And sticking your hands in the hopper trying to hold advancing rocks back as it's running. And trying to move it/get it unstuck while standing on a pile of rocks behind and having it roll back. One literal slip-up off those rocks and it could have easily rolled back on him. In the long run, that little machine is an accident waiting to happen if Andrew keeps it. A larger machine is more stable, easier to move (read as, safer), and could handle more rock easier (again, safer).
I am getting concerned that Andrew is drawing ever closer to getting a serious injury. I'm the same age as him and you can't keep doing the things he does forever.
Honestly... it doesn't draw you in so it still seems one of the less sketchy things he's done if you ask me. I fully trust him to not get hurt as long as he's paying attention, I just hope there won't be a day when he's a little bit off his game...
@@rider573 I was thinking he would be setting up a ramp to drive it off the pallet without tipping it. Next thing he does is tip it over. Sitting on the machine while it is running? If he does stupid things all the time, how is he still alive? How does he still have all his limbs? If he is that lucky, he should buy a lottery ticket.
Did you not know that there are radioactive elements of thorium, uranium, etc. in the stone, they create a radiation background! Especially if they lay for hundreds or thousands of years, as in these mountains!
Andrew has such nice material there. Almost driveway ready even without the crusher... I wonder how this machine would fare on some new england granite.
I just took off like 3 tuck loads of old busted cinder blocks this thing would have saved me a lot of time and I could have used the powder/crushed cinder blocks for filling holes.
Watched you build and finish the garage...it looks great next to the Castle Camarata....and great job showing that a brand new machine is not always "ready for work" 🍻
its only got a 14 HP engine in it. Probably to reduce the chance of something breaking. Some times machines are under powered because more power causes parts to fail.
hey Andrew, I used to work in an aggregate mine that ran jaw crushers, and we had one of the largest ones in our company. the jaws on that mini one don't look like they're any sort of special material, maybe cast steel. you should most definitely be wary in that sense because with harder rocks (granite, etc.) are prone to shooting back out of the jaws. one thing we do to minimize that chance as much as possible, is our jaw plates are chrome steel-structured and manganese-faced. if you're looking into keeping that unit long-term (which I wouldn't recommend, by the way. it's laughably undersized) is to definitely look into those types of jaw plates for your own safety, others' safety, and the longevity of your crusher
That machine doesnt have longevity designed into it anywhere for Andrews work ethic, about 3-4 times of moving it and having to push it around it will probably be pinched up in a bucket😂, maybe the larger one will have more power and move effortlessly.
That is incredibly neat. I've seen those super cheap little AliBaba imported Chinese jaw crushers and they apparently work pretty good but this is on a different level, would be pretty ideal for a small property owner. "Survived testing by Andrew Camarata" should be some sort of industry certification at this point
"Fisher price my first crusher" Nice little piece of equipment, Andrew. Great for DIY garden renovation jobs where paving slabs need recycling for hardcore to make a slab or Pathway. Small enough to get through a side gate or doorway and small enough to position by the sofa at Christmas to crush your walnuts
Looks like it would work perfect for someone to just own for home driveway maintenance! If andrew gives it the "Should have a bigger motor/gear reduction" But give the thumbs up afterwards.. Im sold :P
This thing reminds me of the elephant and the streaker. Elephant said to the streaker, "it's cute but can it pick up peanuts"! For what it's worth, it's probably cheaper and easier to have a few loads of what this thing produces and have it delivered! Looking forward to your next videos! Marc: Edmonton Alberta Canada.
that's why I have watched everyone one of his videos since he started with a little ford tractor i don't even know how many years it has been now lol, the time does fly by, his content is my favorite of all the interwebs
Well, he does a little bit sometimes in a few videos, but I agree, it is nice that he isn't like a lot of other YTber's who spend more time yapping about what they are going to do than actually doing it which is annoying!
Too many channels ( my opinion) exist for sole purpose of their insatiable need for an audience for nearly every facet of their life. This ego trip, so many of today's people appears to be be of epidemic proportions. Not "me too", but me, number ONE.
Yes Andrew I think the bigger crusher would make a major difference for what you need it for. Also the garage is looking great you must be happy with all your toys being all closed in, great job as always bud.
