🔗 Check for updates on mib-helper.com/ 🔗 Download firmware updates on mibsolution.one/ 🛒 Buy OBDeleven here (ref): mr-fix.info/redirect/obdeleven 🎟 Get 10% OFF with code: MRFIX10
Hey! I tried to disable amplifier (sound) before I update the firmware as you described however even after the mmi reboot sound still active, even though the most is on *off*. Do you know why? I do use obdeleven next generation. Can I update the firmware when the sound is working or will I get sound issues after upgrade firmware ? My car is Audi Q5 S-line, 2017 08-30. The new model. Can you please help ? What do you recommend?
Love that these aren't your typical UA-camr steps/setup..... These are very detailed instructions.. Glad to see your continued updates for almost all, if not all, of these Audi platforms.
@@geoffhoward2171 Perhaps, knowing what vehicle/platform you drive, will help identify which direction to point you to. Or least try to help in the process.
@@Kiss__Kiss I have an A3 8v and would like to update my maps. My MMI is MHI2_ER_AU37x_P5089 Software 1326 License 0230002a Legal Current maps are ECE 2018/2019
I wish i would have waited for him. I spent two weeks figuring out how to do this and using his videos managed to figure it out. But my car is also an S3 2017 and the same software! 😂😂 i only managed to finish it two days ago, just waiting for maps now 🤣🤣
Just FYI for those of us with B9 cars with the MHI2 Harman units, that folder on mibsolution is blank. Was pretty sure it contained the latest updates a week or so ago, but it's just an empty folder at the moment. However, the toolbox is fantastic, and I was able to patch my unit and install the latest maps and turn on dual nav, which is fantastic.
Can you please provide more information on how you managed to patch your unit as I am currently struggling because of the empty MHI2 Harman folder Thank you!
Great video tutorial! I did update the maps on my A5 but never update the FW. What would be the benefits of a FW update? Is for example the maps SW expected to perform better (e.g. routes computation and so)?
WARNING: I tried to update my Audi a3 using this website and now I am stuck in a boot loop and can't use my MMI system anymore. I can't even listen to music. Also it keeps rebooting eventhough I turn of the car. Even Audi do not know how to fix this, so I would recommend giving this an extra thought before doing this.
I wish i would have waited one more week before i did mine,…….this is the exact same as mine and same car!……S3,….🤣 Just to add, this update that mr fix just did also fixes the satellite maps! Just waiting for the new video on how to update maps for this car. (Hopefully next week)
Great video. Thank you! I have an Autel MaxiSys 808mk scanner. Can I disable the amp with that? Otherwise, where would I find the connection to disconnect it on a 2017 A4?
Hi, i have audi s5 2018 b9 i bought it from USA my version is MHI2Q_US_AUG22_P5087 I want to change it to ER version should i download same MHI2Q_ER_AUG22_P5087 And install it on top and afterwards install all maps and other stuff? Thanks for answering cheers!
I have MHI3 touch screen running MHI3_US_AUG45S_P3243 (this must be the original version from 2020 when my S4 was delivered). I see under MQB_Solution\MHI3\MHI3_US_AUG45S_K3281_8W0906961B from FEB 24, 2022 - would this work? I do have B&O sound system, no ODB11 but VCDS, so I'm assuming I would need to disable F5 -> Long Coding -> BYTE 19 -> BIT with MOS -> OFF then load the update on a USB stick (no SD card support in B9.5). There are is no REM, update can be initiated directly from MMI. Will this work?
Many thanks for this great video! I get an error message in OBDeleven when trying to add the new 5F adaptation key a273 to replace the old 6ba1 - error message (31) Function not available. I did not update the mib ,only added the maps fec. Perhaps this error code has been there since the dealer updated the mib as part of the maps update 2 years ago? First time I used obd as well now. Can you suggest a solution please. Many thanks
thanks for video. There is a warning message in many sources saying 'It is not recommended to flash with running engine!. but you did not. does it matter?
Hi. I have a 2016 Audi A6 with MHI2_US_AU57X_S0536. MIB-Helper indicated that the latest official firmware update is MHI2_US_AU57X_K3341. However, when I attempt to update, I receive an error: "A variant conflict occurred! Main unit variant: MHI2_US_AU57X_S0536. Version description variant: Train is blocked." Can someone help me, please?!
Thank you, it worked fine, however, it didn't update all the items. But in general the Firmware is now OK. Old firmware Firmware version: P4212 (MU: 1177) new Firmware version: P5092 (MU: 1329). Could you help with updating the ROW Map? Thanks from a Brazilian
Olá, tudo bem? Estou tentando realizar o update, porém, a opção de Iniciar o Update está cinza... Não consigo selecionar o sd card como ele no vídeo... Você chegou a passar por isso? Abraços.
Thank you for this extremly detailed and well explaining video tutorial. My question is whether you consider the sound disconnection also necessary for the standard audio? that means my A3 does not have neither Bose nor Harman/Kardon, but just basic standard amplifier. Thank you for your reply.
