Correction: The software editor that comes up towards the end of the video is Ed Dixon's and not the one from the Mountain Utilities website. Check the description for related links. Here's the link to FCB1010 Manager (FCB1010 software editor): ua-cam.com/video/MMJQ-AHRSMs/v-deo.html
@@InTheMixReviews That is so lame! Well, I can say, without a doubt, that we all appreciate your attention to detail to make this awesome video for us!!👍🙏
I've had The FCB for over a year now, just sitting on the floor collecting dust and dirt.. THANK YOU! Now I can finally use it, it became from my worst enemy to my dearest friend within this 46 minute video tutorial. So many options my mind is blown. I didn't even know what to do with it,, but now I am completely overwhelmed by the sheer number of possibilities this device can be used for. So I will say it again, THANK YOU!
Thanks a lot. I'm glad this video helped you get back on track. This pedal is one of the hardest midi devices I've ever worked with. It's not user friendly at all...until you understand its structure and all that. Once you do, it's a wonderful pedal!
I just got mines today. I've seen people talk about how complicated it was to use and realized today why. They ship these with literally no user manual and expect us to just know how to use it right out of the box. Thanks for helping us understand how this device works!
One of the best instructional videos I’ve ever seen! The graphics with the arrows and the inserts clearly direct attention where needed and show what’s happening. Clear, concise, and thorough. Brilliant job! My FCB1010 should arrive in a couple of days, and now I’m looking forward to diving in instead of dreading it. Thank you for this!
I've got one of these arriving in the next 24 hours with no experience of programming it I thought I'd try YT and see if anything would help - this video was excellent 10/10 - it explained all the steps clearly and the examples were shown at a perfect speed and with relevant content . Many thanks.
This is hands down the greatest youtube tutorial I have ever watched. Thank you so much. Thanks to you I now have the knowledge and power to switch from vegetarian industrial death metal to porn groove deep house with the push of a button. Now I just need to find a Midi compatible toaster and I'll be set for life. Definitely subscribing!
THANKS SO MUCH for including the info on programming and calibration of the expression pedals. I just received a brand new FCB1010, and was trying to set it up to use with my iPad. When trying to route the expression pedals to control an app, it showed the pedal going from 0 to 127 almost immediately, barely moving the pedal. I tried all kinds of stuff, but no change. Then I remembered the calibration procedure you described, and tried it… bingo! Works just right now. BOTH exp pedals were in this state, and the calibration fixed both of them. Once again, Extremely grateful that you included this info; not sure anyone at Sweetwater would have known… and absolutely disgusted with Behringer that they actually ship the FCB1010 in this condition…
Sweetwater products links are your best buddy! Sweetwater takes the time to do tutorial videos often, as they have done with this product! Check the product page to see their instructions.
So thankful for this tutorial. I greatly appreciate the time you took out of your life and schedule to make this video. Know that you have really helped someone and saved them a lot of frustration! Thanks again!
This is exactly what I have been looking for. I do solo performances on keyboards and on many occasions I need both hands free and instead, I'm hoping to be able to change the chords of the styles with my foot. I have to try this. thanks a lot for this great tutorial.
Thank you super much! I have watched many other videos about using the FCB1010 and also read the manual, but only this video explained some critical details, which both the manual and other videos left out. Now finally it all makes sense!
definitely a video to add to the saved list :-) finally figured it out. I don't know who designs these things, they didnt have keyboard players in mind when they did. Not being able to change midi channels on the fly is a real pain.
On minute 8:32 on the video, you said that there is absolute no difference between the switches, implying that, for instance, switch 1 to 5 could also be used to send CC messages. How do I change the midi function of the switch? In my case, I need to send CC98, CC99, CC06 and CC38 to my Pa5X, but I found nothing showing how to do that with this pedal. Can a switch really be configured to send CC instead of PC?
This was extremely helpful tutorial thank you so so much. My friend and I would have been lost in the weeds trying to figure this out on our own. He bought one of these for 80$ at pawn shop
In The Mix more than helpful, a life saver. I would not have been able to figure it all out. You did an excellent job of being very clear and concise with your directions. Like someone else said Behringer should have paid you for this because you did such a good job
This is very clear but I am new to controllers, midi, cc, pc, etc. I wish there were a video for beginners. If I understood what was being taught here, this video would be very helpful.
Magnificent tutorial.. I set this pedal aside after reading the manual because the manual sucked and couldn't tell me what I needed to do! You made it simple. (I am not a novice with midi either this is just a confusing manual.) Thank you ever so much!!!
I totally agree with you. That’s the most discouraging manual I’ve ever seen. It only makes sense for those who already understand the basics of this pedal which kind of defeats the purpose. Glad you found the video helpful. Thanks a lot!
I love this video purely for making me realise that it's possible to mod the horrible firmware that this otherwise very powerful piece of hardware ships with!
Well, that was spectacular! I had no idea how powerful this thing was. Fantastic video presentation of it all ... except what's in the next video hahaha! Thanks for your work! Behringer should pay you!
Thank you PinkPonyOfPrey. Yes this is a great pedal indeed! You said " except what's in the next video"? What's in the next video that you didn't like? ...I know! Behringer didn't bother to make a video. I guess I should've got paid for this. ha ha ha
I just haven't watched the next video, so I can't know what's in it yet, but I assume that unless you ran into something hard after the first one the next video is as good as this one hehe! :D
lol! I actually did run into a few obstacles but I was able to get in touch with Mark who's the genius behind FCB1010 software editor and he answered all of my questions. It's a very nice editor for sure.
Honestly you have all the instructions you need in this video. You just have to look up the manual for your target device, and see what midi parameters are assigned to that particular feature. Then, you program the FCB1010 with those values. You can also try the Facebook group. Many different users who use all kinds of gears in there.
