I really like your new hatch placement, it blends with the plane structure better than the standard ones. Feels like its a part of the structure not the hole in the plane :)
What amazes me most is how far you came! From dinky little planes you wouldn't fly to perfectly designed Rc aircrafts. You surprise me each time you start a new project and how you're able to adapt and change designs for the better. Great work!
Again another great build, My wife and I work for Flight Safety in Greensboro NC at the Honda Jet center we provide the flight training for for the Honda Jet. Thanks for another great video
Nice bird and technically just superb execution. You have become over the years a great experienced builder, with a lot of passion and you always find a solution once you need to carry out some trouble shooting. My sincere complements from Switzerland. Amazing. I as well remember your first RC plane builds. We all need to start somewhere, but the nice thing about your channel, is that you showed from day one up to today your evolution your learning curve. You have become a MASTER.
I understand so much about recording slowing someone down. I eventually changed my methods, build and only film the milestones of each component as a B-Roll while talking. Congrats on finishing the Honda Jet! Also: nice life hack with the masking tape when applying glue to limited areas
Brilliant! I am cautious like you when it comes to a new plane. I finished my ASG 29e, a 6 meter from Tangent, and it has been almost 2 months waiting for good weather; the Midsouth has had crazy weather😂 All this to say, fly when you're ready and everything is a go! I learn so much from your posts, thank you!
Perfect gear cinematic, very realistic speed deployment, I like that, kind of details that brings still more magic to your flying behavior. Also the choice of Honda jet , this scale, this is very good. Congrats!
Wonderful craftsmanship, details, and design solutions. Happy you are not doing military designs. You are putting them to shame with your practical and cost-effective design work.
Congratulations Ramy, Another amazing aircraft . I love the size and details. Even without paint this jet looks hot! Honda will probably ask you to build one for their lobby.😜
Might be a comment already, but I believe you put your brass eyelets for servos upside down, flange should go against the mounting surface. Always enjoy watching these videos! Thanks
I really appreciate your craftsmanship and knowledge on what seams like it can give you headache or two. I’d love to pick your brains on how you started and if you could point me in a direction that I can gain an understanding about the possibilities in designing and building an aircraft in the future.
Great and impressive build as usual !!! 1.45 ; In all rush, don't forget to locktide your thread (or to add a locknut) to your servo horn ball link screw, it could cost you a plane.....
Fabulous work, a joy to watch. But its not fair that the plane should be having to do test flights off grass. A decent runway would make it so much easier to do test hops. I bet it will fly beautifully when the time comes 👍
watching your show for some time now (great videos) ... note : using the vacuum while cutting is a good idea for keeping the shop clean , "but" you should consider waring a dust mask - especially with carbon fiber - the shop won't get sick... ha ha
Stay Tuned for the maiden flight!
👍💪✌
yes and prepare a new plane. maybe a cesna 401
🤦
Hi ramy i have a question for you how you calculate the position of center of gravity
@@user-xx3wp7yj5c or a Conquest II
I really like your new hatch placement, it blends with the plane structure better than the standard ones. Feels like its a part of the structure not the hole in the plane :)
What amazes me most is how far you came! From dinky little planes you wouldn't fly to perfectly designed Rc aircrafts. You surprise me each time you start a new project and how you're able to adapt and change designs for the better. Great work!
Thank you!
❤ฝๅ
@@RamyRChow long did it take you to built Honda elite?
That gentle nose wheel lift was so graceful - I'll bet she'll be amazingly easy to handle on approach and landing. Perfect ship!!
Again another great build, My wife and I work for Flight Safety in Greensboro NC at the Honda Jet center
we provide the flight training for for the Honda Jet.
Thanks for another great video
I work in the R&D building. I was also impressed with this build. So so much like the real thing. And you found out, the Hondajet LOVES to fly.
You are more than an expert at this point. You're an absolute artist, Ramy!! I've been in awe of your work from the get go! Beautiful job once again!!