Thank you very much..... Very accurate and concise helped me upgrade to the latest MHS2_ER_AU_P2035 version on a Q2. One question came up watching your video. I have installed an Alpine KTA-450 external amplifier - and every time car switches on an annoying "clicking" noise comes from the speakers. Same happens when driving and "start-stop" comes up. Do I need to do any changes with OBD 11...??? Have not been able to get anywhere asking......Thank you so much in advance.....
Hi, I have Audi S3 2018 8v with MHI2 ER AU37X P5089 and I would like to update the firmware and unlock the Audi smartphone interface. my software is the only one present in the MIB Solution menu to download, I don't see a newer one, do I have to download this one again? from the green menu I managed to make it appear in the menu but it doesn't read it to me when I connect it to the
Stick with P5089. Newer firmware was seen on production vehicle but not yet as a customer update. Do this: ua-cam.com/video/rzOmVFBbDNg/v-deo.html it generates all missing supported feature codes.
@@mrfixpl Hi, sorry, I have a further question, I repeated the procedure, the licenses are active including those for updating the maps; the only problem is that in the green cable that I use for CarPlay, I have no power at all and it doesn't detect my phone. ps: I had already done the wiring before installing the Audi smartphone menu and I wanted to ask if it makes a difference. Thanks in advance
mr-fix, can you check if there is any update to firmware for Q7. In the list on Mibsolution, there is only MHI2Q_ER_AUG22_P5092, while on Mib-helper, you see that there is MHI2Q_ER_AUG22_P5152.
Hello, great and detailed video my questions: 1. Is it possible to simply uncheck amplifier firmwares before starting update in update menu without obdeleven or phisically removing optical fibre in MIB systems (1, 2 and others). Can you do that in MIB and if you cant, is it way to do this without OBDEleven. 2. Is this amplifier problem just on Audi or whole VAG group. I didnt see video where you do this for instance on VW or Škoda (they can have Dynaudio or Canton etc) Thanks
You are very good, dealerships in Brazil charge absurd amounts. I saw in some videos that the card for this procedure needs to be an SD card. I'm using a MicroSD, is there any difference in the procedure?
Swietny tutorial 👍 Co tak naprawdę zyskujemy robiąc ten update? Na pewno zrobię mapy z najnowszego video ale zastanawiam się czy update softu cokolwiek mi daje. Dzięki.
U mnie porównując bardzo stary soft z tym świeżym widzę sterowanie subwooferem (nie było go wcześniej), zamiast Google Maps jest opcja Mapa Satelitarna (teraz dostarcza je HERE maps). No i system jakoś tak szybciej działa.
I love how you explain everything super . I have a question maybe you can help how can i update the cockpit on my audi a4 b9 2016. And about the navi can you do a video about to update it. Many thanks and keep it up
Hi Mr-fix! What can I do if the update get stuck and it simply don’t restart coming back over and over to a blue screen with “waiting for RCC to enter emergency mode“ Tried it on a A4 2017 with the version MHS2_ER_AU_P0470
Hi. I'm stuck. I have a 2016 Audi A6 with MHI2_US_AU57X_S0536. MIB-Helper indicated that the latest official firmware update is MHI2_US_AU57X_K3341. However, when I attempt to update, I receive an error: "A variant conflict occurred! Main unit variant: MHI2_US_AU57X_S0536. Version description variant: Train is blocked."
Witam. Przepraszam że nie na temat ale szukałem już wszędzie i nic. Audi A6 2016 po dotknięciu manetki kierunkowskazów są 3 mrugnięcia. Czy da się zmienić na 5 mrugnięć w OBD11? Dziękuję i Pozdrawiam
@@sektorp ten poradnik nic nie da. Audi A6 i Seat Arona to dwa zupełnie inne pojazdy, które mają ustawienia w zupełnie innych miejscach. W Audi A6 4G jeszcze szukam.
Train is blocked. Kolego tu chodzi o kolejność. Jeśli masz MHI2 ER_AUG22_S2148 to czekają cie dwie pośrednie aktualizacje zanim zaintalujesz najnowszą. Najpierw zainstaluj MHI2_ER_AUG22_K2161_MU1421 (A4-A5-Q5-Q7) następnie MHI2_ER_AUG22_P3241_MU0678 (A4-A5-Q5-Q7) a dopiero najnowszą MHI2_ER_AUG22_K3346_MU1438 (A4-A5-Q5-Q7) która ma 2.7 GB
Hi, can you please tell me which component to disable (in installation list) before installing P3663 to A6 C7 with Bose System to avoid the amplifier issue? Thank you!
Hello, great video. After unit update my navigation, sign reading, bluetooth and some other features dont work. Is there a solution fot this problem? Please help, thank you.
Do I have to disable audio amp, what happens if not? Also this is new software available for my car: MHI2Q_ER_AUG22_P5152 but can’t find it. Currently:P5092
If you update amp, you will have no sound until you upload parameterization with ODIS or VCP. Check mib-helper.com - it will show you if there's newer firmware available.
Jak to wygląda z aktualizacjami map np. Audi MMI. Pliki z aktualizacją map wrzucam na nową kartę SD która ma zduplikowany CID oryginalnej karty SD i nowa mapa się nie uruchamia. Stare mapy działają na karcie ze zduplikowanym CID. Przykład z RMC z Navi.
