Hi Pete. I completely understand about your wet weather. Nice machine. It nice to see back in the woods. Have a good weekend Pete & Lauren. 🥰🙂😉👍❤️💜🙏🏻🙏🏻🙏🏻🙏🏻🌳
Hi Pete: Congratulations on the new machine. I switched from hand cutting to a harvester/ processor this year. A BIG change, that’s for sure. Be Safe out there.
Great work Pete and I like that your getting back to work with something that will make cutting tree's down a lot easier, especially on you're body. Take care and I'll keep sending prayers your way.❤❤❤❤
Congratulations on the purchase! You will make the best from a bad situation Pete!! One day at a time! Prayers for you and Lauren keep pushing forward!
Question: Now can you take full tree to the landing. Chip the tops and sell trailer load of chips to paper mill? I believe they do that here in upstate NY. Queensbury area.
Pete, you’ll get to hangover my old boss used to have one of the Ryan Tanglehead the first one and we used to demo it. It was like a prototype and he could cut enough trees to keep the grapple skater and a cable skater busy cutting and topping with a 200 excavator.
Some times the better timing for you is not the better timing of the world. I broke my leg a few years back and it pushed me into some better equipment and more grapples. It was a push but it was good moves. Like wise my buddy just bought a spider lift for the tree work we do and it’s expensive but we have the work for it and an aging crew that has a hard time climbing every day anymore. Congratulations good to see things moving forward for you!
Glad to see you out there with a good looking machine and that dangle head. Will be joining the danglemaster the "Stump" man himself. I love to watch hand cutting, but you are lot safer in a machine. Nick, North West Farmer (Oregon)
Just glad to see you out there doing your thing and making timber dollars ✊️👍and i know it sucks to have to switch from hand to machine cutting but its way faster and safer so from that point of view it had to be done. And there is always need for heavy equipment operator's out there in the world so your golden man.
Good for you nuts never a good time just some times are better than others you will do good you work hard for everything you have and after everything you have been through it’s obvious you ain’t no quitter good luck with that beast
In business there is seldom a good time to make an investment but there are times to bite the bullet and take the chance. With your accident and recovery, you should be proud of the fact that you are able to get back in the woods and back to work...🙏🏻🙏🏻🙏🏻👍🏼
I know what you mean buddy when you say it's scary times I've been cutting for 22 years climbing Dragon hauling you name it I'm 41 right now I've been working for the company I've been working for as the foreman for the last 17 years I was supposed to take over in the next year year and a half and I am terrified terrified because if prices don't go down people are going to pay their bills before they get tree work done if I take this company over I am terrified something's going to happen and it's going to go under this has been a dream of mine for a long long time but it's such scary times out there and makes me think should I do it I don't know God bless you brother stay safe God Is With Us Always and will always guide us
Have faith , everything will work it's self out . There is always tree work out there . Most is not willing to work that hard, it's a difficult dirty job only the hardest men want to do it .
@@jameswilson322 I know buddy like I said I've been cutting climbing for 22 years I started when I was 18 I'm 41 now and we have a hard time the last 7 years finding guys to even show up so this all makes me nervous about taking over the company thank you for your comment God bless brother stay safe
I know bugger all about anything you do, Pete. I do know you liked a certain bar and chain on your saw. Can this beast accept custom parts, too? Now, I'm a retired pen pusher, so forgive my ignorance. Should the blade be faster than that or are you keeping it a bit slower until you get used to it? I am really happy you got your hands on good gear. When it's cold, or too hot, you will be safe in the Kobelco.
I wouldn't worry too much about what people say. You have to take things slow with new equipment, hydraulics have their own personalities and you have to get used to it, let alone moving to something you haven't run.
Awesome job. Congratulations on your new machine. Glad to see you back in the woods again. Stay safe and enjoy.
Hi Pete. I completely understand about your wet weather. Nice machine. It nice to see back in the woods. Have a good weekend Pete & Lauren. 🥰🙂😉👍❤️💜🙏🏻🙏🏻🙏🏻🙏🏻🌳
Awesome machine! That has to be a big adjustment. Great job. It will come together. I'm glad to see you! Thanks for sharing!
Hi Pete: Congratulations on the new machine. I switched from hand cutting to a harvester/ processor this year. A BIG change, that’s for sure. Be Safe out there.
Great work Pete and I like that your getting back to work with something that will make cutting tree's down a lot easier, especially on you're body. Take care and I'll keep sending prayers your way.❤❤❤❤
Congratulations on the purchase! You will make the best from a bad situation Pete!! One day at a time! Prayers for you and Lauren keep pushing forward!