Nice bird and technically just superb execution. You have become over the years a great experienced builder, with a lot of passion and you always find a solution once you need to carry out some trouble shooting. My sincere complements from Switzerland. Amazing. I as well remember your first RC plane builds. We all need to start somewhere, but the nice thing about your channel, is that you showed from day one up to today your evolution your learning curve. You have become a MASTER.
your modeling skills are impressive in a good way, your flying skills are impressive in a bad way!
I understand so much about recording slowing someone down. I eventually changed my methods, build and only film the milestones of each component as a B-Roll while talking.
Congrats on finishing the Honda Jet!
Also: nice life hack with the masking tape when applying glue to limited areas
I´d love to see you build a turboprop like a Pilatus pc-12 or a TBM 930 or even a cessna Grand caravan. nice work! keep it up:)
I second that
Amazing as always. The granite interior is a nice touch!
You never cease to amaze me with your ever evolving build techniques. A wonderfully built jet that looks eager to fly. Thanks for taking us along
I appreciate that you narrate and show how to do these advanced techniques. You are always both entertaining and educational.
Ramy, I admire your skill, determination, perseverance and tenacity. Thanks for posting!
Another in the great line of scratch builds you have done. Can't wait to see the maiden flight.
Wow! That's not just an airplane, it's a sculpted work of art.
Amazing build!
Brilliant! I am cautious like you when it comes to a new plane. I finished my ASG 29e, a 6 meter from Tangent, and it has been almost 2 months waiting for good weather; the Midsouth has had crazy weather😂 All this to say, fly when you're ready and everything is a go! I learn so much from your posts, thank you!
This design such a work of art. Looks and sounds almost like full scale jet.
Great ground crew capturing this magic moment. Maiden time next. ♥👍
A master builder!! Such attention to detail, love it, can’t wait to see the full flight, thanks for sharing 👊🏼👊🏼
Those two hops were a nice tease. Sure looks like it's going to fly! Good luck on the maiden.
Thank you my friend.
I guess this was technically the maiden flight 😊
One more time, it's an amazing work. Congrats Ramy. Thanks for this video.
This looks awesome congrats Ramy 🎉
I admire your job. I'm working as a aircraft composite mechanic and you dooing it perfectly
Congratulatons to your finished Project Ramy! Absolutely Awesome❤
That airplane CRAVES FLIGHT!! Congratulations on such an amazing project! I can't wait to see the real maiden flight.
Looks amazing even without the final paint scheme! Your work is at the highest level!
great workmanship ramy love watching your builds
Ramy, you didn't disappoint once again...magnificent! You are truly a Master Scale builder around the world.
Beautiful! Looking forward to the maiden flight Ramy!!!
Perfect gear cinematic, very realistic speed deployment, I like that, kind of details that brings still more magic to your flying behavior. Also the choice of Honda jet , this scale, this is very good.
Congrats!
I had waited a long time for the update and I'll say I'm super satisfied with the work!
Your Hard Work Watching Indian 🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳
Looks great Ramy!
This is awesome, can't wait to see the maiden flight of this honda jet 👏
Great work! Awesome build! Thanks for sharing with us!
You are the Monet of model builders! As always, great job.
Wonderful craftsmanship, details, and design solutions. Happy you are not doing military designs. You are putting them to shame with your practical and cost-effective design work.
Awesome build as always. Bravo !
13:46 I really liked it how you were setting it using screwdriver.Btw the landing gears looks very durable.Awesome build
Always a pure joy to watch your presentations, and really admire your craftsmanship 👍
Amazing skills Ramy!
Fantastic work! Looks amazing.
Geniuses come one in a million! Great work Ramy! 👍
Very nice looking executive jet. Nice test run, she looks like wanting to soar like a bird. I can’t wait for another one of your birds to fly.
I've been waiting a long time to see this fly... almost there...
A little Howard Hughes HK-1 action going on there. "No, no, we won't be lifting off today..." Right.
