TI-84 Plus Graphing Calculator Guide: Statistics

Поділитися
Вставка
  • Опубліковано 29 чер 2024
  • This is a walkthrough of the statistics features of your TI-84 graphing calculator. For more resources, go to: www.centerofmath.org
    You can jump to a specific topic by clicking one of the links below:
    Entering Data into Lists: 0:18
    Plotting Data: 1:38
    Linear Regression: 3:23
    Descriptive Statistics (Mean, Standard Deviation etc): 7:21
    This is Tom from the Worldwide Center of Mathematics walking you through important and useful features of your TI-84 graphing calculator.
    This TI-84 plus graphing calculator series is meant to be an instructional walkthrough that covers some of the most often used functions on a TI-84. This particular video covers statistics and shows the viewer how to enter data into lists, plot data, and calculate descriptive statistics. The software used in this video is TI-Smartview.

КОМЕНТАРІ • 54

  • @missme9551
    @missme9551 3 місяці тому +3

    Thank you , needed this clarification right before an exam😉😊

  • @coreygraham5485
    @coreygraham5485 3 роки тому +4

    thank you so much. been searching for the last half hour trying to figure out how to store data in the y list.

  • @catfishery2690
    @catfishery2690 3 роки тому +3

    this is exactly what i needed, thank you for saving another life

  • @pizzadaddy2934
    @pizzadaddy2934 5 років тому +17

    DUDE, YOURE MY F***ING HERO!!!!!!!!!!!!!!!!!!!

    • @dalisabe62
      @dalisabe62 3 місяці тому

      Dude, you are my awesome hero could’ve been more appropriate, but I get what you are saying. It was a great presentation!

  • @anavh8067
    @anavh8067 3 роки тому +2

    I just reset my calculator and was looking for this video. Lifesaver.

  • @andreasavage3463
    @andreasavage3463 4 роки тому +36

    SUPER HELPFUL!!!! Thanks so much for doing this... I was ready to throw my calculator out the window until I watched this.

  • @NahBruh303
    @NahBruh303 4 місяці тому +1

    Ik this is old but fan-frickin-tastic video man

  • @a.nu_day
    @a.nu_day 4 роки тому +3

    Thank god I needed this

  • @JamesEnTennessee
    @JamesEnTennessee 2 роки тому +7

    Thanks for sharing. Can you also do probabilities on the TI-84?

  • @donaldbridgeman8424
    @donaldbridgeman8424 9 років тому +3

    Liked your first 2 videos...

  • @phillipally3044
    @phillipally3044 3 роки тому +1

    Bruh this man is a legend

  • @meenu2002c
    @meenu2002c 3 роки тому +2

    SUPER HELPFUL!!!!

  • @roselovessims
    @roselovessims 3 роки тому +1

    Thanks for this video it saved my behind.

  • @ajsullivan8590
    @ajsullivan8590 3 роки тому

    I heart you!!!!! thank you for this video!! SOOO helpful!!!

  • @MrWinter2
    @MrWinter2 3 роки тому

    AHHH, THANK YOU SO MUCH!!! You saved me!!!!!!

  • @zmby6785
    @zmby6785 3 роки тому +4

    watching this one hour before the exam :P

  • @aprilcanadian
    @aprilcanadian 6 років тому +1

    That was awesome thanks

  • @kallocarina8879
    @kallocarina8879 3 роки тому +5

    When I pressed the LinReg(ax+b) option, it didn't give me the screen for putting in where to save it. It just calculated it without asking me for any data pools

  • @WOLF125O
    @WOLF125O 2 місяці тому

    Excellent !! Thanks.

  • @MRGAMER-cp3ps
    @MRGAMER-cp3ps 5 років тому +1

    Thank you

  • @reneevincett1880
    @reneevincett1880 3 роки тому

    ur my life saver

  • @gkurtz2726
    @gkurtz2726 Рік тому +2

    Diagnostic on can be turned on in the MODE function; if you use the catalog you can access directly to it by Judy hitting the letter and it will go to that start - in this case just touch the letter D

    • @Qrow022
      @Qrow022 Рік тому

      Thank you! This fixed my error domain when I used Stat Test 6 and B

  • @DebbieFBI
    @DebbieFBI 8 років тому +8

    how would you find the mode? do any of those symbols represent that? thanks for the video :)

    • @alfonsorossi_e398
      @alfonsorossi_e398 7 років тому +1

      I dont think there is a specific function for that! Yet just look for the value that appears most in the data set and that will be the mode!
      - Hope this helped

    • @johngambino5105
      @johngambino5105 4 роки тому

      There is no symbol on the screen for Mode. But you can go back to the main STAT screen and use the SORT(A) or SORT(D) feature to sort the data in a particular list either in Ascending order or Descending order. Once that is DONE, go back to the list and it will be sorted. Then just scroll down the lost and count the one that appears the most times.