Congrats Pete! And I'm so happy to see you in the woods doing what you love.
I thought we were getting a bigger boat,Captain???🤠
Maybe next year!! Congratulations, Pete! Real nice set up!👍👍
I got another one yes but a smaller boat lol
@nuts319 In a couple more weeks ...You will be able to cast a bait caster with this machine setup!!👍
Fantastic Looks like the learning curve was quick. Best part is no ticks no snakes and you’re in the AC 👊
Good luck with your new machine and glad your inside a cab and a little safer!!
Nice machine buddy. I’m sure it will do you well. Thanks for the ride along.
Congratulations on your new machine, Pete. You deserve it. Best wishes.
Bill
Nice looking machine Pete, won't get no poison ivy cutting timber with her lol. Cheers and take care
What you said!
That’s awesome brother. My buddy has a 2017 170. Great machine. Rock and roll!!!!!
Question: Now can you take full tree to the landing. Chip the tops and sell trailer load of chips to paper mill? I believe they do that here in upstate NY. Queensbury area.
No market for chips here
Once you get the hang of it, you’re gonna love it! I’ve got a Ryan’s 28 on a deere 210g and it’s awesome.
Nice machine Pete You deserve it You're a hard worker God bless keep on keeping on Stay safe
Awesome machine nutsey , can't wait to see what you do with it . TALK ABOUT GRABING THE BULL BY THE HORNS .
Same bull that bucked him off. Nutsy made that bull a steer!
Pete, you’ll get to hangover my old boss used to have one of the Ryan Tanglehead the first one and we used to demo it. It was like a prototype and he could cut enough trees to keep the grapple skater and a cable skater busy cutting and topping with a 200 excavator.
Congratulations on your new machine Pete great to see you back again stay safe watching from Ireland
So good to see you back in the woods. The new machine looks amazing!!
What a machine. I knew things like that existed but it's nice to see it in practice. Glad to see you back at it!
You run it like you have run one for years, your a natural 👍👊🇺🇲🇺🇲🇺🇲
Nuts I have never been around one nor ran one but I think you done a heck of a job
Congratulations🎉Pete..May God Bless You and Your New Machine.
that is one awesome machine. Congrats Pete!
Nice Machine Pete those kobelcos run pretty good. Goodluck with her .
Looking good brother glad your up snd moving congrats on your purchase
Awesome Pete!
Looks to me like you have the swing of it just fine!
Congratulations Pete!! You’ll get the hang of that beast before long. Great to see you up and about. You’ve been working hard. Great job.
Dam kobelco nice machine should do you well next week and this weekend supposed to warm up nice and not much rain
Some times the better timing for you is not the better timing of the world. I broke my leg a few years back and it pushed me into some better equipment and more grapples. It was a push but it was good moves. Like wise my buddy just bought a spider lift for the tree work we do and it’s expensive but we have the work for it and an aging crew that has a hard time climbing every day anymore. Congratulations good to see things moving forward for you!
Very nice piece of machinery thank you for the video
Smart move and one you needed to do, good not waiting any longer. God Bless
Congratulations on the new machine looks like a great setup 👍🏻👍🏻👍🏻
The more you run it the faster you'll get. Great job and looked like you were having fun with your new toy.
Glad to see you out there with a good looking machine and that dangle head. Will be joining the danglemaster the "Stump" man himself. I love to watch hand cutting, but you are lot safer in a machine. Nick, North West Farmer (Oregon)
Just glad to see you out there doing your thing and making timber dollars ✊️👍and i know it sucks to have to switch from hand to machine cutting but its way faster and safer so from that point of view it had to be done.
And there is always need for heavy equipment operator's out there in the world so your golden man.
Congrats on the new machine. Hope is make life a little easier for Sir and is a productive
Nice ! Kobelco looks in nice shape
Good to see u back at it, nice machine. Congrats
I'm sure Pete you will get up to speed in no time, glad you have bough it.
Congratulations on the new beast.. keep looking forward!!
Nice! I've been thinking about one of these for a while now. I'll be tuning in to see updates.
Great video buddy still sending prayers for you 🙏 glad you are back at it again 👍
That thing is awesome! You can F some serious stuff up with that thing. Congrats
Good job and video Brother. Good to see you back in the woods getting after it, but be safe
Looks like the vines are a PITA. Good to see you back to work. Seen you on Mark and Eddy's videos. You look good.
hi there doing real good for a new machine , best to all john
Congrats man very exciting news game changer right there .. I'll tell ya I miss logging so bad it drives me insane lay in there big man
You’ll come back to it
That a tad bit safer bub !!!
