Restoration Mixer Table 16-Chanel Mic/Line MACKIE 1604-VLZ Pro
Вставка
- Опубліковано 15 жов 2024
- Thanks for watching, subscribe & share!
Restoration Mixer Table 16-Chanel Mic/Line MACKIE 1604-VLZ Pro
#Mr_Electricity #Restoration #Mixer
► Subscribe to channel: / mrelectricity1111
Please give me your opinion. Where is not good Let me improve.
------------------------------------------
Thank you for watching the video. please support me. Thanks you very much. love everyone.
I restored the same mixer. Had problems with fading channels all the time, until I changed all the ribbon cables and all problems were solved. Don’t trust any revision (A or B or G). I had the last ones that were supposed to be the shit. Finally replaced all those with common ribbons that I bought in Aliexpress for cheap, and now I’m super happy with my unit. Finnally I can relay on it.
This is the same mixer I use at home. It sounds great and has all the options I need. I had to take mine apart and clean the ribbon cables with automotive contact cleaner and it has worked great ever since. I bought it as part of a full used PA package that had quite a lot of wear but I'm happy with the mixer
First Board I ever used in Highschool Stage Crew! Wayback !! Our school also had this board on a Bose Cafetorium system we had ! We also would use this board for pep rallies in our gym with 6 JBL Eons and the Bose sub from our Cafetorium!!
Salut dengan keuletan bapak dan di bantu oleh ibu nya 😀🙂
Sukses terus pak semoga Allah memberimu petunjuk dan hidayahNya 🤲
aaaaah smooth dust and static free sliders. good job 👊
BISOUS BONJOUR DE LA FRANCE BIENVENUE JADORE CONTINUER MERCI
Eu tenho uma dessa e é incrível a qualidade da mesa de som Mackie
Um dos melhores mixers
I mixed a bunch of live shows with one just like this back in the early 2000s. They were built like tanks. Looks like the power supply caps and voltage regulator failed as they are want to do over time. It was always a toss up which one died first and took out the other. Done right, you’d replace all the caps, especially the ones in the strips but they probably work ok, just might sound a little crunchy.
would you say its like one of the best beginner mixers to cut your teeth on, or what?
@@themadmallard , the one you can afford. Mixing boards or desks as our English friends call them, start a 39 bucks and go into the millions for a large recording board. The principles are mostly the same be they digital or analog. At the simplest, it’s just a few channels with tone controls and a fader that adds that channels outputs to the master mix. At the most complex, it’s effects lines, sub mixes, mic minuses, automation, tone, compression, and just about any thing you can imagine doing to a wave form. But at their heart they are used to mix sounds. The one you can afford, or beg to use, is the right one. Mix as much as you can, watch others, and read the theory books. Some of the greatest music ever made was done on a 8 channel mono board. It’s a tool. You have to provide the art.
@@Bill_N_ATX well, this one i think is basically a great starter because all the principal features it has that kind of start you on a journey to more complicated boards later, even fully digital boards.
@@themadmallard , if you could get a good used Mackie like this where all the strips worked and the faders were still quiet etc, it would be fine to work and learn on. I did a bunch of live events on one just like it back in the early 2000s.
@@Bill_N_ATX As a Brit, we call them Audio consoles; only sometimes desks, but mostly just mixers..
ALSO Love the use of a METER FACE METER. Only way to successfully test these components!!!!!!
Great job!
New life for a mixer!
Would of been nice if you could explain what exactly you are doing or looking for audio wise, and also what spray and materials that you are using.
When brushing the circuit board, what was in the cup that the brush was being dipped into?
Só alegria. Parabéns belo.trabaho
Wow! It turned out beautiful. Excellent work, congratulations.
厲害 錄音室 設備混音
This brings back memories. My first console was one of these.
I noticed during diode check he set his meter for (1K) resistance.
Was the (Diode Check) feature not available on that unit - and in checking bias (using his method) what values was he looking for to show good?
