Table DIY Please take a look here first.
Вставка
- Опубліковано 14 вер 2021
- Subscribe here / diykoubou070707
I made it with Comeri's ingredients.
I made a simple and sturdy low table.
Table of Contents
00:08 Table top processing
01:11 Dubo succession using a jig
05:32 Leg processing with a table saw
06:20 Paste the board and make 4 legs
09:28 Leg processing, wood-worked groove digging
11:24 Temporary assembly
12:11 Leg assembly
15:38 Top plate ditch digging
18:28 Finishing work
Paint Urethane varnish matte amzn.to/3yMliHq
Tools used
Miles Dabojig amzn.to/3FkfSG4
Makita Impact Driver amzn.to/3J2zj8H
Wood used
Home Center Comeri Cafe Board
1820x200x30 1280 yen x 2 bottles
I made it with dowel joints and woodwork that don't use any nails or screws.
I made it with cedar wood left over when I DIYed the sofa. - Навчання та стиль
暖かいコメントありがとう御座います😃
K'sDIYチャンネルさんからコメント頂けて光栄です!!励みになります!
ありがとう御座います!
脚埋め込みは、びびる。すげー
もうdiy レベル超越してますね♪
コメントありがとうございます😊
I love the music as well
thank you! I was very happy to read the comments. It's very touching to know that my music is enjoyable for you. Thank you again for visiting my channel and leaving your comments.
Wow, Beautiful Upload friend. keep it up. Thank you for sharing this to us. Greetings from Korea
thank you! I appreciate your words. I'm glad that you compliment my video. We will continue to do our best to ensure your satisfaction.
ありがとうございます!あなたのお言葉に感謝しています。私のビデオをほめてもらいうれしいです。今後も、満足していただけるよう、最善を尽くします。
Nice work
It is wonderful! I'm very happy that you liked the table. Compliments like this can make you feel like your efforts have been rewarded. I will continue to make videos for your satisfaction.
うーん
スゴい
初見です
シンプルで素敵なテーブルですね
丁寧な仕事に関心しました!
17:31
手間と機械を駆使してこの製品では残念
機械があるとこうなってしまいがちですね
シンプルで木材らしさが味わえる作品が見たい
@appi6213さんアドバイスありがとうございます😊シンプルで木材らしさが味わえる作品を今後意識して作ってみたいと思います!
ご視聴ありがとうございました😊
15:05
なぜトリマーの進行方向をここだけ逆にするのですか?
💁木工ソファーやベンチテーブル再生リストにまとめてみました
ua-cam.com/video/GWdSgiUbB4c/v-deo.html
同じような物を作ろうと思っています。脚の取付けは ホゾ穴とボンドだけでしょうか?使用されて強度の問題は無いですか?
ご視聴ありがとうございます🙇♂️一年経過しましたが今のところホゾ穴とボンドだけで問題ない状態です😀
ホゾ穴の結合は熟練を要すると思いポケットホールを活用して脚を取付けることにします。ご返信ありがとうございました。
カフェ板をダボ繋ぎしたかったんですけど。
やっている人が居なくて諦めてました。
この治具があれば素人でも難しくないですかね?
ご視聴ありがとうございます😊私もDIY素人です🙇♂️この治具を使って穴開けしました
意外と簡単に出来ましたのでおすすめですね👍ガイドが付いてるのでクランプ無しでも
綺麗に仕上がりました😃
クランプを使い板をしっかり固定してするとより精度の高いダボ打ちすることができました。
マイルズクラフト(Milescraft) ジョイントメイト ダボ穴あけ 1369 01:11
返信ありがとうございました🙇♀️
ちょっとお高かったけど購入しました❗️
動画を参考に頑張ってみます✨
はじめまして、仕上げの塗料を教えていただきけないでしょうか?
コメントありがとうございます。
Amazon
和信ペイント 水性ウレタンニス つや消しクリヤー 0.7L 屋内木部用 ウレタン樹脂配合 低臭・速乾 2700円位です!
機械を使わず作って見て下さい?
コメントありがとうございます。手作業を今後増やしていきたいと思います。