I can't believe anyone would go hard on you knowing what you've gone threw man.just keep on giving er hell.
Congratulations you need that machine.
Good for you nuts never a good time just some times are better than others you will do good you work hard for everything you have and after everything you have been through it’s obvious you ain’t no quitter good luck with that beast
You got it Pete 👍 💪 Say goodbye to poison ivy 😅
Congratulations on your new purchase
Hey Pete! Very smart decision, I for one won't worry so much about your safety!
Hell yeah. Awesome buddy👍
Nice work Pete!
In business there is seldom a good time to make an investment but there are times to bite the bullet and take the chance. With your accident and recovery, you should be proud of the fact that you are able to get back in the woods and back to work...🙏🏻🙏🏻🙏🏻👍🏼
Great idea Pete. Have to stay safe and make it easier for yourself
Congratulations! You will be more successful than ever now. Rise from the ashes!
Definitely a learning curve there Pete , you will master it no doubt
You will catch on in no time at all
BTW it's good to see you back in the saddle again and doing what you love to do. 🎉😊😊😊
Nice machine Pete, will make your job easier and safer.
Congratulations brother!
Pete… that looks like fun!
Congrats!!!
#1 Good to see you're steel protected and diesel powered.
#2 Don't worry, you'll still get to scratch that hand cutting itch periodically.
stick with it you will get better GOD BLESS
Does the claw tell you what the diameter of the log is where you grasp it? I saw that on a machine once but fuzzy memory on which kind.
No
Awesome job!!! Glad to see you back.
Good to see you back. Congrats on the new machine. You gonna be paul bunyan show this year?
Oh boy!!!!! 😂 😂
I know what you mean buddy when you say it's scary times I've been cutting for 22 years climbing Dragon hauling you name it I'm 41 right now I've been working for the company I've been working for as the foreman for the last 17 years I was supposed to take over in the next year year and a half and I am terrified terrified because if prices don't go down people are going to pay their bills before they get tree work done if I take this company over I am terrified something's going to happen and it's going to go under this has been a dream of mine for a long long time but it's such scary times out there and makes me think should I do it I don't know God bless you brother stay safe God Is With Us Always and will always guide us
Have faith , everything will work it's self out . There is always tree work out there . Most is not willing to work that hard, it's a difficult dirty job only the hardest men want to do it .
@@jameswilson322 I know buddy like I said I've been cutting climbing for 22 years I started when I was 18 I'm 41 now and we have a hard time the last 7 years finding guys to even show up so this all makes me nervous about taking over the company thank you for your comment God bless brother stay safe
Take us with you! We want to go! Thanks in advance!
Thanks for the video!
Let me know how you like the machine.. I’m thinking about doing the same setup
peat its nice to see you back here now please take it easy and believe in the power of the lord
Can you make it sound like a 2 stroker !!! lol 😂 looking man stay safe!!!
Bet that's heavy! Nice video
Great to see you improving 👍👍👍
I know bugger all about anything you do, Pete. I do know you liked a certain bar and chain on your saw. Can this beast accept custom parts, too?
Now, I'm a retired pen pusher, so forgive my ignorance. Should the blade be faster than that or are you keeping it a bit slower until you get used to it?
I am really happy you got your hands on good gear. When it's cold, or too hot, you will be safe in the Kobelco.
That’s about all the faster I want it to cut for now
Are you going to hang on to the fellerbuncher, or is this another tool in the fleet?
I’m keepin it for now
Congrats buddy nice machine
You’ll have this sorted in no time.
Just keep pushing😀
Nice new toy , you getting rid of the wheeled cutter ? Or has it been gone for a while .
Still got it
Congradulations you have earned this many times over
congratulations that's a nice looking machine
Thanks odie
Who's the new guy 😂 jk. Nice looking machine and the right way to go. Alot going on to figure out.
Looks like your catching on pretty quick. Nice not to be hand cutting those vine covered trees.
Didn’t look so bad to me. That’s a big machine
CONGRATULATIONS!
There ya go!! 👍
Congrats couldn't be for a better man
I wouldn't worry too much about what people say. You have to take things slow with new equipment, hydraulics have their own personalities and you have to get used to it, let alone moving to something you haven't run.
Good for you. Are you going to keep the Tiger Cat?
Yes
i am happy for ya buddy.
Im almost 2 not be able to hand cut any more 😢😢
Now yer takin boyo !!!
Like you didn't know. 😅😊