I just installed mine and the DRL on the driver's side doesn't light but everything else still does including the DRL on the passengers side. I haven't replaced the fuse yet but I'm going to have to replace one of my lights now?
To be honest I still haven’t figured it out. I was able to source other led drls and they didn’t work either. I have to grab my volt meter and see where I’m having the issue. 😕
So I got the stock parts.. both blinkers should stay on when you turn on headlights.. one of my blinkers dont stay on but the bulb blinks when blinked i checked all the fuses replaced the bulb.. any idea? Help me please this is annoying anyone.
I think there’s a specific kit to attach a line from the battery. You may be a little short on power if the fuses are still intact, you’ll have to tap into the battery somehow. I saw a kit a while back, if I find it again I’ll post the link here. I too am still dealing with this.
Are you change the fuse?
Sorry but I can connect the halo bar at the alogen fog light? You down have the led stripe and no problem, but i have the alogen fog light.
Are they work if you tag the signal with the headlight?
I installed mine, all is working although the drl bar is very dim. Don’t know what it is.
I just installed mine and the DRL on the driver's side doesn't light but everything else still does including the DRL on the passengers side. I haven't replaced the fuse yet but I'm going to have to replace one of my lights now?
To be honest I still haven’t figured it out. I was able to source other led drls and they didn’t work either. I have to grab my volt meter and see where I’m having the issue. 😕
what did you do with the ballast?
What did you replace the fuse with to keep it from blowing?
So I got the stock parts.. both blinkers should stay on when you turn on headlights.. one of my blinkers dont stay on but the bulb blinks when blinked i checked all the fuses replaced the bulb.. any idea? Help me please this is annoying anyone.
Would the fuse u checked under the wheel be ideal for my situation? Both lights blink but one doesn’t stay on
I think there’s a specific kit to attach a line from the battery. You may be a little short on power if the fuses are still intact, you’ll have to tap into the battery somehow. I saw a kit a while back, if I find it again I’ll post the link here. I too am still dealing with this.
sometimes on leds you can only plug them in one way. Try flipping you led plugin to the turnsignal bulbs 180 degrees.
My DRL's work but the turn signal part does not. Any idea why?
Tyler Steeze check your tapping points. It’s better to just solder them on. You much not have a solid connection. 🙌🏽 hope that helps!!!
@@TommyMccoyMedia Mine is supposed to be plug and play? It connects to the factory harness but no power to it.
Disconnect and Reconnect them. It maybe that it’s not making contact.
Tail light fuse is blown btw
Hayder_jz not blown. The led strips have their own in line fuse. I went through all the fuses with a meter, they are not blown.
I like and comment and do more videos can I get a shoutout