@@InTheMixReviews Thank you for the response, I have followed your instruction. I can use all of the Korg commands: variations, fills, stop, etc..on my PA700 Choosing a Voice/Guitar Preset for my electric guitar plugged in the guitar/mic input. Trying to access the patches by default, the book states: Voice/Guitar Presets can be selected by sending a series of messages on the MIDI channel assigned to the Guitar Processor. ▪ Control Change #00 (Bank Select MSB) message with value ‘0’. (CNT1) ▪ Control Change #32 (Bank Select LSB) message to choose the type of preset. (CNT2) and add the preset CC32 Value (one of the three : Factory: 0, User : 1, Local 2) Using the voice/guitar effects ▪ Program Change message to choose the preset. Preset PC Number (PC5) Preset 1…64 0…63 If your controlling device can only send Program Change messages, manually select the type of preset (Factory, User, Local). Works, but it also it changes the style on the keyboard. The coding is very similar for styles. FCB1010 works great after looking at the video and follow the instructions. Any help would be very much appreciated. Thanks
is it possible to have multiple keys turned on at the same time ? like for example let' say you have a clean guitar sound on key 1 , a distortion guitar on key 2 ..but you want to toggle on and off a delay assigned on key 6 .. i can do this but when i hit the key 6 to activate or desactivate the delay ..it turns off the red light of the key 2 i still have the distortion but visually it's confusing ...i would simply like to stay on key 2 and turning on/off the key 6 ..if that makes sense :)
Thank you. Great content! So much information, need to watch it many times! A little more space dead space between all of the points that you make would allow the listener time to (at least me!) to understand and retain all the gems! Thanks again. Best Steve
Thanks a lot. I figured if you guys want to go over something, you can just pause and repeat a section. If I put in dead space, it would've made the video a lot longer than already is.
First and foremost, thank you thank you thank you. You are a wealth of sought after information. I have a question regarding preset configurations and whether you can upload along with program and control changes and sysex data?
A useful video thank-you. 🙏 The biggest limitation of the fcb1010 is that MIDI channel selection is only global, so it cannot be used to send control multiple devices. So disappointing. 😢
Studied this while waiting for my new FCB1010 to control my new KETRON SD2 . When I got the pedal, just for grins went ahead and plugged it in without programing( CASIO PG-308 Synth guitar > FCB1010> KETRON SD2 sound module) was pleased that out of the box it controlled the first 100 sounds of the KETRON! The FCB1010 bank 00 and footswhitch 1 matched KETRON 1 Grand Piano..etc; bank 01 footswhitch 1 = ketron 11...etc. So cool, QUESTION IS: WHAT ABOUT THE OTHER SOUNDS ON THE MODULE? The match out of the box was to what KETRON calls "VOICE BANK A (control change 00, Value=0)" and that has 128 sounds, so as described above I can call up the first 100. This module has 3 voice banks with 128 sounds each plus a "Preset Bank" of 128 plus "Live Drum sets" x 82! Thank you so much for this, had a Behringer FCB1010 a few years ago and sold it in desperation!
I hear you! For a lot of people the FCB1010 end it up in the closet! I don't see why you shouldn't be able to call those patches located in additional banks. Most controllers default to the first bank which is why you don't have to do additional programming. Did you look through the manual to see if these extra bank have anything assigned to them? You probably need 3 entries for those presets : CC00/CC32/PC
Thanks for the reply, am a super old and a nube at this, Well, the default bank I mentioned says : VOICE BANK A (control change 00, Value=0)". The next one says Voice Bank B(control change 00, Value= 1). Next Voice Bank C( Control Change 00, Value = 10 ) Next one ( Control Change 00, Value = 2 )..etc. Ok so need to watch your viedo again figure out how to change that VALUE #...
You are amazing! This is a fantastic video and really shows off the power of the FCB1010. I just bought one after watching your video. Thank you so much for putting this together, I really enjoyed watching this and will surely keep coming back as I start to program my new FCB1010.
Wow. This is a really really good, well prepared video. You are awsome for doing this. Detailed accurate and well thought out. You have a bright future.
Thank you for this excellent tutorial. Do you know if it’s possible to cause the lights on the FCB1010’s switches to correpsond with the on/off states of VST effects pedals? In other words, to use the foot switches as toggles and have the LEDs reflect that?
Thanks a lot. That I’m not sure about. It’s been a while since I’ve used the pedal. Try the Facebook group. Maybe one of the 3rd party chips does that.
First. Thanks for the video. High quality and clear. I have a question. I use keyboards of the type: Yamaha S X900 Do you know if it is possible to set the fcb 1010 to be in the role of multi pad or reset tap tempo and more? I would love for you to answer me. thank you very much.
Very nice and comprehensive video. Wondering if you know of how SysEx commands could be sent directly to devices using the Mountain Utilities FCB1010. There are specific functions that my gear only receives SysEx commands for, not PC or CC commands. Thanks for the video.
Thanks! I could be wrong, but I don't think you could do that. I mean the program does send and receive SysEx, but that pretty much includes PC and CC settings.
I would really love for you to do a video with just Mini controlling guitar amps that have Built-in effects as well as being Daisy chained to TC electronic's G force.
As far as the connection goes, the principles are the same. The only thing different would be the actual Program Change messages and Controller numbers that are specific to each individual device. As far as using an editor, I'm recording a follow up video for the Mountain Utility Editor by Ed Dixon at the moment. Will eventually do device specific videos as well.
Awesome Video, Thank You. I am programming the footswitch to control Note on messages for a light controller, the switches are acting as momentaries....how to you program so it latches?
Not sure if you mention since I only skipped around, but there is third-party software called iFCB that let's one edit the FCB1010 on a computer via USB. Pretty handy stuff! Also thanks for a great tutorial!
Yes, there are multiple editors available. There is no USB connection on the FCB1010 so you would need to use a 5pin to usb interface such as M-Audio UNO. I also have a full tutorial for FCB1010 Manager which is a free editor.
i was going to buy this controller for my digitech rack effect (i am justy getting into MIDI and rack stuff) i have also a mesa studio pre that needs a footswitch to change channels. do buttons 6 to 10 dont allow program changes? and can i set the switch to momentary latchins ( so if i touch one preset it just changes channel on the amp?)
Like it was mentioned in this video, all 10 pedals CAN be programmed the same way. Anything switch 1 can do, switch 10 can do as well. I know there's a 3rd party chip 'UNO' that adds a lot more interesting functionalities like what you're looking for. There are a lot of guitarists in the FCB1010 Facebook group. You might want to post your question there as well.
I have had one for years. Never used it. Now I want to use it with an FX2000 3D. I simply want to assign each button to toggle on and off a single effect on the FX2000 I am watching your video right now to figure out how to do this.
Congrats & Thank You for such a comprehensive and detailed tutorial !!! I was wondering if there is a way to set a pedal for an "octave down" change. I believe this would require 12 "semitone down" messages stream programmed into one pedal. Another interesting challenge could be sending 12 "semitone up" messages to return to original octave when the pedal is released. I'm afraid these will not be possible.
Thanks, glad you found the video useful. If 'Octave up/down' change feature has an actual program change or some type of CC# assigned to it (on your device), then it's only a matter of programming the FCB1010 to transmit that data. The FCB1010 never knows what it is you're actually controlling. As long as that or any other particular feature CAN be remotely controlled with a program change or CC#, you'll be able to make that happen. Now the 2nd part of your question is interesting. It's been a long time since I've used this pedal, so can't give you the answer for certain, but if I remember correctly, the UNO chip (3rd party) has interesting capabilities that do things like that. I recommend that you check out the Facebook group, and post this question on there. There are many users that use this pedal for a wide range of devices. You may get better suggestions, especially if you give more details about the midi device you're trying to control...etc.
