We can supply the weight together with the new float switch. If you need just the weight, you can try to check in the local stores to find the appropriate one for your float switch.
I need something like this to work with a US Solid ball valve. When the float is down I want power to go to the ball valve so it will open. When the float reaches the top of the tank, I want it to cut the power to the ball valve which will leave it closed. Will this work like that?
For your application, you could consider a float switch that is normally closed (NC) when the float is down and opens the circuit (cuts power) when the float rises. This type of switch will allow power to flow to your US Solid ball valve when the water level is low, causing it to open, and will cut the power, leaving the valve closed when the float reaches the top of the tank. Please ensure to verify the electrical specifications of the ball valve and the float switch to ensure they are compatible. You can find more information in our article: tameson.com/pages/float-switch or write on our support email support@tameson.com
Can you connect this float switch directly to a pump (to start and stop the pump according to the water level), or do you need a smart relay controler also?
Hello, to determine whether you can connect a float switch directly to a pump or if you need a smart relay controller, it depends on several factors including the type of pump, the specifications of the float switch, and the electrical requirements. Here are some general guidelines: 1. Direct Connection: - Low Power Pumps: For small, low-power pumps, you can often connect the float switch directly to the pump. The float switch acts as a simple on/off switch that opens or closes the circuit to the pump. - Float Switch Rating: Ensure that the float switch is rated for the voltage and current of the pump. If the switch can handle the electrical load, a direct connection is possible. 2. Using a Relay or Smart Controller: - High Power Pumps: For larger, high-power pumps, the float switch may not be able to handle the high current directly. In this case, a relay or smart controller is used to handle the high current while the float switch controls the relay. - Safety and Control: Using a relay or smart controller can offer additional safety features and control options. For example, smart controllers can provide delay functions, alarms, and other automation features.
Hello, for your application, you could consider a bi-stable float switch, which is designed to turn on at a lower position and off at a higher position. This type of switch is ideal for maintaining a specific liquid level within a tank or sump. You can view and purchase our range of changeover float switches directly from our website. Here is the link to the appropriate section for your convenience: tameson.com/collections/float-switches Feel free to browse through the options, and if you need any further advice or assistance in selecting the right product for your specific needs, do not hesitate to contact us.
Hello, you need to have flowmeter on the inlet pipeline. If you are thinking on the level measurement, you can use level sensors with signal transition.
Thanks a lot. I'm working on a 24v solar submersible with no controller so I guess this is the solution to turnoff when storage is full. Greatly appreciate your presentation.
Hi. The yellow cylinder is a counterweight that holds the float switch in a certain position. Based on the position of the counterweight and cable length, you can set different control levels in your tank.
We have options that can accommodate a fill range of 60 to 70 inches. I recommend visiting our float switch selection guide for detailed information: tameson.com/pages/float-switch-for-water-tank
question: I work with two switches, one for min and the other for max water tanks. Is it normal for both switches with weights to float, i.e. the min does not sink?
Hello, thank you for your question. Please send us an email (support@tameson.com) and tell us what product (ref.) it's about so we can answer your question. Thanks in advance!
Okay did I miss something , does normally on mean when it floating upright the contacts are touching and it's a closed switch?, And the pump goes on? Normally off means it goes on when it goes upside down, that's like the most important info of all.....I need to buy one that makes the pump go on when it's going downward and the water level is low so it turns on and fills the tank back up. Nothing in this helps me know what it's called
Normally open (NO) float switch: The electrical circuit within the switch remains open when the switch is at the bottom and closed in the ‘up’ position. So, the switch is open with gravity pulling it down and closes as the liquid level rises to the pre-set level. Normally closed (NC) float switch: The electrical circuit within the switch remains closed when the switch is at the bottom and open in the ‘up’ position. So, the switch is closed with gravity pulling it down and opens as the liquid level rises to the pre-set level. You can check more details in the article: tameson.com/pages/float-switch
how long is the warranty? how long it is safe from water, I am worried about the cable that drowns into the water. Will the water get inside over time?
