How to replace transmission dipstick tube on 2008 chevy colorado

Поділитися
Вставка
  • Опубліковано 25 лип 2024
  • check me out at
    / dirtigaragemods
    / dirtigaragemods
    www.tiktok.com/dirtigaragemods
    GM PART NUMBER
    GM 15281541
    Link to order online
    www.gmpartsgiant.com/parts/gm...
    Amazon link
    amzn.to/3y5EhjN
  • Авто та транспорт

КОМЕНТАРІ • 21

  • @romansanti4557
    @romansanti4557 11 місяців тому +1

    Thanks for the video!
    Keep on cheving!
    Cheers

    • @DIRTIGARAGEMODS
      @DIRTIGARAGEMODS  11 місяців тому

      Thank you for watching feel free to subscribe,

  • @dtown7243
    @dtown7243 11 місяців тому +1

    Hello. Would you recommend replacing the tube seal as well? Would we replace at the transmission or add it to the end of the dipstick? Thank you for the video.

    • @DIRTIGARAGEMODS
      @DIRTIGARAGEMODS  11 місяців тому

      I wouldn't replace the seal if it doesn't need it, my seal was completely fine I just slid the new tube in and called it good thanks for watching appreciate your viewership and your comment

    • @dtown7243
      @dtown7243 11 місяців тому +1

      @@DIRTIGARAGEMODS thank you for your help and quick response.

    • @DIRTIGARAGEMODS
      @DIRTIGARAGEMODS  11 місяців тому

      You're welcome I hope my video helps have a good day

  • @dragonan4459
    @dragonan4459 Рік тому +2

    Mine came out and myself and others have been fighting hours trying figure out where even goes back in 😪🤷🏽‍♀️

    • @DIRTIGARAGEMODS
      @DIRTIGARAGEMODS  Рік тому +1

      If you go under the vehicle on the passenger side there's a little flat spot just right before the bell housing and there will be a hole there with a rubber seal that the dipstick tube goes into thanks for watching feel free to subscribe

    • @dragonan4459
      @dragonan4459 Рік тому

      @DIRTIGARAGE MODS is it flat and the tube goes in from the passenger side towards drivers not downward?

    • @DIRTIGARAGEMODS
      @DIRTIGARAGEMODS  Рік тому

      It goes in the flat spot of the the transmission on the passenger side of the engine, what engine do you have in the vehicle

    • @dragonan4459
      @dragonan4459 Рік тому

      @DRTIGARAGE MODS I really think I found the hole...just not exactly sure because it wld go in sideways , 3.7 L auto

    • @DIRTIGARAGEMODS
      @DIRTIGARAGEMODS  Рік тому +1

      Go to Google and type in a 4L60E transmission and you will be able to see exactly where the dipstick goes

  • @genodinero
    @genodinero Рік тому

    this job is waaay harder than this video portrays. he said he was goin under. then he said he went from the top. yes. you will do that and more. and then you might just give up for the night like i did.. 😵

    • @DIRTIGARAGEMODS
      @DIRTIGARAGEMODS  Рік тому

      Took me about 20 minutes to do this job, but if you don't have the patience then I would take a break and come back to it, thank you for watching feel free to subscribe for future Colorado content

    • @genodinero
      @genodinero Рік тому +1

      @@DIRTIGARAGEMODS yeah Bro patience and a break should definitely be on the list. i gave up last nite and this morn i asked my neighbor to have a go. its was like a newbie in Vegas. Jackpot!! thanks for the post and the laughs.. 👍🏾

    • @DIRTIGARAGEMODS
      @DIRTIGARAGEMODS  Рік тому

      Your welcome thanks for watching

    • @desevillacustoms8061
      @desevillacustoms8061 5 місяців тому

      Hi, thanks for the video, I want it to know with engine is yours, is it a 3.7L or 5L?

    • @DIRTIGARAGEMODS
      @DIRTIGARAGEMODS  5 місяців тому

      Inline 5 cylinder 3.7 luzuki engine, that's what they put in all of the 07 and 08