@@InTheMixReviews so many thanks for your fast and crystal clear detailed reply, truly appreciated. Just as a minor contribution, I thought of a more generic than specific interest. Quite a few midi implementations seems to handle octave up/down compared to semitone transpose support. So, the idea would be to check the chances of sending a stream of -/+12 semitones down/up to make an octave shift. Would it be possible to store a stream of CCs (rather than a single one) in one pedal? In anyway, thank you again for being so kind and bring extra reinforcement to all these details for us. I enjoyed your warm reply and will follow your advise to check with user groups. Cheers!!!
@@dakoiaa A stream of CCs? I don't think that's a possibility. I see why you would need a number of them to make the Octave shift possible (if there's no single midi commend available for this feature), but what would be an example for such a stream? Would that be a string of the same CC#?
@@InTheMixReviews Hi, thanks for this wonderful interaction 😃 ! Yes, it would be a string of the same CC#. The example I thought of is a stream of 12 semitone-shifts to comprise an octave, since most synths' midi do not offer a single CC# for that. I'm about to buy a 1010 and I realize you think that's not possible with it. That's what I was afraid of.
I have the Behringer FCB1010. I bought this to change drum kit sounds on my Alesis Strike Pro SE set. The Alesis manual says cc 118 and 119 go forward and back through the kits. I need midi channel 2 with the 2 numbers on 2 different pedals so I can change sets during my drum solo. How is this done?
Hi I managed send NPRNs by sending MSB and LSB through CNT 1 & CNT 2 (pads 6,7) together with sending program change (pad 5) with the desired value. Can the value be sent by the expression pedal instead (pads 6,7,8)? If so what should be the the first parameter of the expression set to (pad 8)? Many thanks!
Hi. If I remember correctly, Expression pedals are meant to be used for CCs only. Volume, expression, mod wheel and anything that can be assigned to a CC #.
Hola, que tal? Me gustaría saber se además de todas las configuraciones de cambios de efectos, volumen, etc. se podría también tener acceso a la sección de grabación como: PLAY, REC. ADELANTAR, RETROCEDER, MONITOR, BORRAR TRACKS ETC. Seria posible con el FCB 1010, para poder tener las manos totalmente libres para estar siempre en la guitarra? Esto para mi seria Super. Muchas gracias.
Thanks for the clear instruction for the Behringer FCB1010! Do you know how could we configure the button to send the SysEx "Text in HEX format" message? Thanks in advance!
@@InTheMixReviews No, My Yamaha SX900 will send and receive the ASCII text for the PATH location of the registration file in the SysEx format. Hence, I want to program the FCB1010 to send the PATH in the SysEx format, so it will call the registration up when I press the preset button.
I just bought a 1010. My audio interface (Focusrite Scarlett 2i2 3rd gen) doesn't have MIDI in. How can I connect it? Can I connect it to my computer through USB?
Looks like I'm two years late to the party and also new to the FCB1010, but I have to say this is absolutely the best tutorial I've seen on UA-cam regarding Musical Equipment. In The Mix your thoroughness is second to none. Before I buy this there is one question. Will I be able to control 16 MIDI devices or up to 127?................ Thank you for a wonderful presentation and BTW you have a great voice.
Thank you Robert! I tried to demystify this pedal the best I could . So are you trying to control all these devices in real time? FCB1010 CAN transmit over 16 midi channels. So you could potentially daisy chain 16 midi devices and control something on each device independently for simple configurations. For anything complicated, you'll run into limitations pretty quick. For one thing, certain parameters are Global like mentioned in the video, so you won't be able to assign the same parameter to a different switch and transmit over a different channel. In other words, you would need to know what it is you're trying to control on additional devices...and then figure out what midi messages are going to be used to trigger those parameters. Is it just a simple PC message? Is it a string of midi data? If you run into issues, then you might have to use additional hardware/software to re-channelize messages...etc. There's no simple answer for this. Most likely you'll need multiple FCB1010s to control a big network of midi devices.
@@InTheMixReviews ... Got it, 16 channels in relatively simple work flow.... Digital mixer, 2 to 5 synths, 2 guitar effects pedals, channel switching on MIDI amp, perhaps 2 recording consoles, yes less than 16 at the moment. Looking simply to start with being able to set song lists where program changes would sync all gear in real-time and build into more elaborate schemas.... I was initially concerned with how many channels could be sent out at one time. Despite the limitations, as you have pointed out, some of the workarounds could be setting up scenes per device and just triggering them from MIDI. I did stumble on a new software based package, if you hadn't seen it already.....not a trusted secure site, but I had no problem there. You may wish to scan it first thru Kaspersky. www.muckuper.com/ Thanks Again! & Best Wishes Rob
Thanks man. I haven't personally used it with AmpliTube, but I know in the FCB1010 Facebook group there are users who do. You might wanna post your question and/or search the group for similar posts.
A lot of ungrateful people write silly messages sometimes. They don't realize the time and effort it took to put this video together. Thanks for your kindness.Glad you found it helpful.
Dear Sir, I have an electronic wind instrument (Roland Arophone AE-30 Pro). I am looking for a foot controller which can control the pitch bend (up & down). Can one of the panel of the FCB1010 control the up pitch bend and the other panel control the down pitch bend? Thank you
Does adding the chip for being able to use a Boss RC-505 remove any of the standard features of the foot pedal, or does it simple add more features? I'd like to be able to use this for guitar, synths, and also the Boos RC-505 mk2, without removing any of the stock features.
How can I use this as a chromatic synth bass trigger that would make sense? It almost appears like a keyboard arrangement, except it’s missing note A and/or B, or at least arranged strangely.
Jesus. How did you figure all this out? Only watched this once and still kind of clueless on how to make it work with Fruity Loops, though I'd imagine there is some way yes? Thanks for the efforts.
Hi Frank . Yeah I had to become an astronaut first unfortunately. That part was easier 😂 I’m not familiar with Fruity Loops but if its functions CAN be controlled remotely with midi, then the answer is yes.
How do you assign different parameters to the pedals themselves? Like if I want them to control gain and reverb and not volume and wah? I am not finding that specific task in this video or any video! And it is not in the manual either. I see pedal calibration for other usages, but not for that precisely.