Hi there, I hope that you could resolve my query! I have an Audi A4 B7 imported from Japan to New Zealand. I need to update firmware of my vehicle from Japanese one to One suitable for NZ, I’m guessing it would be RoW and then GPS maps update from Japan to Nz! Could you please guide to with this?
Quite new to all of this but managed to update my MMI software on my audio q7 MHI2_ER_AUG22 then installed M.I.B to get the lifetime map updates and Android auto etc then installed the latest 2024 maps and POI At the time I didn't realize that there was a newer MMI update than the one I installed, so I tried to install the newer version but get a warning message Warning: downgrades not selected for download found, obviously I don't want to proceed but just wondering if it is because M.I.B is installed and needs removing first. Any advice would be much appreciated Thanks
I have a question regarding fuel consumption display. I recently bought an Audi A3 2014, it's an Ultra model. The driver display only shows fuel range and reduced display, when I cycle through from steering wheel. Is it only on premium versions of Audi A3's? It really drove me nuts. I read the driver manual and researched all over the internet but to no avail. I appreciate any help you can provide in this regard. Thanks.
What about for HN+R_EU_au_k0770 version (u had video about it how to enter red menu 6 years ago)? when u enter it - it shows its invalid, cant find any updates?
@@mrfixpl yes I know, it was in pre facelift models. I guess its quite useless system, just because of its experience I am never getting audi ever in my life. It looks like 2005 or 2009 tech.
Hi, it seems that mibsolution website does not have any files only folders and they all are empty... In some comment i saw that server migration was happening about week ago, maybe it is still in process?
My version is Pxxxxx in the end. Is there a compatibility problem if the most recent version is Kxxxxx in the end? Do I have to choose a version with the letter P?
Hi! I have A6 (2016) with the K3663_1 updated with your help. Thanks a lot for that. The mib-helper says I can update it to P3663. Is that true? I dont want to make it wrong
Zaktualizowałem wersje MHIG_EU_AU_K0337 do MHIG_EU_AU_K1555 w A3 8V 2013. Wszystko sie powiodło, czas 38 minut, świetny poradnik. Niestety u mnie bez żadnych zmian, brak nowych funkcji ani szaty graficznej. Karta SD SanDisk 32GB V30.
hi, my b&o was accidently included the update firmware MHI2_US_AU57X_K3341 and now sound quality andd volume is very low, what do I need to do to get this issue fix? appreciate any help.
Why do we need to update the firmware? Please can you let me know the benefits. Does your mirrors fold by the way? I can’t figure out if my car doesn’t come with the feature or the firmware needs updating
Hello, is it possible to "reinstall" same version of Firmware? After trying to do mod with MIB with EE licence, I've got info that some file is not correct and I need to reinstall firmware (in the past, audi interface was added and probably there is not recognized patch in FW). During instllation of the same FW, I've got info that everything is "up to date" and "start installation" button is not available. Anyone?
Thank you for this tutorial. I successfully updated my 2014 S3 (MHIG) from P1048 to K1555. It all went well, disabled MOST, etc. Only issue I'm having is that my reverse camera has stopped working! I still get an image from the camera but it's distorted and glitchy. Anyone heard of this happening before? The camera worked perfectly before the update.
hi. this was a great video like all your videos. Can you recommend something to convert MMI from Korean to European, including Maps, Radio frequency etc? thanks
Hello, I have the 2017 S3, but American version. I have the firmware version P5107, so I see that they have a new on a on mibsolution, but the version have a different letter (K5512_1). is the latest one for me or I only can update to P versions?
Greetings friend, excellent video, do you know if there is a patch for SD to eliminate component protection for mst2 US vw pq p039t the radio 5K7035200F???
Hi there, many thanks for all the videos they are ALL very useful. I bought a new to me Audi A3 8v which has very old maps installed, I decided to update the maps, but in order to be able to update these, I first had to install the hack to get the lifetime activation key for maps, but I did not know if it “safe” to do this with the old firmware installed in the MMI of my car (P4159). As I don’t have or plan to buy the OBD Eleven, I tried to remove MOST from amplifier using VCDS but when entering the Long Code Helper my VCDS cannot read the bytes correctly so I don’t get any “help” to know what each tick is. With all that in mind I decided to remove MOST fiber cables from the main unit and run the update. It started well but in the second module it stopped and said something like “MOST is unstable” do you want to proceed with installation or cancel, at that moment I shat my pants and hit cancel. The installation updated the first module (with me still all shat still) and rebooted to tell me the first module was “OK” and from there on “NOK” just like that. I managed to get out of the installation but now I get an error though VCDS saying that some components are not updated (1 Fault found 1555-Check Software Version Management) My question is, is it safe to run the update with that “MOST unstable” notice? Is that notice because the fiber optics have been removed from the main unit if you know? Many thanks in advance for the help and sorry for the long comment…
Hello! I have MST2_EU_AU_P0962D, will I benefit to having some extra features if upgrading to MST2_EU_AU_P0965D? It seems to me that there would be almost no difference
Witam, mam problem zainstalowałem sobie nową wersje systemu ale nie działa mi głos w aucie a przed aktualizacja nie wyłączyłem tego audio amp i po aktualizacji nie włączyłem ponieważ nie posiadam OBDeleven, czy jak kupie i podłącze i zrobie tak jak na poradniku to wróci mi dźwięk? już nie wiem co robić i jak to naprawić prosze pomóż mi jakoś (mam też problem z mapami bo sie nie pokazuja wyskakuje blad podczas ich ladowania) bardzo mi zalezy na naprawieniu dzwieku, prosze o pomoc jakąś
Please help me: I have MHI2_ER_AUG22_S2116. I want to update my maps: Do i need to do it in this order?: 1) firmware update (which one to use? there are 6 of them? 2) install M.I.B along the "patches" and apply patching 3) copy & paste maps (~26 GB) to sd card and start with the update of maps? p.s. i don't have "key #023000EE" in red menu. Thanks!!!!
