I did a similar thing to mine, FMS 70mm edf units with 3060 1900kv fans, 2 no 80amp reversing escs located in nose wheel bay underside area ( avoids moving edf units backwards) 2 number Rhino 2200mah 50c 6s lipos in tandem one behind the other fits right to nose front. Opened up the gun ports for cooling air into lipos. CG 120mm from LE. Adjusted angle of incidence of horizontal stab which was about 3mm out. Got rid of the ugly rudder and elevator control tubes and did a defence of Berlin colour scheme, All up weight with lipos 3.45kg thrust 5.4kg (static) I basically bought the airframe as spare parts and installed my own servos, retracts and electronics. ua-cam.com/video/u95TNCzcb-4/v-deo.html 8 s not necessary and the escs on mine will not take 8s and I suspect the extra rpm will blow the fans
@@paulrkytek6587 hey thanks for the comment. I’m gonna look into making some of those changes. I’ve been wanting to move my EDFs back into the original locations.
I did a similar thing to mine, FMS 70mm edf units with 3060 1900kv fans, 2 no 80amp reversing escs located in nose wheel bay underside area ( avoids moving edf units backwards) 2 number Rhino 2200mah 50c 6s lipos in tandem one behind the other fits right to nose front. Opened up the gun ports for cooling air into lipos. CG 120mm from LE. Adjusted angle of incidence of horizontal stab which was about 3mm out. Got rid of the ugly rudder and elevator control tubes and did a defence of Berlin colour scheme, All up weight with lipos 3.45kg thrust 5.4kg (static) I basically bought the airframe as spare parts and installed my own servos, retracts and electronics. ua-cam.com/video/u95TNCzcb-4/v-deo.html 8 s not necessary and the escs on mine will not take 8s and I suspect the extra rpm will blow the fans
@@paulrkytek6587 hey thanks for the comment. I’m gonna look into making some of those changes. I’ve been wanting to move my EDFs back into the original locations.