Sin duda está consola es una maravilla de la ingeniería en audio y sonido, Buen Trabajo
deberias ver una ssl
FANTASTIC AND BEAUTIFUL RESTAURATION AND BEAUTIFUL THANKS 👍😀🆗
Wow! Painstaking work! Impressive.
I have a Mackie ProFX12v3 and the USB channel 11/12 fader left channel drops out and crackles. I have to pot it up to full max to get both channels to read on the VU meters. And sometimes I get levels when it's potted all the way down 🤔. At times I can just tap on the fader knob and audio jumps on with the fader completely down. It's really wonky and I'm not a super tech like the guy in this video. I was thinking I may need to just clean it out with compressed air or one of those computer air blowers. Any suggestion from anyone would be greatly appreciated.
I hv worked on this beauty. Really simple and efficient machine
Well done 👍👍👍. Thanks for sharing
I love working with this console. There's one at the company I work for but unfortunately it's not working 100%. Some channels are hissing and only have one working master output. Still her sound is very good.
I picked one of these up three months ago for under $200. It was in almost perfect condition with everything working an even had the rotopod kit installed. It's my main workhorse for the home studio and I love it
Digikey carries over 800 sliders
hello very good informative video ! what is the composition of your electrical solution cleaning ? is it homemade ? thanks
С пробитым пяти вольтовым стабилизатором напряжения, повезло, что ни чего не сгорело на других платах. Ну и повезло еще по-тому, что даже не прозвонил пяти вольтовую линию на других платах на короткое замыкание, а сразу начал собирать. Возни много, а ремонт не сложный. Но далее проверяем все потенциометры на предмет шорохов)))
Nice work, not a fully restoration, buy very satisfying video
Хороший пульт, довелось поработать на таком
Я работал именно с такой консолью в начале девяностых---прекрасно звучит!В начале двухтысячных отправил старичка на склад,а пять лет назад закупил запчасти(фейдера,потенциометры чутья,кнопки),и полностью восстановил VLZ!!!Сейчас он трудится у друга в кафе на караоке!
@@сергейпопов-п3м на пультах этого производителя метла все свои легендарные альбомы записала. Этому старичку не то что в баре - в студии трудиться не стыдно! 16 каналов конечно не много, но для драмсекции достаточно - 8 микрофонов на сквозную запись и 8 каналов на постобработку в основную консоль.
да это хорошая вещь микшерный пульт управления с двумя блока эффектов стерео
Bravo 👏 👏 restauro davvero impegnativo... 😉 Complimenti
Thats exactly the model i have AND irá damaged todo, i hope found some one like you to repaired It, but i Will try..thanks a lot
awesome! Brought it back to life.
อยู่ที่ไหนครับ ล้างมิกซ์ตัวนี้ราคาเท่าไหร่ครับ
Yes ..Gogo my friend ...Indonesia.. 🙏👍
What a great job it's gods gift to you😮😮😮❤❤❤
super cu ce solutie ai curatit palca cu volume
si potentiometri te rog
Complimenti davvero👏👏
Ottima restaurazione👍
Questo mixer lo vendete?
congratulations great job 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🇧🇷
Wow! Nice work. 👍
What cleaning solutions did you use? I have a Mackie 1202-VLZ and want to open it up and clean it, but it’s my first time doing anything like this. Almost everything works just fine except for a couple of channels having messed up stereo/panning. I’ve seen a lot of people talk about depict for the jacks but idk which one to get. Any help?
He used soap and water for the case, and prob ISO alcohol for the electronics cleaning.
why you not cleaning/repacing faders and potenciometers?
I Love Sound System
Congratulations great Powerful work now
what desoldering gun is that? in the market for one just like that
Mixser lengendaris meckie
Esto es satisfactorio!