Hey, thanks for the video, everything well explained! I don't have OBDeleven or VCDS, so I cannot uncheck MOST so I doesn't update my B&O sound system. Is it possible to deselect the amplifier update through the red menu or remove the AMP and Bose folders from the SD card so there is no update files for the amplifier?
🔗 Check for updates on mib-helper.com/
🔗 Download firmware updates on mibsolution.one/
🛒 Buy OBDeleven here (ref): mr-fix.info/redirect/obdeleven
🎟 Get 10% OFF with code: MRFIX10
Hi Hello mr fix Love your work keep it coming🔥. Anyway I need help with toolbox install. Its show N/A on all The files.
Error code undefined error 14. Please help for audi a4 b9
😮
Hey! I tried to disable amplifier (sound) before I update the firmware as you described however even after the mmi reboot sound still active, even though the most is on *off*. Do you know why? I do use obdeleven next generation. Can I update the firmware when the sound is working or will I get sound issues after upgrade firmware ? My car is Audi Q5 S-line, 2017 08-30. The new model. Can you please help ? What do you recommend?
Love that these aren't your typical UA-camr steps/setup..... These are very detailed instructions.. Glad to see your continued updates for almost all, if not all, of these Audi platforms.
I am finding the extremely difficult to follow, to the point of not being able to identify what files or links to follow to download.
@@geoffhoward2171 Perhaps, knowing what vehicle/platform you drive, will help identify which direction to point you to. Or least try to help in the process.
@@Kiss__Kiss I have an A3 8v and would like to update my maps. My MMI is
MHI2_ER_AU37x_P5089
Software 1326
License 0230002a Legal
Current maps are ECE 2018/2019
Congrats on getting your S3. Long wait :)
I wish i would have waited for him. I spent two weeks figuring out how to do this and using his videos managed to figure it out. But my car is also an S3 2017 and the same software! 😂😂 i only managed to finish it two days ago, just waiting for maps now 🤣🤣
Great Video. Just updated 2018 Q7 from 1118 to 1316 with success.
Hello. Kindly, could you tell me if you have been disabled the sound amplifier during the update? Thanks
Perfect! Very straightforward using your instructions, and went from MHS2_ER_AU_P1242 to MHS2_ER_AU_P2035 on my 8V S3 FL (2018). Thanks so much.
Thanks
Just FYI for those of us with B9 cars with the MHI2 Harman units, that folder on mibsolution is blank. Was pretty sure it contained the latest updates a week or so ago, but it's just an empty folder at the moment. However, the toolbox is fantastic, and I was able to patch my unit and install the latest maps and turn on dual nav, which is fantastic.
Can you please provide more information on how you managed to patch your unit as I am currently struggling because of the empty MHI2 Harman folder
Thank you!
Great video tutorial! I did update the maps on my A5 but never update the FW. What would be the benefits of a FW update? Is for example the maps SW expected to perform better (e.g. routes computation and so)?
Did you found any benefits, I was just wondering the same thing?
WARNING: I tried to update my Audi a3 using this website and now I am stuck in a boot loop and can't use my MMI system anymore. I can't even listen to music. Also it keeps rebooting eventhough I turn of the car.
Even Audi do not know how to fix this, so I would recommend giving this an extra thought before doing this.
Sorry my friend. You are F***ed
Is your MMI sorted now??
Did you try to reboot yourself taking the sd card out to get out of the loop?
@@TheNewKallex what model
And year is your car? Did you figure it out?
I followed his instructions for the VCS and it worked flawlesly.
I've done on my Audi A6 2018. It really works well. Many thanks to Mr-fix. You are great man.
Did your system come with maps already before the update?
Worked perfectly for A5 2017. Thanks!
pomogi mne kak sdelat
Dzięki, jednak są wartościowe treści na YT:)
Hi, I have an old RMC system with Bose speakers, how do I disable amplifier updates in the hidden menu? I don't have an ODB...
Thank you
I wish i would have waited one more week before i did mine,…….this is the exact same as mine and same car!……S3,….🤣
Just to add, this update that mr fix just did also fixes the satellite maps!
Just waiting for the new video on how to update maps for this car. (Hopefully next week)
What about older generations? Want to update 3G high to 3G plus.
Hello, is it possible to roll back the firmware update? For example, to the original state, to the previous version?
Great video. Thank you! I have an Autel MaxiSys 808mk scanner. Can I disable the amp with that? Otherwise, where would I find the connection to disconnect it on a 2017 A4?