Because it’s the same exact procedure as assigning the pedals to volume. If that parameter in the target device CAN be remotely controlled with a CC #, you assign that CC# to the pedal and that should do it. That is not really a FCB1010 question. That’s more a question for the target device. You gotta figure out how that particular parameter (such as gain) can be remotely controlled per device’s manual first and then program the pedal accordingly.
Okay that does make sense. -So I need to go back to that part and really understand it and then apply it in that way to the pedal. I just need to understand exactly how to assign the CC# to the pedal. I don't think I need the computer to do this, do I? But yes, basically I want to have one pedal control the gain and the other control the reverb. I did calibrate them though. -I actually just bought the FCB1010. I have had the VAMP for awhile. But it was taking forever to find a good cheap controller that wasn't too old with old firmware and that was in good condition. So I did find one for $100 on FB marketplace. She bought it new in 2013 and used it about a year. I cleaned it up and it looks new now, and to my surprise already had the 2.5 firmware, and it did talk to the VAMP right out of the box. Right now one pedal is wah and the other is volume, and is that way on all the patches. I know you can assign them different for different banks so that is nice. I just need to get really familiar with this. I know there used to be an FCB1010 group on Yahoo but I think that is gone now. Surely there is another one somewhere! Anyway thanks for your response bro, it was actually very helpful.
@@michaelhildreth9609 It's no trouble at all. Yes, Yahoo groups are gone forever, but there is a Facebook group. I'm not a guitarist so I can't give you specific info from a guitarist point of view, but we definitely have guitarists in that group that use amps, sims...etc. In general, what you said is correct. Let's just say your device requires CC#66 for 'Gain'. You'll assign one of the two pedals to CC#66 the same way CC#7 is assigned to volume. FCB1010 doesn't really care. It just transmits whatever CC is being assigned to by the user. In that case, that pedal should control the gain. Some instruments have to be put in a special mode or be on a particular channel in order for this connection to work. So that's another thing you need to find out about your device. You do NOT need a computer. This video will show you all that.
I have FCB1010. I don´t want to have programchange. Only snippets on our BehringerX32 mixer and this is midi channel 2 on the mixer. Can you make a simple film about this configuration. Snippets on the mixer is 00, 01, 02, 03, 04, 05, 06 and so on
Sooo I would like to control my analogue guitar pedals with the board. can I daisy chain out of the switches 1/4 inch jacks out of the back and control multiple pedals this way?
Correction: The software editor that comes up towards the end of the video is Ed Dixon's and not the one from the Mountain Utilities website. Check the description for related links. Here's the link to FCB1010 Manager (FCB1010 software editor): ua-cam.com/video/MMJQ-AHRSMs/v-deo.html
Behringer should pay you for this, you are doing them (and us) a great service. Great video!
I couldn't agree with you more! But no, they didn't even send me a thank you note! ha ha ha
@@InTheMixReviews That is so lame! Well, I can say, without a doubt, that we all appreciate your attention to detail to make this awesome video for us!!👍🙏
Thanks a lot!
I don't have this foot switch but I watched a video, it is don greatly. If I buy this, only because of this vid.
I've had The FCB for over a year now, just sitting on the floor collecting dust and dirt.. THANK YOU!
Now I can finally use it, it became from my worst enemy to my dearest friend within this 46 minute video tutorial.
So many options my mind is blown. I didn't even know what to do with it,, but now I am completely overwhelmed by the sheer number of possibilities this device can be used for.
So I will say it again, THANK YOU!
Thanks a lot. I'm glad this video helped you get back on track. This pedal is one of the hardest midi devices I've ever worked with. It's not user friendly at all...until you understand its structure and all that. Once you do, it's a wonderful pedal!
Thanks for the very useful tutorial. Here are the timestamps to the different sections:
0:31 Brief Overview
2:48 Firmware Revision
5:25 Selecting Banks & Presets
8:07 Preset Editing Mode & Midi Functions
11:16 Midi Devices & Midi Commands
13:10 Programming PC Messages
17:06 Assigning Multiple PC Messages to a Preset
19:24 Programming MSB/LSB/PC Messages
22:14 Programming Expression Pedals A & B
27:42 Programming Note
28:55 Virtual Instruments
31:07 Relay Switches 1 & 2
35:37 Midi Channel Assignments
39:07 Daisy Chaining
42:25 Data Management
Thanks a lot!
Very good. Thanks for breaking it down... best Steve
The world is a better place because of people like you. Thanks!
Thank you @sweenetto
Thanks !
This is such a great tutorial! Subscribed ✅️
I just got mines today. I've seen people talk about how complicated it was to use and realized today why. They ship these with literally no user manual and expect us to just know how to use it right out of the box. Thanks for helping us understand how this device works!
One of the best instructional videos I’ve ever seen! The graphics with the arrows and the inserts clearly direct attention where needed and show what’s happening. Clear, concise, and thorough. Brilliant job! My FCB1010 should arrive in a couple of days, and now I’m looking forward to diving in instead of dreading it. Thank you for this!
I've got one of these arriving in the next 24 hours with no experience of programming it I thought I'd try YT and see if anything would help - this video was excellent 10/10 - it explained all the steps clearly and the examples were shown at a perfect speed and with relevant content . Many thanks.
This is by far the best fcb1010 tutorial! It’s such a complex system and your tutorials make programming it a breeze!
My unit came without a proper manual. I could not have been started without your help. THANKS.
This is hands down the greatest youtube tutorial I have ever watched. Thank you so much. Thanks to you I now have the knowledge and power to switch from vegetarian industrial death metal to porn groove deep house with the push of a button. Now I just need to find a Midi compatible toaster and I'll be set for life. Definitely subscribing!
Thanks a lot for the compliments. Happy to hear about your positive experience.
it's amaizing how clear, calming and patient your naration is.
Thanks. Yes, we figured by the time people find this video, they're about to give up on life altogether...so a calm voice would do just fine. :)
The only thing motivating me to figure this thing out at this point is spite.
@@ericdodd4146 What's spite?
@@InTheMixReviews A desire to stick it to whoever invented this piece of gear by learning how to use it myself. I was being facetious. Neat tutorial!
@@ericdodd4146 It's ridiculously confusing indeed! I asked for a lot of help myself. Glad you found it useful.
THANKS SO MUCH for including the info on programming and calibration of the expression pedals. I just received a brand new FCB1010, and was trying to set it up to use with my iPad. When trying to route the expression pedals to control an app, it showed the pedal going from 0 to 127 almost immediately, barely moving the pedal. I tried all kinds of stuff, but no change. Then I remembered the calibration procedure you described, and tried it… bingo! Works just right now. BOTH exp pedals were in this state, and the calibration fixed both of them. Once again, Extremely grateful that you included this info; not sure anyone at Sweetwater would have known… and absolutely disgusted with Behringer that they actually ship the FCB1010 in this condition…
Sweetwater products links are your best buddy! Sweetwater takes the time to do tutorial videos often, as they have done with this product! Check the product page to see their instructions.