I love maki mxsar me
Good job
Before you tore it all apart I would have fixed the obvious power supply issues first and tested and evaluated the rest. Then used a vacuum while getting the dust off the faders instead of getting it everywhere, perhaps even into the faders. We didn’t need to see you takeoff every single knob. But I hope it was worth it when you can get these off eBay in decent working shape for around $300.
Lmao shut up nerd
More like $20. For 300 you can get a Midas Venice or an older DDA, real, proper mixers. This one is school band/rehearsal-grade stuff.
Yo guys, I 'Ve got the same mixer, and want to restore it. The only thing which isnt working properly are the gain knobs. Doesn anybody know which exact gain knobs i am looking for if I want to resolder them? The ones which are currently built in seem to be corroded.
Best regards and thanks in advance!
Excelente trabajo 👌
Semoga tambah ilmu
Растягивать хронометраж до такого времени) Для чего? Чтоб показать, как все кнобы вытаскиваете? Сняли пару, да пропустили... Приходится перематывать...
Great video!
20:52 which spray is that one?
It looks like a lacquer or some silicone spray
What happen if loost sound on right channel volume dose it need new part
你好，请问你这个清晰线路板用的是什么液体，可以指点一下吗
I have 1of these...great sound
No idea how you make any money in that with all the time and labor spent, but very cool!
You need a special meter to test ESR and capacitance of electrolytic capacitors. What are you testing on these caps with such a basic meter? Electrolytics rarely fail short circuit. 15:11
I must of recorded over 150 bands and artists on one of these for the Sun Newspaper in the UK, awesome little desk. If you are interested, search for Sun Biz Sessions on UA-cam, there were a load of them ripped from the Sun's website.
PARABÉNS, FICOU TOP DE +++++
Usually nobody would restore a unit like this, it's less expensive to buy another comparable mixing console.
But interesting to see, what is possible.
Less expensive than what? The basic tools he used?
The one thing you didn't do (which is absolutely essential) is to clean out the quarter-inch jack sockets, cos they're gonna be very corroded inside and won't give a good connection. You can get a special tool to do it.
So you are basically saying th one thing that wasnt done was "restoring" the console then?
Seen how "crusty" the faders are I wouldn't worry about the the jack inputs.
This issue I have with my desk what would use to clean it ...
I have a Mackie 32/8 bus would love for him to fix it
Attaching the regulators to the heat sink before soldering is a better idea to be sure there is no constraints on the PCB...
Mình có amply peavey 680. Sếp có nâng cấp dc ko, nó bị hú, revert ko hay
B gửi mình làm cho
I need this machine now
FANTÁSTICO!
tem pecas reposicao vender ainda tenho mesa desta esta defeito
Bravo bravo bravo
Bro in my church yamaha mixer is making problem I want technician like you 👍👍
do you have an address to go to your online store?
Great job!
My only comment is USE A SOLDERING IRON and not a gun. A gun can introduce voltage that can ruin FETS. I worked for Heathkit for 15 years doing component level repair and it never failed. LOVE THE VIDEO
Great job.
Mantap bro
do you sell those?
Excellent job 👍
I always wonder, wher e do you get these electronics to repair?
And now for the 32ch 8bus :D
Wow, you cleaned a mixing console 🤦♂🤦♂🤦♂🤦♂🤦♂🤦♂ Oh, and I've just thrown away one of these desks. 🤣🤣🤣🤣🤣🤣
😊👍🏻
Awesome job
A belleza me ade fayuna consola de esta
I'm your fan
Really super
Music artist watching this video : mm, interesting ☺️
How to adjust the effect sir
👍👍👍👍👍👍👍👍👍👍
Ini power badak yg 25000 Watt GK Adak bang.
Good nice bossqu
krásná práce jen by mě zajímalo jak jsou na tom ostatní kanály
My guy, that thing looks like it controls a nuclear reactor
It's an analog audio mixer 😂
süper ışcılık yaptın elıne saglık
amazing
👌
service can or not
Very good.
impressive! I
Excelente
How much price this machine now