Hi, i have audi s5 2018 b9 i bought it from USA my version is MHI2Q_US_AUG22_P5087
I want to change it to ER version should i download same
MHI2Q_ER_AUG22_P5087
And install it on top and afterwards install all maps and other stuff?
Thanks for answering cheers!
Hey man, have you successesfully switched to the ER version?
I have MHI3 touch screen running MHI3_US_AUG45S_P3243 (this must be the original version from 2020 when my S4 was delivered). I see under MQB_Solution\MHI3\MHI3_US_AUG45S_K3281_8W0906961B from FEB 24, 2022 - would this work? I do have B&O sound system, no ODB11 but VCDS, so I'm assuming I would need to disable F5 -> Long Coding -> BYTE 19 -> BIT with MOS -> OFF then load the update on a USB stick (no SD card support in B9.5). There are is no REM, update can be initiated directly from MMI. Will this work?
I have only vcds too
My vcds didn't show the text in byte 19 which bit is it that needs unticking?
Jakie pliki odznaczyć, żeby nie robić updatu amplitunera? Jakaś nazwa typu amp coś tam? Czyli działanie bez OBD11.
@@Dude5 jakie pliki odznaczyles z ciekawosci
Thank you for this video! I have 2017 Audi A7 with Bose system. Will this brick my unit?
Hello Mr-Fix.
(External amplifier (Bose, Bang&Olufsen) might need dataset after update) how I do it on audi q7 4m 2016.
Thank you.
Skip amp update to avoid trouble.
Many thanks for this great video! I get an error message in OBDeleven when trying to add the new 5F adaptation key a273 to replace the old 6ba1 - error message (31) Function not available. I did not update the mib ,only added the maps fec. Perhaps this error code has been there since the dealer updated the mib as part of the maps update 2 years ago? First time I used obd as well now. Can you suggest a solution please. Many thanks
Do you have fault code B201A stored in the unit?
I managed to update the adaptation key, so all is good now. Thanks for your response, I appreciate it. 👍
Can i do this without the OBDeleven? or deleting the audio update file?
thanks for video. There is a warning message in many sources saying 'It is not recommended to flash with running engine!. but you did not. does it matter?
Hi. I have a 2016 Audi A6 with MHI2_US_AU57X_S0536. MIB-Helper indicated that the latest official firmware update is MHI2_US_AU57X_K3341. However, when I attempt to update, I receive an error: "A variant conflict occurred! Main unit variant: MHI2_US_AU57X_S0536. Version description variant: Train is blocked."
Can someone help me, please?!
Thank you, it worked fine, however, it didn't update all the items. But in general the Firmware is now OK. Old firmware Firmware version: P4212 (MU: 1177) new Firmware version: P5092 (MU: 1329).
Could you help with updating the ROW Map?
Thanks from a Brazilian
Olá, tudo bem? Estou tentando realizar o update, porém, a opção de Iniciar o Update está cinza... Não consigo selecionar o sd card como ele no vídeo... Você chegou a passar por isso? Abraços.
@@evandrocaires opa, fala mano, tudo bem? Sim e passei umas duas semanas até entender o que era, depois atualizei o mapa etc
Nice video, do i can use the some steps for my audi a3 (version 8y 2021) ?
Thank you for this extremly detailed and well explaining video tutorial. My question is whether you consider the sound disconnection also necessary for the standard audio? that means my A3 does not have neither Bose nor Harman/Kardon, but just basic standard amplifier. Thank you for your reply.
Basic audio system is using internal amplifier. There's nothing to disconnect. You can just update.
Salve non va disconnesso nemmeno se ho il sound sistem? Grazie!
Thank you very much..... Very accurate and concise helped me upgrade to the latest MHS2_ER_AU_P2035 version on a Q2. One question came up watching your video. I have installed an Alpine KTA-450 external amplifier - and every time car switches on an annoying "clicking" noise comes from the speakers. Same happens when driving and "start-stop" comes up. Do I need to do any changes with OBD 11...??? Have not been able to get anywhere asking......Thank you so much in advance.....
Hi, I have Audi S3 2018 8v with MHI2 ER AU37X P5089 and I would like to update the firmware and unlock the Audi smartphone interface. my software is the only one present in the MIB Solution menu to download, I don't see a newer one, do I have to download this one again? from the green menu I managed to make it appear in the menu but it doesn't read it to me when I connect it to the
Stick with P5089. Newer firmware was seen on production vehicle but not yet as a customer update. Do this: ua-cam.com/video/rzOmVFBbDNg/v-deo.html it generates all missing supported feature codes.
@@mrfixpl Hi, sorry, I have a further question, I repeated the procedure, the licenses are active including those for updating the maps; the only problem is that in the green cable that I use for CarPlay, I have no power at all and it doesn't detect my phone. ps: I had already done the wiring before installing the Audi smartphone menu and I wanted to ask if it makes a difference. Thanks in advance
Great job, what about MIB3 helper?
mr-fix, can you check if there is any update to firmware for Q7.
In the list on Mibsolution, there is only MHI2Q_ER_AUG22_P5092, while on Mib-helper, you see that there is MHI2Q_ER_AUG22_P5152.
