How to Replace Camshaft Position Sensor 2009-2020 Dodge Journey
Вставка
- Опубліковано 4 жов 2024
- Buy Now!
New Camshaft Position Sensor from 1AAuto.com 1aau.to/ia/1ACP...
This video shows you how to install a camshaft position sensor on your 2009-2020 Dodge Journey. For vehicles with electronically controlled timing, a camshaft position sensor relays important information to the computer to ensure the engine is running properly. A bad sensor may relay incorrect or no information, resulting in poor running conditions and trouble codes.
NOTE:
The Cam/Crank Variation Relearn procedure must be performed using the scan tool anytime there has been a repair/replacement made to a powertrain system, for example: flywheel, valvetrain, camshaft and/or crankshaft sensors or components.
This process should be similar on the following vehicles:
2009 Dodge Journey
2010 Dodge Journey
2011 Dodge Journey
2012 Dodge Journey
2013 Dodge Journey
2014 Dodge Journey
2015 Dodge Journey
2016 Dodge Journey
2017 Dodge Journey
2018 Dodge Journey
2019 Dodge Journey
2020 Dodge Journey
Tools you will need:
• Pocket Screwdriver
• Pry Bar 1aau.to/oa/1AXA...
• 13mm Wrench 1aau.to/oa/1AXA...
• 15mm Wrench 1aau.to/oa/1AXA...
• 10mm Socket 1aau.to/oa/1AXA...
• 15mm Socket 1aau.to/oa/1AXA...
• 19mm Socket 1aau.to/oa/1AXA...
• 8mm Socket 1aau.to/oa/1AXA...
• Dead Blow Hammer 1aau.to/oa/1AXA...
• Serpentine Belt Tensioner Tool 1aau.to/oa/1AXA...
• 3/8 Inch Air Impact Gun
• Ratchet 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Brass Punch
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
My Dodge Journey 2015 Camshaft Position Sensor, keeps going bad. Help is much appreciated!
You sure that’s not the crank sensor? Aren’t both cam sensors on the heads?
The first thing you need to do is figure out what year your working on this kind of moter because I've got a 2014 Dodge journey and I'm going to step by step with you and you're not giving me the correct location of that sensor
So not sure what year this vehicle is but you don't have to do the majority of this cause the sensors are ontop of the motor under the upper intake on a 3.6l
Thank you so much very helpful video and also the list of tools needed 👌🏽
On these videos you should say what sizes you need! For everything. Not just some things!
What is the purpose of removing wheel and splash shield . When all he did was remove the belt and alternator
2011 Dodge Journey 2.4L does not have the sensors there, the alternator is not in the clear as in that video as well. And though I did not find the sensor as in this video it did help me identify a defective idler pulley. I suggest revising the video title.
Best video ever
This info is for the v6 the 2.4l has two one on the back right and one on the front left of the engine
isnt there 2 sensors?
Thank you
You put all kind of info, but no engine size, since you only replaced 1 sensor im going to assume its the 4 cyl
47 THOUSAND VIEWS.....
I don't know what you're working on but it looks nothing like my 2015. I know it's been two years but damn. At least update your title and description.
ISN'T THAT THE CRANK SENSOR BECAUSE THE 2 CAM SENSORS ARE ON THE DRIVER SIDE FRONT AND REAR SAME SIDE THERE'S 2 CAM SENSORS NO ALT REMOVAL NEEDED LOL
Is this the 2.4? Looks like
Is the 3.5 just did the sensor on mine
@@jordanbeardsley2474 did you have to take everything off or did you do it where you just go under
@@jordanbeardsley2474 what symptoms did you have?? How did you know it was the sensor obviously you will get a code but I mean how was it driving??
Where are the crankshaft postions sensors
WOW!!!!!!! THIS NOT A DODGE JOURNEY
This is the 2.4L…only 1 sensor
Something wrong here this isn't a Dodge at all! You need to revise this video to whatever car this is 🤔
It is a DODGE.😂😂😂