Well done for greasing the machine before you started to use it. I noticed that the lower end of the conveyor belt was getting a build up of material underneath it which will in the long run cause excessive wear,and the exhaust fumes were a bit much when it was overloaded ,Apart from that it seems okay, I would say that it is more suited to crushing building rubble 👍🏻🏴
This will be cool if this guy gives you machines to demo. I know I appreciate you showing us the latest stuff out there. I had no idea they had these little baby plate crushers. There's probably a lot of other stuff I don't know about too. Can't think of a better guy to show it to us. Bring it on.
Man... I'm really amazed that you kept calm all this time when stalling or jamming... Engine smoked too much and it's going to need oil refill after a couple of days... When I saw the first mini crawler I said ok it's suits for the job, but as the Toyota came to play, it was a small crasher and as the beast crawler came to play... it's a tiny tiny little crasher for all that job!!
Had to hand feed it, tracks couldn’t move its own weight, moved to a lighter material and still had a tough time… gotta give this one a fail! Thanks for the demo!
Dear Mr. Camarata. 👍👌👏 You are absolutely right! This crusher needs a more powerful engine or to be geared down for having more torque. Also for the driving unit (it's a joke). This machine might work well on site. For instance if a farmer has a lot of stones/rocks in/on his fields/pastures. Thanks a lot for making teaching explaining recording editing uploading and sharing. Best regards luck and health in particular.
Small rock crusher. Perfect at what it is designed to do - small scale crushing of small rock. But the one thing we love about Mr Camerata is he's not afraid to push the envelope when testing equipment. Some of those rocks were maybe a tad too large for the crusher!
Thanks for giving me an excuse to knock off work early today....lol. I've been standing on a Toro Mini skid steer for 7 hours straight digging and hauling topsoil for a Japanese Wabi-Sabi Garden.
Thanks for sharing. I get the uses but just buying the stone would be cheaper. This is especially true with parts quality and availability. It was fun to watch.
I mean... it's a rubbish design that doesn't make an iota of sense. Who'd even need a crusher that narrow gauged? Is it for mine operators in the 19th century, operating rock crushers inside coffin levels? It's stupid and top heavy, should've had bigger and wider tracks. For once, it's not his fault.
Andrew get you a lock n lube attachment for your grease gun. Seeing you fight with removing the hose reminded me of how much I love my lock n lube fittings. Easy on and easy off.
5:43 Brand new its never been greased’ It’s tracked over 2 metres and 1.5 meters of that was on its front idler at an ungodly angle so technically speaking she’s second hand Andrew 😂👍🏼 Quality intro 👏🏻👏🏻👏🏻 You were clearly overloading that little engine Andrew perhaps only fill half the skip before putting the next bucket in might help. Also perhaps invest or make a riddle bucket for this machine so less fines / contamination go through into the finished product 👍🏼
This looks neat. Gold rock miners have some this size and they get it like under the feet and wheels in your yard. Keep wood out won't crush. Jams. likely twigs ok. leaves ok.
I can see this being super handy for very specific odd jobs or tight spaces. But it's tendency to clog probably justifies just getting a little bit bigger of a crusher.
Can see how that little machine could be useful on offsite gigs. Small enough to trailer around and still have room for mini-ex. Very Interesting. Perfect for small DYI crushing operations.
Man is this a parody show of some sorts. All these little snafus. Man is the ultimate stoic. Everything he sees; he touches, looks at, into and already has re-engineered to work better. Amsr too, like on the job… high on the couch😊 Great video, if ya just started thinking, could I do that? No upgrades
Great video Andrew! I wish you could have heard me yelling NO Don’t Do It when you tried to take it off the pallet….Haha! I think the belts are way too loose is why it keeps jamming. It probably has to be something you have to get the feel of to run smoothly. Thanks
The enclosed garage looks great .
Bro has leveled up for sure, real fine like.
I thought for a minute Andrew put a power operator n the roll up door! :But nope (good) the stock operators on it are just smooth! :)
@@MikeBaxterABC I think Andrew opted for the chains instead of a power motor is because it's a great way for him to keep in shape.
The enclosed garage is way better then the old
He is becoming the Westin diesel of work equipment 🙌🙌🙌
Sitting inside the hopper of a rock crusher AS IT IS RUNNING is definitely one of the sketchier things Andrew has done.
And sticking your hands in the hopper trying to hold advancing rocks back as it's running.
And trying to move it/get it unstuck while standing on a pile of rocks behind and having it roll back. One literal slip-up off those rocks and it could have easily rolled back on him.
