How To: Apollo Ghost V3 Upgrade Kit
Вставка
- Опубліковано 2 жов 2024
- In this video, we walk you through the process of how to instal the V3 upgrade kit on to the Apollo Ghost.
JOIN THE COMMUNITY:
/ rideapollo
FOLLOW US:
/ rideapollo
/ rideapollo
/ rideapollo
#rideapollo #apolloscooters #apolloghost
I’d love to be able to add a super powerful headlight to the scooter that could connect to the main battery. The integrated lights on my 2021 model are basically useless.
Agreed :/
Hey Apollo Team,
Got a question on the current Ghost 22 Mach 1 upgrade kit.
I was fortunate enough to have an Apollo service center near me. $100 USD for upgrade installation for those interested.
Will the lights be able to be turned off fully with an update? If not how will this effect the battery life of said scooter?
If battery drains and dies out fully will the warranty cover this issue because of the upgrade?
Can an extended warranty be purchased after purchasing the upgrade kit?
Will a added piece or solution be available for the deck hook once the lcd monitor is installed?
Unfortunately this can be an issue since it’s not lockable and if you want to transport the scooter manually by hand or car you risk a chance of the lcd monitor to crack or break since it’s not secured.
Thanks in advance
I just installed the V3 kit myself on my '22 Ghost. It seems complicated at first but YOU NEED TO TAKE YOUR TIME. Patience goes a long way. If you're technically inclined, you'll actually enjoy the process. I installed everything correctly but still ended up getting an error; "F1" on my screen. After multiple attempts to troubleshoot I realized the Regen module they sent me in the kit was faulty. I emailed support and within a few hours they got back to me and shipped me a new Regen module.
Apollo Support is excellent! When you purchase this scooter, just know that the Canadian company really cares for their customers.
I'll update here once I install the new Regen module and everything works fine.
I recommend re-shooting this video with the production version of this kit. The wiring harness shown and described in this video does not match the production version. I would also recommend a "demo" video of the production version of this kit to show what it is ACTUALLY capable of to perspective buyers.
Hi Andrew,
Thank you for your feedback. We've forwarded your concern to our hardware and video production teams for review. Thanks!
Exactly what I said….. I’ll be coming out with a more in depth review of this thing. Worst purchase of my life
Hi RJ,
Our video production team is looking into this. In the meantime, we recommend booking a live video call with one of our techs as they will be glad to help you with the installation.
To book a call, please go to: widget-hosts.mavenoid.com/apollo-video-support-booking/
Thanks!
@@user-zh9yi2nf3myou never did tho.
I want to say thanks for doing this. No other scooter company would do this for their customers. I am comfortable doing this upgrade myself and just got it in the mail.
Hi Jamie,
Thanks for your feedback! Providing these detailed installation and maintenance videos are certainly important to us as we want to give our customers the best support possible!
If you have any questions regarding your installation, please don't hesitate to reach out :)
UPGRADE 2.0: If your wire colors don't match the controller in the video, you may need this video instead: drive.google.com/file/d/1ed0xwa2gULo6L3uFQlboZO--ERNxonK_/view
forgot the foam on the battery =(
When doing these tutorials please make sure that the information you are relaying matches what was sent to us. The colors of the wires in the video don't match the color odf the wires we recieve!!!! We spend a lot of money on this and literally TAKE APART THE ENTIRE SCOOTER TO TRY TO INSTALL THIS THING AND NOW WERE STUCK WITH NO CUSTOMER SUPPORT AT ALL!
I'm working on it right now.
I've learned the Green Black double connector is the Right Front/Rear Leds.
Blue Black double connector is the Left.
Yellow Black seems to be for the Blue Deck Leds.
What I find weird is the Rear and Front LEDs are always on now. Not sure if that is intentional or not.
Hi RJ,
We're sorry to hear about your issue and we're here to help. Could you please confirm your order number so we can follow up on your ticket?
You can also book a live video call with one of our techs here:
widget-hosts.mavenoid.com/apollo-video-support-booking/
Curious why are you sending out Ghosts with these free upgrade kits? Why not just install it for the consumer? I assume it's something about warranty? Do you give up your right to warranty claim if you do this upgrade?
Hey there, we do offer installation at extra charge in our servicing locations - some of our customers are quite technically inclined and would rather do it themselves. With regards to warranty, incorrect installation does void it - if installed correctly, there's no impact.
@@ApolloScooters how much do you charge? I just quoted one of your customers $250 at my repair shop.
Will I get more range with this upgrade?
Probably, seeing as you'll be using the regen braking throttle for most of ur braking I'd guess we'll get a bit more range.
Am i missing something basic here?? What happened to the key?? Is it not required in the upgrade for some reason? Is there a code the user has to enter on the display or is the Key simply deleted?
I was able to get her done with by 2021 Ghost... Very satisfied. My advice to the serious amateurs (like me) is just take it slow, don't force anything, and watch/pause the video over a few times while you are doing it. A few things that tripped me up:
1) The wires that are doubled with two connectors for the LEDs are two for the left front and back and two for the right front and back. Makes sense once you know... He doesn't do a great job of explaining that and the wire colors don't match the video. As @Josh M7 points out "I've learned the Green Black double connector is the Right Front/Rear Leds." The other pair is for the left.