I watched this a few years ago when I got my FCB101, I am so glad I watched it again. Very helpful and much appreciated! Thank you!
So thankful for this tutorial. I greatly appreciate the time you took out of your life and schedule to make this video. Know that you have really helped someone and saved them a lot of frustration! Thanks again!
Thank you very much dear Dennis. Yes, it wasn’t easy to make this but I knew it had to be done.
Thanks! Brilliant.
Thanks a MILLION... Had no idea I had to attend school to use MIDI footswitch but I'm glad I learned all of this.
Glad to be of help. Yeah unfortunately Behringer does require university degrees for this pedal! 😆 but I tried to demystify it as best as I could.
Omg, this is so good. The choices of what is discussed, the explanations are so good. Thank you so much for this great video.
Thanks a lot
I used this video to help set up an FSB to control XR18 channel mutes. Awesome reference work and great narration. Thanks so much!
Wonderful! Glad to know you found these general information helpful.
This is exactly what I have been looking for. I do solo performances on keyboards and on many occasions I need both hands free and instead, I'm hoping to be able to change the chords of the styles with my foot. I have to try this. thanks a lot for this great tutorial.
Thank you super much! I have watched many other videos about using the FCB1010 and also read the manual, but only this video explained some critical details, which both the manual and other videos left out. Now finally it all makes sense!
Thank you - extremely well presented and very easy to follow! I could have never done this following Behringer's instructions.
I still have PTSD for making this video! 🤣… I’m glad I was able to put this video together.
I'm glad I found this channel, One of the best UA-cam channels there is.
Thank you William. You’re too nice.
definitely a video to add to the saved list :-) finally figured it out. I don't know who designs these things, they didnt have keyboard players in mind when they did. Not being able to change midi channels on the fly is a real pain.
On minute 8:32 on the video, you said that there is absolute no difference between the switches, implying that, for instance, switch 1 to 5 could also be used to send CC messages. How do I change the midi function of the switch? In my case, I need to send CC98, CC99, CC06 and CC38 to my Pa5X, but I found nothing showing how to do that with this pedal. Can a switch really be configured to send CC instead of PC?
Great job, I just got mine haven't even plugged it in yet... I really can't wait to tear this thing up let's GO!
Congrats! What are you gonna use it with?
This was extremely helpful tutorial thank you so so much. My friend and I would have been lost in the weeds trying to figure this out on our own. He bought one of these for 80$ at pawn shop
Really glad to be able to be helpful.
In The Mix more than helpful, a life saver. I would not have been able to figure it all out. You did an excellent job of being very clear and concise with your directions. Like someone else said Behringer should have paid you for this because you did such a good job
This is very clear but I am new to controllers, midi, cc, pc, etc. I wish there were a video for beginners. If I understood what was being taught here, this video would be very helpful.
This video would answer some of your basic midi questions: ua-cam.com/video/xs62GSaP51A/v-deo.html
God bless you 🙏 idk how I was gonna program the fcb without your video.
Happy to hear that. What device did you program it for?
@@InTheMixReviews the boss katana 100 watt mkII
Magnificent tutorial.. I set this pedal aside after reading the manual because the manual sucked and couldn't tell me what I needed to do! You made it simple. (I am not a novice with midi either this is just a confusing manual.) Thank you ever so much!!!
I totally agree with you. That’s the most discouraging manual I’ve ever seen. It only makes sense for those who already understand the basics of this pedal which kind of defeats the purpose. Glad you found the video helpful. Thanks a lot!
Wow! THE most comprehensive tutorial video ever. You should sell it to Udemy or the like.
Ha ha ha . Thanks a lot. Yes it has helped many users. 🙏
I love this video purely for making me realise that it's possible to mod the horrible firmware that this otherwise very powerful piece of hardware ships with!
Well, that was spectacular! I had no idea how powerful this thing was. Fantastic video presentation of it all ... except what's in the next video hahaha! Thanks for your work! Behringer should pay you!
Thank you PinkPonyOfPrey. Yes this is a great pedal indeed! You said " except what's in the next video"? What's in the next video that you didn't like? ...I know! Behringer didn't bother to make a video. I guess I should've got paid for this. ha ha ha
I just haven't watched the next video, so I can't know what's in it yet, but I assume that unless you ran into something hard after the first one the next video is as good as this one hehe! :D
lol! I actually did run into a few obstacles but I was able to get in touch with Mark who's the genius behind FCB1010 software editor and he answered all of my questions. It's a very nice editor for sure.
Wishlist, A video on guitar-in effects of the Korg PA700 using the FCB to switch from clean, chorus and distortion for my electric guitar. Thank you
Honestly you have all the instructions you need in this video. You just have to look up the manual for your target device, and see what midi parameters are assigned to that particular feature. Then, you program the FCB1010 with those values. You can also try the Facebook group. Many different users who use all kinds of gears in there.
@@InTheMixReviews Thank you for the response, I have followed your instruction. I can use all of the Korg commands: variations, fills, stop, etc..on my PA700
Choosing a Voice/Guitar Preset for my electric guitar plugged in the guitar/mic input. Trying to access the patches by default, the book states:
Voice/Guitar Presets can be selected by sending a series of messages on the MIDI channel assigned to the Guitar Processor.
▪ Control Change #00 (Bank Select MSB) message with value ‘0’. (CNT1)
▪ Control Change #32 (Bank Select LSB) message to choose the type of preset. (CNT2) and add the preset CC32 Value (one of the three : Factory: 0, User : 1, Local 2)
Using the voice/guitar effects
▪ Program Change message to choose the preset. Preset PC Number (PC5) Preset 1…64 0…63
If your controlling device can only send Program Change messages, manually select the type of preset (Factory, User, Local).
Works, but it also it changes the style on the keyboard. The coding is very similar for styles.
FCB1010 works great after looking at the video and follow the instructions. Any help would be very much appreciated. Thanks
is it possible to have multiple keys turned on at the same time ? like for example let' say you have a clean guitar sound on key 1 , a distortion guitar on key 2 ..but you want to toggle on and off a delay assigned on key 6 .. i can do this but when i hit the key 6 to activate or desactivate the delay ..it turns off the red light of the key 2 i still have the distortion but visually it's confusing ...i would simply like to stay on key 2 and turning on/off the key 6 ..if that makes sense :)
This video completely saves the day you do need to put attention 💯 in every word but i finally understood how to program my korgpa1000
Wow, what an amazing tutorial! Well prepared, precise and to the point. Easy to follow. Really great work guys.