In the long run, that little machine is an accident waiting to happen if Andrew keeps it. A larger machine is more stable, easier to move (read as, safer), and could handle more rock easier (again, safer).
And almost rolling it over off the pallet 0.5 seconds after starting.
I am getting concerned that Andrew is drawing ever closer to getting a serious injury. I'm the same age as him and you can't keep doing the things he does forever.
Honestly... it doesn't draw you in so it still seems one of the less sketchy things he's done if you ask me. I fully trust him to not get hurt as long as he's paying attention, I just hope there won't be a day when he's a little bit off his game...
@@rider573 I was thinking he would be setting up a ramp to drive it off the pallet without tipping it.
Next thing he does is tip it over.
Sitting on the machine while it is running? If he does stupid things all the time, how is he still alive?
How does he still have all his limbs?
If he is that lucky, he should buy a lottery ticket.
I believe the last scene should be it trying to get on the trailer to take it back. Thank you for showing us this machine.
This thing comes from China. If you ask to bring it back you will get in for free.
I believe the last scene for this piece of crap is driving it off the driveway with the car he did that too!! lol it's a toy
Great. Really impressed with your thoroughness in lubing and checking levels on a brand new machine
3 minutes in, and we are already rewarded with those actions, only Andrew could give us! Thanks man :)
Absolutely!
The pause and the look, Did I just buy this thing was great 😂
@@kwmiked he didn't buy it, he was testing it
and then some times he wonder why this broke for no reason
Don't do that. 😂
No instruction manuals were read or harmed in the production of this video 🤣 Andrew, please never change, you are perfect 👍
Yep, funny how it tracked without the crusher mechanism engaged. Shame about the sparks flying out of the clutch, though.
what manuals, it's written all in chinese
Instruction for 1 Startbutton and 3 Valves🤣🤣🤣
I especially love the fact that he touched the grounded frame with the positive then he said "Don't do that" HAHAHAHAHA!!
Did you not know that there are radioactive elements of thorium, uranium, etc. in the stone, they create a radiation background! Especially if they lay for hundreds or thousands of years, as in these mountains!
Awesome and outstanding as always.Thanks for sharing and taking us along
Andrew has such nice material there. Almost driveway ready even without the crusher... I wonder how this machine would fare on some new england granite.
Seller: "This thing is indestructible" Andrew:"Hold my beer"
😆👊⚙️
*drives it a-over-t off the pallet
Andrew, this mini crusher is definatly to small for your business. It`s a toy for a owner of a back yard. The right size is up in the hill ! 😁
Agreed
Or used as a second stage, fed by his big crusher.
I just took off like 3 tuck loads of old busted cinder blocks this thing would have saved me a lot of time and I could have used the powder/crushed cinder blocks for filling holes.
This “crusher” is a joke. What a pos. 😂
I thought it might be good for a small hobby type gold prospecting mine! .. would't take too much gold to pay back??
I still can't get over the fact of how nice your garage looks. It's too nice to call it a shed, by a mile.
Andrew, thanks for the video. Always love your videos, I'll be waiting for the next. Be Safe, and God Bless!
Something good to watch on a boring afternoon. Thanks Andrew
You’re welcome
@@AndrewCamarata i thought you were going too rename it,the shale master 2000.
hello @@AndrewCamaratawhat excavator can you hear running in the background when the mini rock crusher engine shuts down
@@FinnMikazuki3 The little yellow in behind.
Hello@@KupaTuskathe big orange excavator is the excavator running in the background when the mini rock engine shuts down
Best channel on all of youtube right here... 10/10
Nah jesse muller or diesel creek are better
It's 9/10 without Sammy though.
Those are both basically Camarata spin offs lol
I love Jesse also but Andrew is king@@FrassoFra
@@CerebralAilment i cannot agree with you
“Instantly knocks it over” “Don’t do that”
Watched you build and finish the garage...it looks great next to the Castle Camarata....and great job showing that a brand new machine is not always "ready for work" 🍻
I always was proud how much my Landrover series 2 diesel smokes under load. But this piece of chinesium is master in blowing smoke.
It gives a whole new meaning to the phrase “rolling coal”. 😂
'rorring coarr'
she was a huffin and a puffin, do dpf seen in sight lol
its only got a 14 HP engine in it. Probably to reduce the chance of something breaking. Some times machines are under powered because more power causes parts to fail.