Same case, I can't find MHI2Q_ER_AUG22_P5152 as recommended on Mib-helper?
@@mehdielotfiyou guys found a solution? I am having the same doubt shall i proceed with 5092?
Same here
hi, do i need to disable amp for stock speakers? or i just leave it on
Stock system (internal amp of the MIB unit) can not be disconnected as it's an internal part of the unit.
is it possible to update from customer type firmware to production one?
There's no difference betweet Customer and Production firmwares, AFAIK.
@@mrfixpl I've also heard that you can disable amp by modifying meta file. Is the removal of AMP related text and changing "SupportedTrains" enough?
Hello, great and detailed video my questions:
1.
Is it possible to simply uncheck amplifier firmwares before starting update in update menu without obdeleven or phisically removing optical fibre in MIB systems (1, 2 and others). Can you do that in MIB and if you cant, is it way to do this without OBDEleven.
2.
Is this amplifier problem just on Audi or whole VAG group. I didnt see video where you do this for instance on VW or Škoda (they can have Dynaudio or Canton etc)
Thanks
You are very good, dealerships in Brazil charge absurd amounts. I saw in some videos that the card for this procedure needs to be an SD card. I'm using a MicroSD, is there any difference in the procedure?
If the microsd is inserted in a SD adapter, as far as the car is concerned, it's an SD. You can go ahead.
Swietny tutorial 👍 Co tak naprawdę zyskujemy robiąc ten update? Na pewno zrobię mapy z najnowszego video ale zastanawiam się czy update softu cokolwiek mi daje. Dzięki.
U mnie porównując bardzo stary soft z tym świeżym widzę sterowanie subwooferem (nie było go wcześniej), zamiast Google Maps jest opcja Mapa Satelitarna (teraz dostarcza je HERE maps). No i system jakoś tak szybciej działa.
Salve con questo aggiornamento il controllo del subwoofer viene attivato anche su a3 1600 tdi del 2017 con sound sistem? Grazie!
Could you also show the coding on VCDS to tclear faults for people who do not have OBD11 Great video tho!!!
The names of the bits are the same in vcds as in obd11
I love how you explain everything super . I have a question maybe you can help how can i update the cockpit on my audi a4 b9 2016. And about the navi can you do a video about to update it. Many thanks and keep it up
Hi Mr-fix! What can I do if the update get stuck and it simply don’t restart coming back over and over to a blue screen with “waiting for RCC to enter emergency mode“
Tried it on a A4 2017 with the version MHS2_ER_AU_P0470
Hello Can we active car Play for Audi TT MK3 SLINE 2019 ? Thanks
Check your firmware and let me know.
Great video, thanks. Do you know how we can put the navigation into the A3?
Hi. I'm stuck. I have a 2016 Audi A6 with MHI2_US_AU57X_S0536. MIB-Helper indicated that the latest official firmware update is MHI2_US_AU57X_K3341. However, when I attempt to update, I receive an error: "A variant conflict occurred! Main unit variant: MHI2_US_AU57X_S0536. Version description variant: Train is blocked."
Amazing video tutorial!! Thank you
PAge with update isnt working. Have somebody another link or cloud ?
Hi, my current version is MHS2_ER_AU_P0470, and all my activation keys are illegal. If I update my firmware, will that solve my problem?
Witam. Przepraszam że nie na temat ale szukałem już wszędzie i nic. Audi A6 2016 po dotknięciu manetki kierunkowskazów są 3 mrugnięcia. Czy da się zmienić na 5 mrugnięć w OBD11? Dziękuję i Pozdrawiam
Powinno się dać.
@@mrfixpl a jest szansa że mi jakość podpowiesz? 😁
@@sektorp ten poradnik nic nie da. Audi A6 i Seat Arona to dwa zupełnie inne pojazdy, które mają ustawienia w zupełnie innych miejscach.
W Audi A6 4G jeszcze szukam.
w aplikacjach jest komfortowy kierunkowskaz i tam można ustawić od 1-5.tak zrobiłem w swoim Audi Q5 2018.
@mr-fix do ypu know where I can obtain a copy of the MHI2_ER_AU37X_P5153 firmware? MIB site does not have it . Thanks so much
Hello! i'm tryin to update MHI2 ER_AUG22_S2148 to MHI2_ER_AUG22_K2156 and having Train is blocked error. What can i do with it?
Train is blocked. Kolego tu chodzi o kolejność. Jeśli masz MHI2 ER_AUG22_S2148 to czekają cie dwie pośrednie aktualizacje zanim zaintalujesz najnowszą. Najpierw zainstaluj MHI2_ER_AUG22_K2161_MU1421 (A4-A5-Q5-Q7) następnie MHI2_ER_AUG22_P3241_MU0678 (A4-A5-Q5-Q7) a dopiero najnowszą MHI2_ER_AUG22_K3346_MU1438 (A4-A5-Q5-Q7) która ma 2.7 GB
Do you have a guide on how to load other languages into MHI2?
Can you do this when you have audi sound system / subwoofer in back ? No empli disable? So direct upload with sd, ?
Or does audi sound, also with obd / amplifiers disable???