To ensure proper installation, you will need to connect the float switch to the control box of your solar pump system. The float switch typically has two wires: one that connects to the power supply and the other to the pump controller. When the water reaches a certain level, the switch will trigger the pump to turn on or off accordingly.
Hello, if you use float switch with external weight the distance from the weight to the float switch depends on switch on and switch of level that you have in your tank.
Our float switches are liquid level switches but they are not certified according ANSI 71. You can check all details in our article: tameson.com/pages/float-switch
Hi. Thank you for your comment. This video shows basic working principles and explanations for the float switches. If you need any additional information you can visit our website or contact our support for help.
thanks for your helpfull information ❣️❤️❣️
Glad it was helpful!
❤
wat
simple, straight to the point
Thank you very good video.
Glad you liked it!
where can you purchase the weight to place on the line?
We can supply the weight together with the new float switch. If you need just the weight, you can try to check in the local stores to find the appropriate one for your float switch.
How to connect switch to turn off when the water in tank is full and to start when tank is empty? Do you have any simple picture how can i connect it?
Hello, you can find all the information about the wiring and setting up the float switch in our article: tameson.com/pages/float-switch-wiring
This is very educative, thanks for sharing it with us...
Glad you enjoyed it
I need something like this to work with a US Solid ball valve. When the float is down I want power to go to the ball valve so it will open. When the float reaches the top of the tank, I want it to cut the power to the ball valve which will leave it closed. Will this work like that?
For your application, you could consider a float switch that is normally closed (NC) when the float is down and opens the circuit (cuts power) when the float rises. This type of switch will allow power to flow to your US Solid ball valve when the water level is low, causing it to open, and will cut the power, leaving the valve closed when the float reaches the top of the tank.
Please ensure to verify the electrical specifications of the ball valve and the float switch to ensure they are compatible. You can find more information in our article: tameson.com/pages/float-switch or write on our support email support@tameson.com
Thanks for sharing it with us,..
Thanks for watching!
Very excellent
Thank you! Cheers!
Thanks for the video =)
Sure thing!
Can you connect this float switch directly to a pump (to start and stop the pump according to the water level), or do you need a smart relay controler also?
Hello, to determine whether you can connect a float switch directly to a pump or if you need a smart relay controller, it depends on several factors including the type of pump, the specifications of the float switch, and the electrical requirements. Here are some general guidelines:
1. Direct Connection:
- Low Power Pumps: For small, low-power pumps, you can often connect the float switch directly to the pump. The float switch acts as a simple on/off switch that opens or closes the circuit to the pump.
- Float Switch Rating: Ensure that the float switch is rated for the voltage and current of the pump. If the switch can handle the electrical load, a direct connection is possible.
2. Using a Relay or Smart Controller:
- High Power Pumps: For larger, high-power pumps, the float switch may not be able to handle the high current directly. In this case, a relay or smart controller is used to handle the high current while the float switch controls the relay.
- Safety and Control: Using a relay or smart controller can offer additional safety features and control options. For example, smart controllers can provide delay functions, alarms, and other automation features.
Thanks for detail desription...I need changeover float swich which can turn on in Lower possition and turn off on higher possition?where to buy?
Hello, for your application, you could consider a bi-stable float switch, which is designed to turn on at a lower position and off at a higher position. This type of switch is ideal for maintaining a specific liquid level within a tank or sump.
You can view and purchase our range of changeover float switches directly from our website. Here is the link to the appropriate section for your convenience:
tameson.com/collections/float-switches
Feel free to browse through the options, and if you need any further advice or assistance in selecting the right product for your specific needs, do not hesitate to contact us.
Very helpful news
Glad you think so!
Verry nice
Thanks
awesome vaiya
Thank you so much 😀
Thanks to you
Thank you!
Hello is there a way to measure the amount of water in a tank remotely?