Thank you. Great content! So much information, need to watch it many times! A little more space dead space between all of the points that you make would allow the listener time to (at least me!) to understand and retain all the gems! Thanks again. Best Steve
Thanks a lot. I figured if you guys want to go over something, you can just pause and repeat a section. If I put in dead space, it would've made the video a lot longer than already is.
Best tutorial so far. Should be promoted for more views.
Thanks a lot!
First and foremost, thank you thank you thank you. You are a wealth of sought after information. I have a question regarding preset configurations and whether you can upload along with program and control changes and sysex data?
A useful video thank-you. 🙏 The biggest limitation of the fcb1010 is that MIDI channel selection is only global, so it cannot be used to send control multiple devices. So disappointing. 😢
True. That setting is global.
Studied this while waiting for my new FCB1010 to control my new KETRON SD2 . When I got the pedal, just for grins went ahead and plugged it in without programing( CASIO PG-308 Synth guitar > FCB1010> KETRON SD2 sound module) was pleased that out of the box it controlled the first 100 sounds of the KETRON! The FCB1010 bank 00 and footswhitch 1 matched KETRON 1 Grand Piano..etc; bank 01 footswhitch 1 = ketron 11...etc. So cool, QUESTION IS: WHAT ABOUT THE OTHER SOUNDS ON THE MODULE? The match out of the box was to what KETRON calls "VOICE BANK A (control change 00, Value=0)" and that has 128 sounds, so as described above I can call up the first 100. This module has 3 voice banks with 128 sounds each plus a "Preset Bank" of 128 plus "Live Drum sets" x 82! Thank you so much for this, had a Behringer FCB1010 a few years ago and sold it in desperation!
I hear you! For a lot of people the FCB1010 end it up in the closet! I don't see why you shouldn't be able to call those patches located in additional banks. Most controllers default to the first bank which is why you don't have to do additional programming. Did you look through the manual to see if these extra bank have anything assigned to them? You probably need 3 entries for those presets : CC00/CC32/PC
Thanks for the reply, am a super old and a nube at this, Well, the default bank I mentioned says : VOICE BANK A (control change 00, Value=0)". The next one says Voice Bank B(control change 00, Value= 1). Next Voice Bank C( Control Change 00, Value = 10 ) Next one ( Control Change 00, Value = 2 )..etc. Ok so need to watch your viedo again figure out how to change that VALUE #...
You CAN do this. It's not as hard as it looks. Yes, you'll find all that visual help in the video. (Pay attention to 19:24 mark) .
You saved my life! Tutorial n. 1!🏆🎖🏅
Such a great, well made video. Thank you! I hope others learn from what you do here.
You are amazing! This is a fantastic video and really shows off the power of the FCB1010. I just bought one after watching your video. Thank you so much for putting this together, I really enjoyed watching this and will surely keep coming back as I start to program my new FCB1010.
Thank you very much! Glad you found the video helpful. It's a very good pedal indeed! Definitely let me know about your new set up and all.
This is so perfect and clear. You have totally demystified this thing.
Thank you Caroline....Hopefully it will help the new users....or encourage those who have thrown it in the closet. It's a very good pedal!
Wow. This is a really really good, well prepared video. You are awsome for doing this. Detailed accurate and well thought out. You have a bright future.
Thanks a lot! Glad you found the video helpful.
Thanks!
very good instruction i love how easy your voice is to listen too
Thank you Chris!
Thank you for this excellent tutorial. Do you know if it’s possible to cause the lights on the FCB1010’s switches to correpsond with the on/off states of VST effects pedals? In other words, to use the foot switches as toggles and have the LEDs reflect that?
Thanks a lot. That I’m not sure about. It’s been a while since I’ve used the pedal. Try the Facebook group. Maybe one of the 3rd party chips does that.
@@InTheMixReviews Yes, someone on reddit said it's possible with the uno chip.
That’s what I was thinking. Especially with the latest version, there’s all kinds of stuff you can do.
This is the best tutorial for the fcb1010 but oh the boring monotone voice - you can visualise the finger moving under the script
Thanks! Behringer has a professional FCB1010 video though. You should totally check it out!
First. Thanks for the video. High quality and clear. I have a question. I use keyboards of the type: Yamaha S X900
Do you know if it is possible to set the fcb 1010 to be in the role of multi pad or reset tap tempo and more? I would love for you to answer me. thank you very much.
Glad you found it useful. What are the midi parameters assigned to those keyboard functions ? That would be a good starting point for any midi device.
The truth I do not really know. I will check it. Still thank you very much for the quick response I am surprised. This is amazing.
Extremely professional! Many thanks
Hidden gem - thanks a million!
Thank you Michael!
Very nice and comprehensive video. Wondering if you know of how SysEx commands could be sent directly to devices using the Mountain Utilities FCB1010. There are specific functions that my gear only receives SysEx commands for, not PC or CC commands. Thanks for the video.
Thanks! I could be wrong, but I don't think you could do that. I mean the program does send and receive SysEx, but that pretty much includes PC and CC settings.
Thanks for the response.
This is an EXCELLENT tut!! Thank you so much!
On point, very informative, this is an amazing product!!!
Fabulous video. Really informative, clear and well presented. I wish I'd had this when I first purchased by FCB1010!
Thanks a lot Sound Sphinx. Hopefully I'll have something useful for you in the future.
Lifesaver!!! Thank you guys!!!
I would really love for you to do a video with just Mini controlling guitar amps that have Built-in effects as well as being Daisy chained to TC electronic's G force.
As far as the connection goes, the principles are the same. The only thing different would be the actual Program Change messages and Controller numbers that are specific to each individual device. As far as using an editor, I'm recording a follow up video for the Mountain Utility Editor by Ed Dixon at the moment. Will eventually do device specific videos as well.
Awesome Video, Thank You. I am programming the footswitch to control Note on messages for a light controller, the switches are acting as momentaries....how to you program so it latches?
Please visit the FCB1010 Facebook group. There are users with 3rd party chips that might interest you.
Not sure if you mention since I only skipped around, but there is third-party software called iFCB that let's one edit the FCB1010 on a computer via USB. Pretty handy stuff! Also thanks for a great tutorial!
Yes, there are multiple editors available. There is no USB connection on the FCB1010 so you would need to use a 5pin to usb interface such as M-Audio UNO. I also have a full tutorial for FCB1010 Manager which is a free editor.
i was going to buy this controller for my digitech rack effect (i am justy getting into MIDI and rack stuff) i have also a mesa studio pre that needs a footswitch to change channels. do buttons 6 to 10 dont allow program changes? and can i set the switch to momentary latchins ( so if i touch one preset it just changes channel on the amp?)