Don't think that little engine will last many hours, you know it's as cheap as possible.
hey Andrew, I used to work in an aggregate mine that ran jaw crushers, and we had one of the largest ones in our company. the jaws on that mini one don't look like they're any sort of special material, maybe cast steel. you should most definitely be wary in that sense because with harder rocks (granite, etc.) are prone to shooting back out of the jaws. one thing we do to minimize that chance as much as possible, is our jaw plates are chrome steel-structured and manganese-faced. if you're looking into keeping that unit long-term (which I wouldn't recommend, by the way. it's laughably undersized) is to definitely look into those types of jaw plates for your own safety, others' safety, and the longevity of your crusher
this one is actually a good size for walnuts at christmas time
That machine doesnt have longevity designed into it anywhere for Andrews work ethic, about 3-4 times of moving it and having to push it around it will probably be pinched up in a bucket😂, maybe the larger one will have more power and move effortlessly.
@@young11984 yea i know - the walnut crusher thing for Christmas time is a joke
FYI: From upsen specs: "The jaw plate is made of high manganese 18"
If it was cast steel it would broke already.
I used to help replace the 10K lb jaw dies on large primary crushers.
That is incredibly neat. I've seen those super cheap little AliBaba imported Chinese jaw crushers and they apparently work pretty good but this is on a different level, would be pretty ideal for a small property owner.
"Survived testing by Andrew Camarata" should be some sort of industry certification at this point
It is a cute toy but given the effort and time I am sure you can get granular a delivered cheaper
Testing a mini rock crusher...The enclosed garage looks great .❤👌👌✔✔🚂
"Fisher price my first crusher"
Nice little piece of equipment, Andrew. Great for DIY garden renovation jobs where paving slabs need recycling for hardcore to make a slab or Pathway.
Small enough to get through a side gate or doorway and small enough to position by the sofa at Christmas to crush your walnuts
Mine was a Tonka! Got you beat.
Lol .. My first thought as it's be nice for a small gold prospecting mine !
@@MikeBaxterABC Yeah actually, would be a brilliant addition to a small gold operation. Good thinking!
That stone block effect on the workshop looks mint
Yeah, that turned out really nice!
Man, I sure do love watching your videos. ♥️👍🙂
Thank you sir for creating these videos!
When Andrew says "don't do that" you should probably listen.
Agreed!
Same when he says: "I have the feeling, if i keep going, stuff is gonna fall on me." XD
That would be great for old cinder blocks and bricks.
This is actually a great idea. Crush it up into road base or fill!
Damn thing choked on a leaf, AC tossed it a peddle, it broke down, really this thing should be taken to recycling for turning into lawnmower blades...
17:26 my favorite ASMR
😁
Me too
Only on these vlogs will one learn the limits of a piece of machinery. No one does it like you mate. Cheers !!
That thing is giving off Gonk Droid vibes. Love it.
Exactly what I was thinking lmao
Dude. The unloading made this your best video in a while.
love how Andrew checks all the fluids and greases nice work sir
Awesome guys ❤
Good luck with your work
Must've been quite a salesman to even get you to test it😂
I bet he could sell a ketchup popsicle to a woman in white gloves!
That mini rock crusher looks like one of those square power droids that go “Gonk!” on Star Wars! So funny!
I immediately searched the comments for "Gonk". Was not disappointed. lol!
Oh yeah... I thought I recognized him from somewhere!
Traductor a Español
Nope, That machine is the brother of Bender Bending Rodríguez & great grand son of one of the robots in Silent running!
Thanks for the upload Andrew
Looks like it would work perfect for someone to just own for home driveway maintenance! If andrew gives it the "Should have a bigger motor/gear reduction" But give the thumbs up afterwards.. Im sold :P
This thing reminds me of the elephant and the streaker.
Elephant said to the streaker, "it's cute but can it pick up peanuts"!
For what it's worth, it's probably cheaper and easier to have a few loads of what this thing produces and have it delivered!
Looking forward to your next videos!
Marc: Edmonton Alberta Canada.
The best use of this is driveways and backyards where the only access is a small path and getting rock delivered is impractical.
But getting it delivered doesn't clear the property of the larger rocks. He is accomplishing two for one.
Loading that little thing with your Hitachi is hysterical 😆
I would be able to load it quicker using chop sticks.