Hello, you need to have flowmeter on the inlet pipeline. If you are thinking on the level measurement, you can use level sensors with signal transition.
Hi, I like your video. Thanks
Thank you too.
Can you run a switch like that with 12V?
Yes, these switches are also suitable for 12v applications.
Nice video
Thanks
Can it work on DC? Would you need a relay?
Hello! Yes, float switches work over both AC and DC.
Thanks a lot. I'm working on a 24v solar submersible with no controller so I guess this is the solution to turnoff when storage is full.
Greatly appreciate your presentation.
but what does the yellow cylinder do?
Hi. The yellow cylinder is a counterweight that holds the float switch in a certain position. Based on the position of the counterweight and cable length, you can set different control levels in your tank.
What is the fill range of the float switch? We are looking for a range 60 to 70 inches.
We have options that can accommodate a fill range of 60 to 70 inches. I recommend visiting our float switch selection guide for detailed information: tameson.com/pages/float-switch-for-water-tank
nice video
Thanks for the visit, please see our other videos if you liked it!
question: I work with two switches, one for min and the other for max water tanks. Is it normal for both switches with weights to float, i.e. the min does not sink?
Hello, thank you for your question. Please send us an email (support@tameson.com) and tell us what product (ref.) it's about so we can answer your question. Thanks in advance!
Okay did I miss something , does normally on mean when it floating upright the contacts are touching and it's a closed switch?, And the pump goes on? Normally off means it goes on when it goes upside down, that's like the most important info of all.....I need to buy one that makes the pump go on when it's going downward and the water level is low so it turns on and fills the tank back up. Nothing in this helps me know what it's called
Normally open (NO) float switch: The electrical circuit within the switch remains open when the switch is at the bottom and closed in the ‘up’ position. So, the switch is open with gravity pulling it down and closes as the liquid level rises to the pre-set level.
Normally closed (NC) float switch: The electrical circuit within the switch remains closed when the switch is at the bottom and open in the ‘up’ position. So, the switch is closed with gravity pulling it down and opens as the liquid level rises to the pre-set level.
You can check more details in the article: tameson.com/pages/float-switch
how long is the warranty? how long it is safe from water, I am worried about the cable that drowns into the water. Will the water get inside over time?
We offer a 2 year warranty on manufacturing defects for all products. View terms here: tameson.com/terms-and-conditions.html
@@Tameson wow that's great
Can it withstand 150 degree water?
Hi, our range of float switches can withstand maximum 60 °C temperature.
How can I connect float swith to inbuilt submisble sollar pump
To ensure proper installation, you will need to connect the float switch to the control box of your solar pump system. The float switch typically has two wires: one that connects to the power supply and the other to the pump controller. When the water reaches a certain level, the switch will trigger the pump to turn on or off accordingly.
Thanks for the video really it's very useful video sir...I've one question how much distance we need keep b/w yellow colour and blue colour??
Hello, if you use float switch with external weight the distance from the weight to the float switch depends on switch on and switch of level that you have in your tank.
Distance in the switch off when the tank is enpty
Make it longer, how are r
The float switches connected
We are working on a new video, stay tuned!
Can you provide us canadian market diller and in bangladesh market diller.
And about price in us doller
Hello, Tameson is online store and we do not have dealers. You can order all our products online: shop.tameson.com/
Nice.. voice bro.
What is Your Name of your country
Thanks - Tameson is a company in the Netherlands.
ANSI 71?
Our float switches are liquid level switches but they are not certified according ANSI 71. You can check all details in our article: tameson.com/pages/float-switch
👍
Thanks :)
None sense tutorial, what I only understand is it detect water level
Hi. Thank you for your comment. This video shows basic working principles and explanations for the float switches. If you need any additional information you can visit our website or contact our support for help.
very handsome young man
Thanks for your comment.
ton non c'est koi
Hello, thanks for your comment. For any additional info, please contact support@tameson.com
Didn't help.
Thanks for the comment. If you need any additional info, please contact us at support@tameson.com