Like it was mentioned in this video, all 10 pedals CAN be programmed the same way. Anything switch 1 can do, switch 10 can do as well. I know there's a 3rd party chip 'UNO' that adds a lot more interesting functionalities like what you're looking for. There are a lot of guitarists in the FCB1010 Facebook group. You might want to post your question there as well.
I have had one for years. Never used it. Now I want to use it with an FX2000 3D. I simply want to assign each button to toggle on and off a single effect on the FX2000 I am watching your video right now to figure out how to do this.
this is must watch if your new to Midi and you buy one of these pedals
Thank you Robert. That's exactly what the purpose of this video is.
excellent and very thorough video, thanks
Congrats & Thank You for such a comprehensive and detailed tutorial !!!
I was wondering if there is a way to set a pedal for an "octave down" change. I believe this would require 12 "semitone down" messages stream programmed into one pedal.
Another interesting challenge could be sending 12 "semitone up" messages to return to original octave when the pedal is released. I'm afraid these will not be possible.
Thanks, glad you found the video useful. If 'Octave up/down' change feature has an actual program change or some type of CC# assigned to it (on your device), then it's only a matter of programming the FCB1010 to transmit that data. The FCB1010 never knows what it is you're actually controlling. As long as that or any other particular feature CAN be remotely controlled with a program change or CC#, you'll be able to make that happen. Now the 2nd part of your question is interesting. It's been a long time since I've used this pedal, so can't give you the answer for certain, but if I remember correctly, the UNO chip (3rd party) has interesting capabilities that do things like that. I recommend that you check out the Facebook group, and post this question on there. There are many users that use this pedal for a wide range of devices. You may get better suggestions, especially if you give more details about the midi device you're trying to control...etc.
@@InTheMixReviews so many thanks for your fast and crystal clear detailed reply, truly appreciated. Just as a minor contribution, I thought of a more generic than specific interest. Quite a few midi implementations seems to handle octave up/down compared to semitone transpose support. So, the idea would be to check the chances of sending a stream of -/+12 semitones down/up to make an octave shift. Would it be possible to store a stream of CCs (rather than a single one) in one pedal?
In anyway, thank you again for being so kind and bring extra reinforcement to all these details for us. I enjoyed your warm reply and will follow your advise to check with user groups. Cheers!!!
@@dakoiaa A stream of CCs? I don't think that's a possibility. I see why you would need a number of them to make the Octave shift possible (if there's no single midi commend available for this feature), but what would be an example for such a stream? Would that be a string of the same CC#?
@@InTheMixReviews Hi, thanks for this wonderful interaction 😃 !
Yes, it would be a string of the same CC#. The example I thought of is a stream of 12 semitone-shifts to comprise an octave, since most synths' midi do not offer a single CC# for that. I'm about to buy a 1010 and I realize you think that's not possible with it. That's what I was afraid of.
Yes, I don’t think that’s a possibility.
I have the Behringer FCB1010. I bought this to change drum kit sounds on my Alesis Strike Pro SE set. The Alesis manual says cc 118 and 119 go forward and back through the kits. I need midi channel 2 with the 2 numbers on 2 different pedals so I can change sets during my drum solo. How is this done?
Hi I managed send NPRNs by sending MSB and LSB through CNT 1 & CNT 2 (pads 6,7) together with sending program change (pad 5) with the desired value. Can the value be sent by the expression pedal instead (pads 6,7,8)? If so what should be the the first parameter of the expression set to (pad 8)? Many thanks!
Hi. If I remember correctly, Expression pedals are meant to be used for CCs only. Volume, expression, mod wheel and anything that can be assigned to a CC #.
Awesome awesome tutorial. Thanks guys for your time helping us!
Thank you Baba for acknowledging . I appreciate that!
@inthemixreviews Can the MIDI parameters be programmed via Software? If so, which one?
Yes, please look at the description of the video. There's also a dedicated Facebook group.
Very clear tutorial. Great work
Hola, que tal? Me gustaría saber se además de todas las configuraciones de cambios de efectos, volumen, etc. se podría también tener acceso a la sección de grabación como: PLAY, REC. ADELANTAR, RETROCEDER, MONITOR, BORRAR TRACKS ETC. Seria posible con el FCB 1010, para poder tener las manos totalmente libres para estar siempre en la guitarra? Esto para mi seria
Super. Muchas gracias.
Thank you very much for making this video. You are amazing! ⭐️⭐️⭐️⭐️⭐️
Thanks for the clear instruction for the Behringer FCB1010!
Do you know how could we configure the button to send the SysEx "Text in HEX format" message?
Thanks in advance!
You’re very welcome. Are you talking about creating back ups?
@@InTheMixReviews
No, My Yamaha SX900 will send and receive the ASCII text for the PATH location of the registration file in the SysEx format. Hence, I want to program the FCB1010 to send the PATH in the SysEx format, so it will call the registration up when I press the preset button.
I just bought a 1010. My audio interface (Focusrite Scarlett 2i2 3rd gen) doesn't have MIDI in. How can I connect it? Can I connect it to my computer through USB?
Yes. I use midi to usb cables. Links in the description
Thanks for making this thorough tutorial.
Looks like I'm two years late to the party and also new to the FCB1010, but I have to say this is absolutely the best tutorial I've seen on UA-cam regarding Musical Equipment. In The Mix your thoroughness is second to none. Before I buy this there is one question. Will I be able to control 16 MIDI devices or up to 127?................ Thank you for a wonderful presentation and BTW you have a great voice.
Thank you Robert! I tried to demystify this pedal the best I could . So are you trying to control all these devices in real time? FCB1010 CAN transmit over 16 midi channels. So you could potentially daisy chain 16 midi devices and control something on each device independently for simple configurations. For anything complicated, you'll run into limitations pretty quick. For one thing, certain parameters are Global like mentioned in the video, so you won't be able to assign the same parameter to a different switch and transmit over a different channel. In other words, you would need to know what it is you're trying to control on additional devices...and then figure out what midi messages are going to be used to trigger those parameters. Is it just a simple PC message? Is it a string of midi data? If you run into issues, then you might have to use additional hardware/software to re-channelize messages...etc. There's no simple answer for this. Most likely you'll need multiple FCB1010s to control a big network of midi devices.