  • @capyb4raa
    @capyb4raa 4 роки тому +1

    thankies

  • @ashcrouch6755
    @ashcrouch6755 2 роки тому

    How did you record the calculator and screen on your computer?

  • @marissahuish5461
    @marissahuish5461 3 роки тому +1

    which of these would show variance? my teacher taught us that variance was s^2 but that is not written anywhere in the TI-84 calculator for the 1-var function.

    • @whyisgamora4191
      @whyisgamora4191 2 роки тому

      You can easily calculate the variance if you have the standard deviance.
      Sx = √S^2x ----> so if Sx = 2 then S^2x = 2^2

  • @kimvangvideomarketerbangko3265
    @kimvangvideomarketerbangko3265 3 роки тому +3

    4:18 I don't get up this list after clicking LinReg(ax+b). I'm using a normal TI-84 plus though, is that why?

    • @jonjensen2464
      @jonjensen2464 3 роки тому +1

      This is a feature called "Stat Wizards" which is available on some but not all earlier versions of the TI-84, you can look for it in the MODE menu or in the CATALOG. If it is not available on your calculator you simply enter the arguments at the cursor separated by a comma.

    • @kimvangvideomarketerbangko3265
      @kimvangvideomarketerbangko3265 3 роки тому

      @@jonjensen2464 Great, thank you!

  • @ashleyg429
    @ashleyg429 3 роки тому +3

    Thanks! I somehow couldn't find "stat"

  • @Logan-zf1ft
    @Logan-zf1ft 2 роки тому

    Ay yo you are a legend

  • @pumpkinwooog
    @pumpkinwooog 3 роки тому +1

    WHERE DO I GO TO FIND THE WEBSITE OF CALCULATOR

  • @makegalla371
    @makegalla371 Місяць тому

    Hii. I have this old model of calculator but when I enter the menus like the 4:LinReg (ax+b) menu in CALC it doesn't show the settings of the lists and instead it shows a kind of configuration for the menu and it makes me write everything and gives me an error. Do you know why is that?

  • @treebythesea8315
    @treebythesea8315 2 роки тому

    Thanks Morty

  • @chicken_nugget8743
    @chicken_nugget8743 Рік тому

    Thank you bc my math teacher is terrible at explaining

  • @hzhshzhisnnsns5588
    @hzhshzhisnnsns5588 6 років тому +1

    Albashir do you understand?

  • @calebdejoun939
    @calebdejoun939 7 років тому +6

    dang bro that calculator be so confusing and very complicated

  • @benfisher9322
    @benfisher9322 4 роки тому +1

    Goddamm hero

  • @AlexanderNejadeh
    @AlexanderNejadeh 5 років тому +1

    Refresher Stats.... :( It has been 1989 since I had taken this stat class

    • @cabfare4601
      @cabfare4601 5 років тому

      do you mind my asking why you have to get reacquainted with it? just wondering if you're using in a real-world application

    • @jonathangonzalez3827
      @jonathangonzalez3827 4 роки тому

      he has a good question

  • @carolynberger2505
    @carolynberger2505 5 років тому +1

    I'm so lost. I beginning, my 2nd key did not take me anywhere

  • @irishchocolate3872
    @irishchocolate3872 7 років тому +7

    This calculator actually is not the best choice for statistics. If you do multiple statistics problems, cumulative error results. This is even after clearing your lists. The only way I have found to correct this is to reset the ram. The only problem with that is then you lose all your programs and data. I would not trust this calculator on a statistics exam.

  • @calebdejoun939
    @calebdejoun939 7 років тому +1

    if that calculator can do all that mean it should be called a phone