Best greetings to Ramy! Next amazing plane, brilliant job!
Man you build beautiful planes so awesome !
It was a huge rc airplane, so it took a long time and effort, but I really want to see it flying in the sky.
I will cheer you on.👍👍👍
Crongrats on the succesfull build and initial tests !
Ramy amazing job as always! Your pulse amazes me how you cut the lines with a raised hand 😧😧
So clean dude! Nice job again! Clean but clean build
Congratulations Ramy, Another amazing aircraft . I love the size and details. Even without paint this jet looks hot! Honda will probably ask you to build one for their lobby.😜
remenbered the firsts videos : what a stunning progress, congratulations !!!; your main's landing supports are strong !!! 👍👍
Beautiful work Sir. 👏
Another amazing build
Suspension works 😂
Awesome job Ramy 👏
Another work of art!
As always, a work of art
Love your videos, another amazing jet.
It wants to go Ramy. Great work.
Wow, absolutely amazing, on a level all your own.
In my experience with the granite paint. A coat of clear help to keep it from collecting dust , and holds the specs down much better
good idea!
Another amazing part, i like the fans that looks like the jet engine.
Ramy focused my god the sky is the limit well done.
*BIG* THUMBS UP 👍 @1:00
You are a master scratch builder I cannot wait for the maiden flight!!
it looks fantastic like all your planes do
Yeah
Excellent work😀👍🛩️
Поздравляю!порадовался вместе с тобой и за тебя!))
Como siempre un trabajo impecable y hermoso. Greetings from Mexico.
Might be a comment already, but I believe you put your brass eyelets for servos upside down, flange should go against the mounting surface. Always enjoy watching these videos! Thanks
Amazing stuff!
I really appreciate your craftsmanship and knowledge on what seams like it can give you headache or two. I’d love to pick your brains on how you started and if you could point me in a direction that I can gain an understanding about the possibilities in designing and building an aircraft in the future.
Watch his oldest videos :) His entire development history is here and its fascinating.
@@randomnickify As a follower for about 6 years I would have said the exact same thing. You learn by doing and trying.
Great and impressive build as usual !!! 1.45 ; In all rush, don't forget to locktide your thread (or to add a locknut) to your servo horn ball link screw, it could cost you a plane.....
That is a beautiful plabe.
super super gemacht .LG Stefan👍👍👍
After a long time finally ❤
Great job!
OUTSTADING JOB....!!!👍👍🙏🙏😎😎I can't wait 2 see it fly...!!!!✈✈🙏🙏👍👍😉😉
Love the videos Ramy! I was wondering if you could show how to set up the elevators, alirons, and that stuff to the controller
A beautiful rc aircraft.👍
Fantastic work. Nice music. BTW, the servo eyelets should be installed from underneath the rubber grommets, not from above.. 😎
Hey buddy, very very nice. Please keep coming out with more vlogs!!
My lovely friend Honda jet nice build 😊😊😊😊❤
I really love the music you use
A fpv system with tilt and pan would probably be a nice addition especially once its in the air
Good job..
You are so intelligent
The master at work
you have never failed to impress me! If you feel up to the challenge can you try to make an Antonov 225?
Nice Ramy
Thank you.
*Let the Sunshine in...*
.
You need to find a local UA-camr that has a lawn/grass channel. They could do a colab with you to level off the grass runway so it’s not so bumpy.
I would love to see you bring your amazing skills to a Antonov AN-225 build.
Sensacional, parabéns linda aeronave 😊
Great job 👏 👍 👌 🙌 😀
Fabulous work, a joy to watch. But its not fair that the plane should be having to do test flights off grass. A decent runway would make it so much easier to do test hops. I bet it will fly beautifully when the time comes 👍
watching your show for some time now (great videos) ... note : using the vacuum while cutting is a good idea for keeping the shop clean , "but" you should consider waring a dust mask - especially with carbon fiber - the shop won't get sick... ha ha
looks great
Awesome ✈️