@@InTheMixReviews ... Got it, 16 channels in relatively simple work flow.... Digital mixer, 2 to 5 synths, 2 guitar effects pedals, channel switching on MIDI amp, perhaps 2 recording consoles, yes less than 16 at the moment. Looking simply to start with being able to set song lists where program changes would sync all gear in real-time and build into more elaborate schemas.... I was initially concerned with how many channels could be sent out at one time. Despite the limitations, as you have pointed out, some of the workarounds could be setting up scenes per device and just triggering them from MIDI. I did stumble on a new software based package, if you hadn't seen it already.....not a trusted secure site, but I had no problem there. You may wish to scan it first thru Kaspersky. www.muckuper.com/
Thanks Again! & Best Wishes
Rob
Hi great video, how do I get the 1010 to control parameters in my AmpliTube 4 Daw?
Thanks man. I haven't personally used it with AmpliTube, but I know in the FCB1010 Facebook group there are users who do. You might wanna post your question and/or search the group for similar posts.
@@InTheMixReviews many thanks I’ll try that option 👍
Could this video be done with a Yamaha Genos? I can't program the pedal for the Genos. Thanks
What a perfect tutorial
Thank you so much !
You're very welcome!
Thank you so much!!!! Excellent video!! So grateful!!
You're welcome Rockstar.
Very helpful. Thanks for making this video!
only half way through but this is so so useful, thank you
You're welcome! What are you going to use the FCB1010 with?
@@InTheMixReviews mainly for controlling mainstage, and in my max patch for some very inefficient non synced loops setup i made :)
What a great video, it was very informative!
A lot of ungrateful people write silly messages sometimes. They don't realize the time and effort it took to put this video together. Thanks for your kindness.Glad you found it helpful.
Excellent job! Thank you very much!
You’re very welcome. Glad to be helpful.
Dear Sir, I have an electronic wind instrument (Roland Arophone AE-30 Pro). I am looking for a foot controller which can control the pitch bend (up & down). Can one of the panel of the FCB1010 control the up pitch bend and the other panel control the down pitch bend? Thank you
Hey Mike. Are you talking about the expression pedals or switches?
Does adding the chip for being able to use a Boss RC-505 remove any of the standard features of the foot pedal, or does it simple add more features?
I'd like to be able to use this for guitar, synths, and also the Boos RC-505 mk2, without removing any of the stock features.
I highly recommend that you post this question in the Facebook group. Many experienced users there who use non-factory chips
How can I assign chords to FCB1010? For example, #1 to Dm, #2 to Cm etc.
Thank you thank you and THANK YOU!!!
You’re welcome! 🤣
Now thats a tutorial, thank you so much
Glad I was able to help.
This IS rocket science for me :)) but well done 🤟
It is complicated but I did my best to help. :)
OUTSTANDING!!!
Hi! Thanks a lot for this great work. I was wondering if you covered CC commands in an other video (without expression pedals)
Hey Max. Thanks a lot. No, I don't have a separate FCB1010 video besides this one. The other one I have is for the FCB1010 Manager.
How can I use this as a chromatic synth bass trigger that would make sense? It almost appears like a keyboard arrangement, except it’s missing note A and/or B, or at least arranged strangely.
You mean to trigger a series of notes by pressing a single switch on the FCB1010?
@@InTheMixReviews Yes. Not sure why they didn't choose to have a full chromatic key layout.
Yeah I don’t think that’s possible, at least not from the FCB1010 side of things. If I remember correctly, it’s one note per switch.
Jesus. How did you figure all this out? Only watched this once and still kind of clueless on how to make it work with Fruity Loops, though I'd imagine there is some way yes? Thanks for the efforts.
Hi Frank . Yeah I had to become an astronaut first unfortunately. That part was easier 😂 I’m not familiar with Fruity Loops but if its functions CAN be controlled remotely with midi, then the answer is yes.
How do you assign different parameters to the pedals themselves? Like if I want them to control gain and reverb and not volume and wah? I am not finding that specific task in this video or any video! And it is not in the manual either. I see pedal calibration for other usages, but not for that precisely.
Because it’s the same exact procedure as assigning the pedals to volume. If that parameter in the target device CAN be remotely controlled with a CC #, you assign that CC# to the pedal and that should do it. That is not really a FCB1010 question. That’s more a question for the target device. You gotta figure out how that particular parameter (such as gain) can be remotely controlled per device’s manual first and then program the pedal accordingly.
Okay that does make sense. -So I need to go back to that part and really understand it and then apply it in that way to the pedal. I just need to understand exactly how to assign the CC# to the pedal. I don't think I need the computer to do this, do I? But yes, basically I want to have one pedal control the gain and the other control the reverb. I did calibrate them though. -I actually just bought the FCB1010. I have had the VAMP for awhile. But it was taking forever to find a good cheap controller that wasn't too old with old firmware and that was in good condition. So I did find one for $100 on FB marketplace. She bought it new in 2013 and used it about a year. I cleaned it up and it looks new now, and to my surprise already had the 2.5 firmware, and it did talk to the VAMP right out of the box. Right now one pedal is wah and the other is volume, and is that way on all the patches. I know you can assign them different for different banks so that is nice. I just need to get really familiar with this. I know there used to be an FCB1010 group on Yahoo but I think that is gone now. Surely there is another one somewhere! Anyway thanks for your response bro, it was actually very helpful.
@@michaelhildreth9609 It's no trouble at all. Yes, Yahoo groups are gone forever, but there is a Facebook group. I'm not a guitarist so I can't give you specific info from a guitarist point of view, but we definitely have guitarists in that group that use amps, sims...etc. In general, what you said is correct. Let's just say your device requires CC#66 for 'Gain'. You'll assign one of the two pedals to CC#66 the same way CC#7 is assigned to volume. FCB1010 doesn't really care. It just transmits whatever CC is being assigned to by the user. In that case, that pedal should control the gain. Some instruments have to be put in a special mode or be on a particular channel in order for this connection to work. So that's another thing you need to find out about your device. You do NOT need a computer. This video will show you all that.
Excellent video. Very informative. Very well edited.
Thanks a lot. Glad you liked
I have FCB1010. I don´t want to have programchange. Only snippets on our BehringerX32 mixer and this is midi channel 2 on the mixer. Can you make a simple film about this configuration. Snippets on the mixer is 00, 01, 02, 03, 04, 05, 06 and so on
Sooo I would like to control my analogue guitar pedals with the board. can I daisy chain out of the switches 1/4 inch jacks out of the back and control multiple pedals this way?
I’ve never tried that so not sure if it’s done the same as midi. If you’re on Facebook, try the FCB1010 group. A lot of guitarist in that group.
@@InTheMixReviews Awesome , Ill head over and see what I can find out . Thanks for the lead :) have a great one . Fantastic vid btw :)