Hi, can you please tell me which component to disable (in installation list) before installing P3663 to A6 C7 with Bose System to avoid the amplifier issue? Thank you!
Hello, great video. After unit update my navigation, sign reading, bluetooth and some other features dont work. Is there a solution fot this problem? Please help, thank you.
Do you know if on the OBDeleven is an option to code rear lights/indicators from US to EU?
Do I have to disable audio amp, what happens if not?
Also this is new software available for my car: MHI2Q_ER_AUG22_P5152 but can’t find it. Currently:P5092
If you update amp, you will have no sound until you upload parameterization with ODIS or VCP.
Check mib-helper.com - it will show you if there's newer firmware available.
my audi A5 2017 has navigation on main display but there is not NAV option on Virtual Cockpit, is it possible to activate that also?
How do I log in to MIB Solution One?
guest
guest
is it possible to update KR version of MMI to ER by just doing what you did?
or should i do something extra to convert the region?
The update works only with SD card or I can use USB stick too? Thanks for answer.
I would recommend using SD card on the SD1 port.
Jak to wygląda z aktualizacjami map np. Audi MMI. Pliki z aktualizacją map wrzucam na nową kartę SD która ma zduplikowany CID oryginalnej karty SD i nowa mapa się nie uruchamia. Stare mapy działają na karcie ze zduplikowanym CID. Przykład z RMC z Navi.
Z tego co wiem, to RMC ma jeszcze jakieś dodatkowe zabezpieczenie oprócz CIDa. Chyba był wgrywany kod aktywacji na dane mapy przez parametryzację.
@@mrfixpl dzięki, spróbuję gdzieś znaleźć jakieś info w sieci.
Hi there, I hope that you could resolve my query! I have an Audi A4 B7 imported from Japan to New Zealand. I need to update firmware of my vehicle from Japanese one to One suitable for NZ, I’m guessing it would be RoW and then GPS maps update from Japan to Nz! Could you please guide to with this?
How do I understand which amplifier I have in my Audi A4 B9 2018
Quite new to all of this but managed to update my MMI software on my audio q7 MHI2_ER_AUG22 then installed M.I.B to get the lifetime map updates and Android auto etc then installed the latest 2024 maps and POI
At the time I didn't realize that there was a newer MMI update than the one I installed, so I tried to install the newer version but get a warning message
Warning: downgrades not selected for download found, obviously I don't want to proceed but just wondering if it is because M.I.B is installed and needs removing first.
Any advice would be much appreciated
Thanks
Great job sir ,so if i want to change the region of the MMI is this the right way ?
I have a question regarding fuel consumption display. I recently bought an Audi A3 2014, it's an Ultra model. The driver display only shows fuel range and reduced display, when I cycle through from steering wheel. Is it only on premium versions of Audi A3's? It really drove me nuts. I read the driver manual and researched all over the internet but to no avail. I appreciate any help you can provide in this regard. Thanks.
On my previous comment I forgot to mention that I receive errors in 5F -- "Right & Left Bass Speaker -- Open Circuit". Any solution? Thanks again...
Is disabling amp necessary? Because i dont have obd11
Would this update enable Navigation system in the vehicle?
Hi, where can I find MHI2_ER_AU276_P5600 for Audi Q2? The latest one on MIB solution is P5088
Might not be public yet. Or might not be release as update - only factory installed.
@@mrfixpl Thank you for your answer, I wil try P5088
What about for HN+R_EU_au_k0770 version (u had video about it how to enter red menu 6 years ago)? when u enter it - it shows its invalid, cant find any updates?
HN+ is a different (older) system. Will try to cover it one day.
@@mrfixpl yes I know, it was in pre facelift models. I guess its quite useless system, just because of its experience I am never getting audi ever in my life. It looks like 2005 or 2009 tech.
If Worked for A3 8v 2014. !
Hi, it seems that mibsolution website does not have any files only folders and they all are empty... In some comment i saw that server migration was happening about week ago, maybe it is still in process?
Czy da się wgrać wersję ER na US? I drugie pytanie, gdzie na stronie mibsolution są aktualizacje dla przedlifta (MHIG)? Widzę tylko wersję mib2 i 3
Hi, Many thanks for the tutorial. Will this procedure add the activation key #023000EE if it is initially missing?
My version is Pxxxxx in the end. Is there a compatibility problem if the most recent version is Kxxxxx in the end? Do I have to choose a version with the letter P?
Hi! I have A6 (2016) with the K3663_1 updated with your help. Thanks a lot for that. The mib-helper says I can update it to P3663. Is that true? I dont want to make it wrong
Zaktualizowałem wersje MHIG_EU_AU_K0337 do MHIG_EU_AU_K1555 w A3 8V 2013. Wszystko sie powiodło, czas 38 minut, świetny poradnik. Niestety u mnie bez żadnych zmian, brak nowych funkcji ani szaty graficznej. Karta SD SanDisk 32GB V30.
hi, my b&o was accidently included the update firmware MHI2_US_AU57X_K3341 and now sound quality andd volume is very low, what do I need to do to get this issue fix? appreciate any help.