2) There are other relevant comments here - like don't forget to add the foam protecting the wire on reassemble.
3) I set the scooter on top of a small box for bench testing. It took a while to get the calibration step figured out. You can turn it on just to see that it is working and play around with the controls. Once you do that, turn it off. Now press the power button quickly - then immediately 10 times quickly to get the calibration mode going. If you wait too long after that first press it won't trigger. I was in kickstart mode - so I had to rotate the wheels to get the motors started when I throttled...
4) Reassembly is more of an art than a science, take your time: one step at a time. Good example left up to you is the bell doesn't get discussed... I left it off, but there is probably a position that could work... I did zip tie each connector as was done on the original install from factory. Also that little step on sealing the wiring harness into the deck is important if you want to keep her fairly water tight - i used some black silicone.
Hope that helps!
This definitely helps in regards to the wiring, it is what I was beginning to suspect looking at this, but wasn't sure. I haven't completed installation yet, but I am curious, does this eliminate the brake light activation then since the front and rear lights are now tied together?
@@DrewFromSoDak you mean when you brake the rear lights blink? That still works. Though the front and rear lights are always on now and since the front are on the same wire as the rear, they also blink when breaking.
TL;DR Front and Rear lights blink when breaking now.
Just to add to #2
If you get everything plugged in and the turn signals are not working but rather just flashing either the headlights or brake lights, you can trial and error by turning the scooter off and switching the green/black, with the blue black leads. You will get it eventually
I guess those foam bits covering the wire arent necessary to add back? Because he didn't in the video
I think he forgot lol
the controller is not even bolted/held down properly for best heat transfer?
And the battery isn´t secured from sliding, unless the front is fully stuffed?
They also put the thermalpad on the side that have the heatspreaders. Then we add that the controller isnt even attached. Not even pressed down with at plastic clip or what ever again the bottom so that the thermalpad can transfer the heat. This makes absolutley no sense. Not even the argument that the side with the heatpreaders are touching components internally, and thats why that side is the warmest and needs more cooling. To transfer heat you need contact.
Hi, what about the foam covers for the wires that you emphasised at the beginning that we need to be careful with and not remove fully so we can reuse them. You then didn’t replace them. Can I have a free upgrade kit please? Thanks
Why is this video impossible to find by searching on UA-cam? I have to go through a link you guys provided in a video to find it.
Cool. But certainly won't be attempting the upgrade myself.
Apollo expects the average rider to do this upgrade? Completely unrealistic.
Do u have tips about the battery use for this kind of electric scooter.
I did the install my self. Everything turned on as soon as i plugged in the battery so i turned it off. Turned it back on again (could tell by the deck lights) but the screen was black. Went ahead and pressed the power button 10 times and the calibration started and finished while the screen was black and blank. Off and on again, the lights work, breaklight work but still no screen, the throttle doesn't work, and no turn signals. Hmmm...guess i need to call support.
Hi Garth,
We're sorry to hear about your issue and we're here to help. We suggest booking a live video call with our techs at: widget-hosts.mavenoid.com/apollo-video-support-booking/
Thanks!
Anyone in the Denver area want to install this for me?
Can you still switch from single to dual motor as well as eco mode now that we have removed those buttons?
Hi Scott,
The upgraded will Ghost will only run on dual motor mode. However, the MACH 1 controller is more efficient than the old controller. Additionally, running on dual motor mode will also be more efficient as the 2 motors will share the load and run cooler.
It’s nice to see the new one is way less jank then the old version.
Pretty pricey. Considering the current screen is basically un readable.
Hi epicone,
The upgraded screen that comes with the Ghost Upgrade Kit will be similar to the one in the Phantom V3. This screen is quite bright and is also x2 faster than the Hex display that the Phantom V2s had.
This will certainly be more visible than the older Ghost display :)
5 min in and i already know i am never going to attempt this.
Hi there!
If you are located close to an Apollo Hub or one of our repair partners, you can certainly book an installation service :)
I’m in LA. How much would an install cost?
@@ApolloScooters i'm in victoria bc canada and as far as i can find there is no apollo hub here
@@ApolloScootersI'm close to a certified apollo partner but they say that you guys aren't compensating them as agreed anymore.
@@ShardstapoRotmgwhich one ?
Hate de recevoir le miens !
Does this upgrade kit only work on the 2023 Ghost, or older models too?
Just talked to Sim from their customer support and they suggested it was compatible with all ghost models.
Both 21 and 22 are supported.
When will this kit already be installed on the ghost?
Hi Aldous,
At this time, we only plan on selling the Ghost update as a separate upgrade kit :)
@@ApolloScootersthis is because the Phantom v3 is so much better than ghost, that they stopped producing them.
can this controller do 60V?
Hi Chronical,
The MACH 1 controller is only compatible for 52V