I love it. A mini excavator for a mini rock crusher. Andrew you are great.
Garage looks awesome 😎
That thing smokes like a cruise ship lol
Could have bought all of your production for 75 dollars, quit
Playing with this toy. and buy
Two more sizes up, save your time for better work!
Maybe it also runs on bunker oil
lmao
was made in china
I really like that this guy does not talk, as many are doing, he shows the job
that's why I have watched everyone one of his videos since he started with a little ford tractor i don't even know how many years it has been now lol, the time does fly by, his content is my favorite of all the interwebs
Well, he does a little bit sometimes in a few videos, but I agree, it is nice that he isn't like a lot of other YTber's who spend more time yapping about what they are going to do than actually doing it which is annoying!
Too many channels ( my opinion) exist for sole purpose of their insatiable need for an audience for nearly every facet of their life. This ego trip, so many of today's people appears to be be of epidemic proportions. Not "me too", but me, number ONE.
@@johndowe7003 Well put
I would be very interested in seeing the bigger one. Good job on the video for this one.
Yes Andrew I think the bigger crusher would make a major difference for what you need it for. Also the garage is looking great you must be happy with all your toys being all closed in, great job as always bud.
Well done for greasing the machine before you started to use it. I noticed that the lower end of the conveyor belt was getting a build up of material underneath it which will in the long run cause excessive wear,and the exhaust fumes were a bit much when it was overloaded ,Apart from that it seems okay, I would say that it is more suited to crushing building rubble 👍🏻🏴
This will be cool if this guy gives you machines to demo. I know I appreciate you showing us the latest stuff out there. I had no idea they had these little baby plate crushers. There's probably a lot of other stuff I don't know about too. Can't think of a better guy to show it to us. Bring it on.
I went and brought a mini excavator after watching Andrew and it’s a great help.
Wow Andy!! You have your own quarry!!
Thanks brother for the great content. Plz keep it comming
Cody keeps looking like Levi, great video and yeah that machine is doing its work.
Really enjoy your videos. Your new shop is perfect.
Man... I'm really amazed that you kept calm all this time when stalling or jamming... Engine smoked too much and it's going to need oil refill after a couple of days... When I saw the first mini crawler I said ok it's suits for the job, but as the Toyota came to play, it was a small crasher and as the beast crawler came to play... it's a tiny tiny little crasher for all that job!!
Had to hand feed it, tracks couldn’t move its own weight, moved to a lighter material and still had a tough time… gotta give this one a fail! Thanks for the demo!
Mini equipment for mini jobs! I like the size of the material.
I got freaked out when Andrew sat atop rock crusher bin, while the machine was running!!! Andrew, don't be foolhardy! Accidents do happen!
Ya!
This. That was not needed.
Stop worrying. The engine would just quit.
It woulda just bogged down and stalled when it got up to Andrews brass balls anyways... lol
Love ya bro. Be careful. You're still young and we are looking forward to you making another million videos 🙂🤠
I love the rock crushing/road work videos. I've watched the 3 hour one twice
kudos for showing that pallet dive- i was thinking that could happen
Thanks for keeping it real, your authenticity is refreshing
So nice of Harley Davidson to lend you their latest machine, just a shame they're still all noise and no power!
Makes you wonder why HD still sells so any of them. 🤔
@@DanKoning777 Marketing is a hell of a drug.
@@DanKoning777Because midlife crises and fragile masculinity are a thing.
For a T shirt company they sell a lot of bikes
Cool little machine and very useful if you manage what you are crushing; I can see it being very useful to you.
Dear Mr. Camarata.
👍👌👏 You are absolutely right! This crusher needs a more powerful engine or to be geared down for having more torque. Also for the driving unit (it's a joke). This machine might work well on site. For instance if a farmer has a lot of stones/rocks in/on his fields/pastures.
Thanks a lot for making teaching explaining recording editing uploading and sharing.
Best regards luck and health in particular.
Props for showing the accidents as well.
Camarata is quality viewing !!!!
Content, skill, knowledge & confidence are awesome !!!
Andrew is the best period! All 3 are pretty smart cookies!
That is adorable! Goes great with the Briggs and Stratton mini excavator
Love the setup like the fact that you get things that would be useful for top dressing a drive with smaller crush
I personally would choose the larger one .Thanks for sharing
he has a larger one - a much larger one
@4PeTe2 I know he wants to try one a little bit bigger than the one he used on the video .