Why do we need to update the firmware? Please can you let me know the benefits. Does your mirrors fold by the way? I can’t figure out if my car doesn’t come with the feature or the firmware needs updating
As long as the car has folding mirrors installed, they fold. Usually there's an option in the menu settings to activate or deactivate that function
Hello, is it possible to "reinstall" same version of Firmware? After trying to do mod with MIB with EE licence, I've got info that some file is not correct and I need to reinstall firmware (in the past, audi interface was added and probably there is not recognized patch in FW). During instllation of the same FW, I've got info that everything is "up to date" and "start installation" button is not available. Anyone?
Hey I get to the list of apps but my start update button is greyed out
Hi. You say 5089 is the latest, but MIB helper says a higher version. Why not use the 51xx option?
Thank you for this tutorial. I successfully updated my 2014 S3 (MHIG) from P1048 to K1555. It all went well, disabled MOST, etc. Only issue I'm having is that my reverse camera has stopped working! I still get an image from the camera but it's distorted and glitchy. Anyone heard of this happening before? The camera worked perfectly before the update.
@@stevel1973 Did you ever get it sorted out? I also have a 2014 S3 running P1048
hi. this was a great video like all your videos. Can you recommend something to convert MMI from Korean to European, including Maps, Radio frequency etc? thanks
Hello, I have the 2017 S3, but American version. I have the firmware version P5107, so I see that they have a new on a on mibsolution, but the version have a different letter (K5512_1). is the latest one for me or I only can update to P versions?
Greetings friend, excellent video, do you know if there is a patch for SD to eliminate component protection for mst2 US vw pq p039t the radio 5K7035200F???
Hi there, many thanks for all the videos they are ALL very useful.
I bought a new to me Audi A3 8v which has very old maps installed, I decided to update the maps, but in order to be able to update these, I first had to install the hack to get the lifetime activation key for maps, but I did not know if it “safe” to do this with the old firmware installed in the MMI of my car (P4159).
As I don’t have or plan to buy the OBD Eleven, I tried to remove MOST from amplifier using VCDS but when entering the Long Code Helper my VCDS cannot read the bytes correctly so I don’t get any “help” to know what each tick is. With all that in mind I decided to remove MOST fiber cables from the main unit and run the update. It started well but in the second module it stopped and said something like “MOST is unstable” do you want to proceed with installation or cancel, at that moment I shat my pants and hit cancel. The installation updated the first module (with me still all shat still) and rebooted to tell me the first module was “OK” and from there on “NOK” just like that. I managed to get out of the installation but now I get an error though VCDS saying that some components are not updated (1 Fault found 1555-Check Software Version Management)
My question is, is it safe to run the update with that “MOST unstable” notice? Is that notice because the fiber optics have been removed from the main unit if you know?
Many thanks in advance for the help and sorry for the long comment…
I finally bought an OBDeleven and followed Mr.Fix instructions to update the MMI without any other problem and also update the maps and pdis
Hello! I have MST2_EU_AU_P0962D, will I benefit to having some extra features if upgrading to MST2_EU_AU_P0965D? It seems to me that there would be almost no difference
Witam, mam problem zainstalowałem sobie nową wersje systemu ale nie działa mi głos w aucie a przed aktualizacja nie wyłączyłem tego audio amp i po aktualizacji nie włączyłem ponieważ nie posiadam OBDeleven, czy jak kupie i podłącze i zrobie tak jak na poradniku to wróci mi dźwięk? już nie wiem co robić i jak to naprawić prosze pomóż mi jakoś (mam też problem z mapami bo sie nie pokazuja wyskakuje blad podczas ich ladowania) bardzo mi zalezy na naprawieniu dzwieku, prosze o pomoc jakąś
I have a 2018 A3. Is this MMI update worth it?
Mr Fix It - maybe you can post a follow up video showing the MIB2 interface? I haven’t seen anything on UA-cam
Please help me:
I have MHI2_ER_AUG22_S2116. I want to update my maps:
Do i need to do it in this order?:
1) firmware update (which one to use? there are 6 of them?
2) install M.I.B along the "patches" and apply patching
3) copy & paste maps (~26 GB) to sd card and start with the update of maps?
p.s. i don't have "key #023000EE" in red menu.
Thanks!!!!
I have MSTD and there is no opsion there for this. Any help please
I want "MHI2 KR AU57X P0901". I couldn't find it in MIB Solution. Is it something I can't find? Or is there no corresponding version?
Hey there, i have a question, i cant find the data for MHI2Q_ER_AUG22_P5152 on the MIB Helper Website, can some one help me ?
Will upgrading firmware version automatically enable carplay / android auto or are other steps required?
If you use modified AIO version - yes.
Stock update - no.
Hey, thanks for the video, everything well explained!
I don't have OBDeleven or VCDS, so I cannot uncheck MOST so I doesn't update my B&O sound system. Is it possible to deselect the amplifier update through the red menu or remove the AMP and Bose folders from the SD card so there is no update files for the amplifier?
Hello, do u know where is the MOST that we have to uncheck with vcds ? i have both
I currently have MNS2_US_AU_P2037, can I install other updates, my navigation is missing․?
Why unable the amp audio ? Is it mandatory to update a firmware?
It says "Database error: SQLSTATE[08004] [1040] Too many connections" . Couldnt reach the website to download the file