Crushing Dangerous Steel Parts with Hydraulic Press Compilation VOL 2
Вставка
- Опубліковано 28 лип 2023
- est most dangerous and strongest steel item hydraulic press crushing moments in viral compilation video. We crush things with our 150 ton hydraulic press and measure the force using our 150 ton force sensor. In this satisfying compilation video we are crushing things like ball bearings, hammer, axe, pressure bearings, grinder disc, saw blade coins, bolt, nuts and all things dangerous and strong.
Our second channel / @beyondthepress
Our fan shop www.printmotor.com/hydraulicp...
/ officialhpc / hydraulicpresschannel
Do not try this at home!! or at any where else!!
Music Thor's Hammer-Ethan Meixell - Наука та технологія
Hey we are back from summer vacation! I already cheated little bit and took two days this week to explode first some truck tires with 300 bar air compressor and then old broken military truck with anti tank mine :D Because what could be more refreshing than some good explosions? Those videos are coming after some time on Beyond the Press channel but I have some great and truly stupid ideas also waiting for this channel :D
The vacation was nice but it's also really nice get back to work and keep the stupidity going on!
Truly stupid ideas always turn out to make the videos.
Awesome stuff! Thank you and please continue to be safe, those are some pretty scary crushes! 😬😲😻👍
Sweet. I have a Yong Heng compressor for my PCP rifles. I've been dying for you and other creators to do some wild shit with high pressure air.
"great and truly stupid ideas" - that's what we're here for!
@@joshuagibson2520 We used a large scuba compressor and it took 40 minutes to explode the truck tire :D
Cuts Like a hot knife through knife…
Wow😮
I've always found it amazing that the press can survive all these "explosions". One would think that all the shockwaves travelling through it and its components would break something. It would be cool to see super high speed footage of the press's frame right as it rebounds upwards after something explodes. You might even be able to the the shock wave travelling through the steel with a high enough frame rate. You would probably need over a million FPS to actually capture it though.
Some of these are so satisfying but some others almost make me fall of my couch every time 😂
Lol these videos are amazing 😂
I love the watermelons with the safety goggles on 💯 Should do that more often 😁
Amazing to see the failure points of things we take for granted as being super tough.
Especially pausing the slow-mo footage and being able to step through it frame-by-frame using the dot & comma keys.
The saw blade fight was some next level action!
Okay, you got to do the bolt again, but with the Slow Mo Guys.
Not sure we’ve created a camera that can show you that one!! That was shear insanity!!! Might take a ridiculous 50 million frames a sec to see more than a bolt one moment and something wrapped around it the next! They’ve got a pretty bad ass slow cam, it changed nothing!
I love this channel. It's really fun to watch.
Really cool thanks,can't wait 4 the next!
I can never get over the thread just shearing off like a spring
For real!!! It was so dang violent I don’t think there’s a frame count high enough to show it!!!! The slow mo was exactly the same as real time! HAHAHAHAHA!!!!! That must have been amazingly loud!!!!
I bet that sucker was HOT!!!!!!
Great Video Thanks!
Good to see you two are still going at it.
I’d love to see the Strongest Axe head you’ve found vs different types of metal cube 🤙🏻
Those ball bearings were terrifying, but the coins and nails were mesmerizing!
Absolutely brilliant 😂😂
Just love this channel 👍
Master of destruction !
Brilliant content.
That exothermic reaction from the potential energy stored upon compression is impressive!
That’s a whole lot of words! Forming that thought seems like it may have hurt. Reading it a couple times made me tired! 😂
Oh sure, one movie about Oppenheimer comes out and suddenly everyone's a physicist!
“Exothermic reaction” is usually in reference to some kind of chemical reaction, specifically one that releases energy. What’s happening here is the kinetic energy from the press, as it squeezed the various materials, caused friction, rapidly heating and expanding the materials, causing them to explode. If you have ever bent anything metallic (silverware or even longer pieces like rebar) you’ll notice that if you touch the point where it bent, it’ll be noticeable hotter.
Best yet😂
Super cooled ball bearing was my fav.❤ luv your channel, my friend😎
Good Job My Friend! Greetings from Poland😊
Thanks for the video.
I wish you'd shown the axes and the knives after the test to see the damage.
Thanks for sharing
Can you put a short, large diameter clear polycarbonate tube around a ball bearing explosion one time? To see all the particles bounce around inside the tube at ridiculous speeds.
Yes!
Great👍
When I'm tired after work, I immediately watch this video... and the fatigue immediately disappears
This was a very explosive video!!!
Those were ingenious ideas!!!!
Lauri, what would you say is the most dangerous thing you’ve ever done on this channel?
That's good question! First I have to say that the most dangerous stuff happens on Beyond the press channel :D But from this channel I have to say that maybe the pressure bearing from or larger ball bearings from this video. Maximum force and hardened steel exploding generates the most dangerous shrapnel.
@@HydraulicPressChannel I kind of figured as much. Exploding bearings are WILD with how much shrapnel and energy they release.
You guys should seriously consider collabing with slo mo guys
Thanks for this very good video ❤❤❤ and can you do a big video with wet pampers diapers and wet Drynites diapers destroying with hydraulic press thanks please
We do that now when got back from vacation :D Sorry that it's taken so long. This is truly great idea :D
@@HydraulicPressChannel oh thank you so much please i waiting for this video thanks again 😃😃😃😃😃😃😃👍🏻👍🏻👍🏻👍🏻
What a fun idea!
@@HydraulicPressChannel I have a prediction: the water will start to steam out from the diapers, causing them to dry out and then we'll get the normal paper explosion.