How cute. It’s like watching him play with toys. lol
Love the vids Andrew. Been watching since the castle build
Small rock crusher. Perfect at what it is designed to do - small scale crushing of small rock. But the one thing we love about Mr Camerata is he's not afraid to push the envelope when testing equipment. Some of those rocks were maybe a tad too large for the crusher!
If they fit in the chut there game
I love work. Can watch it all day 💪🏻
Thanks for giving me an excuse to knock off work early today....lol. I've been standing on a Toro Mini skid steer for 7 hours straight digging and hauling topsoil for a Japanese Wabi-Sabi Garden.
I admire your patience Andrew.
That was perfect Rock crushing music!
Everyone should have one of these. For around the yard, fixing up your driveway, etc. Awesome piece of machinery.
i would not call this toy awesome. cute maybe
It's a hire by the day toy. I would not waste money buying this.
Andrews channel is up there with the best of them. Change my mind 😊
Looks like the machine works good. It is small for the amount of work you do. Great stuff.
Thanks for sharing. I get the uses but just buying the stone would be cheaper. This is especially true with parts quality and availability. It was fun to watch.
The oil bath air filter is a good call on a rock crusher. You don't see those too much anymore.
3 minutes in he already flipped it. classic Andrew
And instant restart even the oil has gone into places where it normally doesn’t 😊
I mean... it's a rubbish design that doesn't make an iota of sense. Who'd even need a crusher that narrow gauged? Is it for mine operators in the 19th century, operating rock crushers inside coffin levels? It's stupid and top heavy, should've had bigger and wider tracks.
For once, it's not his fault.
I have to say, I love the new garage
Andrew get you a lock n lube attachment for your grease gun. Seeing you fight with removing the hose reminded me of how much I love my lock n lube fittings. Easy on and easy off.
100%
We can always count on you, Andrew to provide a "real world" - no punches pulled, review of these products before we slap down our hard-earned cash.
Andrew has the suitable toy for each job! Good for him!
out of that shale you are getting incredible road/drriveway base
Its not the first time I see that you do not know that awesome invention from Mr. Shovel👌
That little motor is fighting for its life😅
5:43 Brand new its never been greased’
It’s tracked over 2 metres and 1.5 meters of that was on its front idler at an ungodly angle so technically speaking she’s second hand Andrew 😂👍🏼
Quality intro 👏🏻👏🏻👏🏻
You were clearly overloading that little engine Andrew perhaps only fill half the skip before putting the next bucket in might help.
Also perhaps invest or make a riddle bucket for this machine so less fines / contamination go through into the finished product 👍🏼
The concept is great, scale up a couple of models and that will suit your purpose. Thought provoking. Your place has come a long way. Very nice.
This looks neat. Gold rock miners have some this size and they get it like under the feet and wheels in your yard. Keep wood out won't crush. Jams. likely twigs ok. leaves ok.
I can see this being super handy for very specific odd jobs or tight spaces. But it's tendency to clog probably justifies just getting a little bit bigger of a crusher.
I'm saving this for after work tonight, Thanks Andrew.
glad Andrew has the patience I would have had it back on the pallet by now.
Can see how that little machine could be useful on offsite gigs. Small enough to trailer around and still have room for mini-ex. Very Interesting. Perfect for small DYI crushing operations.
AWESOME!.... AWESOME STORGE GARAGES NOW GOOD JOB ANDREW!!!!
the chrushermotor WANTS a turbocharger...😉
I liked this video and look forward to seeing the slightly bigger and LONGER video of it :) Cody is looking a lot like Levi
I died laughing when he got into the hopper and started it back up.
Stay safe out there man.
Man is this a parody show of some sorts. All these little snafus. Man is the ultimate stoic. Everything he sees; he touches, looks at, into and already has re-engineered to work better. Amsr too, like on the job… high on the couch😊
Great video, if ya just started thinking, could I do that? No upgrades
I just wanna be his dog, that’s one happy beast at the end.
Awesome.
Hello from rocky mid-coast Maine, US Thursday, May 23, 2024......
Definitely a Nice little rock crusher Good video Andrew
Great video Andrew! I wish you could have heard me yelling NO Don’t Do It when you tried to take it off the pallet….Haha! I think the belts are way too loose is why it keeps jamming. It probably has to be something you have to get the feel of to run smoothly. Thanks