tried installing it?? Or at least holding it up to the rear bumper to see if it fits?
Can i put this on my 2014?
I don’t think so, I think your bumper is different.
@@TIRADORACING Do you know how it’s different? Because I saw this guys instagram page and he has a 2017 and has that diffuser
Right.... a 2017.
14-17 are the same
2018 it changes.
This rear diffuser is for a 18-19. So it looks like you need to find out where he got his diffuser seeing your model years are compatible.
The vicrez website CLEARLY has the diffuser I used listed for 18-19 so do not buy it thinking it will fit lol.
Will this diffuser fit on a 2017 Nissan Altima?
No
tutorial man
Yes sir! I like to mix it up !
Wish they made this for the Q60 Coupe
I think there are other companies that make one for the q60’s
We have them in stock!
Check us out on ig @southbay_autoworkz
@@southbayautoworkz9117 email sent!
ong i’m not doin that yk how much i should expect to pay for someone else to do all that😅
Honestly like 200 bucks lol it’s not that hard
Will this fit on a 2017
No the bumpers are different.
Aftermarket part will right ??
check out SouthBay_Autoworkz
Juan Inzunza already do but wussup w jaliscos carbon fibor
@leninftp yeah theyre good too, i bought a new steering wheel from jaliscos 😎
$654 for a part everyone else sells for $100? You should be ashamed.
Whoah buddy I don’t sell it lol 😂 idk what the price was 3 years ago when I did this either. But yea if you can find it at a more affordable price go for it!
you got ripped off my guy
I mean I don’t pay for these parts at all… my guy.
But if you believe it’s a rip off explain why so others may read and make a decision based off the information your providing.
@@TIRADORACING Yes sir, I understand the quality of
the product is very good but there are competitors that provide this exact diffuser for the Q50 for under $250
That is a very valid point. It’s also the beauty of the market. I would never push someone to pay more if they can get the same product at a better price, at the end of the day we all work hard for our money. My only question would is what is the trade off (if any) for buying at a cheaper price… customer service? I’m not sure, just thinking outside the box. But to be clear you have a valid point.
@@TIRADORACING You’re a King. Just purchased a diffuser for my sexy Q50 and your vid helped me understand the wiring 😇🙏🏻