@@swistedfilms or better diaper explosion 👍🏻👍🏻👍🏻
Great stuff!! My only wish is that we could see what the knife blades looked like after each cross cut. It looks like they both start cutting each other and then one just gets a bit off perpendicular and flexes.
I would watch a whole video of various coin ones!
7:46 an impressive feat from both grinders 💪🏻
How about a discussion and demo regarding hydraulic injection safety?
"OK!"
Wow
You should try crushing unstable uranium next....
Can you slice a ball bearing in half with an axe blade? I'm thinking of a fixture that's just a simple cylinder with a slot cut down it and a hole drilled in the middle.
Oh great, a video full of videos we've all already watched.
These lure in a lot of new viewers for the channel and let's us take summer vacation and still keep publishing something. We have new fresh stuff again next week now when we are back.
@@HydraulicPressChannel NO VACATIONS ALLOWED!
We need new content!!😡🤪
I noticed in the axe V axe and knife V knife demonstration that the implement from above was the one to fail both times. It makes me wonder if there's bias in the test or if it's just random chance.
Lauri, if you mount your up-close camera on an arm attached to the vertical frame of the press, it will stay in place rather than 'trampoline' away when the crushed item fails.
Do you use bulletproof glass? It seems very necessary for this.
Slomo videos are so nice :)
R.I.P.
HEADPHONE USERS!
Grrat video 😅 but can you please next time show clearly the damage to the objects. (Knife, ax and disk etc)
Those explosive parts made me anxious! Hope you stay safe!
Also, all the time the cameras or the lightings fell (that comlete darkness after the explosion part? Spooky!)... I wonder how many times you had to buy new ones...
You guys have a great channel, but honestly, im really worried about you hurting yourself bad making these videos. Take care brother.
duplicate clips? vol 1 had the nut and screw
5:35 what a beautiful image
Better than all ASMR videos !!
Kinda want a test of ball bearings made of different materials, but that might not even be possible.
aw stop stopping so early
Two of my favorites were wood sawblades on grinders and 300 nails into plywood. wood. 👍
Nails were super nice!
The most dangerous couple in Finland.
Please try Robert Glass
It cuts like a warm butter cuts through knife! 😅✌️
How could you do something that dangerous
I wonder how tough is HSS M2 steel.
It's supposed to be better than traditional HSS.
0:02 From just listening to the audio, it sounds like a woman getting shot.
movie main charater weapon:
Tungsten carbide is extremely hard but quite brittle.
Sorry for that, There has been somekind of mistake when exporting the video
Scissoring but for axes
Uhhhhh, can anyone tell me what the hell is a “pre-fragmented hammer” is???!?!? Exactly what are we hammering with it!!!
I thought the press was pretty good at fragmenting just about everything, did we find a hammer that beat the press??? I’m a bit confused here…..😂
Nice! 👍🏻🇺🇲
The screw and the nut, at 0.50s, they couldn't be Chinese 🤣. I heard the Chinese buy screws from Germany for their bridges and railroads.
RIP camera ????- 2023
My knife so sharp it can cut through a knife
Hit that like button
🤩🤩🔥🔥💯💯
Cuts like a knife through knife
😢😢😢😢 what's is this 😂😂🎉🎉🎉🎉
WOW
Knife against knife took so little force!
I mean you could try that by hand at home!
(*Not that anyone would try. Right?😅😁😁)
Esitelkää joskus sitä pajaanne.
Lauri, you're a real ball-breaker.
Почему пресс так быстро давит? Отрегулируй нормально.
first 4 seconds, sound doesnt match the video 🤪🤪🤪🤪
Pls try a loaded gun to crush
Q: Curious comparatively, how many kgs were pushing on the Titan when it imploded?
From what I found, it's 1 atmosphere for every 10 meters (33 feet) under the surface. So, at 14.7 PSI at sea level, and the Titan was ~3800 meters down, that's 14.7 * 380, or 5586 PSI (2539 KgSI) .
Videos to make you squint
slow-mo wife whalesong
Pls demonstrate oceangate sub. Implosion with hydrolic water chamber👍️👍️if possible try exact depth
Oh look they're kissing ❤
👨🦽👨🦽👨🦽
Sounds like an explosion from Looney Tunes 0:56
Wow! Saw blades against each other???? You guys are gonna die some day!!!!! I can promise you WILL end up finding an “experiment” that is gonna be WAAAAAYYYYY more violent than any blast shield you’ve got!!!!! Don’t get me wrong, I love watching, but I think you might consider the numbers as a safety warning! 7 million subscribers are as curious as you about these things but we are not crazy enough to actually do it!!!! This is why we watch YOU do it!!! HAHAHAHAHA!!!!!!
It’s actually not funny, lots of this has never been done before because it’s just plain dangerous!!!! What do we have to gain by knowing what happens when two saw blades hit each other?!? Pretty sure it won’t happen in any way!!! Well…. that is until you guys get bored I guess!
Don’t risk your lives to try and entertain all of us!!!! I love watching stuff gets smashed but not so much I want you to die so I can see the stuff!! Damn!
This is a tricky one huh?
Who had the idea for the saw blades? You or someone else? Sorry if I’m hung up on that one, I use saw blades every day and have almost 30 years, not once have I wondered about that situation!!!!! You are so much more brave than I that’s for sure!!!!
why dont you show any of the results or which object won
thats very unsatisfying :(
The ending was rather rough....you cut of in midsentence. Had a good one going but the ending was lame....
Imma1st
Please change that girl who screams
I'd be lying if I said I didn't miss Anni. Hopefully Hannah grows on us over time.
Dibbs!
?