Pt 3. BMW Replacing Valve Stem Seals N46 Engine 20i Inside the engine
Вставка
- Опубліковано 29 вер 2024
- Pt 3. BMW Replacing Valve Stem Seals N46 Engine 20i Inside the engine
Affiliate links for USA Amazon:
Non genuine Valve stem seals: amzn.to/37NZKwq
Valve Stem Seal Tool Kit For BMW N62(Different): amzn.to/2Ni6HMV
Valve stem seal pliers: amzn.to/37Ln4uY
Rocker Cover Gasket: amzn.to/2AMLmIO
Rocker Cover Gasket & Accentric shaft motor: amzn.to/2OcDPX1
The Magnatec Oil I used and like. Not all Oils can be used in Diesel as well as Gas/Petrol cars. This can: amzn.to/2AY8uBp
This oil also is great with newer BMW's with stop start technology as it clings to parts longer.
Torx Screw driver set: amzn.to/31vNQTQ
Torx Sockets: amzn.to/31rXtmh **Great for every BMW owner**.
Stanley Basic Tool Kit 65 piece amzn.to/2SmxN6a
Stanley Basic Tool Kit 210 piece amzn.to/2QAukUf
Thanks for watching this Mark's reviews and Tutorials video. Mark is not a trained mechanic. Just a car guy that loves to drive and work on cars. What I do here may not work on your car and I am not intending to give professional advice for you to work on your car. But if you do know a bit about cars then hopefully watching these videos will help you to sort out what is going on with your car. Mark is not liable or responsible for any damage you do or things that happen to your car or yourself.
Cars are complex and dangerous things and not only can you be hurt working on them but you can also do serious and expensive damage to your car.
Cars should be worked on by qualified people, don't over reach.
Talk to a qualified mechanic if you are in any doubt. - Авто та транспорт
Successfully replaced my seals thanks to your video. It was very informational! I also dropped my valve stem because I couldn't keep pressure. I've learnt to make a tool to fish the valve out and it only takes a minute to do that.
did this on my old n46 but i used the rope method with the engine in car no air and only basic tools but i think its worth getting the head off then you can actually check the valve guides and replace if nessasary
I have to do this job and want to use the rope method - do you simply take out a spark plug and just ram the cavity with rope?
How much rope and do you have to do it with all spark holes?
Thanks buddy
@@KingAlex9two yeah just get a line of rope off ebay small enough to fit in the in the spark plug hole what I used to do was bring the piston up half way fill with rope then try and keep it turning to tdc when you feel resistance your done and all the valves shouldn't drop just be careful with the oil gallery's fill them with tissue and carefully of the collets they like to get lost
@@HarleyN93 I'm gonna give it a shot when the timing tools arrive. Hopefully I don't loose any valves!
Thanks a bunch
Olá ! A cabeça que falas são os comandos ?
Quero fazer isso na minha 120i 2009 , onde conseguiu as ferramentas necessárias e quais usou ?
Seeing the first video, I believe it was your rings instead of valve stems. Let me know if replacing just the valve stem seals fixed it. Thank you
Yes Valve Stem seals sorted this. Car was perfect after this and still is.
Thank you 🙏
Mais um inscrito , espero que me responda rs, onde consigo essa ferramenta para empurrar a mola da válvula ?
hi there just out of curiosity how much psi air pressure do you use
Hi i have an 07 bmw 335i i have replacement my tubos 2 times and now my car need the valve steam seal replacement me canic recomend me to change engine i need help plase i m in tx
Sounds like you need to get a second opinion and quote from some other mechanic.
@@Marksreviewsandtutorials i whent to see some mecanic s but thay tell me tha butter if i replace the hole engine , now im saving money toget the stem seal and tools i m going my self thers some videos on internet the will help me wiht that